arXiv subjects

C. Hottier

Publications and source records attributed to C. Hottier.

8 recordsLinked to original sources

arXiv2026

Gaia DR3 high radial velocity stars: Genuine fast-moving objects or outliers?

The third Gaia data release includes 33.8 million radial velocity measurements, extending to a magnitude of G_RVS = 14. To reach this magnitude limit, spectra were processed down to a signal-to-noise ratio (S/N) of 2. In this very low S/N regime, noise-induced peaks in the cross-correlation function can result in spurious radial velocity determinations. Quality filters were applied to the dataset to mitigate such artefacts as much as possible prior to publication. Nevertheless, the high radial velocity (HRV) stars -- defined here as those with radial velocities below -500 or above +500 km/s -- are so sparsely populated that even a few hundred spurious measurements can lead to significant contamination. The objectives of the present study are as follows: (i) to confirm or refute the radial velocity values of the order of one hundred Gaia DR3 HRV stars, (ii) to evaluate the rate of spurious radial velocities in the Gaia DR3 catalogue as a function of S/N and radial velocity, and (iii) to examine the properties of the genuine HRV stars. A total of 134 Gaia DR3 HRV stars were observed using the SOPHIE and UVES spectrographs. (abridged) Ground-based measurements confirm the Gaia DR3 radial velocities of 104 out of our 134 targets, and they refute those of the remaining 30. The combination of these data with the spectroscopic surveys mentioned above enabled an assessment of the rate of spurious measurements as a function of S/N and across three intervals of absolute value of the radial velocity. (abridged) The majority of these stars follow retrograde orbits. Their location in the energy-vertical component of the angular momentum diagram coincides with the region where several structures associated with past merging events have been identified: Sequoia, Arjuna and I'itoi, Antaeus, ED-2, and ED-3. It is likely that most of these HRV stars were accreted.

astro-ph.SR↗

arXiv2023

Toward a 3D kinetic tomography of Taurus clouds: II. A new automated technique and its validation

Three-dimensional (3D) kinetic maps of the Milky Way interstellar medium are an essential tool in studies of its structure and of star formation. We aim to assign radial velocities to Galactic interstellar clouds now spatially localized based on starlight extinction and star distances from Gaia and stellar surveys. We developed an automated search for coherent projections on the sky of clouds isolated in 3D extinction density maps on the one hand, and regions responsible for CO radio emissions at specific Doppler shifts on the other hand. The discrete dust structures were obtained by application of the Fellwalker algorithm to a recent 3D extinction density map. For each extinction cloud, a technique using a narrow sliding spectral window moved along the contour-bounded CO spectrum and geometrical criteria was used to select the most likely velocity interval. We applied the new contour-based technique to the 3D extinction density distribution within the volume encompassing the Taurus, Auriga, Perseus and California molecular complexes. From the 45 clouds issued from the decomposition, 42 were assigned a velocity. The remaining structures correspond to very weak CO emission or extinction. We used the non-automated assignments of radial velocities to clouds of the same region presented in paper I and based on KI absorption spectra as a validation test. The new fully automated determinations were found in good agreement with these previous measurements. Our results show that an automated search based on cloud contour morphology can be efficient and that this novel technique may be extended to wider regions of the Milky Way and at larger distance. We discuss its limitations and potential improvements after combination with other techniques.

astro-ph.GA↗

arXiv2022

Gaia Data Release 3 Properties and validation of the radial velocities

Gaia Data Release 3 (Gaia DR3) contains the second release of the combined radial velocities. It is based on the spectra collected during the first 34 months of the nominal mission. The longer time baseline and the improvements of the pipeline made it possible to push the processing limit, from Grvs = 12 in Gaia DR2, to Grvs = 14 mag. In this article, we describe the new functionalities implemented for Gaia DR3, the quality filters applied during processing and post-processing and the properties and performance of the published velocities. For Gaia DR3, several functionalities were upgraded or added. (Abridged) Gaia DR3 contains the combined radial velocities of 33 812 183 stars. With respect to Gaia DR2, the interval of temperature has been expanded from Teff \in [3600, 6750] K to Teff \in [3100, 14500] K for the bright stars ( Grvs \leq 12 mag) and [3100, 6750] K for the fainter stars. The radial velocities sample a significant part of the Milky Way: they reach a few kilo-parsecs beyond the Galactic centre in the disc and up to about 10-15 kpc vertically into the inner halo. The median formal precision of the velocities is of 1.3 km/s at Grvs = 12 and 6.4 km/s at Grvs = 14 mag. The velocity zero point exhibits a small systematic trend with magnitude starting around Grvs = 11 mag and reaching about 400 m/s at Grvs = 14 mag. A correction formula is provided, which can be applied to the published data. The Gaia DR3 velocity scale is in satisfactory agreement with APOGEE, GALAH, GES and RAVE, with systematic differences that mostly do not exceed a few hundreds m/s. The properties of the radial velocities are also illustrated with specific objects: open clusters, globular clusters as well as the Large Magellanic Cloud (LMC). For example, the precision of the data allows to map the line-of-sight rotational velocities of the globular cluster 47 Tuc and of the LMC.

astro-ph.GA↗

arXiv2021

FEDReD III : Unraveling the 3D structure of Vela

Context. The Vela complex is a region of the sky that gathers several stellar and interstellar structures in a few hundred square degrees. Aims. Gaia data now allows us to obtain a 3D view of the Vela interstellar structures through the dust extinction. Methods. We used the FEDReD (Field Extinction-Distance Relation Deconvolver) algorithm on near-infrared 2MASS data, cross-matched with the Gaia DR2 catalogue, to obtain a 3D cube of extinction density. We applied the FellWalker algorithm on this cube to locate clumps and dense structures. Results. We analysed 18 million stars on $450~\mathrm{deg}^2$ to obtain the extinction density of the Vela complex from 0.5 to 8~kpc at $\ell\in[250\degr,280\degr]$ and $b\in[$-10$\degr,5\degr]$. This cube reveals the complete morphology of known structures and relations between them. In particular, we show that the Vela Molecular Ridge is more likely composed by three substructures instead of four, as suggested by the 2D densities. These substructures form the shell of a large cavity. This cavity is visually aligned with the Vela supernova remnant but located at a larger distance. We provide a catalogue of location, distance, size and total dust content of ISM clumps that we extracted from the extinction density cube.

astro-ph.GA↗

arXiv2021

Towards a 3D kinetic tomography of Taurus clouds: I -- Linking neutral potassium and dust

Results. We illustrate our profile-fitting technique and present the K\,{\sc i} velocity structure of the dense ISM along the paths to all targets. As a validation test of the dust map, we show comparisons between distances to several reconstructed clouds with recent distance assignments based on different techniques. Target star extinctions estimated by integration in the 3D map are compared with their K\,{\sc i} 7699 A absorptions and the degree of correlation is found comparable to the one between the same K\,{\sc i} line and the total hydrogen column for stars distributed over the sky that are part of a published high resolution survey. We show images of the updated dust distribution in a series of vertical planes in the Galactic longitude interval 150-182.5 deg and our estimated assignments of radial velocities to the opaque regions. Most clearly defined K\,{\sc i} absorptions may be assigned to a dense dust cloud between the Sun and the target star. It appeared relatively straightforward to find a velocity pattern consistent will all absorptions and ensuring coherence between adjacent lines of sight, at the exception of a few weak lines. We compare our results with recent determinations of velocities of several clouds and find good agreement. These results demonstrate that the extinction-K\,{\sc i} relationship is tight enough to allow linking the radial velocity of the K\,{\sc i} lines to the dust clouds seen in 3D, and that their combination may be a valuable tool in building a 3D kinetic structure of the dense ISM. We discuss limitations and perspectives for this technique.

astro-ph.GA↗

arXiv2020

FEDReD I: 3D extinction and stellar maps by Bayesian deconvolution

Context. While Gaia enables to probe in great detail the extended local neighbourhood, the thin disk structure at larger distances remains sparsely explored. Aims. We aim here to build a non-parametric 3D model of the thin disc structures handling both the extinction and the stellar density simultaneously. Methods. We developed a Bayesian deconvolution method in two dimensions: extinction and distance. It uses a reference catalogue which completeness information defines the selection function. It is designed so that any complementary information from other catalogues can be added. It has also been designed to be robust to outliers, frequent in crowded fields, and differential extinction. The prior information is designed to be minimal: only a reference H-R diagram. We derived for this an empirical H-R diagram of the thin disk using Gaia DR2 data and synthetic isochrone-based H-R diagrams can also be used. Results. We validated the method on simulations and real fields using 2MASS and UKIDSS data complemented by Gaia DR2 photometry and parallaxes. We detail the results of two test fields: a 2MASS field centred around the NGC 4815 open cluster which shows an over-density of both extinction and stellar density at the cluster distance, and a UKIDSS field at $l=10^{\circ}$ where we recover the position of the Galactic bar.

astro-ph.GA↗

arXiv2020

FEDReD II : 3D Extinction Map with 2MASS and Gaia DR2 data

Aims. We aim to map the 3D distribution of the interstellar extinction of the Milky Way disk up to distances larger than those probed with the Gaia parallax alone. Methods. We apply the FEDReD (Field Extinction-Distance Relation Deconvolver) algorithm to the 2MASS near-infrared photometry together with the Gaia DR2 astrometry and photometry. This algorithm uses a Bayesian deconvolution approach, based on an empirical HR-diagram representative of the local thin disk, in order to map the extinction as a function of distance of various fields of view. Results. We analysed more than 5.6 million stars to obtain an extinction map of the entire Galactic disk within $|b|<0.24^{\circ}$. This map provides information up to $5~\mathrm{kpc}$ in the direction of the Galactic centre and at more than $7~\mathrm{kpc}$ in the direction of the anticentre. This map reveals the complete shape of structures known locally, such as the Vela complex or the split of the local arm. Furthermore our extinction map shows many large "clean bubbles" especially one in the Sagittarius -- Carina complex, and four others which define a structure that we nickname the butterfly.

astro-ph.GA↗

arXiv2019

Gaia-2MASS 3D maps of Galactic interstellar dust within 3 kpc

Gaia data are revolutionizing our knowledge of the evolutionary history of the Milky Way. 3D maps of the interstellar dust provide complementary information and are a tool for a wide range of uses. We aimed at building 3D maps of the dust in the Local arm and surrounding regions. To do so, Gaia DR2 photometric data were combined with 2MASS measurements to derive extinction towards stars that possess accurate photometry and relative uncertainties on DR2 parallaxes smaller than 20\%. We applied to the extinctions a new hierarchical inversion algorithm adapted to large datasets and to a inhomogeneous target distribution. Each step associates regularized Bayesian inversions along radial directions and a subsequent inversion in 3D of their results. Each inverted distribution serves as a prior for the subsequent step and the spatial resolution is progressively increased. We present the resulting 3D distribution of the dust in a 6 x 6 x 0.8 kpc3 volume around the Sun. Its main features are found to be elongated along different directions that vary from below to above the mid-plane: the outer part of Carina-Sagittarius, mainly located above the mid-plane, the Local arm/Cygnus Rift around and above the mid-plane and the fragmented Perseus arm are oriented close to the direction of circular motion. The long spur (nicknamed the split) that extends between the Local Arm and Carina-Sagittarius, the compact near side of Carina-Sagittarius and the Cygnus Rift below the Plane are oriented along l=40 to 55 deg. Dust density images in vertical planes reveal in some regions a wavy pattern and show that the solar neighborhood within 500 pc remains atypical by its extent above and below the Plane. We show several comparisons with the locations of molecular clouds, HII regions, O stars and masers. The link between the dust concentration and these tracers is markedly different from one region to the other.

astro-ph.GA↗