arXiv subjects

C. J. Russell

Publications and source records attributed to C. J. Russell.

15 recordsLinked to original sources

arXiv2023

Searching for continuous Gravitational Waves in the second data release of the International Pulsar Timing Array

The International Pulsar Timing Array 2nd data release is the combination of datasets from worldwide collaborations. In this study, we search for continuous waves: gravitational wave signals produced by individual supermassive black hole binaries in the local universe. We consider binaries on circular orbits and neglect the evolution of orbital frequency over the observational span. We find no evidence for such signals and set sky averaged 95% upper limits on their amplitude h 95 . The most sensitive frequency is 10nHz with h 95 = 9.1 10-15 . We achieved the best upper limit to date at low and high frequencies of the PTA band thanks to improved effective cadence of observations. In our analysis, we have taken into account the recently discovered common red noise process, which has an impact at low frequencies. We also find that the peculiar noise features present in some pulsars data must be taken into account to reduce the false alarm. We show that using custom noise models is essential in searching for continuous gravitational wave signals and setting the upper limit.

gr-qc↗

arXiv2022

The International Pulsar Timing Array second data release: Search for an isotropic Gravitational Wave Background

We searched for an isotropic stochastic gravitational wave background in the second data release of the International Pulsar Timing Array, a global collaboration synthesizing decadal-length pulsar-timing campaigns in North America, Europe, and Australia. In our reference search for a power law strain spectrum of the form $h_c = A(f/1\,\mathrm{yr}^{-1})^α$, we found strong evidence for a spectrally-similar low-frequency stochastic process of amplitude $A = 3.8^{+6.3}_{-2.5}\times10^{-15}$ and spectral index $α= -0.5 \pm 0.5$, where the uncertainties represent 95\% credible regions, using information from the auto- and cross-correlation terms between the pulsars in the array. For a spectral index of $α= -2/3$, as expected from a population of inspiralling supermassive black hole binaries, the recovered amplitude is $A = 2.8^{+1.2}_{-0.8}\times10^{-15}$. Nonetheless, no significant evidence of the Hellings-Downs correlations that would indicate a gravitational-wave origin was found. We also analyzed the constituent data from the individual pulsar timing arrays in a consistent way, and clearly demonstrate that the combined international data set is more sensitive. Furthermore, we demonstrate that this combined data set produces comparable constraints to recent single-array data sets which have more data than the constituent parts of the combination. Future international data releases will deliver increased sensitivity to gravitational wave radiation, and significantly increase the detection probability.

astro-ph.HE↗

arXiv2021

81 New Candidate Fast Radio Bursts in Parkes Archive

We have searched for weak fast radio burst (FRB) events using a database containing 568,736,756 transient events detected using the Parkes radio telescope between 1997 and 2001. In order to classify these pulses, and to identify likely FRB candidates, we used a machine learning algorithm based on ResNet. We identified 81 new candidate FRBs and provide details of their positions, event times, and dispersion measures. These events were detected in only one beam of the Parkes multibeam receiver. We used a relatively low S/N cutoff threshold when selecting these bursts and some have dispersion measures only slightly exceeding the expected Galactic contribution. We therefore present these candidate FRBs as a guide for follow-up observations in the search for repeating FRBs.

astro-ph.HE↗

arXiv2021

On the evidence for a common-spectrum process in the search for the nanohertz gravitational-wave background with the Parkes Pulsar Timing Array

A nanohertz-frequency stochastic gravitational-wave background can potentially be detected through the precise timing of an array of millisecond pulsars. This background produces low-frequency noise in the pulse arrival times that would have a characteristic spectrum common to all pulsars and a well-defined spatial correlation. Recently the North American Nanohertz Observatory for Gravitational Waves collaboration (NANOGrav) found evidence for the common-spectrum component in their 12.5-year data set. Here we report on a search for the background using the second data release of the Parkes Pulsar Timing Array. If we are forced to choose between the two NANOGrav models $\unicode{x2014}$ one with a common-spectrum process and one without $\unicode{x2014}$ we find strong support for the common-spectrum process. However, in this paper, we consider the possibility that the analysis suffers from model misspecification. In particular, we present simulated data sets that contain noise with distinctive spectra but show strong evidence for a common-spectrum process under the standard assumptions. The Parkes data show no significant evidence for, or against, the spatially correlated Hellings-Downs signature of the gravitational-wave background. Assuming we did observe the process underlying the spatially uncorrelated component of the background, we infer its amplitude to be $A = 2.2^{+0.4}_{-0.3} \times 10^{-15}$ in units of gravitational-wave strain at a frequency of $1\, \text{yr}^{-1}$. Extensions and combinations of existing and new data sets will improve the prospects of identifying spatial correlations that are necessary to claim a detection of the gravitational-wave background.

astro-ph.HE↗

arXiv2021

The Parkes pulsar timing array second data release: Timing analysis

The main goal of pulsar timing array experiments is to detect correlated signals such as nanohertz-frequency gravitational waves. Pulsar timing data collected in dense monitoring campaigns can also be used to study the stars themselves, their binary companions, and the intervening ionised interstellar medium. Timing observations are extraordinarily sensitive to changes in path length between the pulsar and the Earth, enabling precise measurements of the pulsar positions, distances and velocities, and the shapes of their orbits. Here we present a timing analysis of 25 pulsars observed as part of the Parkes Pulsar Timing Array (PPTA) project over time spans of up to 24 yr. The data are from the second data release of the PPTA, which we have extended by including legacy data. We make the first detection of Shapiro delay in four Southern pulsars (PSRs J1017$-$7156, J1125$-$6014, J1545$-$4550, and J1732$-$5049), and of parallax in six pulsars. The prominent Shapiro delay of PSR J1125$-$6014 implies a neutron star mass of $M_p = 1.5 \pm 0.2 M_\odot$ (68% credibility interval). Measurements of both Shapiro delay and relativistic periastron advance in PSR J1600$-$3053 yield a large but uncertain pulsar mass of $M_p = 2.06^{+0.44}_{-0.41}$ M$_\odot$ (68% credibility interval). We measure the distance to PSR J1909$-$3744 to a precision of 10 lyr, indicating that for gravitational wave periods over a decade, the pulsar provides a coherent baseline for pulsar timing array experiments.

astro-ph.HE↗

arXiv2020

Identifying and mitigating noise sources in precision pulsar timing data sets

Pulsar timing array projects measure the pulse arrival times of millisecond pulsars for the primary purpose of detecting nanohertz-frequency gravitational waves. The measurements include contributions from a number of astrophysical and instrumental processes, which can either be deterministic or stochastic. It is necessary to develop robust statistical and physical models for these noise processes because incorrect models diminish sensitivity and may cause a spurious gravitational wave detection. Here we characterise noise processes for the 26 pulsars in the second data release of the Parkes Pulsar Timing Array using Bayesian inference. In addition to well-studied noise sources found previously in pulsar timing array data sets such as achromatic timing noise and dispersion measure variations, we identify new noise sources including time-correlated chromatic noise that we attribute to variations in pulse scattering. We also identify "exponential dip" events in four pulsars, which we attribute to magnetospheric effects as evidenced by pulse profile shape changes observed for three of the pulsars. This includes an event in PSR J1713$+$0747, which had previously been attributed to interstellar propagation. We present noise models to be used in searches for gravitational waves. We outline a robust methodology to evaluate the performance of noise models and identify unknown signals in the data. The detection of variations in pulse profiles highlights the need to develop efficient profile domain timing methods.

astro-ph.HE↗

arXiv2020

Applying saliency-map analysis in searches for pulsars and fast radio bursts

To investigate the use of saliency-map analysis to aid in searches for transient signals, such as fast radio bursts and individual pulses from radio pulsars. We aim to demonstrate that saliency maps provide the means to understand predictions from machine learning algorithms and can be implemented in piplines used to search for transient events. We have implemented a new deep learning methodology to predict whether or not any segment of the data contains a transient event. The algorithm has been trained using real and simulated data sets. We demonstrate that the algorithm is able to identify such events. The output results are visually analysed via the use of saliency maps. We find that saliency maps can produce an enhanced image of any transient feature without the need for de-dispersion or removal of radio frequency interference. Such maps can be used to understand which features in the image were used in making the machine learning decision and to visualise the transient event. Even though the algorithm reported here was developed to demonstrate saliency-map analysis, we have detected, in archival data, a single burst event with dispersion measure of $41$\,cm$^{-3}$pc that is not associated with any currently known pulsar.

astro-ph.IM↗

arXiv2020

Parkes transient events: I. Database of single pulses, initial results and missing FRBs

A large number of observations from the Parkes 64\,m-diameter radio telescope, recorded with high time resolution, are publicly available. We have re-processed all of the observations obtained during the first four years (from 1997 to 2001) of the Parkes Multibeam receiver system in order to identify transient events and have built a database that records the 568,736,756 pulse candidates generated during this search. We have discovered a new fast radio burst (FRB), FRB~010305, with a dispersion measure of 350$\pm$5\,\,cm$^{-3}\,$pc and explored why so few FRBs have been discovered in data prior to 2001. After accounting for the dispersion smearing across the channel bandwidth and the sky regions surveyed, the number of FRBs is found to be consistent with model predictions. We also present five single pulse candidates from unknown sources, but with Galactic dispersion measures. We extract a diverse range of sources from the database, which can be used, for example, as a training set of data for new software being developed to search for FRBs in the presence of radio frequency interference.

astro-ph.HE↗

arXiv2020

The Parkes Pulsar Timing Array Project: Second data release

We describe 14 years of public data from the Parkes Pulsar Timing Array (PPTA), an ongoing project that is producing precise measurements of pulse times of arrival from 26 millisecond pulsars using the 64-m Parkes radio telescope with a cadence of approximately three weeks in three observing bands. A comprehensive description of the pulsar observing systems employed at the telescope since 2004 is provided, including the calibration methodology and an analysis of the stability of system components. We attempt to provide full accounting of the reduction from the raw measured Stokes parameters to pulse times of arrival to aid third parties in reproducing our results. This conversion is encapsulated in a processing pipeline designed to track provenance. Our data products include pulse times of arrival for each of the pulsars along with an initial set of pulsar parameters and noise models. The calibrated pulse profiles and timing template profiles are also available. These data represent almost 21,000 hrs of recorded data spanning over 14 years. After accounting for processes that induce time-correlated noise, 22 of the pulsars have weighted root-mean-square timing residuals of < 1 $μ$s in at least one radio band. The data should allow end users to quickly undertake their own gravitational-wave analyses (for example) without having to understand the intricacies of pulsar polarisation calibration or attain a mastery of radio-frequency interference mitigation as is required when analysing raw data files.

astro-ph.IM↗

arXiv2019

A pulsar-based timescale from the International Pulsar Timing Array

We have constructed a new timescale, TT(IPTA16), based on observations of radio pulsars presented in the first data release from the International Pulsar Timing Array (IPTA). We used two analysis techniques with independent estimates of the noise models for the pulsar observations and different algorithms for obtaining the pulsar timescale. The two analyses agree within the estimated uncertainties and both agree with TT(BIPM17), a post-corrected timescale produced by the Bureau International des Poids et Mesures (BIPM). We show that both methods could detect significant errors in TT(BIPM17) if they were present. We estimate the stability of the atomic clocks from which TT(BIPM17) is derived using observations of four rubidium fountain clocks at the US Naval Observatory. Comparing the power spectrum of TT(IPTA16) with that of these fountain clocks suggests that pulsar-based timescales are unlikely to contribute to the stability of the best timescales over the next decade, but they will remain a valuable independent check on atomic timescales. We also find that the stability of the pulsar-based timescale is likely to be limited by our knowledge of solar-system dynamics, and that errors in TT(BIPM17) will not be a limiting factor for the primary goal of the IPTA, which is to search for the signatures of nano-Hertz gravitational waves.

astro-ph.IM↗

arXiv2019

The International Pulsar Timing Array: Second data release

In this paper, we describe the International Pulsar Timing Array second data release, which includes recent pulsar timing data obtained by three regional consortia: the European Pulsar Timing Array, the North American Nanohertz Observatory for Gravitational Waves, and the Parkes Pulsar Timing Array. We analyse and where possible combine high-precision timing data for 65 millisecond pulsars which are regularly observed by these groups. A basic noise analysis, including the processes which are both correlated and uncorrelated in time, provides noise models and timing ephemerides for the pulsars. We find that the timing precisions of pulsars are generally improved compared to the previous data release, mainly due to the addition of new data in the combination. The main purpose of this work is to create the most up-to-date IPTA data release. These data are publicly available for searches for low-frequency gravitational waves and other pulsar science.

astro-ph.HE↗

arXiv2019

Commensal discovery of four Fast Radio Bursts during Parkes Pulsar Timing Array observations

The Parkes Pulsar Timing Array (PPTA) project monitors two dozen millisecond pulsars (MSPs) in order to undertake a variety of fundamental physics experiments using the Parkes 64m radio telescope. Since June 2017 we have been undertaking commensal searches for fast radio bursts (FRBs) during the MSP observations. Here, we report the discovery of four FRBs (171209, 180309, 180311 and 180714). The detected events include an FRB with the highest signal-to-noise ratio ever detected at the Parkes observatory, which exhibits unusual spectral properties. All four FRBs are highly polarized. We discuss the future of commensal searches for FRBs at Parkes.

astro-ph.HE↗

arXiv2019

A new fast radio burst in the datasets containing the Lorimer burst

We report the discovery of a new fast radio burst (FRB), FRB~010312, in archival data from a 1.4\,GHz survey of the Magellanic Clouds using the multibeam receiver on the Parkes 64\,m-diameter radio telescope. These data sets include the Lorimer burst (FRB~010724), which it pre-dates and which we also re-detect. The new burst has a much higher dispersion measure of 1187\,cm$^{-3}$pc. The burst is one of the broadest found to date, the second earliest FRB known, and the ninth FRB discovered with a dispersion measure larger than 1000\,cm$^{-3}\,$pc. Our discovery indicates that there are likely to be more burst events still to be found in the existing Parkes data archive.

astro-ph.HE↗

arXiv2018

Search for a Radio Pulsar in the Remnant of Supernova 1987A

We have observed the remnant of supernova SN~1987A (SNR~1987A), located in the Large Magellanic Cloud (LMC), to search for periodic and/or transient radio emission with the Parkes 64\,m-diameter radio telescope. We found no evidence of a radio pulsar in our periodicity search and derived 8$σ$ upper bounds on the flux density of any such source of $31\,μ$Jy at 1.4~GHz and $21\,μ$Jy at 3~GHz. Four candidate transient events were detected with greater than $7σ$ significance, with dispersion measures (DMs) in the range 150 to 840\,cm$^{-3}\,$pc. For two of them, we found a second pulse at slightly lower significance. However, we cannot at present conclude that any of these are associated with a pulsar in SNR~1987A. As a check on the system, we also observed PSR~B0540$-$69, a young pulsar which also lies in the LMC. We found eight giant pulses at the DM of this pulsar. We discuss the implications of these results for models of the supernova remnant, neutron star formation and pulsar evolution.

astro-ph.HE↗

arXiv2017

Comparison of Pulsar Positions from Timing and Very Long Baseline Astrometry

Pulsar positions can be measured with high precision using both pulsar timing methods and very-long-baseline interferometry (VLBI). Pulsar timing positions are referenced to a solar-system ephemeris, whereas VLBI positions are referenced to distant quasars. Here we compare pulsar positions from published VLBI measurements with those obtained from pulsar timing data from the Nanshan and Parkes radio telescopes in order to relate the two reference frames. We find that the timing positions differ significantly from the VLBI positions (and also differ between different ephemerides). A statistically significant change in the obliquity of the ecliptic of $2.16\pm0.33$\,mas is found for the JPL ephemeris DE405, but no significant rotation is found in subsequent JPL ephemerides. The accuracy with which we can relate the two frames is limited by the current uncertainties in the VLBI reference source positions and in matching the pulsars to their reference source. Not only do the timing positions depend on the ephemeris used in computing them, but also different segments of the timing data lead to varying position estimates. These variations are mostly common to all ephemerides, but slight changes are seen at the 10$μ$as level between ephemerides.

astro-ph.HE↗