arXiv subjects

C. J. Xin

Publications and source records attributed to C. J. Xin.

11 recordsLinked to original sources

arXiv2025

A sub-volt near-IR lithium tantalate electro-optic modulator

We demonstrate a low-loss integrated electro-optic Mach-Zehnder modulator in thin-film lithium tantalate at 737 nm, featuring a low half-wave voltage-length product of 0.65 V$\cdot$cm, an extinction ratio of 30 dB, low optical loss of 5.3 dB, and a detector-limited bandwidth of 20 GHz. A small $<2$ dB DC bias drift relative to quadrature bias is measured over 16 minutes using 4.3 dBm of on-chip power in ambient conditions, which outperforms the 8 dB measured using a counterpart thin-film lithium niobate modulator. Finally, an optical loss coefficient of 0.5 dB/cm for a thin-film lithium tantalate waveguide is estimated at 638 nm using a fabricated ring resonator.

physics.optics↗

arXiv2025

Robust Poling and Frequency Conversion on Thin-Film Periodically Poled Lithium Tantalate

We explore a robust fabrication process for periodically-poled thin-film lithium tantalate (PP-TFLT) by systematically varying fabrication parameters and confirming the quality of inverted domains with second-harmonic microscopy (SHM). We find a periodic poling recipe that can be applied to both acoustic-grade and optical-grade film, electrode material, and presence of an oxide interlayer. By using a single high-voltage electrical pulse with peak voltage time of 10 ms or less and a ramp-down time of 90 s, rectangular poling domains are established and stabilized in the PP-TFLT. We employ our robust periodic poling process in a controllable pole-after-etch approach to produce PP-TFLT ridge waveguides with normalized second harmonic generation (SHG) conversion efficiencies of 208 %W-1cm-2 from 1550 nm to 775 nm in line with the theoretical value of 244 %W-1cm-2. This work establishes a high-performance poling process and demonstrates telecommunications band SHG for thin-film lithium tantalate, expanding the capabilities of the platform for frequency mixing applications in quantum photonics, sensing, and spectroscopy.

physics.optics↗

arXiv2025

Milliwatt-level UV generation using sidewall poled lithium niobate

Integrated coherent sources of ultra-violet (UV) light are essential for a wide range of applications, from ion-based quantum computing and optical clocks to gas sensing and microscopy. Conventional approaches that rely on UV gain materials face limitations in terms of wavelength versatility; in response frequency upconversion approaches that leverage various optical nonlinearities have received considerable attention. Among these, the integrated thin-film lithium niobate (TFLN) photonic platform shows particular promise owing to lithium niobate's transparency into the UV range, its strong second order nonlinearity, and high optical confinement. However, to date, the high propagation losses and lack of reliable techniques for consistent poling of cm-long waveguides with small poling periods have severely limited the utility of this platform. Here we present a sidewall poled lithium niobate (SPLN) waveguide approach that overcomes these obstacles and results in a more than two orders of magnitude increase in generated UV power compared to the state-of-the-art. Our UV SPLN waveguides feature record-low propagation losses of 2.3 dB/cm, complete domain inversion of the waveguide cross-section, and an optimum 50% duty cycle, resulting in a record-high normalized conversion efficiency of 5050 %W$^{-1}$cm$^{-2}$, and 4.2 mW of generated on-chip power at 390 nm wavelength. This advancement makes the TFLN photonic platform a viable option for high-quality on-chip UV generation, benefiting emerging applications.

physics.optics↗

arXiv2025

Coherent control of a superconducting qubit using light

Quantum communications technologies require a network of quantum processors connected with low loss and low noise communication channels capable of distributing entangled states. Superconducting microwave qubits operating in cryogenic environments have emerged as promising candidates for quantum processor nodes. However, scaling these systems is challenging because they require bulky microwave components with high thermal loads that can quickly overwhelm the cooling power of a dilution refrigerator. Telecommunication frequency optical signals, meanwhile, can be fabricated in significantly smaller form factors while avoiding challenges due to high signal loss, noise sensitivity, and thermal loads due to their high carrier frequency and propagation in silica optical fibers. Transduction of information via coherent links between optical and microwave frequencies is therefore critical to leverage the advantages of optics for superconducting microwave qubits, while also enabling superconducting processors to be linked with low-loss optical interconnects. Here, we demonstrate coherent optical control of a superconducting qubit. We achieve this by developing a microwave-optical quantum transducer that operates with up to 1.18% conversion efficiency with low added microwave noise, and demonstrate optically-driven Rabi oscillations in a superconducting qubit.

quant-ph↗

arXiv2024

A Thin Film Lithium Niobate Near-Infrared Platform for Multiplexing Quantum Nodes

Practical quantum networks will require quantum nodes consisting of many memory qubits. This in turn will increase the complexity of the photonic circuits needed to control each qubit and will require strategies to multiplex memories and overcome the inhomogeneous distribution of their transition frequencies. Integrated photonics operating at visible to near-infrared (VNIR) wavelength range, compatible with the transition frequencies of leading quantum memory systems, can provide solutions to these needs. In this work, we realize a VNIR thin-film lithium niobate (TFLN) integrated photonics platform with the key components to meet these requirements. These include low-loss couplers ($<$ 1 dB/facet), switches ($>$ 20 dB extinction), and high-bandwidth electro-optic modulators ($>$ 50 GHz). With these devices we demonstrate high-efficiency and CW-compatible frequency shifting ($>$ 50 $\%$ efficiency at 15 GHz), as well as simultaneous laser amplitude and frequency control through a nested modulator structure. Finally, we highlight an architecture for multiplexing quantum memories using the demonstrated TFLN components, and outline how this platform can enable a 2-order of magnitude improvement in entanglement rates over single memory nodes. Our results demonstrate that TFLN can meet the necessary performance and scalability benchmarks to enable large-scale quantum nodes.

physics.optics↗

arXiv2024

Wavelength-accurate and wafer-scale process for nonlinear frequency mixers in thin-film lithium niobate

Recent advancements in thin-film lithium niobate (TFLN) photonics have led to a new generation of high-performance electro-optic devices, including modulators, frequency combs, and microwave-to-optical transducers. However, the broader adoption of TFLN-based devices that rely on all-optical nonlinearities have been limited by the sensitivity of quasi-phase matching (QPM), realized via ferroelectric poling, to fabrication tolerances. Here, we propose a scalable fabrication process aimed at improving the wavelength-accuracy of optical frequency mixers in TFLN. In contrast to the conventional pole-before-etch approach, we first define the waveguide in TFLN and then perform ferroelectric poling. This sequence allows for precise metrology before and after waveguide definition to fully capture the geometry imperfections. Systematic errors can also be calibrated by measuring a subset of devices to fine-tune the QPM design for remaining devices on the wafer. Using this method, we fabricated a large number of second harmonic generation devices aimed at generating 737 nm light, with 73% operating within 5 nm of the target wavelength. Furthermore, we also demonstrate thermo-optic tuning and trimming of the devices via cladding deposition, with the former bringing ~96% of tested devices to the target wavelength. Our technique enables the rapid growth of integrated quantum frequency converters, photon pair sources, and optical parametric amplifiers, thus facilitating the integration of TFLN-based nonlinear frequency mixers into more complex and functional photonic systems.

physics.app-ph↗

arXiv2023

Engineering Phonon-Qubit Interactions using Phononic Crystals

The ability to control phonons in solids is key for diverse quantum applications, ranging from quantum information processing to sensing. Often, phonons are sources of noise and decoherence, since they can interact with a variety of solid-state quantum systems. To mitigate this, quantum systems typically operate at milli-Kelvin temperatures to reduce the number of thermal phonons. Here we demonstrate an alternative approach that relies on engineering phononic density of states, drawing inspiration from photonic bandgap structures that have been used to control the spontaneous emission of quantum emitters. We design and fabricate diamond phononic crystals with a complete phononic bandgap spanning 50 - 70 gigahertz, tailored to suppress interactions of a single silicon-vacancy color center with resonant phonons of the thermal bath. At 4 Kelvin, we demonstrate a reduction of the phonon-induced orbital relaxation rate of the color center by a factor of 18 compared to bulk. Furthermore, we show that the phononic bandgap can efficiently suppress phonon-color center interactions up to 20 Kelvin. In addition to enabling operation of quantum memories at higher temperatures, the ability to engineer qubit-phonon interactions may enable new functionalities for quantum science and technology, where phonons are used as carriers of quantum information.

quant-ph↗

arXiv2023

Telecom networking with a diamond quantum memory

Practical quantum networks require interfacing quantum memories with existing channels and systems that operate in the telecom band. Here we demonstrate low-noise, bidirectional quantum frequency conversion that enables a solid-state quantum memory to directly interface with telecom-band systems. In particular, we demonstrate conversion of visible-band single photons emitted from a silicon-vacancy (SiV) center in diamond to the telecom O-band, maintaining low noise ($g^2(0)<0.1$) and high indistinguishability ($V=89\pm8\%$). We further demonstrate the utility of this system for quantum networking by converting telecom-band time-bin pulses, sent across a lossy and noisy 50 km deployed fiber link, to the visible band and mapping their quantum states onto a diamond quantum memory with fidelity $\mathcal{F}=87\pm 2.5 \% $. These results demonstrate the viability of SiV quantum memories integrated with telecom-band systems for scalable quantum networking applications.

quant-ph↗

arXiv2022

Spectrally separable photon-pair generation in dispersion engineered thin-film lithium niobate

Existing nonlinear-optic implementations of pure, unfiltered heralded single-photon sources do not offer the scalability required for densely integrated quantum networks. Additionally, lithium niobate has hitherto been unsuitable for such use due to its material dispersion. We engineer the dispersion and the quasi-phasematching conditions of a waveguide in the rapidly emerging thin-film lithium niobate platform to generate spectrally separable photon pairs in the telecommunications band. Such photon pairs can be used as spectrally pure heralded single-photon sources in quantum networks. We estimate a heralded-state spectral purity of ${>}94\%$ based on joint spectral intensity measurements. Further, a joint spectral phase-sensitive measurement of the unheralded time-integrated second-order correlation function yields a heralded-state purity of $(86 \pm 5)\%$.

physics.optics↗

arXiv2021

Spectral control of nonclassical light using an integrated thin-film lithium niobate modulator

Manipulating the frequency and bandwidth of nonclassical light is essential for implementing frequency-encoded/multiplexed quantum computation, communication, and networking protocols, and for bridging spectral mismatch among various quantum systems. However, quantum spectral control requires a strong nonlinearity mediated by light, microwave, or acoustics, which is challenging to realize with high efficiency, low noise, and on an integrated chip. Here, we demonstrate both frequency shifting and bandwidth compression of nonclassical light using an integrated thin-film lithium niobate (TFLN) phase modulator. We achieve record-high electro-optic frequency shearing of telecom single photons over terahertz range ($\pm$ 641 GHz or $\pm$ 5.2 nm), enabling high visibility quantum interference between frequency-nondegenerate photon pairs. We further operate the modulator as a time lens and demonstrate over eighteen-fold (6.55 nm to 0.35 nm) bandwidth compression of single photons. Our results showcase the viability and promise of on-chip quantum spectral control for scalable photonic quantum information processing.

physics.optics↗

arXiv2021

Integrated photonics on thin-film lithium niobate

Lithium niobate (LN), an outstanding and versatile material, has influenced our daily life for decades: from enabling high-speed optical communications that form the backbone of the Internet to realizing radio-frequency filtering used in our cell phones. This half-century-old material is currently embracing a revolution in thin-film LN integrated photonics. The success of manufacturing wafer-scale, high-quality, thin films of LN on insulator (LNOI), accompanied with breakthroughs in nanofabrication techniques, have made high-performance integrated nanophotonic components possible. With rapid development in the past few years, some of these thin-film LN devices, such as optical modulators and nonlinear wavelength converters, have already outperformed their legacy counterparts realized in bulk LN crystals. Furthermore, the nanophotonic integration enabled ultra-low-loss resonators in LN, which unlocked many novel applications such as optical frequency combs and quantum transducers. In this Review, we cover -- from basic principles to the state of the art -- the diverse aspects of integrated thin-film LN photonics, including the materials, basic passive components, and various active devices based on electro-optics, all-optical nonlinearities, and acousto-optics. We also identify challenges that this platform is currently facing and point out future opportunities. The field of integrated LNOI photonics is advancing rapidly and poised to make critical impacts on a broad range of applications in communication, signal processing, and quantum information.

physics.optics↗