arXiv subjects

C. Jablonski

Publications and source records attributed to C. Jablonski.

3 recordsLinked to original sources

arXiv2026

Design and Realization of the LST Main Structure for the Cherenkov Telescope Array

The 23 m diameter Large Size Cherenkov Telescope (LST) for CTA, located at 2250 m a.s.l. on the Canary Island of La Palma, is the next-generation Cherenkov telescope following MAGIC, H.E.S.S., and VERITAS. To enable rapid repositioning (180{\deg} in 18 s) for gamma-ray burst observations, the mechanical structure was designed to be ultra- lightweight (110 tons). The space-frame structure consists of slender struts made of carbon fibre, aluminium (dish and camera mast), and steel. The telescope is designed to withstand extreme environmental conditions at the ORM observatory on La Palma, including wind speeds up to 200 km/h, uplift forces, and ice loads of up to 30 tons. We present the structural design developed to meet these functional and environmental requirements. MPP Munich is responsible for the telescope's mechanical structure together with partner institutes in France (LAPP) and Spain (IFAE). The prototype, LST-1, has been operational since 2019, and three additional LSTs are curre1ntly under construction.

astro-ph.IM↗

arXiv2015

The Optical System for the Large Size Telescope of the Cherenkov Telescope Array

The Large Size Telescope (LST) of the Cherenkov Telescope Array (CTA) is designed to achieve a threshold energy of 20 GeV. The LST optics is composed of one parabolic primary mirror 23 m in diameter and 28 m focal length. The reflector dish is segmented in 198 hexagonal, 1.51 m flat to flat mirrors. The total effective reflective area, taking into account the shadow of the mechanical structure, is about 368 m$^2$. The mirrors have a sandwich structure consisting of a glass sheet of 2.7 mm thickness, aluminum honeycomb of 60 mm thickness, and another glass sheet on the rear, and have a total weight about 47 kg. The mirror surface is produced using a sputtering deposition technique to apply a 5-layer coating, and the mirrors reach a reflectivity of $\sim$94% at peak. The mirror facets are actively aligned during operations by an active mirror control system, using actuators, CMOS cameras and a reference laser. Each mirror facet carries a CMOS camera, which measures the position of the light spot of the optical axis reference laser on the target of the telescope camera. The two actuators and the universal joint of each mirror facet are respectively fixed to three neighboring joints of the dish space frame, via specially designed interface plate.

astro-ph.IM↗

arXiv2013

The Cherenkov Telescope Array Large Size Telescope

The two arrays of the Very High Energy gamma-ray observatory Cherenkov Telescope Array (CTA) will include four Large Size Telescopes (LSTs) each with a 23 m diameter dish and 28 m focal distance. These telescopes will enable CTA to achieve a low-energy threshold of 20 GeV, which is critical for important studies in astrophysics, astroparticle physics and cosmology. This work presents the key specifications and performance of the current LST design in the light of the CTA scientific objectives.

astro-ph.IM↗