arXiv subjects

C. Kulcsár

Publications and source records attributed to C. Kulcsár.

4 recordsLinked to original sources

arXiv2026

The MICADO first light imager for the ELT: first on-bench performance tests of the SCAO hybrid LQG+Integrator controller

The Extremely Large Telecope (ELT) is expected to begin scientific operations in 2030, with MICADO as its first-light imager. The Single Conjugate Adaptive Optics (SCAO) system for MICADO is currently being assembled and tested at the Observatoire de Paris. MICADO's baseline AO control strategy uses a hybrid approach: a Linear Quadratic Gaussian (LQG) regulator for low-order modes, optimised to adapt to the disturbance caused by vibrations and ELT windshake, and an integral action controller for higher-oder modes. Despite the non linearity of the Pyramid Wavefront Sensor (PyWFS), the so-called "optical gains", LQG control has proven to be highly effective in simulation. It has been shown that the LQG regulator is resilient to optical gain variations in the loop or to inaccuracies in their estimation. Increasing the number of modes controlled by the LQG regulator would therefore make the controller less sensitive to the optical gains, which are notoriously difficult to estimate during operation. A first hybrid controller, with only tip-tilt controlled with LQG control, has been validated using COMPASS, the end-to-end, GPU-accelerated, AO simulation platform. We will present the first experimental validation of this hybrid controller on the MICADO-SCAO bench. We will also present results obtained by increasing the number of modes controlled with LQG control and the work carried out to go towards an autonomous LQG regulator.

astro-ph.IM↗

arXiv2026

Non-common path aberration compensation and a dark hole loop with a pyramid adaptive optics system: Application to SAXO+

In ground-based high-contrast instruments, non-common path aberrations (NCPAs) limit detection performance, as they are unseen by the adaptive optics (AO) wavefront sensor but impact the astrophysical image, creating quasi-static speckles. SAXO+, the upgrade of the SAXO (SPHERE AO system) includes a second loop of AO downstream of the SAXO loop that is equipped with a near-infrared pyramid wavefront sensor whose nonlinearities, usually described with modal optical gains, might be challenging for removing quasi-static speckles. We investigated two methods of quasi-static speckle removal : NCPA compensation and a dark hole loop, behind a pyramid AO system, measuring the interest of compensating for the pyramid optical gains. We performed end-to-end numerical simulations under various astrophysical conditions. We offset the pyramid wavefront sensor operating point to apply both the speckle suppression methods, with or without optical gain calibration. We evaluated the performance by measuring the residual starlight in the coronagraph image. A by-product of our study is an on-sky calibration method of measuring the pyramid optical gains. NCPA compensation reduces the residual starlight in the coronagraph image by a factor of 20 for seeing between 0.7" and 1" for a bright star and a factor of 2 at 0.7" for a faint star. Optical gains compensation enhances the performance at poor seeing and small pyramid modulation radius with a bright star, but shows a useless or even negative impact due to estimation inaccuracies at faint targets. On the other hand, the dark hole loop reduces the residual starlight by a factor of 200. The optical gain calibration enhances the dark hole performance behind a single pyramid AO system but is useless behind the SAXO+ system. Our parametric study gives baseline values for the efficient control of the dark hole loop for the SAXO+ system.

astro-ph.IM↗

arXiv2024

The MICADO first light imager for the ELT: off-axis performance of PSF reconstruction

The highest scientific return, for adaptive optics (AO) observations, is achieved with a reliable reconstruction of the PSF. This is especially true for MICADO@ELT. In this presentation, we will focus on extending the MICADO PSF reconstruction (PSF-R) method to the off-axis case. Specifically, a novel approach based on temporal-based tomography of AO telemetry data has been recently implemented. Results from the PSF-R of both simulated and real data show that, at half isoplanatic angle distances, a precision of about 10-15% is achievable in both Strehl ratio and full-width at half maximum, paving the way to extend the MICADO PSF-R tool also to the multi-conjugated AO case.

astro-ph.IM↗

arXiv2022

Upgrading the high contrast imaging facility SPHERE: science drivers and instrument choices

SPHERE+ is a proposed upgrade of the SPHERE instrument at the VLT, which is intended to boost the current performances of detection and characterization for exoplanets and disks. SPHERE+ will also serve as a demonstrator for the future planet finder (PCS) of the European ELT. The main science drivers for SPHERE+ are 1/ to access the bulk of the young giant planet population down to the snow line ($3-10$ au), to bridge the gap with complementary techniques (radial velocity, astrometry); 2/ to observe fainter and redder targets in the youngest ($1-10$\,Myr) associations compared to those observed with SPHERE to directly study the formation of giant planets in their birth environment; 3/ to improve the level of characterization of exoplanetary atmospheres by increasing the spectral resolution in order to break degeneracies in giant planet atmosphere models. Achieving these objectives requires to increase the bandwidth of the xAO system (from $\sim$1 to 3\,kHz) as well as the sensitivity in the infrared (2 to 3\,mag). These features will be brought by a second stage AO system optimized in the infrared with a pyramid wavefront sensor. As a new science instrument, a medium resolution integral field spectrograph will provide a spectral resolution from 1000 to 5000 in the J and H bands. This paper gives an overview of the science drivers, requirements and key instrumental trade-off that were done for SPHERE+ to reach the final selected baseline concept.

astro-ph.IM↗