Searcharxiv⌕ Search

arXiv subjects

C. López-Cobá

Publications and source records attributed to C. López-Cobá.

9 recordsLinked to original sources

The GECKOS survey: Resolving the molecular and ionised gas in the galactic outflow of ESO~484-036

We present a spatially resolved, multiphase study of the outflow in the edge-on starburst galaxy ESO~484-036 from the GECKOS survey, combining VLT/MUSE H$α$ and ALMA CO(1$-$0) observations to analyse the atomic ionised and cold molecular gas. Both show extraplanar emission consistent with a conical outflow. Ionised gas is enclosed by molecular gas, which is detected up to 2.5 kpc from the disc. Molecular gas dominates near the disc, except at the nuclear base, while ionised gas extends beyond 3 kpc. The deprojected outflow velocities are $\lesssim400\ \rm km\ s^{-1}$ in both phases and are consistent with ballistic motion, with some gas possibly falling back onto the disc. We find that the mass outflow rates are in the range of $\dot M_{\rm ion}\sim1-5\ \rm M_\odot\ \rm yr^{-1}$ and $\dot M_{\rm mol}\sim13-54\ \rm M_\odot\ \rm yr^{-1}$, giving mass loading factors of $η_{M\rm, ion}\sim 0.1-0.6$ and $η_{M\rm, mol}\sim 1.5-6.2$. These ranges reflect velocity and geometric uncertainties. Despite the short depletion time ($τ_{\rm dep} = 16-48\rm\ Myr$), the outflow may regulate rather than permanently quench the gas reservoir. Energy loading ($η_E\leq0.16$) and momentum loading ($η_p\lesssim1$) support a purely starburst-driven outflow. Comparing ESO~484-036 with a literature sample, we find a systematic 1~dex shift in mass-loading relations when molecular gas is included. This produces a $\sim3.5$~dex discrepancy with cosmological simulations in $η_{M\rm, mol}/η_{M\rm, ion}$, implying that current models strongly underpredict cold gas production and the role of short-range recycling flows in starburst galaxies.

astro-ph.GA↗

HII regions and diffuse ionized gas in the AMUSING++ Compilation: I. Catalogue presentation

We present a catalog of $\sim$52,000 extragalactic HII regions and their spectroscopic properties obtained using Integral Field Spectroscopy (IFS) from MUSE observations. The sample analyzed in this study contains 678 galaxies within the nearby Universe (0.004 < z < 0.06) covering different morphological types and a wide range of stellar masses (6 < log(M$_{*}$/M$_{\odot}$) < 13). Each galaxy was analyzed using the Pipe3D and pyHIIextractor codes to obtain information of the ionized gas and underlying stellar populations. Specifically, the fluxes, equivalent widths, velocities and velocity dispersions of 30 emission lines covering the wavelength range between $λ$4750A to $λ$9300A, were extracted and were used to estimate luminosity weighted ages and metallicities of the underlying stellar populations from each HII region (of the original sample we detect HII regions in 539 galaxies). In addition, we introduce and apply a novel method and independent of any intrinsic physical property to estimate and decontaminate the contribution of the diffuse ionized gas. Using the final catalog, we explore the dependence of properties of the HII regions on different local and global galaxy parameters: (i) Hubble type, (ii) stellar mass, (iii) galactocentric distance, and (iv) the age and metallicity of the underlying/neighbour stellar populations. We confirm known relations between properties of the HII regions and the underlying stellar populations (in particular with the age) uncovered using data of lower spatial and spectral resolution. Furthermore, we describe the existence of two main families of diffuse ionized gas different for galaxies host or not of HII region

astro-ph.GA↗

SDSS-IV MaNGA: The radial distribution of physical properties within galaxies in the nearby universe

Using the largest sample of galaxies observed with an optical integral field unit (IFU, the SDSS-IV MaNGA survey, $\sim$10000 targets), we derive the radial distribution of the physical properties obtained from the stellar continuum and the ionized-gas emission lines. Given the large sample, we are able to explore the impact of the total stellar mass and morphology by averaging those radial distributions for different bins of both global properties. We use a piece-wise analysis to characterize the slopes of the gradients from those properties at different galactocentric distances. In general we find that most of the properties -- derived from both the stellar continuum and the ionized gas emission lines -- exhibit a negative gradient with a secondary impact by global properties such as the total stellar mass or morphology. Our results confirm the intimate interplay between the properties of the stellar component and those of the ionized gas at local (kpc) scales in order to set the observed gradients. Furthermore, the resemblance of the gradients for similar global properties (in particular for the stellar parameters) indicates statistical similar histories of star formation and chemical enrichment with an initial radial gas distribution following the potential of the galaxy.

astro-ph.GA↗

pyHIIextractor: A tool to detect and extract physical properties of HII regions from Integral Field Spectroscopic data

We present a new code named pyHIIextractor, which detects and extracts the main features (positions and radii) of clumpy ionized regions, i.e. candidate HII regions, using Hα emission line images. Our code is optimized to be used on the dataproducts provided by the Pipe3D pipeline (or dataproducts with such a format), applied to high spatial resolution Integral Field Spectroscopy data (like that provided by the AMUSING++ compilation, using MUSE). The code provides the properties of both the underlying stellar population and the emission lines for each detected H ii candidate. Furthermore, the code delivers a novel estimation of the diffuse ionized gas (DIG) component, independent of its physical properties, which enables a decontamination of the properties of the HII regions from the DIG. Using simulated data, mimicking the expected observations of spiral galaxies, we characterise pyHIIextractor and its ability to extract the main properties of the H ii regions (and the DIG), including the line fluxes, ratios and equivalent widths. Finally, we compare our code with other such tools adopted in the literature, which have been developed or used for similar purposes: pyhIIexplorer, SourceExtractor, HIIphot, and astrodendro. We conclude that pyHIIextractor exceeds the performance of previous tools in aspects such as the number of recovered regions and the distribution of sizes and fluxes (an improvement that is especially noticeable for the faintest and smallest regions). pyHIIextractor is therefore an optimals tool to detect candidate HII regions, offering an accurate estimation of their properties and a good decontamination of the DIG component.

astro-ph.GA↗

The Mass-Metallicity Relation revisited with CALIFA

We present an updated version of the mass--metallicity relation (MZR) using integral field spectroscopy data obtained from 734 galaxies observed by the CALIFA survey. These unparalleled spatially resolved spectroscopic data allow us to determine the metallicity at the same physical scale ($\mathrm{R_{e}}$) for different calibrators. We obtain MZ relations with similar shapes for all calibrators, once the scale factors among them are taken into account. We do not find any significant secondary relation of the MZR with either the star formation rate (SFR) or the specific SFR for any of the calibrators used in this study, based on the analysis of the residuals of the best fitted relation. However we do see a hint for a (s)SFR-dependent deviation of the MZ-relation at low masses (M$<$10$^{9.5}$M$_\odot$), where our sample is not complete. We are thus unable to confirm the results by Mannucci et al. (2010), although we cannot exclude that this result is due to the differences in the analysed datasets. In contrast, our results are inconsistent with the results by Lara-Lopez et al. (2010), and we can exclude the presence of a SFR-Mass-Oxygen abundance Fundamental Plane. These results agree with previous findings suggesting that either (1) the secondary relation with the SFR could be induced by an aperture effect in single fiber/aperture spectroscopic surveys, (2) it could be related to a local effect confined to the central regions of galaxies, or (3) it is just restricted to the low-mass regime, or a combination of the three effects.

astro-ph.GA↗

Star formation driven galactic winds in UGC 10043

We study the galactic wind in the edge-on spiral galaxy UGC 10043 with the combination of the CALIFA integral field spectroscopy data, scanning Fabry-Perot interferometry (FPI), and multiband photometry. We detect ionized gas in the extraplanar regions reaching a relatively high distance, up to ~ 4 kpc above the galactic disk. The ionized gas line ratios ([N ii]/Ha, [S ii]/Ha and [O i]/Ha) present an enhancement along the semi minor axis, in contrast with the values found at the disk, where they are compatible with ionization due to H ii-regions. These differences, together with the biconic symmetry of the extra-planar ionized structure, makes UGC 10043 a clear candidate for a galaxy with gas outflows ionizated by shocks. From the comparison of shock models with the observed line ratios, and the kinematics observed from the FPI data, we constrain the physical properties of the observed outflow. The data are compatible with a velocity increase of the gas along the extraplanar distances up to < 400 km/s and the preshock density decreasing in the same direction. We also observe a discrepancy in the SFR estimated based on Ha (0.36 Msun/yr ) and the estimated with the CIGALE code, being the latter 5 times larger. Nevertheless, this SFR is still not enough to drive the observed galactic wind if we do not take into account the filling factor. We stress that the combination of the three techniques of observation with models is a powerful tool to explore galactic winds in the Local Universe.

astro-ph.GA↗

Spatially-Resolved Star Formation Main Sequence of Galaxies in the CALIFA Survey

The "main sequence of galaxies" $-$ defined in terms of the total star formation rate $ψ$ vs. the total stellar mass $M_*$ $-$ is a well-studied tight relation that has been observed at several wavelengths and at different redshifts. All earlier studies have derived this relation from integrated properties of galaxies. We recover the same relation from an analysis of spatially-resolved properties, with integral field spectroscopic (IFS) observations of 306 galaxies from the CALIFA survey. We consider the SFR surface density in units of log(M$_{\odot}$ yr$^{-1}$ Kpc$^{-2}$) and the stellar mass surface density in units of log(M$_{\odot}$ Kpc$^{-2}$) in individual spaxels which probe spatial scales of 0.5-1.5 Kpc. This local relation exhibits a high degree of correlation with small scatter ($σ= 0.23$ dex), irrespective of the dominant ionisation source of the host galaxy or its integrated stellar mass. We highlight: $(i)$ the integrated star formation main sequence formed by galaxies whose dominant ionisation process is related to star formation, for which we find a slope of 0.81 $\pm 0.02$; (ii) the spatially-resolved relation obtained with the spaxel analysis, we find a slope of 0.72 $\pm 0.04$; (iii) for the integrated main sequence we identified also a sequence formed by galaxies that are dominated by an old stellar population, which we have called the retired galaxies sequence.

astro-ph.GA↗

Pipe3D, a pipeline to analyse integral field spectroscopy data: II. Analysis sequence and CALIFA dataproducts

We present Pipe3D, an analysis pipeline based on the FIT3D fitting tool, devel- oped to explore the properties of the stellar populations and ionized gas of Integral Field Spectroscopy data. Pipe3D was created to provide with coherent, simple to distribute, and comparable dataproducts, independently of the origin of the data, focused on the data of the most recent IFU surveys (e.g., CALIFA, MaNGA, and SAMI), and the last generation IFS instruments (e.g., MUSE). Along this article we describe the different steps involved in the analysis of the data, illustrating them by showing the dataproducts derived for NGC 2916, observed by CALIFA and P-MaNGA. As a practical use of the pipeline we present the complete set of dataproducts derived for the 200 datacubes that comprises the V500 setup of the CALIFA Data Release 2 (DR2), making them freely available through the network (ftp://ftp.caha.es/CALIFA/dataproducts/DR2/Pipe3D). Finally, we explore the hypothesis that the properties of the stellar populations and ionized gas of galaxies at the effective radius are representative of the overall average ones, finding that this is indeed the case.

astro-ph.IM↗

Pipe3D, a pipeline to analyze Integral Field Spectroscopy data: I. New fitting phylosophy of FIT3D

We present an improved version of FIT3D, a fitting tool for the analysis of the spectroscopic properties of the stellar populations and the ionized gas derived from moderate resolution spectra of galaxies. FIT3D is a tool developed to analyze Integral Field Spectroscopy data and it is the basis of Pipe3D, a pipeline already used in the analysis of datasets like CALIFA, MaNGA, and SAMI. We describe the philosophy behind the fitting procedure, and in detail each of the different steps in the analysis. We present an extensive set of simulations in order to estimate the precision and accuracy of the derived parameters for the stellar populations. In summary, we find that using different stellar population templates we reproduce the mean properties of the stellar population (age, metallicity, and dust attenuation) within ~0.1 dex. A similar approach is adopted for the ionized gas, where a set of simulated emission- line systems was created. Finally, we compare the results of the analysis using FIT3D with those provided by other widely used packages for the analysis of the stellar population (Starlight, Steckmap, and analysis based on stellar indices) using real high S/N data. In general we find that the parameters for the stellar populations derived by FIT3D are fully compatible with those derived using these other tools.

astro-ph.IM↗