arXiv subjects

C. M. Marques

Publications and source records attributed to C. M. Marques.

13 recordsLinked to original sources

arXiv2014

Can adding oil control domain formation in binary amphiphile bilayers?

Bilayers formed of two species of amphiphile of different chain lengths may segregate into thinner and thicker domains composed predominantly of the respective species. Using a coarse-grained mean-field model, we investigate how mixing oil with the amphiphiles affects the structure and thickness of the bilayer at and on either side of the boundary between two neighbouring domains. In particular, we find that oil molecules whose chain length is close to that of the shorter amphiphiles segregate to the thicker domain. This smooths the surface of the hydrophobic bilayer core on this side of the boundary, reducing its area and curvature and their associated free-energy penalties. The smoothing effect is weaker for oil molecules that are shorter or longer than this optimum value: short molecules spread evenly through the bilayer, while long molecules swell the thicker domain, increasing the surface area and curvature of the bilayer core in the interfacial region. Our results show that adding an appropriate oil could make the formation of domain boundaries more or less favourable, raising the possibility of controlling the domain size distribution.

cond-mat.soft↗

arXiv2013

Can amphiphile architecture directly control vesicle size?

Bilayer membranes self-assembled from simple amphiphiles in solution always have a planar ground-state shape. This is a consequence of several internal relaxation mechanisms of the membrane and prevents the straightforward control of vesicle size. Here, we show that this principle can be circumvented and that direct size control by molecular design is a realistic possibility. Using coarse-grained calculations, we design tetrablock copolymers that form membranes with a preferred curvature, and demonstrate how to form low-polydispersity vesicles while suppressing micellization.

cond-mat.soft↗

arXiv2011

Hydrophobic droplets in amphiphilic bilayers: a coarse-grained mean-field theory study

Hydrophobic molecules such as oils and certain drugs can be encapsulated between the two leaflets of an amphiphilic bilayer in both lipid and polymer systems. We investigate the case where the hydrophobic molecules are incompatible with the amphiphile tails and so form droplets. Using a coarse-grained mean-field model (self-consistent field theory, or SCFT), we find that droplets of a wide range of sizes have the same characteristic lens shape, and explain this result in terms of simple capillarity arguments, consistent with the measured variations of surface concentrations of amphiphile in the bilayer and in the monolayers that cover the droplet. We study the effect of the strength chi_BO of the repulsion between the hydrophobic liquid and the amphiphile tails on the droplet shape, and find a gradual flattening of the droplet as chi_BO is reduced. The droplet remains at least metastable even at very low values of chi_BO. This is in contrast to the behavior as the length of the hydrophobic molecules is varied. Specifically, if these molecules are at least as long as the amphiphile tails, increasing their length further is found to have little effect on the droplet shape, while reducing their length below this value quickly causes the droplet to become unstable.

cond-mat.soft↗

arXiv2010

Abrasion of flat rotating shapes

We report on the erosion of flat linoleum "pebbles" under steady rotation in a slurry of abrasive grit. To quantify shape as a function of time, we develop a general method in which the pebble is photographed from multiple angles with respect to the grid of pixels in a digital camera. This reduces digitization noise, and allows the local curvature of the contour to be computed with a controllable degree of uncertainty. Several shape descriptors are then employed to follow the evolution of different initial shapes toward a circle, where abrasion halts. The results are in good quantitative agreement with a simple model, where we propose that points along the contour move radially inward in proportion to the product of the radius and the derivative of radius with respect to angle.

cond-mat.soft↗

arXiv2010

Enhanced shear separation for chiral magnetic colloidal aggregates

We study the designing principles of the simplest colloidal propeller, an architecture built from four identical spheres that can couple translation with rotation to produce controlled drift motion. By considering superparamagnetic beads, we show that the simultaneous action of a magnetic field and a shear flow leads to the migration of the cluster in the vorticity direction. We investigate the dependence of the migration velocity on the geometrical parameters of the cluster, and find that significant cluster separation can be achieved under the typical operation conditions of microfluidic devices.

cond-mat.soft↗

arXiv2006

The shape and erosion of pebbles

The shapes of flat pebbles may be characterized in terms of the statistical distribution of curvatures measured along their contours. We illustrate this new method for clay pebbles eroded in a controlled laboratory apparatus, and also for naturally-occurring rip-up clasts formed and eroded in the Mont St.-Michel bay. We find that the curvature distribution allows finer discrimination than traditional measures of aspect ratios. Furthermore, it connects to the microscopic action of erosion processes that are typically faster at protruding regions of high curvature. We discuss in detail how the curvature may be reliable deduced from digital photographs.

cond-mat.soft↗

arXiv2006

What is in a pebble shape?

We propose to characterize the shapes of flat pebbles in terms of the statistical distribution of curvatures measured along the pebble contour. This is demonstrated for the erosion of clay pebbles in a controlled laboratory apparatus. Photographs at various stages of erosion are analyzed, and compared with two models. We find that the curvature distribution complements the usual measurement of aspect ratio, and connects naturally to erosion processes that are typically faster at protruding regions of high curvature.

cond-mat.soft↗

arXiv2003

Compression modulus of macroscopic fiber bundles

We study dense, disordered stacks of elastic macroscopic fibers. These stacks often exhibit non-linear elasticity, due to the coupling between the applied stress and the internal distribution of fiber contacts. We propose a theoretical model for the compression modulus of such systems, and illustrate our method by studying the conical shapes frequently observed at the extremities of ropes and other fiber structures. studying the conical shapes frequently observed at theextremities of ropes and other fiber structures.

cond-mat.stat-mech↗

arXiv2000

Local entropic effects of polymers grafted to soft interfaces

In this paper, we study the equilibrium properties of polymer chains end-tethered to a fluid membrane. The loss of conformational entropy of the polymer results in an inhomogeneous pressure field that we calculate for gaussian chains. We estimate the effects of excluded volume through a relation between pressure and concentration. Under the polymer pressure, a soft surface will deform. We calculate the deformation profile for a fluid membrane and show that close to the grafting point, this profile assumes a cone-like shape, independently of the boundary conditions. Interactions between different polymers are also mediated by the membrane deformation. This pair-additive potential is attractive for chains grafted on the same side of the membrane and repulsive otherwise.

cond-mat.soft↗

arXiv1997

Depletion forces between two spheres in a rod solution

We study the depletion interaction between spherical particles of radius R immersed in a dilute solution of rigid rods of length L. The computed interaction potential is, within numerical accuracy, exact for any value of L/R. In particular we find that for L of order R, the depth of the depletion well is smaller than the prediction of the Derjaguin approximation. Our results bring new light into the discussion on the lack of phase separation in colloidal mixtures of spheres and rods.

cond-mat.soft↗

arXiv1997

Rods Near Curved Surfaces and in Curved Boxes

We consider an ideal gas of infinitely rigid rods near a perfectly repulsive wall, and show that the interfacial tension of a surface with rods on one side is lower when the surface bends towards the rods. Surprisingly we find that rods on both sides of surfaces also lower the energy when the surface bends. We compute the partition functions of rods confined to spherical and cylindrical open shells, and conclude that spherical shells repel rods, whereas cylindrical shells (for thickness of the shell on the order of the rod-length) attract them. The role of flexibility is investigated by considering chains composed of two rigid segments.

cond-mat.soft↗

arXiv1997

Scattering from Solutions of Star Polymers

We calculate the scattering intensity of dilute and semi-dilute solutions of star polymers. The star conformation is described by a model introduced by Daoud and Cotton. In this model, a single star is regarded as a spherical region of a semi-dilute polymer solution with a local, position dependent screening length. For high enough concentrations, the outer sections of the arms overlap and build a semi-dilute solution (a sea of blobs) where the inner parts of the actual stars are embedded. The scattering function is evaluated following a method introduced by Auvray and de Gennes. In the dilute regime there are three regions in the scattering function: the Guinier region (low wave vectors, q R << 1) from where the radius of the star can be extracted; the intermediate region (1 << q R << f^(2/5)) that carries the signature of the form factor of a star with f arms: I(q) ~ q^(-10/3); and a high wavevector zone (q R >> f^(2/5)) where the local swollen structure of the polymers gives rise to the usual q^(-5/3) decay. In the semi-dilute regime the different stars interact strongly, and the scattered intensity acquires two new features: a liquid peak that develops at a reciprocal position corresponding to the star-star distances; and a new large wavevector contribution of the form q^(-5/3) originating from the sea of blobs.

cond-mat.soft↗

arXiv1996

Membranes in rod solutions: a system with spontaneously broken symmetry

We consider a dilute solution of infinitely rigid rods near a curved, perfectly repulsive surface and study the contribution of the rod depletion layer to the bending elastic constants of membranes. We find that a spontaneous curvature state can be induced by exposure of BOTH sides of the membrane to a rod solution. A similar result applies for rigid disks with a diameter equal to the rod's length. We also study the confinement of rods in spherical and cylindrical repulsive shells. This helps elucidate a recent discussion on curvature effects in confined quantum mechanical and polymer systems.

cond-mat.mtrl-sci↗