arXiv subjects

C. M. Mollo

Publications and source records attributed to C. M. Mollo.

6 recordsLinked to original sources

arXiv2023

A scanning device for spatial quantum efficiency measurements of photomultipliers tubes

This paper presents a quantum efficiency measurement setup based on a 2D motorized stage, a wide spectrum xenon lamp, a beam splitter system, and two calibrated photo-diodes for measuring the quantum efficiency (QE) of photomultiplier tubes (1 to 10 inches). We will demonstrate the effectiveness of technical refinements on the measurements procedures over some existing setups already shown in literature. The large area covered by the 2D stages permit to study the quantum efficiency of PMTs with diameter up to ten inches. The results obtained will show the high precision and accuracy in characterizing the quantum efficiency versus wavelength over the range of 250 nm to 1100 nm and along the photo-catode surface. The setup monitors the light intensity synchronously with the output current yield from photosensors under test. This ensures the accuracy and repeatability of the measurements. The motorized stage allows precise positioning of the light source with respect to the active area. The emission spectrum of the xenon lamp provides a broad range of illumination in terms of dynamics and wavelength span.

quant-ph↗

arXiv2017

Full Characterization of the First 1 Inch Industrial Prototype of a New Concept Photodetector

The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an original design for an innovative light detector we proposed with the aim to create new scientific instrumentation for industrial applications and physics research. The idea behind this device is to replace the classical dynode chain of a photomultiplier tube with a silicon photomultiplier, the latter acting as an electron detector and amplifier. The VSiPMT offers very attractive features and unprecedented performance, definitely superior to every other photodetector with comparable sensitive surface, such as: negligible power cosumption, excellent photon counting, easy low-voltage-based stabilization and very good time performance. After the feasibility test of the idea, Hamamatsu Photonics realized for our research group two VSiPMT industrial prototypes, that have been fully characterized. The results of the full characterization of the 1-inch industrial prototype are presented in this work.

physics.ins-det↗

arXiv2016

A new instrument for high statistics measurement of photomultiplier characteristics

Since the early days of experimental particle physics photomultipliers (PMTs) have played an important role in the detector design. Thanks to their capability of fast photon counting, PMTs are extensively used in the new-generation of astroparticle physics experiments, such as air, ice and water Cherenkov detectors. Small size PMTs ($\leq $ 3 inches diameter) show little sensitivity to the Earth magnetic field, small transit time, stable transit time spread; the price per photocathode area is less comparing to the one for the large area PMTs, typically used so far in such applications. Together with developments and reduced price of multichannel electronics, the use of PMTs of 3-inches or smaller diameter is a promising option even for nowadays large volume detectors. In this paper we report on the design and performance of a new instrument for mass characterisation of PMTs (from 1 inch to 3 inches size), capable to calibrate hundreds of PMTs per day and provide measurements of dark counts, signal amplitude, late-, delayed-, pre- and after-pulses, transit time and transit time spread.

physics.ins-det↗

arXiv2016

Long term monitoring of the optical background in the Capo Passero deep-sea site with the NEMO tower prototype

The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italian node of the KM3NeT neutrino telescope will be built. The installation and operation of the NEMO Phase-2 tower has proven the functionality of the infrastructure and the operability at 3500 m depth. A more than one year long monitoring of the deep water characteristics of the site has been also provided. In this paper the infrastructure and the tower structure and instrumentation are described. The results of long term optical background measurements are presented. The rates show stable and low baseline values, compatible with the contribution of 40K light emission, with a small percentage of light bursts due to bioluminescence. All these features confirm the stability and good optical properties of the site.

physics.ins-det↗

arXiv2014

Measurement of the atmospheric muon depth intensity relation with the NEMO Phase-2 tower

The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the systematic effects due to uncertainties on environmental and detector parameters is also included. The associated depth intensity relation was evaluated and compared with previous measurements and theoretical predictions. With the present analysis, the muon depth intensity relation has been measured up to 13 km of water equivalent.

physics.ins-det↗

arXiv2014

A new generation photodetector for astroparticle physics: the VSiPMT

The VSiPMT (Vacuum Silicon PhotoMultiplier Tube) is an innovative design we proposed for a revolutionary photon detector. The main idea is to replace the classical dynode chain of a PMT with a SiPM (G-APD), the latter acting as an electron detector and amplifier. The aim is to match the large sensitive area of a photocathode with the performance of the SiPM technology. The VSiPMT has many attractive features. In particular, a low power consumption and an excellent photon counting capability. To prove the feasibility of the idea we first tested the performance of a special non-windowed SiPM by Hamamatsu (MPPC) as electron detector and current amplifier. Thanks to this result Hamamatsu realized two VSiPMT industrial prototypes. In this work, we present the results of a full characterization of the VSiPMT prototype.

physics.ins-det↗