Searcharxiv⌕ Search

arXiv subjects

C. Olave

Publications and source records attributed to C. Olave.

8 recordsLinked to original sources

Euclid Data Release 1 (DR1). AstroVink-TREX: Automated strong gravitational lens segmentation as input for mass modelling pipelines

Strong gravitational lens modelling requires the lens light, lensed source light, and contaminants to be separated in each image before mass modelling codes can fit the system. Within Euclid this separation has so far been done by hand, which does not scale to the more than 15,000 candidates in the Euclid Lens Identification Pipeline and Scientific Exploration (ECLIPSE) catalogue of Data Release 1 (DR1). We present AstroVink-TREX , a neural network that performs this separation automatically and predicts three flux maps, in a standard format directly usable by mass-modelling pipelines. The network uses a hybrid architecture, pairing a vision transformer encoder reused from the lens detection network with a parallel convolutional branch. A custom loss function penalises both flux and structural error, while allowing independent weighting per component. From the network's predictions we also derive the modelling centre, fitting region, conjugate points, and binary maps, providing all the inputs that a modelling pipeline needs to run without manual setup. We evaluate the efficiency of the network on DR1 systems against existing fits and through expert validation. Across approximately 3000 inspected systems, taking 75% agreement between inspectors, just 39 lens models fail because of a segmentation error. Following this validation, the network provides the component separation and modelling setup for every system modelled in DR1. With automated segmentation, lens modelling is no longer limited by manual preprocessing and can now operate at the same scale as lens discovery.

astro-ph.IM↗

Euclid Data Release 1 (DR1). Euclid Lens Identification Pipeline and Scientific Exploration (ECLIPSE) A: Strong lens catalogue overview

We present 15 072 high-confidence strong lens candidates in Euclid Data Release 1 (DR1), spanning 2000 deg$^2$. These comprise 6073 grade A ('sure lens') and 8999 grade B ('probable lens') systems, which we publish alongside a further 9010 grade C ('possible lens') candidates. With more high-confidence candidates than all previous catalogues combined, this sample establishes a large, homogeneous data set of galaxy-scale strong lenses with high-resolution imaging, transforming strong lensing from a field of rare discoveries to a robust statistical tool for astrophysics and cosmology. Of the roughly 900 million sources in DR1, we searched the 68 million passing our catalogue selection using a bespoke discovery pipeline that synthesises scores from five machine-learning models with visual classifications from around 7000 citizen scientists and 67 strong lensing experts. Beyond classical Einstein rings, our catalogue includes 84 candidate double-source-plane lenses and over 1000 candidate disc lenses, two exotic classes with few previously known examples, as well as several hundred candidate lensed AGN and quasars. We deliver automated lens models for the combined grade A+B systems, and photometric redshifts and stellar population properties for the deflector galaxies, providing immediate science-ready data products. We find that the majority of the deflector galaxies are massive and quiescent, with stellar masses of $\log_{10}(M_\ast /M_\odot) = 11.39^{+0.29}_{-0.33}$ (Salpeter initial mass function; 16th-84th percentile range). The deflector galaxies span a range of photometric redshifts ($z=0.68 ^{+0.33}_{-0.29}$), extending to higher redshifts than previous ground-based lens samples, and the lenses have a typical Einstein radius of $0.85 ^{+0.44}_{-0.24}$ arcsec. Extrapolating by area, we expect over 100 000 high-confidence strong lens candidates in the Euclid Wide Survey.

astro-ph.GA↗

Euclid Data Release 1 (DR1). Euclid Lens Identification Pipeline and Scientific Exploration (ECLIPSE) B: Discovery pipeline overview

We present the method used to identify the $15\,000$ high-grade galaxy-galaxy strong lens candidates in Euclid Data Release 1 (DR1). Given that lenses are intrinsically rare systems and the DR1 data set is vast, this lens search was conducted in a number of stages: a catalogue-level cut; a machine-learning and ensemble search; a two-stage citizen-science search, and finally grading of lens candidates by strong lens researchers. In this paper, we describe each search stage and their respective results. This search was enabled by the automated classification of over 68 million objects by neural networks, more than 4.5 million classifications of $300\,000$ objects by citizen-scientist volunteers, and the inspection of over $30\,000$ objects by strong lens researchers. We find this multi-stage approach helps maximise the number of lenses identified, while minimising inspection requirements of both citizen scientists and strong lens researchers. We measure a completeness in our comprehensive search of $0.73_{-0.15}^{+0.08}$ to grade A ('definite') systems and $0.34_{-0.06}^{+0.05}$ to grade A+B ('definite' + 'probable') systems. Our search therefore identifies the majority of the definitive strong lens systems in the DR1 area with the remainder likely to be fainter or more ambiguous cases. We find that researcher grading remains subjective; in this work we implement calibration to account for biases of individual inspectors and highlight the benefit of lens modelling (ECLIPSE-C) in determining the nature of a lens candidate. This paper forms part of the ECLIPSE series, here focussing on the discovery pipeline used to identify lens candidates in Euclid DR1; an overview of the lenses discovered is presented in ECLIPSE-A.

astro-ph.GA↗

Euclid Data Release 1 (DR1). Euclid Lens Identification Pipeline and Scientific Exploration (ECLIPSE) C: Lens modelling pipeline overview

Galaxy-scale strong lenses provide precise measurements of galaxy mass distributions, magnified views of distant galaxies, and a competitive cosmological probe. Historically, such studies have been limited to hundreds of lenses, with automated modelling methods proving difficult to scale. We present automated lens modelling of 15 072 strong-lens candidates from Euclid Data Release 1 (DR1), over an order of magnitude larger than any previously modelled sample. Using PyAutoLens-JAX, we perform three fits with multi-Gaussian expansion (MGE), pixelised, and Sérsic representations of the source, adopting an isothermal ellipsoid mass model with external shear. These fits provide foreground lens-light subtraction, adaptive Delaunay source reconstructions, and deblended photometry. More than 20 expert inspectors visually assess the resulting models, and each model is assigned the classification on which at least 75% of its inspectors agree. Of the 6073 grade A (secure) lens candidates, inspectors classify 4098 (67.5%) as successfully modelled, 580 (9.6%) as failures, 317 (5.2%) as multi-galaxy lenses, 15 (0.2%) as double-source-plane lenses, and 7 (0.1%) as unsure if lens, while 1032 (17.0%) reach no consensus and 24 (0.4%) have incomplete models. For the 8999 grade B (probable) candidates, the modelling success rate falls to 43.1%, primarily reflecting an increase in cases without consensus (37.6%), rather than a comparable increase in agreed failures (12.9%). Successfully modelled grade A and B systems have a median effective Einstein radius of 0.85 arcsec and a median total $I_E$-band source magnification of 8.1. We publicly release the successful lens models, their inferred properties, and magnified-source reconstructions through the ECLIPSE catalogue, demonstrating automated modelling at Euclid sample sizes and enabling population-level strong-lensing science.

astro-ph.GA↗

Euclid Quick Data Release (Q1). The first catalogue of strong-lensing galaxy clusters

We present the first catalogue of strong lensing galaxy clusters identified in the Euclid Quick Release 1 observations (covering $63.1\,\mathrm{deg^2}$). This catalogue is the result of the visual inspection of 1260 cluster fields. Each galaxy cluster was ranked with a probability, $\mathcal{P}_{\mathrm{lens}}$, based on the number and plausibility of the identified strong lensing features. Specifically, we identified 83 gravitational lenses with $\mathcal{P}_{\mathrm{lens}}>0.5$, of which 14 have $\mathcal{P}_{\mathrm{lens}}=1$, and clearly exhibiting secure strong lensing features, such as giant tangential and radial arcs, and multiple images. Considering the measured number density of lensing galaxy clusters, approximately $0.3\,\mathrm{deg}^{-2}$ for $\mathcal{P}_{\mathrm{lens}}>0.9$, we predict that \Euclid\ will likely see more than 4500 strong lensing clusters over the course of the mission. Notably, only three of the identified cluster-scale lenses had been previously observed from space. Thus, \Euclid has provided the first high-resolution imaging for the remaining $80$ galaxy cluster lenses, including those with the highest probability. The identified strong lensing features will be used for training deep-learning models for identifying gravitational arcs and multiple images automatically in \Euclid observations. This study confirms the huge potential of \Euclid for finding new strong lensing clusters, enabling exciting new discoveries on the nature of dark matter and dark energy and the study of the high-redshift Universe.

astro-ph.CO↗

Formation of massive black holes via collisions and accretion

To explain the observed population of supermassive black holes at z~7, very massive seed black holes or, alternatively, super-Eddington scenarios are needed to reach final masses of the order of 10^9 solar masses. A popular explanation for massive seeds has been the direct collapse model, which predicts the formation of a single massive object due to the direct collapse of a massive gas cloud. Simulations over the last years have however shown that such a scenario is very difficult to achieve. A realistic model of black hole formation should therefore take fragmentation into account, and consider the interaction between stellar-dynamical and gas-dynamical processes. We present here numerical simulations pursued with the AMUSE code, employing an approximate treatment of the gas. Based on these simulations, we show that very massive black holes of 10^4-10^5 solar masses may form depending on the gas supply and the accretion onto the protostars.

astro-ph.GA↗

Impact of radiation backgrounds on the formation of massive black holes

The presence of supermassive black holes (SMBHs) of a few billion solar masses at very high redshift has motivated us to study how these massive objects formed during the first billion years after the Big Bang. The most promising model that has been proposed to explain this is the direct collapse of protogalactic gas clouds. In this scenario, very high accretion rates are needed to form massive objects early on and the suppression of $\mathrm H_2$ cooling is important in regulating the fragmentation. Recent studies have shown that if we use a strong radiation background, the hydrogen molecules are destroyed, favoring the high accretion rates and therefore producing objects of very high mass. In this work we study the impact of UV radiation fields in a primordial gas cloud using the recently coupled code GRADSPH-KROME for the modeling of gravitational collapse including primordial chemistry to explore the fragmentation in AU scales and hence the formation of first SMBHs. We found that to suppress the formation of $\mathrm H_2$ a very high value of $J_{21}$ is required, because of that we conclude that the direct collapse black holes (DCBHs) are very unlikely to be an explanation for the formation of the first SMBHs.

astro-ph.GA↗

Star formation at high redshift

We present here a three-dimesional hydrodynamical simulation for star formation. Our aim is to explore the effect of the metal-line cooling on the thermodynamics of the star-formation process. We explore the effect of changing the metallicty of the gas from $Z/Z_{\odot}=10^{-4}$ to $Z/Z_{\odot}=10^{-2}$. Furthermore, we explore the implications of using the observational abundance pattern of a CEMP-no star, which have been considered to be the missing second-generation stars, the so-called Pop. III.2 stars. In order to pursue our aim, we modelled the microphysics by employing the public astrochemistry package KROME, using a chemical network which includes sixteen chemical species (H, H$^{+}$, H$^{-}$, He, He$^{+}$, He$^{++}$, e$^{-}$, H$_{2}$, H$_{2}^{+}$, C, C$^{+}$, O, O$^{+}$, Si, Si$^{+}$, and Si$^{++}$). We couple KROME with the fully three-dimensional Smoothed-particle hydrodynamics (SPH) code GRADSPH. With this framework we investigate the collapse of a metal-enhanced cloud, exploring the fragmentation process and the formation of stars. We found that the metallicity has a clear impact on the thermodynamics of the collapse, allowing the cloud to reach the CMB temperature floor for a metallicity $Z/Z_{\odot}=10^{-2}$, which is in agreement with previous work. Moreover, we found that adopting the abundance pattern given by the star SMSS J031300.36-670839.3 the thermodynamics behavior is very similar to simulations with a metallicity of $Z/Z_{\odot}=10^{-2}$, due to the high carbon abundance. As long as only metal line cooling is considered, our results support the metallicity threshold proposed by previous works, which will very likely regulate the first episode of fragmentation and potentially determine the masses of the resulting star clusters.

astro-ph.GA↗