Searcharxiv⌕ Search

arXiv subjects

C. Peters

Publications and source records attributed to C. Peters.

5 recordsLinked to original sources
arXiv2018

A compact and light-weight refractive telescope for the observation of extensive air showers

A general purpose instrument for imaging of Cherenkov light or fluorescence light emitted by extensive air showers is presented. Its refractive optics allows for a compact and light-weight design with a wide field-of-view of 12{\deg}. The optical system features a 0.5 m diameter Fresnel lens and a camera with 61 pixels composed of Winston cones and large-sized 6x6 mm photo sensors. As photo sensors, semi conductor light sensors (SiPMs) are utilized. The camera provides a high photon detection efficiency together with robust operation. The enclosed optics permit operation in regions of harsh environmental conditions. The low price of the telescope allows the production of a large number of telescopes and the application of the instrument in various projects, such as FAMOUS for the Pierre Auger Observatory, HAWC's Eye for HAWC or IceAct for IceCube. In this paper the novel design of this telescope and first measurements are presented.

astro-ph.IM↗
arXiv2018

An integrated general purpose SiPM based optical module with a high dynamic range

Silicon photomultipliers (SiPMs) are semiconductor-based light-sensors offering a high gain, a mechanically and optically robust design and high photon detection efficiency. Due to these characteristics, they started to replace conventional photomultiplier tubes in many applications in recent years. This paper presents an optical module based on SiPMs designed for the application in scintillators as well as lab measurements. The module hosts the SiPM bias voltage supply and three pre-amplifiers with different gain levels to exploit the full dynamic range of the SiPMs. Two SiPMs, read-out in parallel, are equipped with light guides to increase the sensitive area. The light guides are optimized for the read-out of wavelength shifting fibers as used in many plastic scintillator detectors. The optical and electrical performance of the module is characterized in detail in laboratory measurements. Prototypes have been installed and tested in a modified version of the Scintillator Surface Detector developed for AugerPrime, the upgrade of the Pierre Auger Observatory. The SiPM module is operated in the Argentinian Pampas and first data proves its usability in such harsh environments.

physics.ins-det↗
arXiv2000

Design and Construction of the 3.2 Mev Cathode Assembly for Darht II

A 3.2 MeV injector has been designed and built for the Darht II Project at Los Alamos Lab. The installation of the complete injector system is nearing completion at this time. The requirements for the injector are to produce a 3.2 MeV, 2000 ampere electron pulse with a flattop width of at least 2-microseconds and emittance of less than 0.15 p cm-rad normalized. A 16.5 cm diameter hot emitter cathode is used. This paper will describe the design and fabrication of major Cathode Assembly components and test performance of subsystems to date. Mechanical and thermal issues will be emphasized. More detailed discussion of the active alignment system used to maintain the stringent cathode alignment requirement.

hep-ex↗
arXiv2000

Design and Construction of the 3.2 Mev High Voltage Column for Darht II

A 3.2 MeV injector has been designed and built for the Darht II Project at Los Alamos Lab. The installation of the complete injector system is nearing completion at this time. The requirements for the injector are to produce a 3.2 MeV, 2000 ampere electron pulse with a flattop width of at least 2-microseconds and emittance of less than 0.15 p cm-rad normalized. A large high voltage column has been built and installed. The column is vertically oriented, is 4.4 meters long, 1.2 meters in diameter, and weights 5700 kilograms. A novel method of construction has been employed which utilizes bonded mycalex insulating rings. This paper will describe the design, construction, and testing completed during construction. Mechanical aspects of the design will be emphasized.

hep-ex↗