arXiv subjects

C. Robin

Publications and source records attributed to C. Robin.

8 recordsLinked to original sources

arXiv2022

Gaia DR3: Apsis III -- Non-stellar content and source classification

Context. As part of the third Gaia data release, we present the contributions of the non-stellar and classification modules from the eighth coordination unit (CU8) of the Data Processing and Analysis Consortium, which is responsible for the determination of source astrophysical parameters using Gaia data. This is the third in a series of three papers describing the work done within CU8 for this release. Aims. For each of the five relevant modules from CU8, we summarise their objectives, the methods they employ, their performance, and the results they produce for Gaia DR3. We further advise how to use these data products and highlight some limitations. Methods. The Discrete Source Classifier (DSC) module provides classification probabilities associated with five types of sources: quasars, galaxies, stars, white dwarfs, and physical binary stars. A subset of these sources are processed by the Outlier Analysis (OA) module, which performs an unsupervised clustering analysis, and then associates labels with the clusters to complement the DSC classification. The Quasi Stellar Object Classifier (QSOC) and the Unresolved Galaxy Classifier (UGC) determine the redshifts of the sources classified as quasar and galaxy by the DSC module. Finally, the Total Galactic Extinction (TGE) module uses the extinctions of individual stars determined by another CU8 module to determine the asymptotic extinction along all lines of sight for Galactic latitudes |b| > 5 deg. Results. Gaia DR3 includes 1591 million sources with DSC classifications; 56 million sources to which the OA clustering is applied; 1.4 million sources with redshift estimates from UGC; 6.4 million sources with QSOC redshift; and 3.1 million level 9 HEALPixes of size 0.013 squared degree, where the extinction is evaluated by TGE.

astro-ph.GA↗

arXiv2022

Gaia Data Release 3: Analysis of the Gaia BP/RP spectra using the General Stellar Parameterizer from Photometry

We present the General Stellar Parameterizer from Photometry (GSP-Phot), which is part of the astrophysical parameters inference system (Apsis). GSP-Phot is designed to produce a homogeneous catalogue of parameters for hundreds of millions of single non-variable stars based on their astrometry, photometry, and low-resolution BP/RP spectra. These parameters are effective temperature, surface gravity, metallicity, absolute $M_G$ magnitude, radius, distance, and extinction for each star. GSP-Phot uses a Bayesian forward-modelling approach to simultaneously fit the BP/RP spectrum, parallax, and apparent $G$ magnitude. A major design feature of GSP-Phot is the use of the apparent flux levels of BP/RP spectra to derive, in combination with isochrone models, tight observational constraints on radii and distances. We carefully validate the uncertainty estimates by exploiting repeat Gaia observations of the same source. The data release includes GSP-Phot results for 471 million sources with $G<19$. Typical differences to literature values are 110 K for $T_{\rm eff}$ and 0.2-0.25 for $\log g$, but these depend strongly on data quality. In particular, GSP-Phot results are significantly better for stars with good parallax measurements ($\varpi/\sigma_varpi>20$), mostly within 2kpc. Metallicity estimates exhibit substantial biases compared to literature values and are only useful at a qualitative level. However, we provide an empirical calibration of our metallicity estimates that largely removes these biases. Extinctions $A_0$ and $A_{\rm BP}$ show typical differences from reference values of 0.07-0.09 mag. MCMC samples of the parameters are also available for 95% of the sources. GSP-Phot provides a homogeneous catalogue of stellar parameters, distances, and extinctions that can be used for various purposes, such as sample selections (OB stars, red giants, solar analogues etc.).

astro-ph.SR↗

arXiv2022

Gaia Data Release 3: Astrophysical parameters inference system (Apsis) I -- methods and content overview

Gaia Data Release 3 contains a wealth of new data products for the community. Astrophysical parameters are a major component of this release. They were produced by the Astrophysical parameters inference system (Apsis) within the Gaia Data Processing and Analysis Consortium. The aim of this paper is to describe the overall content of the astrophysical parameters in Gaia Data Release 3 and how they were produced. In Apsis we use the mean BP/RP and mean RVS spectra along with astrometry and photometry, and we derive the following parameters: source classification and probabilities for 1.6 billion objects, interstellar medium characterisation and distances for up to 470 million sources, including a 2D total Galactic extinction map, 6 million redshifts of quasar candidates and 1.4 million redshifts of galaxy candidates, along with an analysis of 50 million outlier sources through an unsupervised classification. The astrophysical parameters also include many stellar spectroscopic and evolutionary parameters for up to 470 million sources. These comprise Teff, logg, and m_h (470 million using BP/RP, 6 million using RVS), radius (470 million), mass (140 million), age (120 million), chemical abundances (up to 5 million), diffuse interstellar band analysis (0.5 million), activity indices (2 million), H-alpha equivalent widths (200 million), and further classification of spectral types (220 million) and emission-line stars (50 thousand). This catalogue is the most extensive homogeneous database of astrophysical parameters to date, and it is based uniquely on Gaia data.

astro-ph.GA↗

arXiv2022

Gaia Data Release 3: Apsis II -- Stellar Parameters

The third Gaia data release contains, beyond the astrometry and photometry, dispersed light for hundreds of millions of sources from the Gaia prism spectra (BP and RP) and the spectrograph (RVS). This data release opens a new window on the chemo-dynamical properties of stars in our Galaxy, essential knowledge for understanding the structure, formation, and evolution of the Milky Way. To provide insight into the physical properties of Milky Way stars, we used these data to produce a uniformly-derived, all-sky catalog of stellar astrophysical parameters (APs): Teff, logg, [M/H], [$\alpha$/Fe], activity index, emission lines, rotation, 13 chemical abundance estimates, radius, age, mass, bolometric luminosity, distance, and dust extinction. We developed the Apsis pipeline to infer APs of Gaia objects by analyzing their astrometry, photometry, BP/RP, and RVS spectra. We validate our results against other literature works, including benchmark stars, interferometry, and asteroseismology. Here we assessed the stellar analysis performance from Apsis statistically. We describe the quantities we obtained, including our results' underlying assumptions and limitations. We provide guidance and identify regimes in which our parameters should and should not be used. Despite some limitations, this is the most extensive catalog of uniformly-inferred stellar parameters to date. These comprise Teff, logg, and [M/H] (470 million using BP/RP, 6 million using RVS), radius (470 million), mass (140 million), age (120 million), chemical abundances (5 million), diffuse interstellar band analysis (1/2 million), activity indices (2 million), H{$\alpha$} equivalent widths (200 million), and further classification of spectral types (220 million) and emission-line stars (50 thousand). More precise and detailed astrophysical parameters based on epoch BP, RP, and RVS are planned for the next Gaia data release.

astro-ph.SR↗

arXiv2022

Gaia Data Release 3. Stellar chromospheric activity and mass accretion from Ca II IRT observed by the Radial Velocity Spectrometer

The Gaia Radial Velocity Spectrometer provides the unique opportunity of a spectroscopic analysis of millions of stars at medium-resolution in the near-infrared. This wavelength range includes the Ca II infrared triplet (IRT), which is a good diagnostics of magnetic activity in the chromosphere of late-type stars. Here we present the method devised for inferring the Gaia stellar activity index together with its scientific validation. A sample of well studied PMS stars is considered to identify the regime in which the Gaia stellar activity index may be affected by mass accretion. The position of these stars in the colour-magnitude diagram and the correlation with the amplitude of the photometric rotational modulation is also scrutinised. Three regimes of the chromospheric stellar activity are identified, confirming suggestions made by previous authors on much smaller $R'_{\rm HK}$ datasets. The highest stellar activity regime is associated with PMS stars and RS CVn systems, in which activity is enhanced by tidal interaction. Some evidence of a bimodal distribution in MS stars with $T_{\rm eff}\ge$ 5000 K is also found, which defines the two other regimes, without a clear gap in between. Stars with 3500 K$\le T_{\rm eff} \le$ 5000 K are found to be either very active PMS stars or active MS stars with a unimodal distribution in chromospheric activity. A dramatic change in the activity distribution is found for $T_{\rm eff}\le$3500 K, with a dominance of low activity stars close to the transition between partially- and fully-convective stars and a rise in activity down into the fully-convective regime.

astro-ph.SR↗

arXiv2022

Gaia Data Release 3: Analysis of RVS spectra using the General Stellar Parametriser from spectroscopy

The chemo-physical parametrisation of stellar spectra is essential for understanding the nature and evolution of stars and of Galactic stellar populations. Gaia DR3 contains the parametrisation of RVS data performed by the General Stellar Parametriser-spectroscopy, module. Here we describe the parametrisation of the first 34 months of RVS observations. GSP-spec estimates the chemo-physical parameters from combined RVS spectra of single stars. The main analysis workflow described here, MatisseGauguin, is based on projection and optimisation methods and provides the stellar atmospheric parameters; the individual chemical abundances of N, Mg, Si, S, Ca, Ti, Cr, FeI, FeII, Ni, Zr, Ce and Nd; the differential equivalent width of a cyanogen line; and the parameters of a DIB feature. Another workflow, based on an artificial neural network, provides a second set of atmospheric parameters that are useful for classification control. We implement a detailed quality flag chain considering different error sources. With about 5.6 million stars, the Gaia DR3 GSP-spec all-sky catalogue is the largest compilation of stellar chemo-physical parameters ever published and the first one from space data. Internal and external biases have been studied taking into account the implemented flags. In some cases, simple calibrations with low degree polynomials are suggested. The homogeneity and quality of the estimated parameters enables chemo-dynamical studies of Galactic stellar populations, interstellar extinction studies from individual spectra, and clear constraints on stellar evolution models. We highly recommend that users adopt the provided quality flags for scientific exploitation . The Gaia DR3 GSP-spec catalogue is a major step in the scientific exploration of Milky Way stellar populations, confirming the Gaia promise of a new Galactic vision (abridged).

astro-ph.GA↗

arXiv2016

Description of nuclear systems with a self-consistent configuration-mixing approach. II: Application to structure and reactions in even-even sd-shell nuclei

The variational multiparticle-multihole configuration mixing approach (MPMH) to nuclei has been proposed about a decade ago. While the first applications followed rapidly, the implementation of the full formalism of this method has only been recently completed and applied in [C. Robin, N. Pillet, D. Pe\~na Arteaga and J.-F. Berger, Phys. Rev. C 93, 024302 (2016)] to $^{12}$C as a test-case. The main objective of the present paper is to carry on the study that was initiated in that reference, in order to put the MPMH method to more stringent tests. To that aim we perform a systematic study of even-even sd-shell nuclei. The wave function of these nuclei is taken as a configuration mixing built on orbitals of the sd-shell, and both the mixing coefficients of the nuclear state and the single-particle wave functions are determined consistently from the same variational principle. The calculations are done using the D1S Gogny force. Various ground-state properties are analyzed. In particular, the correlation content and composition of the wave function as well as the single-particle orbitals and energies are examined. Binding energies and charge radii are also calculated and compared to experiment. The description of the first excited state is also examined and the corresponding transition densities are used as input for the calculation of inelastic electron and proton scattering. Special attention is paid to the effect of the optimization of the single-particle states consistently with the correlations of the system. Globally, the results are satisfying and encouraging. In particular, charge radii and excitation energies are nicely reproduced. However, the chosen valence-space truncation scheme precludes achieving maximum collectivity in the studied nuclei. Further refinement of the method and a better-suited interaction are necessary to remedy this situation.

nucl-th↗

arXiv2015

Description of nuclear systems with a self-consistent configuration-mixing approach. I: Theory, algorithm, and application to the $^{12}$C test nucleus

Although self-consistent multi-configuration methods have been used for decades to address the description of atomic and molecular many-body systems, only a few trials have been made in the context of nuclear structure. This work aims at the development of such an approach to describe in a unified way various types of correlations in nuclei, in a self-consistent manner where the mean-field is improved as correlations are introduced. The goal is to reconcile the usually set apart Shell-Model and Self-Consistent Mean-Field methods. This approach is referred as "variational multiparticle-multihole configuration mixing method". It is based on a double variational principle which yields a set of two coupled equations that determine at the same time the expansion coefficients of the many-body wave function and the single particle states. The formalism is derived and discussed in a general context, starting from a three-body Hamiltonian. Links to existing many-body techniques such as the formalism of Green's functions are established. First applications are done using the two-body D1S Gogny effective force. The numerical procedure is tested on the $^{12}$C nucleus in order to study the convergence features of the algorithm in different contexts. Ground state properties as well as single-particle quantities are analyzed, and the description of the first $2^+$ state is examined. This study allows to validate our numerical algorithm and leads to encouraging results. In order to test the method further, we will realize in the second article of this series, a systematic description of more nuclei and observables obtained by applying the newly-developed numerical procedure with the same Gogny force. As raised in the present work, applications of the variational multiparticle-multihole configuration mixing method will however ultimately require the use of an extended and more constrained Gogny force.

nucl-th↗