arXiv subjects

C. Sasso

Publications and source records attributed to C. Sasso.

At least 19 recordsLinked to original sources

arXiv2026

A view of the evolution of a CME and the associated wave-trains at high spatial and temporal resolution

Context. Studying the kinematic and dynamic evolution of fast eruptive events from the middle to high solar corona is a primary objective of the Metis coronagraph on Solar Orbiter. During perihelion, Metis acquires visible light images at a 20s cadence, reaching a spatial resolution of around 2000 km at 0.28 au. This enables capturing coronal mass ejections (CMEs) and transient structures with unprecedented spatial and temporal resolution. Aims. On October 8-9, 2022, an extensive CME was observed by Metis at 0.3 au (resolution: 4.4 $10^{3}$ km/pixel). We aim to exploit this high resolution to resolve multiple substructures within the CME front, revealing plasma elements with distinct trajectories and speeds to provide a detailed kinematic characterization of the eruption. Methods. A normalization-based running difference algorithm was applied to enhance the complex morphology. Height-time diagrams were used to estimate propagation speeds and frequency variations. A 3D flux rope reconstruction, combined with multi-spacecraft coronagraphs and disk imagers, enabled tracking the CME from its initiation in the lower corona to approximately 5 solar radii. Joint observations with Solar Orbiter EUI-FSI provided insights into the eruption's onset, while Metis captured its development into the middle corona. Results. Metis observations resolve the CME's fine structure and internal plasma motions. The detection of circular, fast-propagating wavefronts (500 km/s, 3 minute period) at the western flank suggests wave excitation and magnetic reconfiguration processes. Multiple interpretations are proposed for these coronal wave trains, including quasi periodic propagating fast modes, offering new insights into wave generation and energy transport in the solar corona.

astro-ph.SR↗

arXiv2025

CoSEE-Cat: A Comprehensive Solar Energetic Electron event Catalogue obtained from combined in situ and remote-sensing observations from Solar Orbiter -- Catalogue description and first statistical results

(abridged) The acceleration of particles at the Sun and their propagation through interplanetary space are key topics in heliophysics. Specifically, solar energetic electrons (SEEs) measured in situ can be linked to solar flares and coronal mass ejections (CMEs), which can be observed remotely in radio, optical, UV and X-rays. Solar Orbiter, equipped with a wide range of remote-sensing and in situ detectors, provides an excellent opportunity to investigate SEEs and their solar origin from the inner heliosphere. The Comprehensive Solar Energetic Electron event Catalogue (CoSEE-Cat) provides details for all SEE events measured in situ by Solar Orbiter, as well as associated flares, CMEs, and radio bursts. The catalogue contains key parameters of the SEEs, as derived from the Energetic Particle Detector (EPD), complemented with basic parameters of associated X-ray flares provided by STIX, information on eruptive phenomena seen by EUI, characteristics of type III radio bursts observed by RPW, and indications of CME observed by Metis and SoloHI. The conditions in interplanetary space were characterised using SWA and MAG measurements. Finally, data-driven modelling with the Magnetic Connectivity Tool provided an independent estimate of the solar source position of the SEEs. The first data release contains 303 SEE events observed from November 2020 until the end of 2022. In this paper, we describe the catalogue and provide a first statistical analysis. Preliminary results support the flare-related origin of events with an impulsive ion composition and the association of gradual events with extended structures such as CME-driven shocks or erupting flux ropes. We also show that the commonly observed delays of the solar release times of the SEEs relative to the associated X-ray flares and type III radio bursts are at least partially due to propagation effects.

astro-ph.SR↗

arXiv2025

First detection of acoustic-like flux in the middle solar corona

Waves are thought to play a significant role in the heating of the solar atmosphere and the acceleration of the wind. Among the many types of waves observed in the Sun, the so-called p-modes with a 3 mHz frequency peak dominate the lower atmosphere. In the presence of magnetic fields, these waves can be converted into magnetohydrodynamic modes, which then leak into the corona through magnetic conduits. High-resolution off-limb observations have indeed revealed signatures of ubiquitous and global 3 mHz oscillations in the corona, although limited to low heights and to incompressible modes. We present high-cadence, high-resolution observations of the corona in the range 1.7 - 3.6 solar radii taken in broad-band 580-640 nm visible light by the Metis coronagraph aboard Solar Orbiter. These observations were designed to investigate density fluctuations in the middle corona. The data were acquired over several days in March 2022, October 2022, and for two days in April 2023. We selected representative regions of the corona on three sample dates. Analysis of the data in those regions revealed the presence of periodic density fluctuations. By examining several time-distance diagrams, we determined the main properties (apparent propagation speed, amplitude) of those fluctuations. We also show power spectra in selected locations in order to determine the dominant frequencies. We found wave-like, compressible fluctuations of low amplitude - of the order of 0.1 % of the background - in several large-scale regions in the corona at least up to 2.5 solar radii. We also found that the apparent propagation speeds of these perturbations typically fall in the range 150 - 450 km/s. A power spectrum analysis of time series revealed an excess power in the range 2-7 mHz, often with peaks at 3 or 5 mHz, i.e. in a range consistent with p-mode frequencies of the lower solar atmosphere.

astro-ph.SR↗

arXiv2025

Metis Observations of Alfv\'{e}nic Outflows Driven by Interchange Reconnection in a Pseudostreamer

This study presents observations of a large pseudostreamer solar eruption and, in particular, the post-eruption relaxation phase, as captured by Metis onboard the Solar Orbiter on October 12, 2022, during its perihelion passage. Utilizing total brightness data, we observe the outward propagation of helical features up to 3 solar radii along a radial column that appears to correspond to the stalk of the pseudostreamer. The helical structures persisted for more than 3 hours following a jet-like coronal mass ejection associated with a polar crown prominence eruption. A notable trend is revealed: the inclination of these features decreases as their polar angle and height increase. Additionally, we measured their helix pitch. Despite a 2-minute time cadence limiting direct correspondence among filamentary structures in consecutive frames, we find that the Metis helical structure may be interpreted as a consequence of twist (nonlinear torsional Alfv\'{e}n waves) and plasma liberated by interchange reconnection. A comparison was performed of the helix parameters as outlined by fine-scale outflow features with those obtained from synthetic white-light images derived from the high-resolution magnetohydrodynamics simulation of interchange reconnection in a pseudostreamer topology by Wyper et al. (2022). A remarkable similarity between the simulation-derived images and the observations was found. We conjecture that these Metis observations may represent the upper end in spatial and energy scale of the interchange reconnection process that has been proposed recently as the origin of the Alfv\'{e}nic solar wind.

astro-ph.SR↗

arXiv2024

Study of solar brightness profiles in the 18-26 GHz frequency range with INAF radio telescopes II. Evidence for coronal emission

One of the most important objectives of solar physics is the physical understanding of the solar atmosphere, the structure of which is also described in terms of the density (N) and temperature (T) distributions of the atmospheric matter. Several multi-frequency analyses show that the characteristics of these distributions are still debated, especially for the outer coronal emission. We aim to constrain the T and N distributions of the solar atmosphere through observations in the centimetric radio domain. We employ single-dish observations from two of the INAF radio telescopes at the K-band frequencies (18 - 26 GHz). We investigate the origin of the significant brightness temperature ($T_B$) level that we detected up to the upper corona ($\sim 800$ Mm of altitude with respect to the photospheric solar surface). To probe the physical origin of the atmospheric emission and to constrain instrumental biases, we reproduced the solar signal by convolving specific 2D antenna beam models. The analysis of the solar atmosphere is performed by adopting a physical model that assumes the thermal bremsstrahlung as the emission mechanism, with specific T and N distributions. The modelled $T_B$ profiles are compared with those observed by averaging solar maps obtained during the minimum of solar activity (2018 - 2020). The T and N distributions are compatible (within $25\%$ of uncertainty) with the model up to $\sim 60$ Mm and $\sim 100$ Mm of altitude, respectively. The analysis of the role of the antenna beam pattern on our solar maps proves the physical nature of the atmospheric emission in our images up to the coronal tails seen in our $T_B$ profiles. The challenging analysis of the coronal radio emission at higher altitudes, together with the data from satellite instruments will require further multi-frequency measurements.

astro-ph.SR↗

arXiv2023

Eruptive events with exceptionally bright emission in HI Ly-alpha observed by the Metis coronagraph

Metis, the coronagraph on board Solar Orbiter, provides for the first time coronagraphic imaging in the ultraviolet HI Ly-alpha line and, simultaneously, in polarized visible light, thus providing a host of information on the properties of CMEs and solar eruptions like their overall dynamics, time evolution, mass content, and outflow propagation velocity in the expanding corona. We analyzed in this work six CMEs observed by Metis between April and October 2021, which are characterized by a very strong HI Ly-alpha emission. We studied in particular the morphology, kinematics, and the temporal and radial evolution of the emission of such events, focusing on the brightest UV features. The kinematics of the eruptive events under consideration were studied by determining the height-time profiles of the brightest parts on the Metis plane of the sky. Furthermore, the 3D position in the heliosphere of the CMEs were determined by employing co-temporal images from two other coronagraphs: LASCO/C2 onboard SOHO, and COR2 onboard STEREO-A. Finally, the radiometrically calibrated Metis images of the bright UV features were analyzed to provide estimates of their volume and density. From the kinematics and radiometric analyses, we obtained indications of the temperatures of the bright UV cores of these events. The analysis of these strong UV-emitting features associated with coronal mass ejections demonstrates the capabilities of the current constellation of space coronagraphs, Metis, LASCO/C2, and COR2, in providing a complete characterization of the structure and dynamics of eruptive events in their propagation phase from their inception up to several solar radii. Furthermore, we show how the unique capabilities of the Metis instrument to observe these events in both HI Ly-alpha line and polarized VL radiation allow plasma diagnostics on the thermal state of these events.

astro-ph.SR↗

arXiv2023

In-flight validation of Metis Visible-light Polarimeter Coronagraph on board Solar Orbiter

Context. The Metis coronagraph is one of the remote-sensing instruments of the ESA/NASA Solar Orbiter mission. Metis is aimed at the study of the solar atmosphere and solar wind by simultaneously acquiring images of the solar corona at two different wavelengths; visible-light (VL) within a band ranging from 580 nm to 640 nm, and in the HI Ly-alpha 121.6 +/- 10 nm ultraviolet (UV) light. The visible-light channel includes a polarimeter with electro-optically modulating Liquid Crystal Variable Retarders (LCVRs) to measure the linearly polarized brightness of the K-corona to derive the electron density. Aims. In this paper, we present the first in-flight validation results of the Metis polarimetric channel together with a comparison to the on-ground calibrations. It is the validation of the first use in deep space (with hard radiation environment) of an electro-optical device: a liquid crystal-based polarimeter. Methods. We used the orientation of the K-corona's linear polarization vector during the spacecraft roll maneuvers for the in-flight calibration. Results. The first in-flight validation of the Metis coronagraph on-board Solar Orbiter shows a good agreement with the on-ground measurements. It confirms the expected visible-light channel polarimetric performance. A final comparison between the first pB obtained by Metis with the polarized brightness (pB) obtained by the space-based coronagraph LASCO and the ground-based coronagraph KCor shows the consistency of the Metis calibrated results.

astro-ph.SR↗

arXiv2022

Prominence eruption observed in He II 304 {\AA} up to $>6 R_\sun$ by EUI/FSI aboard Solar Orbiter

We report observations of a unique, large prominence eruption that was observed in the He II 304 {\AA} passband of the the Extreme Ultraviolet Imager/Full Sun Imager telescope aboard Solar Orbiter on 15-16 February 2022. Observations from several vantage points (Solar Orbiter, the Solar-Terrestrial Relations Observatory, the Solar and Heliospheric Observatory, and Earth-orbiting satellites) were used to measure the kinematics of the erupting prominence and the associated coronal mass ejection. Three-dimensional reconstruction was used to calculate the deprojected positions and speeds of different parts of the prominence. Observations in several passbands allowed us to analyse the radiative properties of the erupting prominence. The leading parts of the erupting prominence and the leading edge of the corresponding coronal mass ejection propagate at speeds of around 1700 km/s and 2200 km/s, respectively, while the trailing parts of the prominence are significantly slower (around 500 km/s). Parts of the prominence are tracked up to heights of over $6 R_\sun$. The He II emission is probably produced via collisional excitation rather than scattering. Surprisingly, the brightness of a trailing feature increases with height. The reported prominence is the first observed in He II 304 {\AA} emission at such a great height (above 6 $R_\sun$).

astro-ph.SR↗

arXiv2022

A Coronal Mass Ejection followed by a prominence eruption and a plasma blob as observed by Solar Orbiter

On February 12, 2021 two subsequent eruptions occurred above the West limb, as seen along the Sun-Earth line. The first event was a typical slow Coronal Mass Ejection (CME), followed $\sim 7$ hours later by a smaller and collimated prominence eruption, originating Southward with respect to the CME, followed by a plasma blob. These events were observed not only by SOHO and STEREO-A missions, but also by the suite of remote sensing instruments on-board Solar Orbiter (SolO). This work shows how data acquired by the Full Sun Imager (FSI), Metis coronagraph, and Heliospheric Imager (SoloHI) from the SolO perspective can be combined to study the eruptions and the different source regions. Moreover, we show how Metis data can be analyzed to provide new information about solar eruptions. Different 3D reconstruction methods were applied to the data acquired by different spacecraft including remote sensing instruments on-board SolO. Images acquired by both Metis channels in the Visible Light (VL) and H I Lyman$-\alpha$ line (UV) were combined to derive physical information on the expanding plasma. The polarization ratio technique was also applied for the first time to the Metis images acquired in the VL channel. The two eruptions were followed in 3D from their source region to their expansion in the intermediate corona. Thanks to the combination of VL and UV Metis data, the formation of a post-CME Current Sheet (CS) was followed for the first time in the intermediate corona. The plasma temperature gradient across a post-CME blob propagating along the CS was also measured for the first time. Application of the polarization ratio technique to Metis data shows that, thanks to the combination of four different polarization measurements, the errors are reduced by $\sim 5-7$\%, thus better constraining the 3D distribution of plasma.

astro-ph.SR↗

arXiv2021

Implications of spicule activity on coronal loop heating and catastrophic cooling

We report on the properties of coronal loop foot-point heating with observations at the highest resolution, from the CRisp Imaging Spectro-Polarimeter (CRISP) located at the Swedish 1-m Solar Telescope (SST) and co-aligned NASA Solar Dynamics Observatory (SDO) observations, of Type II spicules in the chromosphere and their signatures in the EUV corona. Here, we address one important issue, as to why there is not always a one-to-one correspondence, between Type II spicules and hot coronal plasma signatures, i.e. beyond TR temperatures. We do not detect any difference in their spectral properties in a quiet Sun region compared to a region dominated by coronal loops. On the other hand, the number density close to the foot-points in the active region is found to be an order of magnitude higher than in the quiet Sun case. A differential emission measure analysis reveals a peak at $\sim 5 \times 10^5$ K on the order of 10$^{22}$~cm$^{-5}$~K$^{-1}$. Using this result as a constraint, we conduct numerical simulations and show that with an energy input of $1.25 \times 10^{24}$ erg (corresponding to $\sim$10 RBEs contributing to the burst) we manage to reproduce the observation very closely. However, simulation runs with lower thermal energy input do not reproduce the synthetic AIA $171 {\AA}$ signatures, indicating that there is a critical number of spicules required in order to account for the AIA $171{\AA}$ signatures in the simulation. Furthermore, the higher energy ($1.25 \times 10^{24}$ ergs) simulations reproduce catastrophic cooling with a cycle duration of $\sim$5 hours, matching a periodicity we observe in the EUV observations.

astro-ph.SR↗

arXiv2021

Effects of the chromospheric Ly{\alpha} line profile shape on the determination of the solar wind HI outflow velocity using the Doppler dimming technique

The determination of solar wind outflow velocity is fundamental in order to probe the mechanisms of wind acceleration in the corona. We aim to study, via the Doppler dimming technique, the effects that the chromospheric Ly{\alpha} line profile shape causes on the determination of the outflow speed of coronal HI atoms. The Doppler dimming technique takes into account the decrease of coronal Ly{\alpha} radiation in regions where HI atoms flow out in the solar wind. Starting from UV observations (UVCS/SOHO) of the coronal Ly{\alpha} line and simultaneous measurements of pB (LASCO/SOHO and Mk3/MLSO), we studied the effect of the pumping chromospheric Ly{\alpha} line profile through measurements from SOHO/SUMER, UVSP/SMM and LPSP/OSO-8, taken from representative on-disk regions and as a function of time during the solar activity cycle. In particular, we considered the effect of four chromospheric line parameters: line width, depth of the central reversal, asymmetry and distance of the peaks. We find that the range of variability of these parameters is of about 50% for the width, 69% for the depth of the central reversal, 35% for the asymmetry, and 50% for the distance of the peaks. Then, we find that the variability of the pumping Ly{\alpha} profile affects the estimates of the coronal HI velocity by about 9-12%. Therefore, this uncertainty is smaller than other physical quantities uncertainties, and a constant in time and unique shape of the Ly{\alpha} profile over the solar disk can be adopted in order to estimate the solar wind outflow velocity.

astro-ph.SR↗

arXiv2021

First light observations of the solar wind in the outer corona with the Metis coronagraph

The investigation of the wind in the solar corona initiated with the observations of the resonantly scattered UV emission of the coronal plasma obtained with UVCS-SOHO, designed to measure the wind outflow speed by applying the Doppler dimming diagnostics. Metis on Solar Orbiter complements the UVCS spectroscopic observations, performed during solar activity cycle 23, by simultaneously imaging the polarized visible light and the HI Ly-alpha corona in order to obtain high-spatial and temporal resolution maps of the outward velocity of the continuously expanding solar atmosphere. The Metis observations, on May 15, 2020, provide the first HI Ly-alpha images of the extended corona and the first instantaneous map of the speed of the coronal plasma outflows during the minimum of solar activity and allow us to identify the layer where the slow wind flow is observed. The polarized visible light (580-640 nm), and the UV HI Ly-alpha (121.6 nm) coronal emissions, obtained with the two Metis channels, are combined in order to measure the dimming of the UV emission relative to a static corona. This effect is caused by the outward motion of the coronal plasma along the direction of incidence of the chromospheric photons on the coronal neutral hydrogen. The plasma outflow velocity is then derived as a function of the measured Doppler dimming. The static corona UV emission is simulated on the basis of the plasma electron density inferred from the polarized visible light. This study leads to the identification, in the velocity maps of the solar corona, of the high-density layer about +/-10 deg wide, centered on the extension of a quiet equatorial streamer present at the East limb where the slowest wind flows at about (160 +/- 18) km/s from 4 Rs to 6 Rs. Beyond the boundaries of the high-density layer, the wind velocity rapidly increases, marking the transition between slow and fast wind in the corona.

astro-ph.SR↗

arXiv2021

Cosmic-ray flux predictions and observations for and with Metis on board Solar Orbiter

The Metis coronagraph is one of the remote sensing instruments hosted on board the ESA/NASA Solar Orbiter mission. Metis is devoted to carry out the first simultaneous imaging of the solar corona in both visible light (VL) and ultraviolet (UV). High-energy particles penetrate spacecraft materials and may limit the performance of on-board instruments. A study of galactic cosmic-ray (GCR) tracks observed in the first VL images gathered by Metis during the commissioning phase for a total of 60 seconds of exposure time is presented here. A similar analysis is planned for the UV channel. A prediction of the GCR flux up to hundreds of GeV is made here for the first part of the Solar Orbiter mission to study the Metis coronagraph performance. GCR model predictions are compared to observations gathered on board Solar Orbiter by the EPD/HET experiment in the range 10 MeV-100 MeV in the summer 2020 and with previous measurements. Estimated cosmic-ray fluxes above 70 MeV n$^{-1}$ have been also parameterized and used for Monte Carlo simulations aiming at reproducing the cosmic-ray track observations in the Metis coronagraph VL images. The same parameterizations can also be used to study the performance of other detectors. By comparing observations of cosmic-ray tracks in the Metis VL images with FLUKA Monte Carlo simulations of cosmic-ray interactions in the VL detector, it is found that cosmic rays fire a fraction of the order of 10$^{-4}$ of the whole image pixel sample. Therefore, cosmic rays do not affect sensibly the quality of Metis VL images. It is also found that the overall efficiency for cosmic-ray identification in the Metis VL images is approximately equal to the contribution of Z$>$2 particles. As a result, the Metis coronagraph may play the role of a proton monitor for long-term GCR variations during the overall mission duration.

astro-ph.IM↗

arXiv2019

Comparing extrapolations of the coronal magnetic field structure at 2.5 solar radii with multi-viewpoint coronagraphic observations

The magnetic field shapes the structure of the solar corona but we still know little about the interrelationships between the coronal magnetic field configurations and the resulting quasi-stationary structures observed in coronagraphic images (as streamers, plumes, coronal holes). One way to obtain information on the large-scale structure of the coronal magnetic field is to extrapolate it from photospheric data and compare the results with coronagraphic images. Our aim is to verify if this comparison can be a fast method to check systematically the reliability of the many methods available to reconstruct the coronal magnetic field. Coronal fields are usually extrapolated from photospheric measurements typically in a region close to the central meridian on the solar disk and then compared with coronagraphic images at the limbs, acquired at least 7 days before or after to account for solar rotation, implicitly assuming that no significant changes occurred in the corona during that period. In this work, we combine images from three coronagraphs (SOHO/LASCO-C2 and the two STEREO/SECCHI-COR1) observing the Sun from different viewing angles to build Carrington maps covering the entire corona to reduce the effect of temporal evolution to ~ 5 days. We then compare the position of the observed streamers in these Carrington maps with that of the neutral lines obtained from four different magnetic field extrapolations, to evaluate the performances of the latter in the solar corona. Our results show that the location of coronal streamers can provide important indications to discriminate between different magnetic field extrapolations.

astro-ph.SR↗

arXiv2017

The Mg I b triplet and the 4571 {\AA} line as diagnostics of stellar chromospheric activity

Context. The Mg I 4571 {\AA} line and the b triplet are denoted in the literature as diagnostics of solar and stellar activity since their formation is in the low chromosphere. Aims. To investigate the potential of these four spectral lines as diagnostics of chromospheric activity in solar-like stars, studying the dependence of the intensity of these lines from local atmospheric changes by varying atmospheric models and stellar parameters. Methods. Starting with Next-Gen photospheric models, we build a grid of atmospheric models including photosphere, chromosphere and transition region and solve the radiative transfer to obtain synthetic profiles to compare with observed spectra of main-sequence, solar like stars with effective temperatures in the range 4800-6400 K, solar gravity and solar metallicity. Results. We find that the Mg I 4571 {\AA} line is significantly sensitive to local changes in the atmospheric model around the minimum temperature. Instead, the lines of the b triplet do not show significant responses to changes on the local atmospheric structure.

astro-ph.SR↗

arXiv2015

Modelling solar low-lying cool loops with optically thick radiative losses

We investigate the increase of the DEM (differential emission measure) towards the chromosphere due to small and cool magnetic loops (height $\lesssim8$~Mm, $T\lesssim10^5$~K). In a previous paper we analysed the conditions of existence and stability of these loops through hydrodynamic simulations, focusing on their dependence on the details of the optically thin radiative loss function used. In this paper, we extend those hydrodynamic simulations to verify if this class of loops exists and it is stable when using an optically thick radiative loss function. We study two cases: constant background heating and a heating depending on the density. The contribution to the transition region EUV output of these loops is also calculated and presented. We find that stable, quasi-static cool loops can be obtained by using an optically thick radiative loss function and a background heating depending on the density. The DEMs of these loops, however, fail to reproduce the observed DEM for temperatures between $4.6<\log T<4.8$. We also show the transient phase of a dynamic loop obtained by considering constant heating rate and find that its average DEM, interpreted as a set of evolving dynamic loops, reproduces quite well the observed DEM.

astro-ph.SR↗

arXiv2013

Magnetic structure of an activated filament in a flaring active region

While the magnetic field in quiescent prominences has been widely investigated, less is known about the field in activated prominences. We introduce observational results on the magnetic field structure of an activated filament in a flaring active region. We study, in particular, its magnetic structure and line-of-sight flows during its early activated phase, shortly before it displays signs of rotation. We invert the Stokes profiles of the chromospheric He I 10830 A triplet and the photospheric Si I 10827 A line observed in this filament by the VTT on Tenerife. Using these inversion results we present and interpret the first maps of velocity and magnetic field obtained in an activated filament, both in the photosphere and the chromosphere. Up to 5 different magnetic components are found in the chromospheric layers of the filament, while outside the filament a single component is sufficient to reproduce the observations. Magnetic components displaying an upflow are preferentially located towards the centre of the filament, while the downflows are concentrated along its periphery. Also, the upflowing gas is associated with an opposite-polarity magnetic configuration with respect to the photosphere, while the downflowing gas is associated with a same-polarity configuration. The activated filament has a rather complex structure. Nonetheless, it is compatible with a flux rope, although with a distorted one, in the normal configuration. The observations are best explained by a rising flux rope in which a part of the filament material is still stably stored (upflowing material, rising with the field), while a part is no longer stably stored and flows down along the field lines.

astro-ph.SR↗

arXiv2011

Solar low-lying cool loops and their contribution to the transition region EUV output

In the last 30 years, the existence of small and cool magnetic loops (height < 8 Mm, T < 10^5 K) has been proposed and debated to explain the increase of the DEM (differential emission measure) towards the chromosphere. We present hydrodynamic simulations of low-lying cool loops to study their conditions of existence and stability, and their contribution to the transition region EUV output. We find that stable, quasi-static cool loops (with velocities < 1 km/s) can be obtained under different and more realistic assumptions on the radiative losses function with respect to previous works. A mixture of the DEMs of these cool loops plus intermediate loops with temperatures between 10^5 and 10^6 K can reproduce the observed emission of the lower transition region at the critical turn-up temperature point (T ~ 2x10^5 K) and below T = 10^5 K.

astro-ph.SR↗