arXiv subjects

C. Stampfl

Publications and source records attributed to C. Stampfl.

15 recordsLinked to original sources

arXiv2021

Band-gap engineering, magnetic behavior and Dirac-semimetal character in the MoSi2N4 nanoribbon with armchair and zigzag edges

Motivated by the recent successful formation of the MoSi2N4 monolayer [Hong et al., Sci. 369, 670 (2020)], the structural, electronic and magnetic properties of MoSi2N4 nanoribbons (NRs) is investigated for the first time . The band structure calculations showed spin-polarization in zigzag edges and a non-magnetic semiconducting character in armchair edges. For armchair-edges, we identify an indirect to direct band gap shift compared to the MoSi2N4 monolayer, and its energy gap increases with increasing NR width. Anisotropic electrical and magnetic behavior is observed via band structure calculations in the zigzag and armchair edges, where, surprisingly, for the one type of zigzag-edges configuration, we identify a Dirac-semimetal character. The appearance of magnetism and Dirac-semimetal in MoSi2N4 ribbon can give rise to novel physical properties, which could be useful in applications for next-generation electronic devices.

cond-mat.mtrl-sci↗

arXiv2017

Machine learning the band gap properties of kesterite I$_2$-II-IV-V$_4$ quaternary compounds for photovoltaics applications

Kesterite I$_2$-II-IV-V$_4$ semiconductors are promising solar absorbers for photovoltaics applications. The band gap and it's character, either direct or indirect, are fundamental properties determining photovoltaic-device efficiency. We use a combination of accurate first-principles calculations and machine learning to predict the properties of the band gap for a large number of kesterite I$_2$-II-IV-V$_4$ semiconductors. In determining the magnitude of the fundamental gap, we compare results for a number of machine-learning models, and achieve a root mean squared error as low as 283 meV; the best results are achieved using support-vector regression with a radial-bias kernel. This error is well within the uncertainty of even the most advanced first-principles methods for calculating semiconductor band gaps. Predicting the direct--indirect property of the band gap is more challenging. After significant feature engineering, we are able to train a classifier that predicts the nature of the band gap with an accuracy of 89 \% using logistic regression. Using these trained models, the band gap properties of 1568 kesterite I$_2$-II-IV-V$_4$ compounds are predicted. We find 717 compounds with band gaps in the range 0.5 -- 2.5 eV that can potentially act as solar absorbers, and 242 materials with a band gap in the ``\emph{optimum range}" of 1.2 -- 1.8 eV. The stability of these 242 compounds is assessed by calculating the Energy Above Hull using the Materials Project database, and the band gaps are verified using hybrid functional calculations; in the end, we identify 25 compounds that are expected to be synthesizable, and have a band gap in the range 1.2 -- 1.8 eV -- most of which are previously unexplored. These results will be useful in the materials engineering of efficient photovoltaic devices.

cond-mat.mtrl-sci↗

arXiv2017

Detection of adsorbed transition-metal porphyrins by spin-dependent conductance of graphene nanoribbon

Electronic transport in a zig-zag-edge graphene nanoribbon (GNR) and its modification by adsorbed transition metal porphyrins is studied by means of density functional theory calculations. The detachment reaction of the metal centre of the porphyrin is investigated both in the gas phase and for molecules adsorbed on the GNR. As most metal porphyrins are very stable against this reaction, it is found that these molecules bind only weakly to a perfect nanoribbon. However, interaction with a single-atom vacancy in the GNR results in chemical bonding by the transition metal centre being shared between nitrogen atoms in the porphyrin ring and the carbon atoms next to the vacancy in the GNR. For both the physisorbed and the chemisorbed geometry, the inclusion of van der Waals interaction results in a significant enlargement of the binding energy and reduction of the adsorption height. Electronic transport calculations using non-equilibrium Greens functions show that the conductivity of the GNR is altered by the chemisorbed porphyrin molecules. Since the metal centers of porphyrins carry an element-specific magnetic moment, not only the net conductance, but also the spin-dependent conductance of the GNR is affected. In particular, the adsorption of Ru-porphyrin on the single-atom vacancy results in a very large spin polarization of the current of 88% at small applied source-drain voltages. Based on our results, we suggest that a spin valve constructed from a GNR with ferromagnetic contacts could be used as a sensitive detector that could discriminate between various metal porphyrins.

cond-mat.mes-hall↗

arXiv2004

Half-metallicity and efficient spin injection in AlN/GaN:Cr (0001) heterostructure

First-principles investigations of the structural, electronic and magnetic properties of Cr-doped AlN/GaN (0001) heterostructures reveal that Cr segregates into the GaN region, that these interfaces retain their important half-metallic character and thus yield efficient (100 %) spin polarized injection from a ferromagnetic GaN:Cr electrode through an AlN tunnel barrier - whose height and width can be controlled by adjusting the Al concentration in the graded bandgap engineered Al(1-x)Ga(x)N (0001) layers.

cond-mat.mtrl-sci↗

arXiv2001

Surface Core Level Shifts of Clean and Oxygen Covered Ru(0001)

We have performed high resolution XPS experiments of the Ru(0001) surface, both clean and covered with well-defined amounts of oxygen up to 1 ML coverage. For the clean surface we detected two distinct components in the Ru 3d_{5/2} core level spectra, for which a definite assignment was made using the high resolution Angle-Scan Photoelectron Diffraction approach. For the p(2x2), p(2x1), (2x2)-3O and (1x1)-O oxygen structures we found Ru 3d_{5/2} core level peaks which are shifted up to 1 eV to higher binding energies. Very good agreement with density functional theory calculations of these Surface Core Level Shifts (SCLS) is reported. The overriding parameter for the resulting Ru SCLSs turns out to be the number of directly coordinated O atoms. Since the calculations permit the separation of initial and final state effects, our results give valuable information for the understanding of bonding and screening at the surface, otherwise not accessible in the measurement of the core level energies alone.

cond-mat.mtrl-sci↗

arXiv2000

Theory of Adsorption on Metal Substrates

Contents: 5.1 Introduction 5.2 Concepts and definitions 5.3 The tight-binding picture of bonding 5.4 Adsorption of isolated adatoms 5.5 Alkali-metal adsorption: the traditional picture of on-surface adsorption 5.6 Substitutional adsorption and formation of surface alloys 5.7 Adsorption of CO on transition-metal surfaces - a model system for a simple molecular adsorbate 5.8 Co-adsorption [the example CO plus O on Ru(0001)] 5.9 Chemical reactions at metal surfaces 5.10 The catalytic oxidation of CO 5.11 Summary outline of main points

cond-mat.mtrl-sci↗

arXiv1999

Towards a first-principles theory of surface thermodynamics and kinetics

Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. To link these processes we combine state-of-the-art microscopic, and macroscopic phenomenological, theories. We apply our theory to the O/Ru(0001) system and calculate thermal desorption spectra, heat of adsorption, and the surface phase diagram. The agreement with experiment provides validity for our approach which thus identifies the way for a predictive simulation of surface thermodynamics and kinetics.

cond-mat.mtrl-sci↗

arXiv1999

Density-functional theory study of the catalytic oxidation of CO over transition metal surfaces

In recent years due to improvements in calculation methods and increased computer power, it has become possible to perform first-principles investigations for ``simple'' chemical reactions at surfaces. We have carried out such studies for the catalytic oxidation of CO at transition metal surfaces, in particular, at the ruthenium surface for which unusual behavior compared to other transition metal catalysts has been reported. High gas pressure catalytic reactor experiments have revealed that the reaction rate over Ru for oxidizing conditions is the highest of the transition metals considered -- in contrast, under ultra high vacuum conditions, the rate is by far the lowest. We find that important for understanding the pressure dependence of the reaction is the fact that Ru(0001) can support high concentrations of oxygen at the surface. Under these conditions, the O-metal bond is atypically weak compared to that at lower coverages. We have investigated a number of possible reaction pathways for CO oxidation for the conditions of high oxygen coverages, including scattering reactions of gas-phase CO at the oxygen covered surface (Eley-Rideal mechanism) as well as the Langmuir-Hinshelwood mechanism involving reaction between adsorbed CO molecules and O atoms.

cond-mat.mtrl-sci↗

arXiv1998

Coadsorption of CO and O on Ru(0001): A structural analysis by density functional theory

Knowledge of the atomic geometry of a surface is a prerequisite for any detailed understanding of the surface's electronic structure and chemical properties. Previous studies have convincingly demonstrated that density functional theory (DFT) yields accurate surface atomic geometries and that reliable predictions concerning stable and metastable phases can be made on the basis of the calculated energetics. In the present work we use DFT to investigate the atomic structure of four ordered coadsorbate phases of carbon monoxide and oxygen on Ru(0001). All of the structures have a (2x2) periodicity with differing concentrations of CO molecules and O atoms. For two of these phases dynamical low-energy electron diffraction (LEED) intensity analyses have been performed and the agreement between our DFT- and the LEED-determined structures is found to be very good. We predict the atomic geometry of the third phase for which no structural determination based on experiments has been made to date. We also predict the stability of a new ordered mixed phase.

cond-mat.mtrl-sci↗

arXiv1998

Theoretical analysis of the electronic structure of the stable and metastable c(2x2) phases of Na on Al(001): Comparison with angle-resolved ultra-violet photoemission spectra

Using Kohn-Sham wave functions and their energy levels obtained by density-functional-theory total-energy calculations, the electronic structure of the two c(2x2) phases of Na on Al(001) are analysed; namely, the metastable hollow-site structure formed when adsorption takes place at low temperature, and the stable substitutional structure appearing when the substrate is heated thereafter above ca. 180K or when adsorption takes place at room temperature from the beginning. The experimentally obtained two-dimensional band structures of the surface states or resonances are well reproduced by the calculations. With the help of charge density maps it is found that in both phases, two pronounced bands appear as the result of a characteristic coupling between the valence-state band of a free c(2x2)-Na monolayer and the surface-state/resonance band of the Al surfaces; that is, the clean (001) surface for the metastable phase and the unstable, reconstructed "vacancy" structure for the stable phase. The higher-lying band, being Na-derived, remains metallic for the unstable phase, whereas it lies completely above the Fermi level for the stable phase, leading to the formation of a surface-state/resonance band-structure resembling the bulk band-structure of an ionic crystal.

cond-mat.mtrl-sci↗

arXiv1997

Anomalous Behavior of Ru for Catalytic Oxidation: A Theoretical Study of the Catalytic Reaction CO + 1/2 O_2 --> CO_2

Recent experiments revealed an anomalous dependence of carbon monoxide oxidation at Ru(0001) on oxygen pressure and a particularly high reaction rate. Below we report density functional theory calculations of the energetics and reaction pathways of the speculated mechanism. We will show that the exceptionally high rate is actuated by a weakly but nevertheless well bound (1x1) oxygen adsorbate layer. Furthermore it is found that reactions via scattering of gas-phase CO at the oxygen covered surface may play an important role. Our analysis reveals, however, that reactions via adsorbed CO molecules (the so-called Langmuir-Hinshelwood mechanism) dominate.

cond-mat.mtrl-sci↗

arXiv1996

Mechanism of efficient carbon monoxide oxidation at Ru(0001)

We performed density-functional theory calculations using the generalized gradient approximation for the exhange-correlation functional to investigate the unusual catalytic behavior of Ru under elevated gas pressure conditions for the carbon monoxide oxidation reaction, which includes a particularly high CO_2 turnover. Our calculations indicate that a full monolayer of adsorbed oxygen actuates the high rate, enabling CO_2 formation via both scattering of gas-phase CO molecules as well as by CO molecules adsorbed at oxygen vacancies in the adlayer, where the latter mechanism is expected to be very efficient due to the relatively weak adsorption energy of both CO and O, as well as the close proximity of these reactants. In the present paper we analyse the bonding and electronic properties associated with the reaction pathway for CO_2 production via the scattering reaction. We find that the identified ``bent'' transition state is due to electron transfer into the unoccupied 2 pi orbitals of the CO molecule which reduces the Pauli repulsion between the impinging CO and the O-covered surface. Bond formation to CO_2 then proceeds by electron transfer back from the CO 2 pi orbitals into the bonding region between CO and the adsorbed O atom.

cond-mat.mtrl-sci↗

arXiv1996

Study of CO Oxidation over Ru(0001) at High Gas Pressures

Experiments performed at high gas partial pressures have demonstrated that the kinetics of the CO oxidation reaction at Ru(0001) is different and somewhat anomalous compared to that over other transition metal surfaces and, in particular, the turnover rate is exceptionally high. In order to gain insight into the underlying reasons for this behavior, we performed density functional theory calculations using the generalized gradient approximation for the exchange-correlation functional. We find that the high rate is due to a weakly, but nevertheless well bound, (1x1) oxygen adsorbate layer which may form for high O_2 pressures but not under usual ultra high vacuum conditions. The calculations indicate that reaction to CO_2 occurs both via scattering of gas-phase CO molecules as well as by CO molecules weakly adsorbed at vacancies in the oxygen adlayer, where the latter mechanism dominates the rate.

cond-mat↗

arXiv1996

Structure and stability of a high-coverage (1x1) oxygen phase on Ru(0001)

The formation of chemisorbed O-phases on Ru(0001) by exposure to O_2 at low pressures is apparently limited to coverages Theta <= 0.5. Using low-energy electron diffraction and density functional theory we show that this restriction is caused by kinetic hindering and that a dense O overlayer (Theta = 1) can be formed with a (1x1) periodicity. The structural and energetic properties of this new adsorbate phase are analyzed and discussed in view of attempts to bridge the so-called "pressure gap" in heterogeneous catalysis. It is argued that the identified system actuates the unusually high rate of oxidizing reactions at Ru surfaces under high oxygen pressure conditions.

mtrl-th↗

arXiv1995

Theory of alkali metal adsorption on close-packed metal surfaces

Results of recent density functional theory calculations for alkali metal adsorbates on close-packed metal surfaces are discussed. Single adatoms on the (111) surface of Al and Cu are studied with the self-consistent surface Green-function method by which the pure adsorbate-substrate interaction may be analyzed. Higher coverage ordered adlayers of K on Al(111), Na on Al(111), and Na on Al(001) are treated using the ab-initio pseudopotential plane wave method which affords the prediction of coverage dependent stable and metastable adsorbate geometries and phase transitions of the adsorbate layers. Together, these studies give insight and understanding into current key issues in alkali metal adsorption, namely, the nature of the adsorbate-substrate bond at low coverage and the occurrence of hitherto unanticipated adsorbate geometries, and the associated electronic properties.

mtrl-th↗