arXiv subjects

C. Thornton

Publications and source records attributed to C. Thornton.

7 recordsLinked to original sources

arXiv2024

The Next Generation of MeV Energy X-ray Sources for use in the Inspection of Additively Manufactured Parts for Industry

For the first time, we demonstrate the application of an inverse Compton scattering X-ray Source, driven by a laser-plasma accelerator, to image an additively manufactured component. X-rays with a mean energy of 380 keV were produced and used to image an additively manufactured part made of an Inconel (Nickel 718) alloy. Because inverse Compton scattering driven by laser-plasma acceleration produces high-energy X-rays while maintaining a focal spot size on the order of a micron, the source can provide several benefits over conventional X-ray production methods, particularly when imaging superalloy parts, with the potential to revolutionise what can be inspected.

physics.acc-ph↗

arXiv2023

Measurement of the decay of laser-driven linear plasma wakefields

We present the first measurements of the temporal decay rate of one-dimensional, linear Langmuir waves excited by an ultra-short laser pulse. Langmuir waves with relative amplitudes of approximately $6\%$ were driven by $1.7$ J, $50$ fs laser pulses in hydrogen and deuterium plasmas of density $n_{e0} = 8.4 \times 10^{17}$ cm$^{-3}$. The wakefield lifetimes were measured to be $\tau^\mathrm{H_2}_\mathrm{wf} = (9\pm2)$ ps and $\tau^\mathrm{D_2}_\mathrm{wf} = (16\pm8)$ ps respectively for hydrogen and deuterium. The experimental results were found to be in good agreement with 2D particle-in-cell simulations. In addition to being of fundamental interest, these results are particularly relevant to the development of laser wakefield accelerators (LWFAs) and wakefield acceleration schemes using multiple pulses, such as multi-pulse laser wakefield accelerators (MP-LWFAs).

physics.plasm-ph↗

arXiv2023

Extended X-ray absorption spectroscopy using an ultrashort pulse laboratory-scale laser-plasma accelerator

Laser-driven compact particle accelerators can provide ultrashort pulses of broadband X-rays, well suited for undertaking X-ray absorption spectroscopy measurements on a femtosecond timescale. Here the Extended X-ray Absorption Fine Structure (EXAFS) features of the K-edge of a copper sample have been observed over a 250 eV window in a single shot using a laser wakefield accelerator, providing information on both the electronic and ionic structure simultaneously. This unique capability will allow the investigation of ultrafast processes, and in particular, probing high-energy-density matter and physics far-from-equilibrium where the sample refresh rate is slow and shot number is limited. For example, states that replicate the tremendous pressures and temperatures of planetary bodies or the conditions inside nuclear fusion reactions. Using high-power lasers to pump these samples also has the advantage of being inherently synchronised to the laser-driven X-ray probe. A perspective on the additional strengths of a laboratory-based ultrafast X-ray absorption source is presented.

physics.plasm-ph↗

arXiv2020

Meter-Scale, Conditioned Hydrodynamic Optical-Field-Ionized Plasma Channels

We demonstrate through experiments and numerical simulations that low-density, low-loss, meter-scale plasma channels can be generated by employing a conditioning laser pulse to ionize the neutral gas collar surrounding a hydrodynamic optical-field-ionized (HOFI) plasma channel. We use particle-in-cell simulations to show that the leading edge of the conditioning pulse ionizes the neutral gas collar to generate a deep, low-loss plasma channel which guides the bulk of the conditioning pulse itself as well as any subsequently injected pulses. In proof-of-principle experiments we generate conditioned HOFI (CHOFI) waveguides with axial electron densities of $n_\mathrm{e0} \approx 1 \times 10^{17} \; \mathrm{cm^{-3}}$, and a matched spot size of $26 \; \mathrm{\mu m}$. The power attenuation length of these CHOFI channels is $L_\mathrm{att} = (21 \pm 3) \; \mathrm{m}$, more than two orders of magnitude longer than achieved by HOFI channels. Hydrodynamic and particle-in-cell simulations demonstrate that meter-scale CHOFI waveguides with attenuation lengths exceeding 1 m could be generated with a total laser pulse energy of only $1.2$ J per meter of channel. The properties of CHOFI channels are ideally suited to many applications in high-intensity light-matter interactions, including multi-GeV plasma accelerator stages operating at high pulse repetition rates.

physics.acc-ph↗

arXiv2020

Automation and control of laser wakefield accelerators using Bayesian optimisation

Laser wakefield accelerators promise to revolutionise many areas of accelerator science. However, one of the greatest challenges to their widespread adoption is the difficulty in control and optimisation of the accelerator outputs due to coupling between input parameters and the dynamic evolution of the accelerating structure. Here, we use machine learning techniques to automate a 100 MeV-scale accelerator, which optimised its outputs by simultaneously varying up to 6 parameters including the spectral and spatial phase of the laser and the plasma density and length. Most notably, the model built by the algorithm enabled optimisation of the laser evolution that might otherwise have been missed in single-variable scans. Subtle tuning of the laser pulse shape caused an 80% increase in electron beam charge, despite the pulse length changing by just 1%.

physics.acc-ph↗

arXiv2019

Low-Density Hydrodynamic Optical-Field-Ionized Plasma Channels Generated With An Axicon Lens

We demonstrate optical guiding of high-intensity laser pulses in long, low density hydrodynamic optical-field-ionized (HOFI) plasma channels. An axicon lens is used to generate HOFI plasma channels with on-axis electron densities as low as $n_e(0) = 1.5\times 10^{17}\, \mathrm{cm}^{-3}$ and matched spot sizes in the range $ 20 μ\mathrm{m} \lesssim W_M \lesssim 40 μ\mathrm{m}$. Control of these channel parameters via adjustment of the initial cell pressure and the delay after the arrival of the channel-forming pulse is demonstrated. For laser pulses with a peak axial intensity of $4 \times 10^{17}\, \mathrm{W\,cm}^{-2}$, highly reproducible, high-quality guiding over more than 14 Rayleigh ranges is achieved at a pulse repetition rate of 5 Hz, limited by the available channel-forming laser and vacuum pumping system. Plasma channels of this type would seem to be well suited to multi-GeV laser wakefield accelerators operating in the quasi-linear regime.

physics.plasm-ph↗

arXiv2018

Temporal Feedback Control of High-Intensity Laser Pulses to Optimize Ultrafast Heating of Atomic Clusters

We describe how active feedback routines can be applied at limited repetition rate (5 Hz) to optimize high-power $>10$ TW) laser interactions with clustered gases. Optimization of x-ray production from an argon cluster jet, using a genetic algorithm, approximately doubled the measured energy through temporal modification of the 150 mJ driving laser pulse. This approach achieved an increased radiation yield through exploration of a multi-dimensional parameter space, without requiring detailed a priori knowledge of the complex cluster dynamics. The optimized laser pulses exhibited a slow rising edge to the intensity profile, which enhanced the laser energy coupling into the cluster medium, compared to the optimally compressed FWHM pulse (40 fs). Our work suggests that this technique can be more widely utilized for control of intense pulsed secondary radiation from petawatt-class laser systems.

physics.plasm-ph↗