arXiv subjects

C. Untiedt

Publications and source records attributed to C. Untiedt.

At least 19 recordsLinked to original sources

arXiv2026

Benchmarking Current-to-Voltage Amplifiers for Quantum Transport Measurements

Accurate electrical amplification is essential in molecular electronics for measuring conductance through atomic and molecular junctions, where currents often span several orders of magnitude. In this work, we present a systematic design and comparative analysis of four current-to-voltage ($I\text{--}V$) amplifier architectures: single-stage linear, series-linear, logarithmic, and multi-stage cascaded, specifically optimized for break junction (BJ) techniques, including scanning tunneling microscopy (STM-BJ) and mechanically controllable break junctions (MCBJ). Each configuration is evaluated based on sensitivity, noise performance, and dynamic range. Our results characterize the trade-offs between circuit complexity and noise, providing a robust framework and practical guidelines for selecting amplification schemes in quantum transport experiments.

cond-mat.mes-hall↗

arXiv2025

Measurement of the Quantum Capacitance Between Two Metallic Electrodes

Two factors contribute to the electrical capacitance between two electrodes: a classical contribution, stemming from the electric field, and a quantum contribution, governed by the Pauli exclusion principle, which increases the difficulty of adding charge to the electrodes. In metals, the high electronic Density of States (DOS) at the Fermi energy allows the quantum contribution to be neglected, and a classical description of the electrical capacitance between two metallic electrodes is normally used. Here, we study the evolution of the capacitance as two metallic electrodes (Pt or Au) are approached to the limit when quantum corrections are needed, before contact formation. At small distances, we observe that the classical increase in capacitance turns into saturation as the electrodes are approached, reaching the quantum capacitance limit. Finally, a capacitance leakage due to quantum tunneling is observed. Since the quantum capacitance depends on the electronic DOS on the surface of the electrodes, we use it to probe the DOS change induced by molecular adsorption (Toluene) on the metallic surface.

cond-mat.mes-hall↗

arXiv2023

Evidence of an Off-resonant Electronic Transport Mechanism in Helicenes

Helical molecules have been identified as potential candidates for investigating electronic transport, spin filtering, or even piezoelectricity. However, the description of the transport mechanism is not straightforward in single molecular junctions. In this work, we study the electronic transport in break junctions of a series of three helical molecules: dithia[$n$]helicenes, with $n=7, 9, 11$ molecular units, and detail the synthesis of two kinds of dithia[11]helicenes, varying the location of the sulfur atoms. Our experimental study demonstrates low conductance values that remain similar across different biases and molecules. Additionally, we assess the length dependence of the conductance for each helicene, revealing an exponential decay characteristic of off-resonant transport. This behaviour is primarily attributed to the misalignment between the energy levels of the molecule-electrodes system. The length dependence trend described above is supported by \textit{ab initio} calculations, further confirming the off-resonant transport mechanism.

cond-mat.mes-hall↗

arXiv2023

Unraveling the Interplay between Quantum Transport and Geometrical Conformations in Monocyclic Hydrocarbons Molecular Junctions

In the field of molecular electronics, particularly in quantum transport studies, the orientation of molecules plays a crucial role. This orientation, with respect to the electrodes, can be defined through the cavity of ring-shaped monocyclic hydrocarbon molecules. In this manuscript, we unveil the geometrical conformation of these molecules when they are trapped between two atomically sharp electrodes through a combination of dynamic simulations, electronic transport calculations based on density functional theory, and break junction experiments under room conditions. Moreover, we present a novel criterion for determining the molecular orientation of benzene, toluene, (aromatic) and cyclohexane (aliphatic) solvents. Our findings for the identification of the molecular orientations on gold metal nanocontacts and their associated transport properties, can improve the understanding of molecular electronics using more complex cyclic hydrocarbons.

cond-mat.mtrl-sci↗

arXiv2019

Directional bonding explains high conductance values of atomic contacts in bcc metals

Atomic-sized junctions of iron, created by controlled rupture, present unusually high values of conductance compared to other metals. This result is counter-intuitive since, at the nanoscale, body-centered cubic metals are expected to exhibit lower coordination than face-centered cubic metals. In this work, classical molecular dynamics simulations of contact rupture, using an interatomic potential that accounts for directional bonding, yield highly-coordinated stable structures before rupture, unlike an isotropic bonding potential, which results in the expected stable single-atom contacts. Density functional theory electronic transport calculations show that conductance values of these highly coordinated and highly stable structures, can explain the experimentally measured values for conductance of body-centered cubic atomic contacts, thus revealing the important role of directional bonding in these metals.

cond-mat.mes-hall↗

arXiv2017

The role of first neighbors geometry in the electronic and mechanical properties of atomic contacts

We study in detail, by experimental measurements, atomistic simulations and DFT transport calculations, the process of formation and the resulting electronic properties of atomic-sized contacts made of Au, Ag and Cu. Our novel approaches to the data analysis of both experimental results and simulations, lead to a precise relationship between geometry and electronic transmission. We reestablish the significant influence of the number of first neighbors on the electronic properties of atomic-sized contacts. Our results allow us also to interpret subtle differences between the metals during the process of contact formation as well as the characteristics of the resulting contacts.

cond-mat.mes-hall↗

arXiv2017

Influence of relativistic effects on the contact formation of transition metals

Our analysis of the contact formation processes undergone by Au, Ag and Cu nanojunctions, reveals that the distance at which the two closest atoms on a pair of opposing electrodes jump into contact is, on average, two times longer for Au than either Ag or Cu. This suggests the existence of a longer range interaction between those two atoms in the case of Au, a result of the significant relativistic energy contributions to the electronic structure of this metal, as confirmed by ab initio calculations. Once in the contact regime, the differences between Au, Ag and Cu are subtle, and the conductance of single-atom contacts for metals of similar chemical valence is mostly determined by geometry and coordination.

cond-mat.mes-hall↗

arXiv2016

Electronic Transport in Gadolinium Atomic-Size Contacts

We report on the fabrication, transport measurements, and density functional theory (DFT) calculations of atomic size contacts made out of gadolinium (Gd). Gd is known to have local moments mainly associated with $f$ electrons. These coexist with itinerant $s$ and $d$ bands that account for its metallic character. Here we explore whether and how the local moments influence electronic transport properties at the atomic scale. Using both Scanning Tunneling Microscope (STM) and lithographic Mechanically Controllable Break Junction (MCBJ) techniques under cryogenic conditions, we study the conductance of Gd when only few atoms form the junction between bulk electrodes made out of the very same material. Thousands of measurements shows that Gd has an average lowest conductance, attributed to an atom-size contact, below $\frac{2e^2}{h}$. Our DFT calculations for monostrand chains anticipate that the $f$ bands are fully spin polarized and insulating, and that the conduction may be dominated by $s$, $p$, and $d$ bands. DFT quantum transport calculations quantitatively reproduce the experimental results for zero bias and reveal that, while $s-p$ bands are dominant for transport, $d$ orbitals seem to have a relevant contribution in some cases.

cond-mat.mes-hall↗

arXiv2016

Local electroexfoliation of graphene with a STM tip

Graphite surfaces can be manipulated by several methods to create graphene structures of different shapes and sizes. Scanning tunneling microscopy (STM) can be used to create these structures either through mechanical contact between the tip and the surface or through electro-exfoliation. In the latter, the mechanisms involved in the process of exfoliation with an applied voltage are not fully understood. Here we show how a graphite surface can be locally exfoliated in a systematic manner by applying an electrostatic force with a STM tip at the edge of a terrace, forming triangular flakes several nanometers in length. We demonstrate, through experiments and simulations, how these flakes are created by a two-step process: first a voltage ramp must be applied at the edge of the terrace, and then the tip must be scanned perpendicularly to the edge. Ab-initio electrostatic calculations reveal that the presence of charges on the graphite surface weakens the interaction between layers allowing for exfoliation at voltages in the same range as those used experimentally. Molecular dynamics simulations show that a force applied locally on the edge of a step produces triangular flakes such as those observed under STM. Our results provide new insights towards surface modification that can be extended to other layered materials.

cond-mat.mes-hall↗

arXiv2015

Modeling contact formation between atomic-sized gold tips via molecular dynamics

The formation and rupture of atomic-sized contacts is modelled by means of molecular dynamics simulations. Such nano-contacts are realized in scanning tunnelling microscope and mechanically controlled break junction experiments. These instruments routinely measure the conductance across the nano-sized electrodes as they are brought into contact and separated, permitting conductance traces to be recorded that are plots of conductance versus the distance between the electrodes. One interesting feature of the conductance traces is that for some metals and geometric configurations a jump in the value of the conductance is observed right before contact between the electrodes, a phenomenon known as jump-to-contact. This paper considers, from a computational point of view, the dynamics of contact between two gold nano-electrodes. Repeated indentation of the two surfaces on each other is performed in two crystallographic orientations of face-centred cubic gold, namely (001) and (111). Ultimately, the intention is to identify the structures at the atomic level at the moment of first contact between the surfaces, since the value of the conductance is related to the minimum cross-section in the contact region. Conductance values obtained in this way are determined using first principles electronic transport calculations, with atomic configurations taken from the molecular dynamics simulations serving as input structures.

cond-mat.mes-hall↗

arXiv2013

Understanding the structure of the first atomic contact in Gold

We have studied experimentally the phenomena of jump-to-contact (JC) and jump-out-of-contact (JOC) in gold electrodes. JC can be observed at the first contact when the two metals approach each other while JOC occurs in the last contact before breaking. When the indentation depth between the electrodes is limited to a certain value of conductance, a highly reproducible behaviour in the evolution of the conductance can be obtained for hundreds of cycles of formation and rupture. Molecular dynamics simulations of this process show how the two metallic electrodes are shaped into tips of a well-defined crystallographic structure formed through a mechanical annealing mechanism. We report a detailed analysis of the atomic configurations obtained before contact and rupture of these stable structures and obtained their conductance using first-principlesquantum transport calculations. These results help us understand the values of conductance obtained experimentally in the JC and JOC phenomena and improve our understanding of atomic-sized contacts and the evolution of their structural characteristics.

cond-mat.mes-hall↗

arXiv2013

Topologically protected quantum transport in locally exfoliated bismuth at room temperature

We report electrical conductance measurements of Bi nanocontacts created by repeated tip-surface indentation using a scanning tunneling microscope at temperatures of 4 K and 300 K. As a function of the elongation of the nanocontact we measure robust, tens of nanometers long plateaus of conductance G0 = 2e^2/h at room temperature. This observation can be accounted for by the mechanical exfoliation of a Bi(111) bilayer, a predicted QSH insulator, in the retracing process following a tip-surface contact. The formation of the bilayer is further supported by the additional observation of conductance steps below G0 before break-up at both temperatures. Our finding provides the first experimental evidence of the possibility of mechanical exfoliation of Bi bilayers, of the existence of the QSH phase in a two-dimensional crystal, and, most importantly, of the observation of the QSH phase at room temperature.

cond-mat.mes-hall↗

arXiv2013

Comparing the distribution of the electronic gap of an organic molecule with its photoluminescence spectrum

The electronic gap structure the organic molecule N,N'-diphenyl-N,N'-bis(3-methylphenyl)-(1,1'-biphenyl)-4,4'-diamine, or TPD, has been studied by means of a Scanning Tunneling Microscope (STM) operated under ambient conditions, and by Photoluminescence (PL) analysis. Thousands of current-voltage characteristics have been measured at different spots of the sample showing the typical behavior of a semiconductor. The analysis of the curves allows us to construct a gap distribution histogram which reassembles the PL spectrum of this compound. Our analysis shows that in the TPD films most of the observed distribution of the gap comes mainly from an uncertainty in the position of the LUMO levels of the molecular compound as would be expected from theory. This analysis demonstrates that STM can give relevant information, not only related to the expected value of a semiconductor gap, but also on its distribution which affects its physical properties such as the case of the PL and absorption distributions as here is reported.

cond-mat.mes-hall↗

arXiv2012

Mechanical annealing of metallic electrodes at the atomic scale

The process of creating an atomically defined and robust metallic tip is described and quantified using measurements of contact conductance between gold electrodes and numerical simulations. Our experiments show how the same conductance behavior can be obtained for hundreds of cycles of formation and rupture of the nanocontact by limiting the indentation depth between the two electrodes up to a conductance value of approximately $5G_{0}$ in the case of gold. This phenomenon is rationalized using molecular dynamics simulations together with density functional theory transport calculations which show how, after repeated indentations (mechanical annealing), the two metallic electrodes are shaped into tips of reproducible structure. These results provide a crucial insight into fundamental aspects relevant to nano-tribology or scanning probe microscopies.

cond-mat.mtrl-sci↗

arXiv2009

The molecular signature of highly conductive metal-molecule-metal junctions

The simplicity of single-molecule junctions based on direct bonding of a small molecule between two metallic electrodes make them an ideal system for the study of fundamental questions related to molecular electronics. Here we study the conductance properties of six different molecules suspended between Pt electrodes. All the molecular junctions show a typical conductance of about 1G0 which is ascribed to the dominant role of the Pt contacts. However, despite the metallic-like conductivity, the individual molecular signature is well-expressed by the effect of molecular vibrations in the inelastic contribution to the conductance.

cond-mat.mes-hall↗

arXiv2009

Formation of Atomic-Sized Contacts by Electrochemical Methods

Electrochemical methods have recently become an interesting tool for fabricating and characterizing nanostructures at room temperature. Simplicity, low cost and reversibility are some of the advantages of this technique that allows to work at the nanoscale without requiring sophisticated instrumentation. In our experimental setup, we measure the conductance across a nanocontact fabricated either by dissolving a macroscopic gold wire or by depositing gold in between two separated gold electrodes. We have achieved a high level of control on the electrochemical fabrication of atomic-sized contacts in gold. The use of electrochemistry as a reproducible technique to prepare nanocontacts will open several possibilities that are not feasible with other methodologies. It involves, also, the possibility of reproducing experiments that today are made by more expensive, complicated or irreversible methods. As example, we show here a comparison of the results when looking for shell effects in gold nanocontacts with those obtained by other techniques.

cond-mat.mes-hall↗

arXiv2009

The Kondo effect in ferromagnetic atomic contacts

Iron, cobalt and nickel are archetypal ferromagnetic metals. In bulk, electronic conduction in these materials takes place mainly through the $s$ and $p$ electrons, whereas the magnetic moments are mostly in the narrow $d$-electron bands, where they tend to align. This general picture may change at the nanoscale because electrons at the surfaces of materials experience interactions that differ from those in the bulk. Here we show direct evidence for such changes: electronic transport in atomic-scale contacts of pure ferromagnets (iron, cobalt and nickel), despite their strong bulk ferromagnetism, unexpectedly reveal Kondo physics, that is, the screening of local magnetic moments by the conduction electrons below a characteristic temperature. The Kondo effect creates a sharp resonance at the Fermi energy, affecting the electrical properties of the system;this appears as a Fano-Kondo resonance in the conductance characteristics as observed in other artificial nanostructures. The study of hundreds of contacts shows material-dependent lognormal distributions of the resonance width that arise naturally from Kondo theory. These resonances broaden and disappear with increasing temperature, also as in standard Kondo systems. Our observations, supported by calculations, imply that coordination changes can significantly modify magnetism at the nanoscale. Therefore, in addition to standard micromagnetic physics, strong electronic correlations along with atomic-scale geometry need to be considered when investigating the magnetic properties of magnetic nanostructures.

cond-mat.str-el↗

arXiv2009

Mechanical, Electrical, and Magnetic Properties of Ni Nanocontacts

The dynamic deformation upon stretching of Ni nanowires as those formed with mechanically controllable break junctions or with a scanning tunneling microscope is studied both experimentally and theoretically. Molecular dynamics simulations of the breaking process are performed. In addition, and in order to compare with experiments, we also compute the transport properties in the last stages before failure using the first-principles implementation of Landauer's formalism included in our transport package ALACANT.

cond-mat.mes-hall↗