arXiv subjects

C. Wagner

Publications and source records attributed to C. Wagner.

At least 37 records · Page 2Linked to original sources

arXiv2013

Aggregation of Red Blood Cells: From Rouleaux to Clot Formation

Red blood cells are known to form aggregates in the form of rouleaux. This aggregation process is believed to be reversible, but there is still no full understanding on the binding mechanism. There are at least two competing models, based either on bridging or on depletion. We review recent experimental results on the single cell level and theoretical analyses of the depletion model and of the influence of the cell shape on the binding strength. Another important aggregation mechanism is caused by activation of platelets. This leads to clot formation which is life saving in the case of wound healing but also a major cause of death in the case of a thrombus induced stroke. We review historical and recent results on the participation of red blood cells in clot formation.

physics.bio-ph↗

arXiv2013

A nonlinear elastic instability in channel flows at low Reynolds numbers

It is presently believed that flows of viscoelastic polymer solutions in geometries such as a straight pipe or channel are linearly stable. Here we present experimental evidence that such flows can be nonlinearly unstable and can exhibit a subcritical bifurcation. Velocimetry measurements are performed in a long, straight micro-channel; flow disturbances are introduced at the entrance of the channel system by placing a variable number of obstacles. Above a critical flow rate and a critical size of the perturbation, a sudden onset of large velocity fluctuations indicates presence of a nonlinear subcritical instability. Together with the previous observations of hydrodynamic instabilities in curved geometries, our results suggest that any flow of polymer solutions becomes unstable at sufficiently high flow rates.

physics.flu-dyn↗

arXiv2012

Visualization of the flow profile inside a thinning filament during capillary breakup of a polymer solution via particle image velocimetry (PIV) and particle tracking velocimetry (PTV)

We investigated the flow profile of a polymer solution in a thinning capillary bridge. Fluorescent tracer particles with a diameter of 3$μ$m were used to visualize the flow. The cylindrical shape of the filament introduced strong optical abberations that could be corrected for, and we were able to characterize the flow in filaments with a thickness ranging from 150 to 30 $μ$m. In the first regime when the filament was still sufficiently large, we used a PIV algorithm to deduce the flow field. At later stages when the number of particles in the observation plane decreased a PTV algorithm was used. The main two results of our measurements are as follows. First, the flow profile at the formation of the cylindrical filament is highly inhomogeneous and there is only flow in the outer parts of the filament. Second, we find that in most parts of the regime, where the temporal radius of the thinning filament can be fitted with an exponential law the flow indeed is purely extensional.

physics.flu-dyn↗

arXiv2012

The quest for companions to post-common envelope binaries. II. NSVS14256825 and HS0705+6700

We report new mid-eclipse times of the two close binaries NSVS14256825 and HS0705+6700, harboring an sdB primary and a low-mass main-sequence secondary. Both objects display clear variations in the measured orbital period, which can be explained by the action of a third object orbiting the binary. If this interpretation is correct, the third object in NSVS14256825 is a giant planet with a mass of roughly 12 M_Jup. For HS0705+6700, we provide evidence that strengthens the case for the suggested periodic nature of the eclipse time variation and reduces the uncertainties in the parameters of the brown dwarf implied by that model. The derived period is 8.4 yr and the mass is 31 M_Jup, if the orbit is coplanar with the binary. This research is part of the PlanetFinders project, an ongoing collaboration between professional astronomers and student groups at high schools.

astro-ph.SR↗

arXiv2010

Reducing sample variance: halo biasing, non-linearity and stochasticity

Comparing clustering of differently biased tracers of the dark matter distribution offers the opportunity to reduce the cosmic variance error in the measurement of certain cosmological parameters. We develop a formalism that includes bias non-linearities and stochasticity. Our formalism is general enough that can be used to optimise survey design and tracers selection and optimally split (or combine) tracers to minimise the error on the cosmologically interesting quantities. Our approach generalises the one presented by McDonald & Seljak (2009) of circumventing sample variance in the measurement of $f\equiv d \ln D/d\ln a$. We analyse how the bias, the noise, the non-linearity and stochasticity affect the measurements of $Df$ and explore in which signal-to-noise regime it is significantly advantageous to split a galaxy sample in two differently-biased tracers. We use N-body simulations to find realistic values for the parameters describing the bias properties of dark matter haloes of different masses and their number density. We find that, even if dark matter haloes could be used as tracers and selected in an idealised way, for realistic haloes, the sample variance limit can be reduced only by up to a factor $σ_{2tr}/σ_{1tr}\simeq 0.6$. This would still correspond to the gain from a three times larger survey volume if the two tracers were not to be split. Before any practical application one should bear in mind that these findings apply to dark matter haloes as tracers, while realistic surveys would select galaxies: the galaxy-host halo relation is likely to introduce extra stochasticity, which may reduce the gain further.

astro-ph.CO↗

arXiv2010

Imaging Pauli repulsion in scanning tunneling microscopy

A scanning tunneling microscope (STM) has been equipped with a nanoscale force sensor and signal transducer composed of a single D2 molecule that is confined in the STM junction. The uncalibrated sensor is used to obtain ultra-high geometric image resolution of a complex organic molecule adsorbed on a noble metal surface. By means of conductance-distance spectroscopy and corresponding density functional calculations the mechanism of the sensor/transducer is identified. It probes the short-range Pauli repulsion and converts this signal into variations of the junction conductance.

cond-mat.mes-hall↗

arXiv2009

Resolving chemical structures in scanning tunnelling microscopy

With the invention of scanning probe techniques, direct imaging of single atoms and molecules became possible. Today, scanning tunnelling microscopy (STM) routinely provides angstrom-scale image resolution. At the same time, however, STM images suffer from a serious drawback - the absence of chemical information. Here we demonstrate a modification of STM that resolves the chemical structure of molecular adsorbates. The key to the new STM mode is a combined force sensor and signal transducer that is formed within the tunnelling junction when a suitable gas condenses there. The method probes the repulsive branch of the surface adsorption potential and transforms the force signal into a current. Obtained images achieve the same resolution as state-of-the-art atomic force microscopy (AFM). In contrast to AFM, however, our (uncalibrated) force sensor is of nanoscale dimensions and therefore intrinsically insensitive to those long-range interactions that make atomic-resolution AFM so demanding.

cond-mat.mes-hall↗

arXiv2009

Viscoelastic surface instabilities

We review three different types of viscoelastic surface instabilities: The Rayleigh -- Plateau, the Saffman -- Taylor and the Faraday instability. These instabilities are classical examples of hydrodynamic surface instabilities. The addition of a small amount of polymers to pure water can alter its flow behavior drastically and the type of instability may change not only quantitatively but also qualitatively. We will show that some of the observed new phenomena can be explained by the use of simple rheological models that contain most of the underlying physical mechanisms leading to the instability. A quantitative description however is often only possible close to the onset of the instability or for weak deviations from Newtonian behavior. A complete theoretical description is still lacking when the system is driven far from equilibrium or for fluids with strong non-Newtonian behavior.

physics.flu-dyn↗

arXiv2009

Is there a Relationship between the Elongational Viscosity and the First Normal Stress Difference in Polymer Solutions?

We investigate a variety of different polymer solutions in shear and elongational flow. The shear flow is created in the cone-plate-geometry of a commercial rheometer. We use capillary thinning of a filament that is formed by a polymer solution in the Capillary Breakup Extensional Rheometer (CaBER) as an elongational flow. We compare the relaxation time and the elongational viscosity measured in the CaBER with the first normal stress difference and the relaxation time that we measured in our rheometer. All of these four quantities depend on different fluid parameters - the viscosity of the polymer solution, the polymer concentration within the solution, and the molecular weight of the polymers - and on the shear rate (in the shear flow measurements). Nevertheless, we find that the first normal stress coefficient depends quadratically on the CaBER relaxation time. A simple model is presented that explains this relation.

cond-mat.soft↗

arXiv2007

Blistering of viscoelastic filaments

When a dilute polymer solution experiences capillary thinning, it forms an almost uniformly cylindrical thread, which we study experimentally. In the last stages of thinning, when polymers have become fully stretched, the filament becomes prone to instabilities, of which we describe two: A novel "breathing" instability, originating from the edge of the filament, and a sinusoidal instability in the interior, which ultimately gives rise to a "blistering" pattern of beads on the filament. We describe the linear instability with a spatial resolution of 80 nm in the disturbance amplitude. For sufficiently high polymer concentrations, the filament eventually separates out into a "solid" phase of entangled polymers, connected by fluid beads. A solid polymer fiber of about 100 nanometer thickness remains, which is essentially permanent.

physics.flu-dyn↗

arXiv2006

Molecular configurations in a droplet detachment process of a complex liquid

We studied the microscopic polymer conformations in the droplet detachment process of an elastic semi-dilute polyelectrolytic Xanthan solution by measuring the instantaneous birefringence. As in earlier studies, we observe the suppression of the finite time singularity of the pinch-off process and the occurrence of an elastic filament. Our microscopic measurements reveal that the relatively stiff Xanthan molecules are already significantly pre-stretched to about 90 % of their final extension at the moment the filament appears. At later stages of the detachment process, we find evidence of a concentration enhancement due to the elongational flow.

physics.flu-dyn↗

arXiv2006

Tevatron-for-LHC Report: Preparations for Discoveries

This is the "TeV4LHC" report of the "Physics Landscapes" Working Group, focused on facilitating the start-up of physics explorations at the LHC by using the experience gained at the Tevatron. We present experimental and theoretical results that can be employed to probe various scenarios for physics beyond the Standard Model.

hep-ph↗

arXiv2006

The MareNostrum Universe

The MareNostrum Universe is one of the biggest SPH cosmological simulations done so far. It contains more than 2 billion particles (2 times 1024^3) in a 500 Mpc/h cubic volume. This simulation has been performed on the MareNostrum supercomputer at the Barcelona Supercomputer Center. We have obtained more than 0.5 million halos with masses greater than a typical Milky Way galaxy halo. We report results about the halo mass function, the shapes of dark matter and gas distributions in halos, the baryonic fraction in galaxy clusters and groups, baryon oscillations in the dark matter and the halo power spectra as well as the distribution and evolution of the gas fraction at large scales.

astro-ph↗

arXiv2006

Toward High Precision Higgs-Boson Measurements at the International Linear e+e- Collider

This report reviews the properties of Higgs bosons in the Standard Model (SM) and its various extensions. We give an extensive overview about the potential of the ILC operated at centre-of-mass energies up to 1 TeV (including the gamma gamma option) for the determination of the Higgs boson properties. This comprises the measurement of the Higgs boson mass, its couplings to SM fermions and gauge bosons, and the determination of the spin and the CP quantum numbers of the Higgs. The extensions of the SM that are analyzed in more detail are heavy SM-like Higgs bosons, heavy Higgs bosons in the framework of Supersymmetry (SUSY) and further exotic scenarios. We review recent theoretical developments in the field of Higgs boson physics. The important question what the ILC can contribute to Higgs boson physics after the LHC, the LHC/ILC interplay and synergy is discussed. The impact of Higgs boson physics on cosmology in several SUSY frameworks is analyzed. The impact of the accelerator and dector performance on the precision of measurements are discussed in detail. We propose a strategy to optimize future analyses. Open questions arising for the various topics are listed, further topics of study and corresponding roadmaps are suggested.

hep-ph↗

arXiv2005

Delay of Disorder by Diluted Polymers

We study the effect of diluted flexible polymers on a disordered capillary wave state. The waves are generated at an interface of a dyed water sugar solution and a low viscous silicon oil. This allows for a quantitative measurement of the spatio-temporal Fourier spectrum. The primary pattern after the first bifurcation from the flat interface are squares. With increasing driving strength we observe a melting of the square pattern. It is replaced by a weak turbulent cascade. The addition of a small amount of polymers to the water layer does not affect the critical acceleration but shifts the disorder transition to higher driving strenghs and the short wave length - high frequency fluctuations are suppressed.

physics.flu-dyn↗

arXiv2005

Spatio temporal characterization of interfacial Faraday waves: A new absorption technique

We present measurements of the complete spatio-temporal Fourier spectrum of Faraday waves. The Faraday waves are generated at the interface of two immiscible index matched liquids of different density. By use of a new absorption technique we are able to determine the bifurcation scenario from the flat surface to the patterned state for each complex spatial and temporal Fourier component separately. The measured surface spectra at onset are in good agreement with the predictions from a linear stability analysis. For the nonlinear state our measurements show in a direct manner how energy is transferred from lower to higher harmonics and we quantify the nonlinear coupling coefficients. Furthermore we find that the nonlinear coupling generates constant components in the spatial Fourier spectrum leading to a contribution of a non oscillating permanent sinusoidal deformed surface state. A comparison of a hexagonal and a rectangular pattern reveals that spatial resonances only can give rise to a spectrum that violates the temporal resonance conditions given by the weakly nonlinear theory.

nlin.PS↗

arXiv2004

Droplet detachment and bead formation in visco-elastic fluids

The presence of a very small amount of high molecular weight polymer significantly delays the pinch-off singularity of a drop of water falling from a faucet, and leads to the formation of a long-lived cylindrical filament. In this paper we present experiments, numerical simulations, and theory which examines the pinch-off process in the presence of polymers. The numerical simulations are found to be in excellent agreement with experiment. As a test case, we establish the conditions under which a small bead remains on the filament; we find that this is due to the asymmetry induced by the self-similar pinch-off of the droplet.

cond-mat.soft↗

arXiv2002

An intrinsic route to melt fracture in polymer extrusion: a weakly nonlinear subcritical instability of viscoelastic Poiseuille flow

As is well known, the extrusion rate of polymers from a cylindrical tube or slit (a ``die'') is in practice limited by the appearance of ``melt fracture'' instabilities which give rise to unwanted distortions or even fracture of the extrudate. We present the results of a weakly nonlinear analysis which gives evidence for an intrinsic generic route to melt fracture via a weakly nonlinear subcritical instability of viscoelastic Poiseuille flow. This instability and the onset of associated melt fracture phenomena appear at a fixed ratio of the elastic stresses to viscous stresses of the polymer solutionte

cond-mat.soft↗