arXiv subjects

Cagdas D. Onal

Publications and source records attributed to Cagdas D. Onal.

6 recordsLinked to original sources

arXiv2026

Multi-Modal Non-Prehensile Estimation of Physical Parameters via Press-and-Pull Tipping

Recovering physical properties of unknown objects through non-prehensile interaction is challenging because no single manipulation primitive reveals all relevant parameters. Planar pushing couples mass and friction, while conventional tipping cannot recover friction and may fail entirely when low-friction or curved-base objects slide or rotate instead of tipping. We introduce a multi-modal estimation framework that combines a sliding interaction with a press-and-pull tipping primitive to recover object mass, center of mass height, and surface friction. The press-and-pull interaction increases the object-table sliding threshold and stabilizes the pivot, enabling controlled tipping without any prior geometric object model. Wrist force/torque sensing, RGB-D perception, and robot proprioception are fused to estimate the physical parameters from the two complementary interaction modes. Experiments on an ABB IRB120 across four objects with varied geometry, mass, center of mass, and friction achieve low relative error, while successfully operating on curved-base objects that fail under conventional forward tipping. The results demonstrate that complementary non-prehensile interactions can recover a compact set of physical parameters without grasping, a prior object model, or learned interaction dynamics.

cs.RO↗

arXiv2026

Before the Tipping Point: Force-Guided Active Perception for Shape-Agnostic Estimation of 3D Centers of Mass

Estimating the 3D center of mass of unknown objects is challenging when grasping is infeasible, geometry is irregular, or mass distribution is uneven. We present a force-based method that estimates CoM height and mass from a single sub-critical tipping experiment by a robot manipulator. The robot applies a quasistatic elevated push and retract motion, using force-angle measurements recorded during tipping to identify parameters from the object trajectory. Our proposed push-retract cycle mitigates frictional bias, enabling generalized fitting. We experimentally validate our method using a robot manipulator with a six-axis force torque sensor on varying types of objects without prior shape information and without specific models. We also propose a method to prevent toppling, keeping the object in a sub-critical tipping regime by leveraging a safety margin. In experimental studies, our method recovers mass, CoM height, and toppling angle with relative errors below 5.0 percent across all unknown objects. This work demonstrates reliable 3D inertial parameter estimation under proper safety thresholds in tipping. Our proposed method informs and enables reliable non-prehensile manipulation and robotic grasping of challenging objects that were previously infeasible.

cs.RO↗

arXiv2026

3D Shape Control of Extensible Multi-Section Soft Continuum Robots via Visual Servoing

In this paper, we propose a novel vision-based control algorithm for regulating the whole body shape of extensible multisection soft continuum manipulators. Contrary to existing vision-based control algorithms in the literature that regulate the robot's end effector pose, our proposed control algorithm regulates the robot's whole body configuration, enabling us to leverage its kinematic redundancy. Additionally, our model-based 2.5D shape visual servoing provides globally stable asymptotic convergence in the robot's 3D workspace compared to the closest works in the literature that report local minima. Unlike existing visual servoing algorithms in the literature, our approach does not require information from proprioceptive sensors, making it suitable for continuum manipulators without such capabilities. Instead, robot state is estimated from images acquired by an external camera that observes the robot's whole body shape and is also utilized to close the shape control loop. Traditionally, visual servoing schemes require an image of the robot at its reference pose to generate the reference features. In this work, we utilize an inverse kinematics solver to generate reference features for the desired robot configuration and do not require images of the robot at the reference. Experiments are performed on a multisection continuum manipulator demonstrating the controller's capability to regulate the robot's whole body shape while precisely positioning the robot's end effector. Results validate our controller's ability to regulate the shape of continuum robots while demonstrating a smooth transient response and a steady-state error within 1 mm. Proof-of-concept object manipulation experiments including stacking, pouring, and pulling tasks are performed to demonstrate our controller's applicability.

cs.RO↗

arXiv2023

Integrating Contact-aware Feedback CPG System for Learning-based Soft Snake Robot Locomotion Controllers

This paper aims to solve the contact-aware locomotion problem of a soft snake robot by developing bio-inspired contact-aware locomotion controllers. To provide effective contact information for the controllers, we develop a scale-covered sensor structure mimicking natural snakes' scale sensilla. In the design of the control framework, our core contribution is the development of a novel sensory feedback mechanism for the Matsuoka central pattern generator (CPG) network. This mechanism allows the Matsuoka CPG system to work like a "spinal cord" in the whole contact-aware control scheme, which simultaneously takes the stimuli including tonic input signals from the "brain" (a goal-tracking locomotion controller) and sensory feedback signals from the "reflex arc" (the contact reactive controller), and generates rhythmic signals to actuate the soft snake robot to slither through densely allocated obstacles. In the "reflex arc" design, we develop two distinctive types of reactive controllers -- 1) a reinforcement learning (RL) sensor regulator that learns to manipulate the sensory feedback inputs of the CPG system, and 2) a local reflexive sensor-CPG network that directly connects sensor readings and the CPG's feedback inputs in a specific topology. Combining with the locomotion controller and the Matsuoka CPG system, these two reactive controllers facilitate two different contact-aware locomotion control schemes. The two control schemes are tested and evaluated in both simulated and real soft snake robots, showing promising performance in the contact-aware locomotion tasks. The experimental results also validate the advantages of the modified Matsuoka CPG system with a new sensory feedback mechanism for bio-inspired robot controller design.

cs.RO↗

arXiv2022

Air-Releasable Soft Robots for Explosive Ordnance Disposal

The demining of landmines using drones is challenging; air-releasable payloads are typically non-intelligent (e.g., water balloons or explosives) and deploying them at even low altitudes (~6 meter) is inherently inaccurate due to complex deployment trajectories and constrained visual awareness by the drone pilot. Soft robotics offers a unique approach for aerial demining, namely due to the robust, low-cost, and lightweight designs of soft robots. Instead of non-intelligent payloads, here, we propose the use of air-releasable soft robots for demining. We developed a full system consisting of an unmanned aerial vehicle retrofitted to a soft robot carrier including a custom-made deployment mechanism, and an air-releasable, lightweight (296 g), untethered soft hybrid robot with integrated electronics that incorporates a new type of a vacuum-based flasher roller actuator system. We demonstrate a deployment cycle in which the drone drops the soft robotic hybrid from an altitude of 4.5 m meters and after which the robot approaches a dummy landmine. By deploying soft robots at points of interest, we can transition soft robotic technologies from the laboratory to real-world environments.

cs.RO↗

arXiv2021

From Hand-Perspective Visual Information to Grasp Type Probabilities: Deep Learning via Ranking Labels

Limb deficiency severely affects the daily lives of amputees and drives efforts to provide functional robotic prosthetic hands to compensate this deprivation. Convolutional neural network-based computer vision control of the prosthetic hand has received increased attention as a method to replace or complement physiological signals due to its reliability by training visual information to predict the hand gesture. Mounting a camera into the palm of a prosthetic hand is proved to be a promising approach to collect visual data. However, the grasp type labelled from the eye and hand perspective may differ as object shapes are not always symmetric. Thus, to represent this difference in a realistic way, we employed a dataset containing synchronous images from eye- and hand- view, where the hand-perspective images are used for training while the eye-view images are only for manual labelling. Electromyogram (EMG) activity and movement kinematics data from the upper arm are also collected for multi-modal information fusion in future work. Moreover, in order to include human-in-the-loop control and combine the computer vision with physiological signal inputs, instead of making absolute positive or negative predictions, we build a novel probabilistic classifier according to the Plackett-Luce model. To predict the probability distribution over grasps, we exploit the statistical model over label rankings to solve the permutation domain problems via a maximum likelihood estimation, utilizing the manually ranked lists of grasps as a new form of label. We indicate that the proposed model is applicable to the most popular and productive convolutional neural network frameworks.

cs.CV↗