arXiv subjects

Caijun Zhong

Publications and source records attributed to Caijun Zhong.

At least 55 records · Page 3Linked to original sources

arXiv2020

Covariance-Based Cooperative Activity Detection for Massive Grant-Free Random Access

This paper designs a cooperative activity detection framework for massive grant-free random access in the sixth-generation (6G) cell-free wireless networks based on the covariance of the received signals at the access points (APs). In particular, multiple APs cooperatively detect the device activity by only exchanging the low-dimensional intermediate local information with their neighbors. The cooperative activity detection problem is non-smooth and the unknown variables are coupled with each other for which conventional approaches are inapplicable. Therefore, this paper proposes a covariance-based algorithm by exploiting the sparsity-promoting and similarity-promoting terms of the device state vectors among neighboring APs. An approximate splitting approach is proposed based on the proximal gradient method for solving the formulated problem. Simulation results show that the proposed algorithm is efficient for large-scale activity detection problems while requires shorter pilot sequences compared with the state-of-art algorithms in achieving the same system performance.

cs.IT↗

arXiv2020

Intelligent Reflecting Surface Aided Multicasting with Random Passive Beamforming

In this letter, we consider a multicast system where a single-antenna transmitter sends a common message to multiple single-antenna users, aided by an intelligent reflecting surface (IRS) equipped with $N$ passive reflecting elements. Prior works on IRS have mostly assumed the availability of channel state information (CSI) for designing its passive beamforming. However, the acquisition of CSI requires substantial training overhead that increases with $N$. In contrast, we propose in this letter a novel \emph{random passive beamforming} scheme, where the IRS performs independent random reflection for $Q\geq 1$ times in each channel coherence interval without the need of CSI acquisition. For the proposed scheme, we first derive a closed-form approximation of the outage probability, based on which the optimal $Q$ with best outage performance can be efficiently obtained. Then, for the purpose of comparison, we derive a lower bound of the outage probability with traditional CSI-based passive beamforming. Numerical results show that a small $Q$ is preferred in the high-outage regime (or with high rate target) and the optimal $Q$ becomes larger as the outage probability decreases (or as the rate target decreases). Moreover, the proposed scheme significantly outperforms the CSI-based passive beamforming scheme with training overhead taken into consideration when $N$ and/or the number of users are large, thus offering a promising CSI-free alternative to existing CSI-based schemes.

eess.SP↗

arXiv2020

Robust Design for IRS-Aided Communication Systems with User Location Uncertainty

In this paper, we propose a robust design framework for IRS-aided communication systems in the presence of user location uncertainty. By jointly designing the transmit beamforming vector at the BS and phase shifts at the IRS, we aim to minimize the transmit power subject to the worse-case quality of service (QoS) constraint, i.e., ensuring the user rate is above a threshold for all possible user location error realizations. With unit-modulus, this problem is not convex. The location uncertainty in the QoS constraint further increases the difficulty of solving this problem. By utilizing techniques of Taylor expansion, S-Procedure and semidefinite relaxation (SDP), we transform this problem into a sequence of semidefinite programming (SDP) sub-problems. Simulation results show that the proposed robust algorithm substantially outperforms the non-robust algorithm proposed in the literature, in terms of probability of reaching the required QoS target.

cs.IT↗

arXiv2020

Location Information Aided Multiple Intelligent Reflecting Surface Systems

This paper proposes a novel location information aided multiple intelligent reflecting surface (IRS) systems. Assuming imperfect user location information, the effective angles from the IRS to the users are estimated, which is then used to design the transmit beam and IRS beam. Furthermore, closed-form expressions for the achievable rate are derived. The analytical findings indicate that the achievable rate can be improved by increasing the number of base station (BS) antennas or reflecting elements. Specifically, a power gain of order $N M^2$ is achieved, where $N$ is the antenna number and $M$ is the number of reflecting elements. Moreover, with a large number of reflecting elements, the individual signal to interference plus noise ratio (SINR) is proportional to $M$, while becomes proportional to $M^2$ as non-line-of-sight (NLOS) paths vanish. Also, it has been shown that high location uncertainty would significantly degrade the achievable rate. Besides, IRSs should be deployed at distinct directions (relative to the BS) and be far away from each other to reduce the interference from multiple IRSs. Finally, an optimal power allocation scheme has been proposed to improve the system performance.

cs.IT↗

arXiv2020

Statistical CSI based Design for Intelligent Reflecting Surface Assisted MISO Systems

This paper considers an intelligent reflecting surface (IRS) aided multiple-input single-output communication system, where statistical channel state information (CSI) is exploited for transmit beamforming and IRS beamforming. A tight upper bound is derived for the ergodic capacity of the system. Based on which, the joint optimization of transmit beam and IRS beam are studied. Depending on whether a line-of-sight path exists between the access point and user, two different cases, namely, Rician fading and Rayleigh fading, are separately treated. Specifically, for the Rician fading case, an iterative algorithm is proposed, which is guaranteed to converge. For the Rayleigh fading case, closed-form designs are obtained for the transmit beam and IRS beam. Simulation results show the proposed beamforming scheme achieves similar performance as the benchmark algorithm requiring instantaneous CSI.

cs.IT↗

arXiv2020

Robust Design for NOMA-based Multi-Beam LEO Satellite Internet of Things

In this paper, we investigate the issue of massive access in a beyond fifth-generation (B5G) multi-beam low earth orbit (LEO) satellite internet of things (IoT) network in the presence of channel phase uncertainty due to channel state information (CSI) conveyance from the devices to the satellite via the gateway. Rather than time division multiple access (TDMA) or frequency division multiple access (FDMA) with multi-color pattern, a new non-orthogonal multiple access (NOMA) scheme is adopted to support massive IoT distributed over a very wide range. Considering the limited energy on the LEO satellite, two robust beamforming algorithms against channel phase uncertainty are proposed for minimizing the total power consumption in the scenarios of noncritical IoT applications and critical IoT applications, respectively. Both thoeretical analysis and simulation results validate the effectiveness and robustness of the proposed algorithms for supporting massive access in satellite IoT.

cs.IT↗

arXiv2020

Deep Learning for Joint Channel Estimation and Signal Detection in OFDM Systems

In this paper, we propose a novel deep learning based approach for joint channel estimation and signal detection in orthogonal frequency division multiplexing (OFDM) systems by exploring the time and frequency correlation of wireless fading channels. Specifically, a Channel Estimation Network (CENet) is designed to replace the conventional interpolation procedure in pilot-aided estimation scheme. Then, based on the outcome of the CENet, a Channel Conditioned Recovery Network (CCRNet) is designed to recover the transmit signal. Experimental results demonstrate that CENet and CCRNet achieve superior performance compared with conventional estimation and detection methods. In addition, both networks are shown to be robust to the variation of parameter chances, which makes them appealing for practical implementation.

cs.IT↗

arXiv2020

Performance Analysis of Intelligent Reflecting Surface Aided Communication Systems

This letter presents a detailed performance analysis of the intelligent reflecting surface (IRS) aided single-input single-output communication systems, taking into account of the direct link between the transmitter and receiver. A closed-form upper bound is derived for the ergodic capacity, and an accurate approximation is obtained for the outage probability. In addition, simplified expressions are presented in the asymptotic regime. Numerical results are provided to validate the correctness of the theoretical analysis. It is found that increasing the number of reflecting elements can significantly boost the ergodic capacity and outage probability performance, and a strong line-of-sight component is also beneficial. In addition, it is desirable to deploy the IRS close to the transmitter or receiver, rather than in the middle.

cs.IT↗

arXiv2020

Deep Reinforcement Learning for Joint Beamwidth and Power Optimization in mmWave Systems

This paper studies the joint beamwidth and transmit power optimization problem in millimeter wave communication systems. A deep reinforcement learning based approach is proposed. Specifically, a customized deep Q network is trained offline, which is able to make real-time decisions when deployed online. Simulation results show that the proposed approach significantly outperforms conventional approaches in terms of both performance and complexity. Besides, strong generalization ability to different system parameters is also demonstrated, which further enhances the practicality of the proposed approach.

cs.IT↗

arXiv2020

Robust Design for Intelligent Reflecting Surfaces Assisted MISO Systems

In this work, we study the statistically robust beamforming design for an intelligent reflecting surfaces (IRS) assisted multiple-input single-output (MISO) wireless system under imperfect channel state information (CSI), where the channel estimation errors are assumed to be additive Gaussian. We aim at jointly optimizing the transmit/receive beamformers and IRS phase shifts to minimize the average mean squared error (MSE) at the user. In particular, to tackle the non-convex optimization problem, an efficient algorithm is developed by capitalizing on alternating optimization and majorization-minimization techniques. Simulation results show that the proposed scheme achieves robust MSE performance in the presence of CSI error, and substantially outperforms conventional non-robust methods.

cs.IT↗

arXiv2020

Sum Rate Optimization for Two Way Communications with Intelligent Reflecting Surface

In this letter, an intelligent reflecting surface (IRS) enhanced full-duplex MIMO two-way communication system is studied. The system sum rate is maximized through jointly optimizing the source precoders and the IRS phase shift matrix. Adopting the idea of Arimoto-Blahut algorithm, the non-convex optimization problem is decoupled into three sub-problems, which are solved alternatingly. All the sub-problems can be solved efficiently with closed-form solutions. In addition, practical IRS assumptions, e.g., discrete phase shift levels, are also considered. Numerical results verify the convergence and performance of the proposed scheme.

eess.SP↗

arXiv2020

Programmable Metasurface Based Multicast Systems: Design and Analysis

This paper considers a multi-antenna multicast system with programmable metasurface (PMS) based transmitter. Taking into account of the finite-resolution phase shifts of PMSs, a novel beam training approach is proposed, which achieves comparable performance as the exhaustive beam searching method but with much lower time overhead. Then, a closed-form expression for the achievable multicast rate is presented, which is valid for arbitrary system configurations. In addition, for certain asymptotic scenario, simple approximated expressions for the multicase rate are derived. Closed-form solutions are obtained for the optimal power allocation scheme, and it is shown that equal power allocation is optimal when the pilot power or the number of reflecting elements is sufficiently large. However, it is desirable to allocate more power to weaker users when there are a large number of RF chains. The analytical findings indicate that, with large pilot power, the multicast rate is determined by the weakest user. Also, increasing the number of radio frequency (RF) chains or reflecting elements can significantly improve the multicast rate, and as the phase shift number becomes larger, the multicast rate improves first and gradually converges to a limit. Moreover, increasing the number of users would significantly degrade the multicast rate, but this rate loss can be compensated by implementing a large number of reflecting elements.

cs.IT↗

arXiv2020

Joint Activity Detection and Channel Estimation for mmW/THz Wideband Massive Access

Millimeter-wave/Terahertz (mmW/THz) communications have shown great potential for wideband massive access in next-generation cellular internet of things (IoT) networks. To decrease the length of pilot sequences and the computational complexity in wideband massive access, this paper proposes a novel joint activity detection and channel estimation (JADCE) algorithm. Specifically, after formulating JADCE as a problem of recovering a simultaneously sparse-group and low rank matrix according to the characteristics of mmW/THz channel, we prove that jointly imposing $l_1$ norm and low rank on such a matrix can achieve a robust recovery under sufficient conditions, and verify that the number of measurements derived for the mmW/THz wideband massive access system is significantly smaller than currently known measurements bound derived for the conventional simultaneously sparse and low-rank recovery. Furthermore, we propose a multi-rank aware method by exploiting the quotient geometry of product of complex rank-$L$ matrices with the number of scattering clusters $L$. Theoretical analysis and simulation results confirm the superiority of the proposed algorithm in terms of computational complexity, detection error rate, and channel estimation accuracy.

cs.IT↗

arXiv2020

Unsupervised Learning for Passive Beamforming

Reconfigurable intelligent surface (RIS) has recently emerged as a promising candidate to improve the energy and spectral efficiency of wireless communication systems. However, the unit modulus constraint on the phase shift of reflecting elements makes the design of optimal passive beamforming solution a challenging issue. The conventional approach is to find a suboptimal solution using the semi-definite relaxation (SDR) technique, yet the resultant suboptimal iterative algorithm usually incurs high complexity, hence is not amenable for real-time implementation. Motivated by this, we propose a deep learning approach for passive beamforming design in RIS-assisted systems. In particular, a customized deep neural network is trained offline using the unsupervised learning mechanism, which is able to make real-time prediction when deployed online. Simulation results show that the proposed approach maintains most of the performance while significantly reduces computation complexity when compared with SDR-based approach.

cs.IT↗

arXiv2019

Deep Learning for Spectrum Sensing

In cognitive radio systems, the ability to accurately detect primary user's signal is essential to secondary user in order to utilize idle licensed spectrum. Conventional energy detector is a good choice for blind signal detection, while it suffers from the well-known SNR-wall due to noise uncertainty. In this letter, we firstly propose a deep learning based signal detector which exploits the underlying structural information of the modulated signals, and is shown to achieve the state of the art detection performance, requiring no prior knowledge about channel state information or background noise. In addition, the impacts of modulation scheme and sample length on performance are investigated. Finally, a deep learning based cooperative detection system is proposed, which is shown to provide substantial performance gain over conventional cooperative sensing methods.

cs.IT↗

arXiv2019

MmWave Communication With Active Ambient Perception

In existing communication systems, the channel state information of each UE (user equipment) should be repeatedly estimated when it moves to a new position or another UE takes its place. The underlying ambient information, including the specific layout of potential reflectors, which provides more detailed information about all UEs' channel structures, has not been fully explored and exploited. In this paper, we rethink the mmWave channel estimation problem in a new and indirect way, i.e., instead of estimating the resultant composite channel response at each time and for any specific location, we first conduct the ambient perception exploiting the fascinating radar capability of a mmWave antenna array and then accomplish the location-based sparse channel reconstruction. In this way, the sparse channel for a quasi-static UE arriving at a specific location can be rapidly synthesized based on the perceived ambient information, thus greatly reducing the signalling overhead and online computational complexity. Based on the reconstructed mmWave channel, single-beam mmWave communication is designed and evaluated which shows excellent performance. Such an approach in fact integrates radar with communication, which may possibly open a new paradigm for future communication system design.

eess.SP↗

arXiv2019

Design of Non-Orthogonal Beamspace Multiple Access for Cellular Internet-of-Things

In this paper, we study the problem of massive connections over limited radio spectrum for the cellular Internet-of-Things (IoT) in the fifth-generation (5G) wireless network. To address the challenging issues associated with channel state information (CSI) acquisition and beam design in the context of massive connections, we propose a new non-orthogonal beamspace multiple access framework. In particular, the user equipments (UEs) are non-orthogonal not only in the temporal-frequency domain, but also in the beam domain. We analyze the performance of the proposed non-orthogonal beamspace multiple access scheme, and derive an upper bound on the weighted sum rate in terms of channel conditions and system parameters. For further improving the performance, we propose three non-orthogonal transmit beam construction algorithms with different beamspace resolutions. Finally, extensive simulation results show that substantial performance gain can be obtained by the proposed non-orthogonal beamspace multiple access scheme over the baseline ones.

cs.IT↗

arXiv2018

Secrecy Outage Performance of Multi-antenna Wiretap Channels With Diversity Combinings Over Correlated Rayleigh Fading Channels

This paper presents a detailed secrecy outage performance analysis of correlated multi-antenna wiretap channels with three popular diversity combining schemes, namely maximal ratio combining, selection combining, and equal gain combining at the legitimate receiver. For single input multiple output wiretap channels, both exact and asymptotic expressions are derived for the secrecy outage probability (SOP) of these systems. The findings suggest that, compared with the scenario where all the channels are independent, correlation of the main channels alone increases the SOP by a factor of 1/ det(U), where det(U) is the determinant of correlation matrix U. In contrast, in the high signal-to-noise ratio regime at the legitimate receiver, correlation between the main channels and the eavesdropper channels has a positive effect on SOP. Moreover, for multiple input and multiple output wiretap channels, the SOP of two transmit antenna selection (TAS) schemes are analyzed for the considered correlated channel model. The SOP relationship of the both TAS schemes is quantified by the secrecy array gain. Finally, numerical simulations are conducted to corroborate the analytical results.

cs.IT↗