arXiv subjects

Can Ding

Publications and source records attributed to Can Ding.

3 recordsLinked to original sources

arXiv2025

A Tri-Band Shared-Aperture Base Station Antenna Array Covering 5G Mid-Band and 6G Centimetric Wave Band

This work proposes a tri-band shared-aperture antenna array with three wide bands, covering the 5G mid-band and the 6G centimetric band, which is a promising candidate for future 6G base station antennas. The challenge of suppressing interferences, including scattering and coupling, in the tri-band array is holistically addressed across wide bands. Guided by characteristic mode analysis (CMA), a segmented spiral radiator is efficiently developed to mitigate scattering and coupling at high frequencies while preserving radiation performance at low frequencies. Compared to a conventional tube radiator, the proposed spiral exhibits a reduced radar cross-section (RCS) over an ultra-wide range of 4.7-21.5 GHz (128.2%). With the aid of serial resonators, impedance matching of the segmented-spiral-based dipole antenna is achieved across the low band (LB) of 3.05-4.68 GHz (42.2%), spanning the 5G band 3.3-4.2 GHz. Moreover, suppressors are placed near the LB ports to further reduce the cross-band coupling. Middle band (MB) and high band (HB) antennas operate in 6.2-10.0 GHz (46.9%) and 10.0-15.6 GHz (43.8%), respectively, collectively covering the anticipated 5G-Advanced and 6G centimetric band of 6.425-15.35 GHz. Both the MB and HB antennas employ a planar magnetoelectric (ME) dipole structure, which prevents common-mode resonances in the LB and MB, and mitigates the scattering from the MB antenna in the HB. In this tri-band array, radiation patterns remain undistorted across the LB, MB, and HB, and the isolation between any two ports exceeds 20 dB over all three bands.

physics.app-ph↗

arXiv2025

A Wideband Tri-Band Shared-Aperture Antenna Array for 5G and 6G Applications

This work presents a wideband tri-band shared-aperture antenna array covering the 5G mid-band and 6G centimetric band. The challenge of scattering and coupling suppression is holistically addressed across the wide bands. Guided by characteristic mode analysis (CMA), a segmented spiral radiator is developed to mitigate high-frequency scattering and coupling while maintaining low-frequency radiation performance. Compared with a conventional tube radiator, the proposed spiral achieves a reduced radar cross-section (RCS) over 4.7-21.5 GHz (128.2%). With the aid of serial resonators, the segmented-spiral dipole achieves impedance matching in the low band (LB, 3.05-4.68 GHz, 42.2%), covering the 5G band (3.3-4.2 GHz), while additional suppressors further reduce cross-band coupling. The middle band (MB) and high band (HB) antennas operate at 6.2-10.0 GHz (46.9%) and 10.0-15.6 GHz (43.8%), respectively, collectively covering the anticipated 5G-Advanced and 6G bands (6.425-15.35 GHz). Both the MB and HB antennas employ a planar magnetoelectric (ME) dipole structure to avoid common-mode resonances within the LB and MB and to minimize cross-band scattering in the HB. The proposed array maintains undistorted radiation patterns and better than 20 dB port isolation between any two ports across all three bands.

physics.app-ph↗

arXiv2020

Spatial Wave Control Using a Self-biased Nonlinear Metasurface at Microwave Frequencies

Recently, the investigation of metasurface has been extended to wave control through exploiting nonlinearity. Among all of the ways to achieve tunable metasurfaces with multiplexed performances, nonlinearity is one of the promising choices. Although several proposals have been reported to obtain nonlinear architectures at visible frequencies, the area of incorporating nonlinearity in form of passive-designing at microwave metasurfaces is open for investigation. In this paper, a passive wideband nonlinear metasurface is manifested, which is composed of embedded L-shape and {\Gamma}-shape meta-atoms with PIN-diode elements. The proposed self-biased nonlinear metasurface has two operational states: at low power intensities, it acts as Quarter Wave Plate (QWP) in the frequency range from 13.24 GHz to 16.38 GHz with an Axial Ratio (AR) of over 21.2%. In contrast, at high power intensities, by using the polarization conversion property of the proposed PIN-diode based meta-atoms, the metasurface can act as a digital metasurface. It means that by arranging the meta-atoms with a certain coding pattern, the metasurface can manipulate the scattered beams and synthesize well-known patterns such as Diffusion-like pattern at an ultra-wide frequency range from 8.12 GHz to 19.27 GHz (BW=81.4%). Full-wave and nonlinear simulations are carried out to justify the performance of the wideband nonlinear metasurface. We expect the proposed self-biased nonlinear metasurface at microwave frequencies reveals excellent opportunities to design limiter metasurfaces and compact reconfigurable imaging systems.

physics.app-ph↗