arXiv subjects

Carl A. Whitfield

Publications and source records attributed to Carl A. Whitfield.

10 recordsLinked to original sources

arXiv2025

Viscoplasticity can stabilise liquid collar motion on vertical cylinders

Liquid films coating vertical cylinders can form annular liquid collars which translate downwards under gravity. We investigate the dynamics of a thin viscoplastic liquid film coating the interior or exterior of a vertical cylindrical tube, quantifying how the yield stress modifies both the Rayleigh-Plateau instability leading to collar formation and the translation of collars down the tube. We use thin-film theory to derive an evolution equation for the layer thickness, which we solve numerically to examine the nonlinear dynamics. Instability and collar formation occur when gravity is sufficiently strong to make the fluid yield initially. We use matched asymptotics to derive a model describing the quasi-steady translation of a slender liquid collar when the Bond number is small. The structure of the asymptotic solution for a viscoplastic collar shares some features with the Newtonian version, but there are several novel asymptotic regions that emerge at the two ends of the collar. The global force balance, which determines the collar's speed, is modified by a leading-order contribution from viscous drag in the collar when the liquid is viscoplastic. We use the asymptotic model to describe slow changes in collar volume when the film thicknesses ahead of, and behind, the collar are unequal. When the film thickness ahead of the collar is less than a critical value that we determine, viscoplastic collars adjust their volume and reach a steadily-translating state. This contrasts with the Newtonian problem, where the only state in which steady translation occurs is unstable to small changes in the film thickness.

physics.flu-dyn↗

arXiv2024

Using data collected from structured light plethysmography to differentiate breathing pattern disorder from normal breathing: A study group report

This report relates to a study group hosted by the EPSRC funded network, Integrating data-driven BIOphysical models into REspiratory MEdicine (BIOREME), and supported by SofTMech and Innovate UK, Business Connect. This report summarises the work undertaken on a challenge presented by two of the authors, Mathew Bulpett and Dr Emily Fraser. The aim was to identify approaches to analyse data collected using structured light plethysmography (SLP) from (n=31) healthy volunteers and (n=67) patients with Breathing Pattern Disorder (BPD) attributed to "long COVID", i.e. post-acute COVID-19 sequelae. This report explores several approaches including dimensionality reduction techniques on the available data and alternative indices extracted from variation in the time-series data for each measurement. Further proposals are also outlined such as different spatial indices that could be extracted from the SLP data, and the potential to couple to mechanical models of the lungs, chest and abdomen. However, running these latter analyses was beyond the scope of the limited study group timeframe. This exploratory analysis did not identify any clear SLP biomarkers of BPD in these cohorts, however recommendations are made for using SLP technologies in future BPD studies based on its findings.

physics.med-ph↗

arXiv2024

Non-local impact of distal airway constrictions on patterns of inhaled particle deposition

Airway constriction and blockage in obstructive lung diseases cause ventilation heterogeneity and create barriers to effective drug deposition. Established computational particle-deposition models have not accounted for these impacts of disease. We present a new particle-deposition model that calculates ventilation based on the resistance of each airway, such that ventilation responds to airway constriction. The model incorporates distal airway constrictions representative of cystic fibrosis, allowing us to investigate the resulting impact on patterns of deposition. Unlike previous models, our model predicts how constrictions affect deposition in airways throughout the lungs, not just in the constricted airways. Deposition is reduced in airways directly distal and proximal to constrictions. When constrictions are clustered together, central-airways deposition can increase significantly in regions away from constrictions, but distal-airways deposition in those regions remains largely unchanged. We use our model to calculate lung clearance index (LCI), a clinical measure of ventilation heterogeneity, after applying constrictions of varying severities in one lobe. We find an increase in LCI coinciding with significantly reduced deposition in the affected lobe. Our results show how the model provides a framework for development of computational tools that capture the impacts of airway disease, which could significantly affect predictions of regional dosing.

q-bio.TO↗

arXiv2024

Correction and standardisation of lung oscillometry techniques using parameter inference: A study group report

This report relates to a study group hosted by the EPSRC funded network, Integrating data-driven BIOphysical models into REspiratory MEdicine (BIOREME), and supported by The Insigneo Institute and The Knowledge Transfer Network. The BIOREME network hosts events, including this study group, to bring together multi-disciplinary researchers, clinicians, companies and charities to catalyse research in the applications of mathematical modelling for respiratory medicine. The goal of this study group was to provide an interface between companies, clinicians, and mathematicians to develop mathematical tools to the problems presented. The study group was held at The University of Sheffield on the 17 - 20 April 2023 and was attended by 24 researchers from 13 different institutions. This report relates to a challenge presented by Arete Medical Technologies relating to impulse oscillometry (IOS), whereby a short pressure oscillation is imposed at a person's mouth during normal breathing, usually by a loudspeaker. The resulting pressure and flow rate changes can be used to the impedance of the airways, which in turn can provide proxy measurements for (patho)physiological changes in the small airways. Disentangling the signal so that airway mechanics can be measured accurately (and device properties/environmental effects can be accounted for) remains an open challenge that has the potential to significantly improve the device and its translation to clinic. In this report, several approaches to this problem, and the wider problem of interpreting oscillometry resuts are explored.

physics.med-ph↗

arXiv2023

Surfactant amplifies yield-stress effects in the capillary instability of a film coating a tube

To assess how the presence of surfactant in lung airways alters the flow of mucus that leads to plug formation and airway closure, we investigate the effect of insoluble surfactant on the instability of a viscoplastic liquid coating the interior of a cylindrical tube. Evolution equations for the layer thickness using thin-film and long-wave approximations are derived that incorporate yield-stress effects and capillary and Marangoni forces. Using numerical simulations and asymptotic analysis of the thin-film system, we quantify how the presence of surfactant slows growth of the Rayleigh-Plateau instability, increases the size of initial perturbation required to trigger instability and decreases the final peak height of the layer. When the surfactant strength is large, the thin-film dynamics coincide with the dynamics of a surfactant-free layer but with time slowed by a factor of four and the capillary Bingham number, a parameter proportional to the yield stress, exactly doubled. By solving the long-wave equations numerically, we quantify how increasing surfactant strength can increase the critical layer thickness for plug formation to occur and delay plugging. The previously established effect of the yield stress in suppressing plug formation [Shemilt et al., J. Fluid Mech., 2022, vol. 944, A22] is shown to be amplified by introducing surfactant. We discuss the implications of these results for understanding the impact of surfactant deficiency and increased mucus yield stress in obstructive lung diseases.

physics.flu-dyn↗

arXiv2018

Stable and Unstable Vortex Knots in Excitable Media

We study the dynamics of knotted vortices in a bulk excitable medium using the FitzHugh-Nagumo model. From a systematic survey of all knots of at most eight crossings we establish that the generic behaviour is of unsteady, irregular dynamics, with prolonged periods of expansion of parts of the vortex. The mechanism for the length expansion is a long-range `wave slapping' interaction, analogous to that responsible for the annihilation of small vortex rings by larger ones. We also show that there are stable vortex geometries for certain knots; in addition to the unknot, trefoil and figure eight knots reported previously, we have found stable examples of the Whitehead link and $6_2$ knot. We give a thorough characterisation of their geometry and steady state motion. For the unknot, trefoil and figure eight knots we greatly expand previous evidence that FitzHugh-Nagumo dynamics untangles initially complex geometries while preserving topology.

nlin.PS↗

arXiv2017

Hydrodynamic instabilities in active cholesteric liquid crystals

We describe the basic properties and consequences of introducing active stresses, with principal direction along the local director, in cholesteric liquid crystals. The helical ground state is found to be linearly unstable to extensile stresses, without threshold in the limit of infinite system size, whereas contractile stresses are hydrodynamically screened by the cholesteric elasticity to give a finite threshold. This is confirmed numerically and the non-linear consequences of instability, in both extensile and contractile cases, are studied. We also consider the stresses associated to defects in the cholesteric pitch ($λ$ lines) and show how the geometry near to the defect generates threshold-less flows reminiscent of those for defects in active nematics. At large extensile activity $λ$ lines are spontaneously created and can form steady state patterns sustained by constant active flows.

cond-mat.soft↗

arXiv2016

Instabilities, motion and deformation of active fluid droplets

We consider two minimal models of active fluid droplets that exhibit complex dynamics including steady motion, deformation, rotation and oscillating motion. First we consider a droplet with a concentration of active contractile matter adsorbed to its boundary. We analytically predict activity driven instabilities in the concentration profile, and compare them to the dynamics we find from simulations. Secondly, we consider a droplet of active polar fluid of constant concentration. In this system we predict, motion and deformation of the droplets in certain activity ranges due to instabilities in the polarisation field. Both these systems show spontaneous transitions to motility and deformation which resemble dynamics of the cell cytoskeleton in animal cells.

cond-mat.soft↗

arXiv2016

Immersed Boundary Simulations of Active Fluid Droplets

We present numerical simulations of active fluid droplets immersed in an external fluid in 2-dimensions { using} an Immersed Boundary method to simulate the fluid droplet interface as a Lagrangian mesh. We present results from two example systems, firstly an active isotropic fluid boundary consisting of particles that can bind and unbind from the interface and generate surface tension gradients through active contractility. Secondly, a droplet filled with an active polar fluid with { homeotropic} anchoring at the droplet interface. These two systems demonstrate spontaneous symmetry breaking and steady state dynamics resembling cell motility and division and show complex feedback mechanisms with minimal degrees of freedom. The simulations outlined here will be useful for quantifying the wide range of dynamics observable in these active systems and modelling the effects of confinement in a consistent and adaptable way.

cond-mat.soft↗

arXiv2014

Active polar fluid flow in finite droplets

We present a continuum level analytical model of a droplet of active contractile fluid consisting of filaments and motors. We calculate the steady state flows that result from a splayed polarisation of the filaments. We account for the interaction with an arbitrary external medium by imposing a viscous friction at the fixed droplet boundary. We then show that the droplet has non-zero force dipole and quadrupole moments, the latter of which is essential for self-propelled motion of the droplet at low Reynolds' number. Therefore, this calculation describes a simple mechanism for the motility of a droplet of active contractile fluid embedded in a 3D environment, which is relevant to cell migration in confinement (for example, embedded within a gel or tissue). Our analytical results predict how the system depends on various parameters such as the effective friction coefficient, the phenomenological activity parameter and the splay of the imposed polarisation.

q-bio.CB↗