arXiv subjects

Carlo Bosio

Publications and source records attributed to Carlo Bosio.

7 recordsLinked to original sources

arXiv2026

Energy-Efficient Collaborative Transport of Tether-Suspended Payloads via Rotating Equilibrium

Collaborative aerial transportation of tethered payloads is fundamentally limited by space, power, and weight constraints. Conventional approaches rely on static equilibrium conditions, where each vehicle tilts to generate the forces that ensure they maintain a formation geometry that avoids aerodynamic interactions and collision. This horizontal thrust component represents a significant energy penalty compared to the ideal case in which each vehicle produces purely vertical thrust to lift the payload. Operating in tighter tether configurations can minimize this effect, but at the cost of either having to fly the vehicles in closer proximity, which risks collision, or significantly increasing the length of the tether, which increases complexity and reduces potential use-cases. We propose operating the tether-suspended flying system at a rotating equilibrium. By maintaining steady circular motion, centrifugal forces provide the necessary horizontal tether tension, allowing each quadrotor to generate purely vertical thrust and thus reducing the total force (and power) required compared to an equilibrium where the thrusts are not vertical. It also allows for a wider range of tether configurations to be used without sacrificing efficiency. Results demonstrate that rotating equilibria can reduce power consumption relative to static lifting by up to 20%, making collaborative aerial solutions more practically relevant.

cs.RO↗

arXiv2025

Combining Large Language Models and Gradient-Free Optimization for Automatic Control Policy Synthesis

Large Language models (LLMs) have shown promise as generators of symbolic control policies, producing interpretable program-like representations through iterative search. However, these models are not capable of separating the functional structure of a policy from the numerical values it is parametrized by, thus making the search process slow and inefficient. We propose a hybrid approach that decouples structural synthesis from parameter optimization by introducing an additional optimization layer for local parameter search. In our method, the numerical parameters of LLM-generated programs are extracted and optimized numerically to maximize task performance. With this integration, an LLM iterates over the functional structure of programs, while a separate optimization loop is used to find a locally optimal set of parameters accompanying candidate programs. We evaluate our method on a set of control tasks, showing that it achieves higher returns and improved sample efficiency compared to purely LLM-guided search. We show that combining symbolic program synthesis with numerical optimization yields interpretable yet high-performing policies, bridging the gap between language-model-guided design and classical control tuning. Our code is available at https://sites.google.com/berkeley.edu/colmo.

cs.LG↗

arXiv2025

RDAR: Reward-Driven Agent Relevance Estimation for Autonomous Driving

Human drivers focus only on a handful of agents at any one time. On the other hand, autonomous driving systems process complex scenes with numerous agents, regardless of whether they are pedestrians on a crosswalk or vehicles parked on the side of the road. While attention mechanisms offer an implicit way to reduce the input to the elements that affect decisions, existing attention mechanisms for capturing agent interactions are quadratic, and generally computationally expensive. We propose RDAR, a strategy to learn per-agent relevance -- how much each agent influences the behavior of the controlled vehicle -- by identifying which agents can be excluded from the input to a pre-trained behavior model. We formulate the masking procedure as a Markov Decision Process where the action consists of a binary mask indicating agent selection. We evaluate RDAR on a large-scale driving dataset, and demonstrate its ability to learn an accurate numerical measure of relevance by achieving comparable driving performance, in terms of overall progress, safety and performance, while processing significantly fewer agents compared to a state of the art behavior model.

cs.LG↗

arXiv2025

Autonomous Close-Proximity Photovoltaic Panel Coating Using a Quadcopter

Photovoltaic (PV) panels are becoming increasingly widespread in the domain of renewable energy, and thus, small efficiency gains can have massive effects. Anti-reflective and self-cleaning coatings enhance panel performance but degrade over time, requiring periodic reapplication. Uncrewed Aerial Vehicles (UAVs) offer a flexible and autonomous way to apply protective coatings more often and at lower cost compared to traditional manual coating methods. We present a quadcopter-based system, equipped with a liquid dispersion mechanism, designed to automate such tasks. The localization stack only uses onboard sensors, relying on visual-inertial odometry and the relative position of the PV panel detected with respect to the quadcopter. The control relies on a model-based controller that accounts for the ground effect and the mass decrease of the quadcopter during liquid dispersion. We validate the autonomy capabilities of our system through extensive indoor and outdoor experiments.

cs.RO↗

arXiv2024

Synthesizing Interpretable Control Policies through Large Language Model Guided Search

The combination of Large Language Models (LLMs), systematic evaluation, and evolutionary algorithms has enabled breakthroughs in combinatorial optimization and scientific discovery. We propose to extend this powerful combination to the control of dynamical systems, generating interpretable control policies capable of complex behaviors. With our novel method, we represent control policies as programs in standard languages like Python. We evaluate candidate controllers in simulation and evolve them using a pre-trained LLM. Unlike conventional learning-based control techniques, which rely on black-box neural networks to encode control policies, our approach enhances transparency and interpretability. We still take advantage of the power of large AI models, but only at the policy design phase, ensuring that all system components remain interpretable and easily verifiable at runtime. Additionally, the use of standard programming languages makes it straightforward for humans to finetune or adapt the controllers based on their expertise and intuition. We illustrate our method through its application to the synthesis of an interpretable control policy for the \textit{pendulum swing-up} and the \textit{ball in cup} tasks. We make the code available at https://github.com/muellerlab/synthesizing_interpretable_control_policies.git.

cs.AI↗

arXiv2024

Locomotion as Manipulation with ReachBot

Caves and lava tubes on the Moon and Mars are sites of geological and astrobiological interest but consist of terrain that is inaccessible with traditional robot locomotion. To support the exploration of these sites, we present ReachBot, a robot that uses extendable booms as appendages to manipulate itself with respect to irregular rock surfaces. The booms terminate in grippers equipped with microspines and provide ReachBot with a large workspace, allowing it to achieve force closure in enclosed spaces such as the walls of a lava tube. To propel ReachBot, we present a contact-before-motion planner for non-gaited legged locomotion that utilizes internal force control, similar to a multi-fingered hand, to keep its long, slender booms in tension. Motion planning also depends on finding and executing secure grips on rock features. We use a Monte Carlo simulation to inform gripper design and predict grasp strength and variability. Additionally, we use a two-step perception system to identify possible grasp locations. To validate our approach and mechanisms under realistic conditions, we deployed a single ReachBot arm and gripper in a lava tube in the Mojave Desert. The field test confirmed that ReachBot will find many targets for secure grasps with the proposed kinematic design.

cs.RO↗

arXiv2023

Automated Layout and Control Co-Design of Robust Multi-UAV Transportation Systems

The joint optimization of physical parameters and controllers in robotic systems is challenging. This is due to the difficulties of predicting the effect that changes in physical parameters have on final performances. At the same time, physical and morphological modifications can improve robot capabilities, perhaps completely unlocking new skills and tasks. We present a novel approach to co-optimize the physical layout and the control of a cooperative aerial transportation system. The goal is to achieve the most precise and robust flight when carrying a payload. We assume the agents are connected to the payload through rigid attachments, essentially transforming the whole system into a larger flying object with ``thrust modules" at the attachment locations of the quadcopters. We investigate the optimal arrangement of the thrust modules around the payload, so that the resulting system achieves the best disturbance rejection capabilities. We propose a novel metric of robustness inspired by H2 control, and propose an algorithm to optimize the layout of the vehicles around the object and their controller altogether. We experimentally validate the effectiveness of our approach using fleets of three and four quadcopters and payloads of diverse shapes.

cs.RO↗