arXiv subjects

Carlo Lefevre

Publications and source records attributed to Carlo Lefevre.

14 recordsLinked to original sources

arXiv2026

A general framework for disturbance compensation in airborne and seaborne gravimetry supported by machine learning

High-accuracy measurement systems operating in complex operational environments, such as airborne and seaborne gravimetry, are severely affected by interacting external influences (disturbances) including temperature variations, inertial accelerations, and platform rotations. This work aims to develop and prove a general method for compensating such disturbances beyond the limits of conventional approaches. We present a general framework based on three pillars: a multi-sensor system, supervised machine learning, and a dedicated laboratory -training platform-. This measurement technique was investigated through two experimental case studies relevant to airborne and seaborne gravimetry: (i) temperature and thermal-gradient rejection in a high-sensitivity tri-axial accelerometer, and (ii) pitch and roll rejection for vertical acceleration estimation. The experiments highlighted that, although the general framework provides a useful guideline, its application to airborne and seaborne gravimetry is challenging and not straightforward, requiring the development of dedicated and innovative experimental solutions. This difficulty arises from the specific nature of the measurand-gravity-which cannot be easily varied under controlled conditions. In this work, we present a dedicated approach to addressing these challenges.

physics.ins-det↗

arXiv2026

EXPO: a quantum leap in fast, wide-band X-ray polarimetry for astrophysics

The Enhanced X-ray Polarimetry Observatory (EXPO) is a mission concept proposed to ESA as an M8 candidate, with a prospective launch in 2041. Building on the scientific success of IXPE, EXPO is designed to overcome its two main limitations, the narrow 2-8 keV energy band and the very slow repointing time, and to enable new scientific capabilities. A wide energy band and fast repointing are essential for investigating the hard X-ray emission of magnetars and black-hole binaries, particle acceleration in supernova remnants and pulsar-wind nebulae, radiative transfer in highly magnetized plasmas, X-ray reflection in accretion flows and active galactic nuclei, and the prompt and afterglow emission of gamma-ray bursts and magnetar flares. EXPO comprises five focusing X-ray telescopes and gas photoelectric polarimeters based on the Timepix ASIC family with InGrid amplification, enabling three-dimensional track imaging and operation in the 2-35 keV band through optimized low- and medium-energy detector configurations. The mirror modules use proven electroformed nickel technology with Au-C coatings and an XMM-like focal length of 7.5 m. The polarimeters are complemented by a coded-mask Wide Field Instrument (WFI), derived from SVOM/ECLAIRs for continuous monitoring of a 2 sr field of view; a Spectral Imaging Camera (SIC), based on stacked CMOS and CdTe detectors for broadband imaging spectroscopy and accurate spectro-polarimetric decomposition; and an Instrument Control Unit (ICU) for payload management, onboard WFI image reconstruction, transient identification, and autonomous spacecraft repointing requests. These capabilities extend X-ray polarimetry into the hard X-ray domain and open a new observational window on fast transients, time-domain astrophysics, and multi-messenger astronomy.

astro-ph.IM↗

arXiv2026

Ion Irradiation of GridPix Detector at Bonn Isochronous Cyclotron

The potential successor of the IXPE --- the EXPO or Enhanced X-ray Polarimetry Observatory will have a new X-ray polarimeter based on GridPix technology. To certify this detector for operation within the expected radiation environment conditions, the irradiation tests were performed at the Bonn Isochronous Cyclotron at HISKPabbreviation\footnote{ stands for Helmholtz-Institut f\"ur Strahlen- und Kernphysik or Helmholz Institute for Radiation and Nuclear Physics}, University of Bonn. Two beam modes were used --- proton beam at 14\,MeV and 100\,MeV $^{14}\mathrm{N}^{5+}$ ions. The aforementioned GridPix detector contains the readout ASIC, Timepix, with $256\times256$ pixel grid with a pitch of \SI{55}{\micro\meter} and covered with a protection layer. The Al grid stands on the SU8 pillars above pixels forming the amplification stage. The alignment of grid holes and silicon pixels enable primary electron detection. This paper focuses on the description and results of these testbeams. The accumulated ion rates exceed by far the expected limits without a significant deterioration in chip performance.

physics.ins-det↗

arXiv2026

A Focal-plane X-ray Polarimeter with Spectral and Timing Capabilities for Future Missions

The NASA-ASI mission Imaging X-ray Polarimeter Explorer (IXPE) firmly established X-ray polarimetry as a core observation pillar of high-energy astrophysics, alongside imaging, timing, and spectroscopy. While IXPE made groundbreaking discoveries in the 2$-$8 keV range on both point and extended X-ray sources, the Gas Pixel Detectors onboard IXPE demand substantial improvements to be ready for the next generation of imaging X-ray polarimeters. Here, we present the development of a detector prototype that can deliver the next generation of sensitive imaging X-ray polarimetry across the energy band of 2--30 keV. We use Ar/DME based gas volume to absorb X-rays by the photoelectric effect and a pixelated CMOS readout ASIC, Timepix3, with excellent timing capabilities to image the resulting photoelectron track in three dimensions. The Timepix3 is integrated with a multiplication stage called InGrid that enables single-primary-electron detection from the gas volume. The photoelectron track reconstructed in three dimensions increases the polarimetric sensitivity towards the lowest operable energies, and the deadtime-free operation of the ASIC facilitates the usage as a focal plane instrument on high-throughput X-ray mirrors. With this prototype, we demonstrate a low-medium-energy X-ray polarimeter with excellent timing and moderate spectral capabilities.

astro-ph.IM↗

arXiv2026

Instruments for Focal Plane X-Ray Polarimetry in the Next Decade

The successful detection of X-ray polarization from many celestial sources belonging to different classes by the IXPE mission has opened a new window in X-ray astronomy. While an impressive number of scientific topics have already been addressed by IXPE, many of them would benefit from a new class of instrumentation that could be launched on a relatively short time scale. In this contribution, we present the development activities of a focal-plane polarimeter whose goal is to extend the energy range of IXPE up to tens of keV, with better sensitivity and lower background. Our design is based on the use of multilayer mirrors and stacked instrumentation, comprising either a low- or medium-energy imaging photoelectric polarimeter and an active Compton polarimeter. Such an approach relies on hardware with flight heritage and -- although still under development for the specific application in X-ray polarimetry -- it has the potential to answer compelling scientific questions and to soon become competitive from the point of view of feasibility for space applications.

astro-ph.IM↗

arXiv2024

Italian Spring Accelerometer measurements of unexpected Non Gravitational Perturbation during BepiColombo second Venus swing-by

The Italian Spring Accelerometer (ISA) is a three axis mass-spring accelerometer, one of the payloads of the BepiColombo joint space mission between the European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA). At launch in October 2018, BepiColombo started its seven-year cruise as a stack of three different modules, overall named Mercury Composite Spacecraft (MCS). The spacecraft will provide BepiColombo the necessary Delta V to reach Mercury with its electric thrusters and along with one, two and six gravity assists, respectively with Earth, Venus and Mercury. The accelerometer is accommodated on the Mercury Planetary Orbiter (MPO) module and, jointly with the Ka-band Transponder (KaT) tracking data, will primarily serve the BepiColombo Radio Science Experiment (BC-RSE). During the second Venus swing-by, strong tidal effect and external perturbations was expected to act on the spacecraft and to become detectable by ISA. The swing-by had a closest approach of about 550 km and the gravity gradient expected on the IDA sensing elements was perfectly measured. Hence, in this paper, the first direct Gravity Gradient effect detection generated by an extraterrestrial body is shown. Nevertheless, around the closest approach, the measurements evidenced a spurious acceleration event lasting for several minutes. This work, exploiting information on the Attitude and Orbit Control System (AOCS) commanded torques, focuses and analyses this ISA acceleration signal, ascribing it to a net force really acting on the MCS spacecraft. Furthermore, using an estimation method, the application point of the force is confined to an area close to the MPO radiator.

astro-ph.IM↗

arXiv2024

Towards imaging-spectro-polarimetry of solar flares in the X-rays

X-ray polarimetry of solar flares is still a not well established field of observation of our star. Past polarimeters were not able to measure with a high significance the polarization in X-rays from solar flares. Moreover, they had no imaging capabilities and measured only the polarization by integrating on all the image of the source. We propose a mission concept based on a gas photoelectric polarimeter, coupled with multilayer lobster-eye optics, to perform imaging-spectro-polarimetry of solar flares while monitoring the entire solar disc.

astro-ph.IM↗

arXiv2024

Temperature compensation in high accuracy accelerometers using multi-sensor and machine learning methods

Temperature is a major source of inaccuracy in high-sensitivity accelerometers and gravimeters. Active thermal control systems require power and may not be ideal in some contexts such as airborne or spaceborne applications. We propose a solution that relies on multiple thermometers placed within the accelerometer to measure temperature and thermal gradient variations. Machine Learning algorithms are used to relate the temperatures to their effect on the accelerometer readings. However, obtaining labeled data for training these algorithms can be difficult. Therefore, we also developed a training platform capable of replicating temperature variations in a laboratory setting. Our experiments revealed that thermal gradients had a significant effect on accelerometer readings, emphasizing the importance of multiple thermometers. The proposed method was experimentally tested and revealed a great potential to be extended to other sources of inaccuracy, such as rotations, as well as to other types of measuring systems, such as magnetometers or gyroscopes.

physics.ins-det↗

arXiv2022

Calibration of the IXPE focal plane X-ray polarimeters to polarized radiation

IXPE (Imaging X-ray Polarimetry Explorer) is a NASA Small Explorer mission -- in partnership with the Italian Space Agency (ASI) -- dedicated to X-ray polarimetry in the 2--8 keV energy band. The IXPE telescope comprises three grazing incidence mirror modules coupled to three detector units hosting each one a Gas Pixel Detector (GPD), a gas detector that allows measuring the polarization degree by using the photoelectric effect. A wide and accurate ground calibration was carried out on the IXPE Detector Units (DUs) at INAF-IAPS, in Italy, where a dedicated facility was set-up at this aim. In this paper, we present the results obtained from this calibration campaign to study the IXPE focal plane detector response to polarized radiation. In particular, we report on the modulation factor, which is the main parameter to estimate the sensitivity of a polarimeter.

astro-ph.IM↗

arXiv2021

The Imaging X-Ray Polarimetry Explorer (IXPE): Pre-Launch

Scheduled to launch in late 2021, the Imaging X-ray Polarimetry Explorer (IXPE) is a NASA Small Explorer Mission in collaboration with the Italian Space Agency (ASI). The mission will open a new window of investigation - imaging X-ray polarimetry. The observatory features 3 identical telescopes each consisting of a mirror module assembly with a polarization-sensitive imaging X-ray detector at the focus. A coilable boom, deployed on orbit, provides the necessary 4-m focal length. The observatory utilizes a 3-axis-stabilized spacecraft which provides services such as power, attitude determination and control, commanding, and telemetry to the ground. During its 2-year baseline mission, IXPE will conduct precise polarimetry for samples of multiple categories of X-ray sources, with follow-on observations of selected targets.

astro-ph.IM↗

arXiv2021

Calibration of the IXPE instrument

IXPE scientific payload comprises of three telescopes, each composed of a mirror and a photoelectric polarimeter based on the Gas Pixel Detector design. The three focal plane detectors, together with the unit which interfaces them to the spacecraft, are named IXPE Instrument and they will be built and calibrated in Italy; in this proceeding, we will present how IXPE Instrument will be calibrated, both on-ground and in-flight. The Instrument Calibration Equipment is being finalized at INAF-IAPS in Rome (Italy) to produce both polarized and unpolarized radiation, with a precise knowledge of direction, position, energy and polarization state of the incident beam. In flight, a set of four calibration sources based on radioactive material and mounted on a filter and calibration wheel will allow for the periodic calibration of all of the three IXPE focal plane detectors independently. A highly polarized source and an unpolarized one will be used to monitor the response to polarization; the remaining two will be used to calibrate the gain through the entire lifetime of the mission.

astro-ph.IM↗

arXiv2021

The IXPE Instrument Calibration Equipment

The Imaging X-ray Polarimetry Explorer is a mission dedicated to the measurement of X-ray polarization from tens of astrophysical sources belonging to different classes. Expected to be launched at the end of 2021, the payload comprises three mirrors and three focal plane imaging polarimeters, the latter being designed and built in Italy. While calibration is always an essential phase in the development of high-energy space missions, for IXPE it has been particularly extensive both to calibrate the response to polarization, which is peculiar to IXPE, and to achieve a statistical uncertainty below the expected sensitivity. In this paper we present the calibration equipment that was designed and built at INAF-IAPS in Rome, Italy, for the calibration of the polarization-sensitive focal plane detectors on-board IXPE. Equipment includes calibration sources, both polarized and unpolarized, stages to align and move the beam, test detectors and their mechanical assembly. While all these equipments were designed to fit the specific needs of the IXPE Instrument calibration, their versatility could also be used in the future for other projects.

astro-ph.IM↗

arXiv2021

The Instrument of the Imaging X-ray Polarimetry Explorer

While X-ray Spectroscopy, Timing and Imaging have improved verymuch since 1962, when the first astronomical non-solar source was discovered, especially with the launch of Newton/X-ray Multi-Mirror Mission, Rossi/X-ray Timing Explorer and Chandra/Advanced X-ray Astrophysics Facility, the progress of X-ray polarimetry has been meager. This is in part due to the lack of sensitive polarization detectors, in part due to the fate of approved missions and in part because the celestial X-ray sources appeared less polarized than expected. Only one positive measurement has been available until now. Indeed the eight Orbiting Solar Observatory measured the polarization of the Crab nebula in the 70s. The advent of techniques of microelectronics allowed for designing a detector based on the photoelectric effect in gas in an energy range where the optics are efficient in focusing X-rays. Herewe describe the Instrument, which is the major contribution of the Italian collaboration to the SmallExplorer mission called IXPE, the Imaging X-ray Polarimetry Explorer, which will be flown in late 2021. The instrument, is composed of three Detector Units, based on this technique, and a Detector Service Unit. Three Mirror Modules provided by Marshall Space Flight Center focus X-rays onto the detectors. In the following we will show the technological choices, their scientific motivation and the results from the calibration of the Instrument. IXPE will perform imaging, timing and energy resolved polarimetry in the 2-8 keV energy band opening this window of X-ray astronomy to tens of celestial sources of almost all classes.

astro-ph.IM↗

arXiv2020

In-flight calibration system of Imaging X-ray Polarimetry Explorer

The NASA/ASI Imaging X-ray Polarimetry Explorer, which will be launched in 2021, will be the first instrument to perform spatially resolved X-ray polarimetry on several astronomical sources in the 2-8 keV energy band. These measurements are made possible owing to the use of a gas pixel detector (GPD) at the focus of three X-ray telescopes. The GPD allows simultaneous measurements of the interaction point, energy, arrival time, and polarization angle of detected X-ray photons. The increase in sensitivity, achieved 40 years ago, for imaging and spectroscopy with the Einstein satellite will thus be extended to X-ray polarimetry for the first time. The characteristics of gas multiplication detectors are subject to changes over time. Because the GPD is a novel instrument, it is particularly important to verify its performance and stability during its mission lifetime. For this purpose, the spacecraft hosts a filter and calibration set (FCS), which includes both polarized and unpolarized calibration sources for performing in-flight calibration of the instruments. In this study, we present the design of the flight models of the FCS and the first measurements obtained using silicon drift detectors and CCD cameras, as well as those obtained in thermal vacuum with the flight units of the GPD. We show that the calibration sources successfully assess and verify the functionality of the GPD and validate its scientific results in orbit; this improves our knowledge of the behavior of these detectors in X-ray polarimetry.

astro-ph.IM↗