arXiv subjects

Carlo Monjaraz-Tec

Publications and source records attributed to Carlo Monjaraz-Tec.

3 recordsLinked to original sources

arXiv2022

Computational and experimental analysis of the impact of a sphere on a beam and the resulting modal energy distribution

We consider the common problem setting of an elastic sphere impacting on a flexible beam. In contrast to previous studies, we analyze the modal energy distribution induced by the impact, having in mind the particular application of impact vibration absorbers. Also, the beam is analyzed in the clamped-clamped configuration, in addition to the free-free configuration usually considered. We demonstrate that the designed test rig permits to obtain well-repeatable measurements. The measurements are confronted with predictions obtained using two different approaches, state-of-the-art Finite Element Analysis and a recently developed computational approach involving a reduced-order model. The innovative aspect of the latter approach is to achieve a massless contact boundary using component mode synthesis, which reduces the mathematical model order and numerical oscillations. We show that the novel computational approach reduces the numerical effort by 3-4 orders of magnitude compared to state-of-the-art Finite Element Analysis, without compromising the excellent agreement with the measurements.

eess.SY↗

arXiv2022

Prediction and validation of the strongly modulated forced response of two beams undergoing frictional impacts

We consider two cantilevered beams undergoing frictional impacts at the free end. The beams are designed to be of similar geometry so that they have distinct but close natural frequencies. Under harmonic base excitation near the primary resonance with the higher-frequency fundamental bending mode, the system shows a strongly modulated non-periodic response. The purpose of this work is to analyze to what extent the non-periodic vibro-impact dynamics can be predicted. To this end, we use a recently developed modeling and simulation approach. The approach relies on component mode synthesis, the massless boundary concept and an appropriate time stepping scheme. Unilateral contact and dry friction are modeled as set-valued laws and imposed locally within the spatially resolved contact area. A linear model updating is carried out based on the natural frequencies and damping ratios identified in the regime without impacts. The nonlinear simulation of the steady-state response to forward and backward stepped sine excitation is compared against measurements. The results are in very good agreement, especially in the light of the uncertainty associated with the observed material loss in the contact region and the nonlinear behavior of the clamping.

eess.SY↗

arXiv2021

A massless boundary component mode synthesis method for elastodynamic contact problems

We propose to combine the ideas of mass redistribution and component mode synthesis. More specifically, we employ the MacNeal method, which readily leads to a singular mass matrix, and an accordingly modified version of the Craig-Bampton method. Besides obtaining a massless boundary, we achieve a drastic reduction of the mathematical model order in this way compared to the parent finite element model. Contact is modeled using set-valued laws and time stepping is carried out with a semi-explicit scheme. We assess the method's computational performance by a series of benchmarks, including both frictionless and frictional contact. The results indicate that the proposed method achieves excellent energy conservation properties and superior convergence behavior. It reduces the spurious oscillations and decreases the computational effort by about 1-2 orders of magnitude compared to the current state of the art (mass-carrying component mode synthesis method). We believe that the computational performance and favorable energy conservation properties will be valuable for the prediction of vibro-impact processes and physical damping.

cs.CE↗