Searcharxiv⌕ Search

arXiv subjects

Carlo Sirtori

Publications and source records attributed to Carlo Sirtori.

At least 19 recordsLinked to original sources
arXiv2026

Proof of concept of heterodyne interferometry at 10.6 um using photonic correlation

The task of imaging complex dust environments such as the inner astronomical units of a planet-forming disks requires dedicated mid-infrared (MIR) interferometric facilities with kilometric baselines and a large number of telescopes. Extrapolating technologies from current facilities is not straightforward. We aim to demonstrate the feasibility of using MIR heterodyne interferometry with a photonic correlation approach to recombine MIR signals from distant telescopes. We want to determine the current technological limits of such systems are. We developed a laboratory demonstration bench that can correlate MIR signals at 10 um with a photonic correlator. The photonic correlator uses commercially available telecom components at 1.5 um to transport and correlate heterodyne signals that could go up to 10 GHz in bandwidth, directly extendable to 40 GHz. We used the demonstration bench to study the noise levels and detection limits of a heterodyne interferometer with a photonic correlation. We confirm the correlation exhibited by wideband MIR signals with the photonic correlator, along with a characterization of the performance of the system and analyzed the noise levels. We show that the photonic correlator does not limit the detection and that it can be used to compensate for free-space delays at 10 um with a fiber delay at 1.5 um. With our current sub-optimal commercial infrared (IR) detectors, we have derived a detection limit of 130 Jy that is coherent flux for 8 m class telescopes with 1 h of incoherent integration. We discuss the possibility of lowering the detection limit down to typical T-Tauri stars (approximately 1 Jy) using new detectors and coherent integration based upon local oscillator synchronization with telecom fiber links.

astro-ph.IM↗
arXiv2026

Purcell enhanced electroluminescence of a unipolar light emitting quantum device at 10 micron

Efficient generation of radiation in the mid- and far- infrared relies primarily on lasers and coherent nonlinear optical phenomena driven by lasers. This wavelength range lacks of luminescent devices because the spontaneous emission rate becomes much longer than the nonradiative energy relaxation processes and therefore emitters have to count on stimulated emission produced by linear or non-linear optical gain. However, spontaneous emission is not a fundamental property of the emitter. By engineering metamaterials composed of arrays of nano-emitters into microcavities coupled to patch antennas, we have demonstrated mid-infrared electroluminescent devices emitting a collimated beam with excellent spatial properties and a factor 100 increase in the collected power, compared to standard devices. Our results illustrate that by reshaping the photonic environment around emitting dipoles, as in the Purcell effect, it is possible to enhance the spontaneous emission and conceive efficient optoelectronic light emitting devices that operate close to the thermodynamical equilibrium as LEDs in the visible range.

quant-ph↗
arXiv2025

Accurate prediction of optical transitions in epitaxial InGaAs/InAlAs asymmetric coupled quantum well structures

Atomically-resolved Z-contrast and strain mappings are used to extract a model of the composition of an InGaAs/InAlAs asymmetric coupled quantum-well structure grown on InP using metal-organic vapor phase epitaxy. The model accounts for grading across the multiple alloy interfaces. The model is used to compute intersubband absorption in the structure. The simulation accurately predicts the experimental absorption spectrum of the structure within only a few meV, an almost ten-fold improvement over simulations using a square-band profile with nominal alloy compositions, and a significant step forward in accurate and predictive simulations of the optical properties epitaxial heterostructures for emission, modulation and detection in mid-infrared.

cond-mat.mtrl-sci↗
arXiv2025

Heterodyne coherent detection of phase modulation in a mid-infrared unipolar device

Phase modulation is demonstrated in a quantum Stark effect modulator designed to operate in the mid-infrared at wavelength around 10 $μ$m. Both phase and amplitude modulation are simultaneously resolved through the measurement of the heterodyne signal arising from the beating of a quantum cascade laser with a highly stabilized frequency comb. The highest measured phase shift is more than 5 degrees with an associated intensity modulation of 5%. The experimental results are in full agreement with our model in which the complex susceptibility is precisely described considering the linear voltage dependent Stark shift of the optical resonance.

physics.optics↗
arXiv2025

Mid-Infrared Frequency Combs and Pulse Generation based on Single Section Interband Cascade Lasers

Interband Cascade Lasers (ICLs) are semiconductor lasers emitting in the mid-wave infrared (MWIR 3-6 μm) and can operate as frequency combs (FCs). These demonstrations are based on double section cavities that can reduce dispersion and/or are adapted for radio-frequency operation. Here we show that ICLs FCs at long wavelengths, where the refractive index dispersion reduces, can be realized in a single long section cavity. We show FC generation for ICLs operating at λ ~ 4.2 μm, demonstrating narrow electrical beatnotes over a large current range. We also reconstruct the ultrafast temporal response through a modified SWIFT spectroscopy setup with two fast MWIR detectors, which shows a frequency modulated response in free-running operation. Further, we show that, through active modelocking, the ICL can be forced to generate short pulses on the order of 3 ps. This temporal response is in agreement with Maxwell Bloch simulations, highlighting that these devices possess long dynamics (~100ps) and potentially makes them appropriate for the generation of large peak powers in the MWIR.

physics.optics↗
arXiv2024

Heterodyne coherent detection of the electric field temporal trace emitted by frequency-modulated comb lasers

Frequency-modulated (FM) combs are produced by mode-locked lasers in which the electric field has a linearly chirped frequency and nearly constant amplitude. This regime of operation occurs naturally in certain laser systems and constitutes a valuable alternative to generate spectra with equidistant modes. Here, we use a low-noise fs-pulse comb as the local oscillator and combine dual comb heterodyne detection with time domain analysis of the multi-heterodyne signal to reveal the temporal trace of both amplitude and phase quadratures of FM comb lasers' electric field. This technique is applied to both a dense and a harmonic mid-infrared free-running quantum cascade laser frequency comb and shows direct evidence of the FM behavior together with the high degree of coherence of these sources. Our results furnish a deeper insight on the origin of the FM combs and pave the way to further improvement and optimization of these devices.

physics.optics↗
arXiv2024

Ultra-sensitive heterodyne detection at room temperature in the atmospheric windows

We report room temperature heterodyne detection of a quantum cascade laser beaten with a local oscillator on a unipolar quantum photodetector in two different atmospheric windows, at 4.8 $μ$m and 9 $μ$m. A noise equivalent power of few pW is measured by employing an active stabilization technique in which the local oscillator and the signal are locked in phase. The measured heterodyne noise equivalent power is six orders of magnitude lower than that obtained with direct detection.

physics.optics↗
arXiv2023

Phonon-mediated dark to bright plasmon conversion

The optical response of a matter excitation embedded in nanophotonic devices is commonly described by the Drude-Lorentz model. Here, we demonstrate that this widely used approach fails in the case where quantum-confined plasmons of a two-dimensional electron gas interact strongly with optical phonons. We propose a new quantum model which contains the semiclassical Drude-Lorentz one for simple electronic potentials, but predicts very different results in symmetry-broken potentials. We unveil a new mechanism for the oscillator strength transfer between bright phonon-polariton and dark plasmon modes, enabling thus new quantum degrees of freedom for designing the optical response of nanostructures.

cond-mat.mes-hall↗
arXiv2022

Characterization of Mid-Infrared Intersubband Detectors for Astronomical Heterodyne Interferometry

One of the major challenges of mid-infrared astronomical heterodyne interferometry is its sensitivity limitations. Detectors capable of handling several 10 GHz bandwidths have been identified as key building blocks of future instruments. Intersubband detectors based on heterostructures have recently demonstrated their ability to provide such performances. In this work we characterize a Quantum Well Infrared Photodetector in terms of noise, dynamic range and bandwidth in a non-interferometric heterodyne set-up. We discuss the possibility to use them on astronomical systems to measure the beating between the local oscillator and the astronomical signal.

astro-ph.IM↗
arXiv2020

High temperature metamaterial terahertz quantum detector

We demonstrate a high temperature performance quantum detector of Terahertz (THz) radiation based on three-dimensional metamaterial. The metamaterial unit cell consists of an inductor-capacitor (LC) resonator laterally coupled with antenna elements. The absorbing region, consisting of semiconductor quantum wells is contained in the strongly ultra-subwavelength capacitors of the LC structure. The high radiation loss of the antenna allows strongly increased collection efficiency for the incident THz radiation, while the small effective volume of the LC resonator allows intense light-matter coupling with reduced electrical area. As a result, our detectors operates at much higher temperatures than conventional quantum well detectors demonstrated so far.

physics.optics↗
arXiv2020

Semiconductor quantum plasmonics

We investigate the frontier between classical and quantum plasmonics in highly doped semiconductor layers. The choice of a semiconductor platform instead of metals for our study permits an accurate description of the quantum nature of the electrons constituting the plasmonic response, which is a crucial requirement for quantum plasmonics. Our quantum model allows us to calculate the collective plasmonic resonances from the electronic states determined by an arbitrary one-dimensional potential. Our approach is corroborated with experimental spectra, realized on a single quantum well, in which higher order longitudinal plasmonic modes are present. We demonstrate that their energy depends on the plasma energy, as it is also the case for metals, but also on the size confinement of the constituent electrons. This work opens the way towards the applicability of quantum engineering techniques for semiconductor plasmonics.

cond-mat.mes-hall↗
arXiv2020

Semiconductor quantum plasmons for high frequency thermal emission

Plasmons in heavily doped semiconductor layers are optically active excitations with sharp resonances in the 5-15 um wavelength region set by the doping level and the effective mass. Here we demonstrate that volume plasmons can form in doped layers of widths of hundreds of nanometers, without the need of potential barrier for electronic confinement. Their strong interaction with light makes them perfect absorber and therefore suitable for incandescent emission. Moreover, by injecting microwave current in the doped layer, we can modulate the temperature of the electron gas. We have fabricated devices for high frequency thermal emission and measured incandescent emission up to 50MHz, limited by the cutoff of our detector. The frequency dependent thermal emission is very well reproduced by our theoretical model that let us envision a frequency cutoff in the tens of GHz.

cond-mat.mes-hall↗
arXiv2020

Quasi-static and propagating modes in three-dimensional THz circuits

We provide an analysis of the electromagnetic modes of three-dimensional metamaterial resonators in the THz frequency range. The fundamental resonance of the structures is fully described by an analytical circuit model, which not only reproduces the resonant frequencies but also the coupling of the metamaterial with an incident THz radiation. We also evidence the contribution of the propagation effects, and show how they can be reduced by design. In the optimized design the electric field energy is lumped into ultra-subwavelength ($λ$/100) capacitors, where we insert semiconductor absorber based on the collective electronic excitation in a two dimensional electron gas. The optimized electric field confinement is evidenced by the observation of the ultra-strong light-matter coupling regime, and opens many possible applications for these structures for detectors, modulators and sources of THz radiation.

physics.optics↗
arXiv2020

Long-wavelength infrared photovoltaic heterodyne receivers using patch-antenna quantum cascade detectors

Quantum cascade detectors (QCD) are unipolar infrared devices where the transport of the photo excited carriers takes place through confined electronic states, without an applied bias. In this photovoltaic mode, the detector's noise is not dominated by a dark shot noise process, therefore, performances are less degraded at high temperature with respect to photoconductive detectors. This work describes a 9 um QCD embedded into a patch-antenna metamaterial which operates with state-of-the-art performances. The metamaterial gathers photons on a collection area, Acoll, much bigger than the geometrical area of the detector, improving the signal to noise ratio up to room temperature. The background-limited detectivity at 83 K is 5.5 x 10^10 cm Hz^1/2 W^-1, while at room temperature, the responsivity is 50 mA/W at 0 V bias. Patch antenna QCD is an ideal receiver for a heterodyne detection set-up, where a signal at a frequency 1.4 GHz and T=295 K is reported as first demonstration of uncooled 9um photovoltaic receivers with GHz electrical bandwidth. These findings guide the research towards uncooled IR quantum limited detection.

physics.app-ph↗
arXiv2020

Quantum Theory of Multisubband Plasmon-Phonon Coupling

We present a theoretical description of the coupling between longitudinal optical phonons and collective excitations of a two-dimensional electron gas. By diagonalizing the Hamiltonian of the system, including Coulomb electron-electron and Fröhlich interactions, we observe the formation of multisubband polarons, mixed states partially phonon and partially multisubband plasmon, characterized by a coupling energy which is a significant fraction, up to ~40%, of the phonon energy. We demonstrate that multisubband plasmons and longitudinal optical phonons are in the ultra-strong coupling regime in several III-V and II-VI material systems.

cond-mat.mes-hall↗
arXiv2019

Ultra-Strong Light-Matter Coupling in Deeply Subwavelength THz LC resonators

The ultra-strong light-matter coupling regime has been demonstrated in a novel three-dimensional inductor-capacitor (LC) circuit resonator, embedding a semiconductor two-dimensional electron gas in the capacitive part. The fundamental resonance of the LC circuit interacts with the intersubband plasmon excitation of the electron gas at $ω_c = 3.3$~THz with a normalized coupling strength $2Ω_R/ω_c = 0.27$. Light matter interaction is driven by the quasi-static electric field in the capacitors, and takes place in a highly subwavelength effective volume $V_{\mathrm{eff}} = 10^{-6}λ_0^3$ . This enables the observation of the ultra-strong light-matter coupling with $2.4\times10^3$ electrons only. Notably, our fabrication protocol can be applied to the integration of a semiconductor region into arbitrary nano-engineered three dimensional meta-atoms. This circuit architecture can be considered the building block of metamaterials for ultra-low dark current detectors.

cond-mat.mes-hall↗
arXiv2017

Room temperature 9 $μ$m photodetectors and GHz heterodyne receivers

Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature operation is still beyond reach for semiconductor photodetectors in the 8-12 $μ$m wavelength band$^2$, and all developments for applications such as imaging, environmental remote sensing and laser-based free-space communication$^{3-5}$ have therefore had to be realised at low temperatures. For these devices, high sensitivity and high speed have never been compatible with high temperature operation$^{6, 7}$. Here, we show that a 9 $μ$m quantum well infrared photodetector$^8$, implemented in a metamaterial made of subwavelength metallic resonators$^{9-12}$, has strongly enhanced performances up to room temperature. This occurs because the photonic collection area is increased with respect to the electrical area for each resonator, thus significantly reducing the dark current of the device$^{13}$. Furthermore, we show that our photonic architecture overcomes intrinsic limitations of the material, such as the drop of the electronic drift velocity with temperature$^{14, 15}$, which constrains conventional geometries at cryogenic operation$^6$. Finally, the reduced physical area of the device and its increased responsivity allows us, for the first time, to take advantage of the intrinsic high frequency response of the quantum detector$^7$ at room temperature. By beating two quantum cascade lasers$^{16}$ we have measured the heterodyne signal at high frequencies up to 4 GHz.

physics.app-ph↗