arXiv subjects

Carlos Correia

Publications and source records attributed to Carlos Correia.

At least 19 recordsLinked to original sources

arXiv2026

Using VLTI/GRAVITY+ to determine the identity of a third planet candidate in the PDS 70 system

Detections of protoplanets are rare and protoplanetary disk features mischaracterized as planets are common. PDS 70 is one of only two stars known to host multiple confirmed protoplanets, PDS 70 b and c, and repeat detections of a third point-like source in the system suggest the presence of third inner planet. However, previous observations of this third source are insufficient to distinguish whether it is a planet or a concentrated dust clump in Keplerian motion. Our observations with VLTI/GRAVITY+ did not re-detect this point-like source, suggesting that it is, in fact, a dust clump and not a planet. These observations demonstrate how the angular resolving power of VLTI/GRAVITY+ can be used to distinguish between protoplanets and protoplanetary disk features.

astro-ph.EP↗

arXiv2024

High strehl and high contrast for the ELT instrument METIS -- Final design, implementation, and predicted performance of the single-conjugate adaptive optics system

The Mid-infrared ELT Imager and Spectrograph (METIS) is a first-generation instrument for the Extremely Large Telescope (ELT), Europe's next-generation 39 m ground-based telescope for optical and infrared wavelengths. METIS will offer diffraction-limited imaging, low- and medium-resolution slit spectroscopy, and coronagraphy for high-contrast imaging between 3 and 13 microns, as well as high-resolution integral field spectroscopy between 3 and 5 microns. The main METIS science goals are the detection and characterisation of exoplanets, the investigation of proto-planetary disks, and the formation of planets. The Single-Conjugate Adaptive Optics (SCAO) system corrects atmospheric distortions and is thus essential for diffraction-limited observations with METIS. Numerous challenging aspects of an ELT Adaptive Optics (AO) system are addressed in the mature designs for the SCAO control system and the SCAO hardware module: the complex interaction with the telescope entities that participate in the AO control, wavefront reconstruction with a fragmented and moving pupil, secondary control tasks to deal with differential image motion, non-common path aberrations and mis-registration. A K-band pyramid wavefront sensor and a GPU-based Real-Time Computer (RTC), tailored to the needs of METIS at the ELT, are core components. This current paper serves as a natural sequel to our previous work presented in Hippler et al. (2018). It includes updated performance estimations in terms of several key performance indicators, including achieved contrast curves. We outline all important design decisions that were taken, and present the major challenges we faced and the main analyses carried out to arrive at these decisions and eventually the final design. We also elaborate on our testing and verification strategy, and, last not least, comprehensively present the full design, hardware and software.

astro-ph.IM↗

arXiv2023

Simulating METIS SCAO System

METIS, the Mid-Infrared ELT Imager and Spectrograph, is one of the four first-generation ELT instruments scheduled to see first light in 2028. Its two main science modules are supported by an adaptive optics system featuring a pyramid sensor with 90x90 subapertures working in the H and K bands. During the PDR and FDR phases, extensive simulations were carried out to support the sensing, reconstruction, and control concept of METIS single-conjugate adaptive optics (SCAO) system. We present details on the implementation of the COMPASS-based environment used for the simulations, the metrics used for analyzing our performance expectations, an overview of the main results, and some details on special cases like non-common path aberrations (NCPA) and water vapor seeing, as well as the low-wind effect.

astro-ph.IM↗

arXiv2023

The Adaptive Optics System for the Gemini Infrared Multi-Object Spectrograph: Performance Modeling

The Gemini Infrared Multi-Object Spectrograph (GIRMOS) will be a near-infrared, multi-object, medium spectral resolution, integral field spectrograph (IFS) for Gemini North Telescope, designed to operate behind the future Gemini North Adaptive Optics system (GNAO). In addition to a first ground layer Adaptive Optics (AO) correction in closed loop carried out by GNAO, each of the four GIRMOS IFSs will independently perform additional multi-object AO correction in open loop, resulting in an improved image quality that is critical to achieve top level science requirements. We present the baseline parameters and simulated performance of GIRMOS obtained by modeling both the GNAO and GIRMOS AO systems. The image quality requirement for GIRMOS is that 57% of the energy of an unresolved point-spread function ensquared within a 0.1 x 0.1 arcsecond at 2.0 μ m. It was established that GIRMOS will be an order 16 x 16 adaptive optics (AO) system after examining the tradeoffs between performance, risks and costs. The ensquared energy requirement will be met in median atmospheric conditions at Maunakea at 30° from zenith.

astro-ph.IM↗

arXiv2023

Integrated turbulence parameters' estimation from NAOMI adaptive optics telemetry data

Monitoring turbulence parameters is crucial in high-angular resolution astronomy for various purposes, such as optimising adaptive optics systems or fringe trackers. The former are present at most modern observatories and will remain significant in the future. This makes them a valuable complementary tool for the estimation of turbulence parameters. The feasibility of estimating turbulence parameters from low-resolution sensors remains untested. We perform seeing estimates for both simulated and on-sky telemetry data sourced from the new adaptive optics module installed on the four Auxiliary Telescopes of the Very Large Telescope Interferometer. The seeing estimates are obtained from a modified and optimised algorithm that employs a chi-squared modal fitting approach to the theoretical von Kármán model variances. The algorithm is built to retrieve turbulence parameters while simultaneously estimating and accounting for the remaining and measurement error. A Monte Carlo method is proposed for the estimation of the statistical uncertainty of the algorithm. The algorithm is shown to be able to achieve per cent accuracy in the estimation of the seeing with a temporal horizon of 20s on simulated data. A 0.76" +/- 1.2%$|_\mathrm{stat}$ +/- 1.2%$|_\mathrm{sys}$ median seeing was estimated from on-sky data collected from 2018 and 2020. The spatial distribution of the Auxiliary Telescopes across the Paranal Observatory was found to not play a role in the value of the seeing.

astro-ph.IM↗

arXiv2023

The ESO's Extremely Large Telescope Working Groups

Since 2005 ESO has been working with its community and industry to develop an extremely large optical/infrared telescope. ESO's Extremely Large Telescope, or ELT for short, is a revolutionary ground-based telescope that will have a 39-metre main mirror and will be the largest visible and infrared light telescope in the world. To address specific topics that are needed for the science operations and calibrations of the telescope, thirteen specific working groups were created to coordinate the effort between ESO, the instrument consortia, and the wider community. We describe here the goals of these working groups as well as their achievements so far.

astro-ph.IM↗

arXiv2022

Three-sided pyramid wavefront sensor. II. Preliminary demonstration on the new CACTI testbed

The next generation of giant ground and space telescopes will have the light-collecting power to detect and characterize potentially habitable terrestrial exoplanets using high-contrast imaging for the first time. This will only be achievable if the performance of Giant Segmented Mirror Telescopes (GSMTs) extreme adaptive optics (ExAO) systems are optimized to their full potential. A key component of an ExAO system is the wavefront sensor (WFS), which measures aberrations from atmospheric turbulence. A common choice in current and next-generation instruments is the pyramid wavefront sensor (PWFS). ExAO systems require high spatial and temporal sampling of wavefronts to optimize performance, and as a result, require large detectors for the WFS. We present a closed-loop testbed demonstration of a three-sided pyramid wavefront sensor (3PWFS) as an alternative to the conventional four-sided pyramid wavefront (4PWFS) sensor for GSMT-ExAO applications on the new Comprehensive Adaptive Optics and Coronagraph Test Instrument (CACTI). The 3PWFS is less sensitive to read noise than the 4PWFS because it uses fewer detector pixels. The 3PWFS has further benefits: a high-quality three-sided pyramid optic is easier to manufacture than a four-sided pyramid. We detail the design of the two components of the CACTI system, the adaptive optics simulator and the PWFS testbed that includes both a 3PWFS and 4PWFS. A preliminary experiment was performed on CACTI to study the performance of the 3PWFS to the 4PWFS in varying strengths of turbulence using both the Raw Intensity and Slopes Map signal processing methods. This experiment was repeated for a modulation radius of 1.6 lambda/D and 3.25 lambda/D. We found that the performance of the two wavefront sensors is comparable if modal loop gains are tuned.

astro-ph.IM↗

arXiv2022

Super-resolution wavefront reconstruction

Super-Resolution (SR) is a technique that seeks to upscale the resolution of a set of measured signals. SR retrieves higher-frequency signal content by combining multiple lower resolution sampled data sets. SR is well known both in the temporal and spatial domains. It is widely used in imaging to reduce aliasing and enhance the resolution of coarsely sampled images.This paper applies the SR technique to the bi-dimensional wavefront reconstruction. In particular, we show how SR is intrinsically suited for tomographic multi WaveFront Sensor (WFS) AO systems revealing many of its advantages with minimal design effort. This paper provides a direct space and Fourier-optics description of the wavefront sensing operation and demonstrate how SR can be exploited through signal reconstruction, especially in the framework of Periodic Nonuniform Sampling. Both meta uniform and nonuniform sampling schemes are investigated. Then, the SR bi-dimensional model for a Shack Hartmann (SH) WFS is provided and the characteristics of the sensitivity function are analyzed. The SR concept is finally validated with numerical simulations of representative multi WFS SH AO systems. Our results show that combining several WFS samples in a SR framework grants access to a larger number of modes than the native one offered by a single WFS and that despite the fixed sub-aperture size across samples. Furthermore, we show that the associated noise propagation is not degraded under SR. Finally, the concept is extended to the signal produced by single Pyramid WFS. In conclusion, SR applied to wavefront reconstruction offers a new parameter space to explore as it decouples the size of the subaperture from the desired wavefront sampling resolution. By cutting short with old assumptions, new, more flexible and better performing AO designs become now possible.

astro-ph.IM↗

arXiv2022

Towards virtual access of adaptive optics telemetry data

Large amounts of Adaptive-Optics (AO) control loop data and telemetry are currently inaccessible to end-users. Broadening access to those data has the potential to change the AO landscape on many fronts, addressing several use-cases such as derivation of the system's PSF, turbulence characterisation and optimisation of system control. We address one of the biggest obstacles to sharing these data: the lack of standardisation, which hinders access. We propose an object-oriented Python package for AO telemetry, whose data model abstracts the user from an underlining archive-ready data exchange standard based on the Flexible Image Transport System (FITS). Its design supports data from a wide range of existing and future AO systems, either in raw format or abstracted from actual instrument details. We exemplify its usage with data from active AO systems on 10m-class observatories, of which two are currently supported (AOF and Keck), with plans for more.

astro-ph.IM↗

arXiv2022

Key wavefront sensors features for laser-assisted tomographic adaptive optics systems on the Extremely Large Telescope

Laser guide star (LGS) wave-front sensing (LGSWFS) is a key element of tomographic adaptive optics system. However, when considering Extremely Large Telescope (ELT) scales, the LGS spot elongation becomes so large that it challenges the standard recipes to design LGSWFS. For classical Shack-Hartmann wave-front sensor (SHWFS), which is the current baseline for all ELT LGS-assisted instruments, a trade-off between the pupil spatial sampling [number of sub-apertures (SAs)], the SA field-of-view (FoV) and the pixel sampling within each SA is required. For ELT scales, this trade-off is also driven by strong technical constraints, especially concerning the available detectors and in particular their number of pixels. For SHWFS, a larger field of view per SA allows mitigating the LGS spot truncation, which represents a severe loss of performance due to measurement biases. For a given number of available detectors pixels, the SA FoV is competing with the proper sampling of the LGS spots, and/or the total number of SAs. We proposed a sensitivity analysis, and we explore how these parameters impacts the final performance. In particular, we introduce the concept of super resolution, which allows one to reduce the pupil sampling per WFS and opens an opportunity to propose potential LGSWFS designs providing the best performance for ELT scales.

astro-ph.IM↗

arXiv2021

The Three-Sided PyramidWavefront Sensor. I. Simulations and Analysis for Astronomical Adaptive Optics

For ExAO instruments for the Giant Segmented Mirror Telescopes (GSMTs), alternative architectures of WFS are under consideration because there is a tradeoff between detector size, speed, and noise that reduces the performance of GSMT-ExAO wavefront control. One option under consideration for a GSMT-ExAO wavefront sensor is a three-sided PWFS (3PWFS). The 3PWFS creates three copies of the telescope pupil for wavefront sensing, compared to the conventional four-sided PWFS (4PWFS) which uses four pupils. The 3PWFS uses fewer detector pixels than the 4PWFS and should therefore be less sensitive to read noise. Here we develop a mathematical formalism based on the diffraction theory description of the Foucault knife edge test that predicts the intensity pattern after the PWFS. Our formalism allows us to calculate the intensity in the pupil images formed by the PWFS in the presence of phase errors corresponding to arbitrary Fourier modes. We then use the Object Oriented MATLAB Adaptive Optics toolbox (OOMAO) to simulate an end-to-end model of an adaptive optics system using a PWFS with modulation and compare the performance of the 3PWFS to the 4PWFS. In the case of a low read noise detector, the Strehl ratios of the 3PWFS and 4PWFS are within 0.01. When we included higher read noise in the simulation, we found a Strehl ratio gain of 0.036 for the 3PWFS using Raw Intensity over the 4PWFS using Slopes Maps at a stellar magnitude of 10. At the same magnitude, the 4PWFS RI also outperformed the 4PWFS SM, but the gain was only 0.012 Strehl. This is significant because 4PWFS using Slopes Maps is how the PWFS is conventionally used for AO wavefront sensing. We have found that the 3PWFS is a viable wavefront sensor that can fully reconstruct a wavefront and produce a stable closed-loop with correction comparable to that of a 4PWFS, with modestly better performance for high read-noise detectors.

astro-ph.IM↗

arXiv2021

Simultaneous estimation of segmented telescope phasing errors and non-common path aberrations from adaptive optics corrected images

We investigate the focal plane wavefront sensing technique, known as Phase Diversity, at the scientific focal plane of a segmented mirror telescope with an adaptive optics (AO) system. We specifically consider an optical system imaging a point source in the context of (i) an artificial source within the telescope structure and (ii) from AO-corrected images of a bright star. From our simulations, we reliably disentangle segmented telescope phasing errors from non-common path aberrations (NCPA) for both a theoretical source and on-sky, AO-corrected images where we have simulated the Keck/NIRC2 system. This quantification from on-sky images is appealing, as it's sensitive to the cumulative wavefront perturbations of the entire optical train; disentanglement of phasing errors and NCPA is therefore critical, where any potential correction to the primary mirror from an estimate must contain minimal NCPA contributions. Our estimates require a one-minute sequence of short-exposure, AO-corrected images; by exploiting a slight modification to the AO-loop, we find that 75 defocused images produces reliable estimates. We demonstrate a correction from our estimates to the primary and deformable mirror results in a wavefront error reduction of up to 67% and 65% for phasing errors and NCPA, respectively. If the segment phasing errors on the Keck primary are on the order of ~130 nm RMS, we show we can improve the H-band Strehl ratio by up to 10% by using our algorithm. We conclude our technique works well to estimate NCPA alone from on-sky images, suggesting it is a promising method for any AO-system.

astro-ph.IM↗

arXiv2021

Closed Loop Predictive Control of Adaptive Optics Systems with Convolutional Neural Networks

Predictive wavefront control is an important and rapidly developing field of adaptive optics (AO). Through the prediction of future wavefront effects, the inherent AO system servo-lag caused by the measurement, computation, and application of the wavefront correction can be significantly mitigated. This lag can impact the final delivered science image, including reduced strehl and contrast, and inhibits our ability to reliably use faint guidestars. We summarize here a novel method for training deep neural networks for predictive control based on an adversarial prior. Unlike previous methods in the literature, which have shown results based on previously generated data or for open-loop systems, we demonstrate our network's performance simulated in closed loop. Our models are able to both reduce effects induced by servo-lag and push the faint end of reliable control with natural guidestars, improving K-band Strehl performance compared to classical methods by over 55% for 16th magnitude guide stars on an 8-meter telescope. We further show that LSTM based approaches may be better suited in high-contrast scenarios where servo-lag error is most pronounced, while traditional feed forward models are better suited for high noise scenarios. Finally, we discuss future strategies for implementing our system in real-time and on astronomical telescope systems.

astro-ph.IM↗

arXiv2021

Entering into the Wide Field Adaptive Optics Era on Maunakea

As part of the National Science Foundation funded "Gemini in the Era of MultiMessenger Astronomy" (GEMMA) program, Gemini Observatory is developing GNAO, a widefield adaptive optics (AO) facility for Gemini-North on Maunakea, the only 8m-class open-access telescope available to the US astronomers in the northern hemisphere. GNAO will provide the user community with a queue-operated Multi-Conjugate AO (MCAO) system, enabling a wide range of innovative solar system, Galactic, and extragalactic science with a particular focus on synergies with JWST in the area of time-domain astronomy. The GNAO effort builds on institutional investment and experience with the more limited block-scheduled Gemini Multi-Conjugate System (GeMS), commissioned at Gemini South in 2013. The project involves close partnerships with the community through the recently established Gemini AO Working Group and the GNAO Science Team, as well as external instrument teams. The modular design of GNAO will enable a planned upgrade to a Ground Layer AO (GLAO) mode when combined with an Adaptive Secondary Mirror (ASM). By enhancing the natural seeing by an expected factor of two, GLAO will vastly improve Gemini North's observing efficiency for seeing-limited instruments and strengthen its survey capabilities for multi-messenger astronomy.

astro-ph.IM↗

arXiv2020

Pyramid wavefront sensor optical gains compensation using a convolutional model

Extremely Large Telescopes have overwhelmingly opted for the Pyramid wavefront sensor (PyWFS) over the more widely used Shack-Hartmann WaveFront Sensor (SHWFS) to perform their Single Conjugate Adaptive Optics (SCAO) mode. The PyWFS, a sensor based on Fourier filtering, has proven to be highly successful in many astronomy applications. However, it exhibits non-linearity behaviors that lead to a reduction of its sensitivity when working with non-zero residual wavefronts. This so-called Optical Gains (OG) effect, degrades the close loop performance of SCAO systems and prevents accurate correction of Non-Common Path Aberrations (NCPA). In this paper, we aim at computing the OG using a fast and agile strategy in order to control the PyWFS measurements in adaptive optics closed loop systems. Using a novel theoretical description of the PyFWS, which is based on a convolutional model, we are able to analytically predict the behavior of the PyWFS in closed-loop operation. This model enables us to explore the impact of residual wavefront error on particular aspects such as sensitivity and associated OG. The proposed method relies on the knowledge of the residual wavefront statistics and enables automatic estimation of the current OG. End-to-End numerical simulations are used to validate our predictions and test the relevance of our approach. We demonstrate, using on non-invasive strategy, that our method provides an accurate estimation of the OG. The model itself only requires AO telemetry data to derive statistical information on atmospheric turbulence. Furthermore, we show that by only using an estimation of the current Fried parameter r_0 and the basic system-level characteristics, OGs can be estimated with an accuracy of less than 10%. Finally, we highlight the importance of OG estimation in the case of NCPA compensation. The proposed method is applied to the PyWFS.

astro-ph.IM↗

arXiv2020

Design of the HARMONI Pyramid WFS module

Current designs for all three extremely large telescopes show the overwhelming adoption of the pyramid wavefront sensor (P-WFS) as the WFS of choice for adaptive optics (AO) systems sensing on natural guide stars (NGS) or extended objects. The key advantages of the P-WFS over the Shack-Hartmann are known and are mainly provided by the improved sensitivity (fainter NGS) and reduced sensitivity to spatial aliasing. However, robustness and tolerances of the P-WFS for the ELTs are not currently well understood. In this paper, we present simulation results for the single-conjugate AO mode of HARMONI, a visible and near-infrared integral field spectrograph for the European Extremely Large Telescope. We first explore the wavefront sensing issues related to the telescope itself; namely the island effect (i.e. differential piston) and M1 segments phasing errors. We present mitigation strategies to the island effect and their performance. We then focus on some performance optimisation aspects of the AO design to explore the impact of the RTC latency and the optical gain issues, which will in particular affect the high-contrast mode of HARMONI. Finally, we investigate the influence of the quality of glass pyramid prism itself, and of optical aberrations on the final AO performance. By relaxing the tolerances on the fabrication of the prism, we are able to reduce hardware costs and simplify integration. We show the importance of calibration (i.e. updating the control matrix) to capture any displacement of the telescope pupil and rotation of the support structure for M4. We also show the importance of the number of pixels used for wavefront sensing to relax tolerances of the pyramid prism. Finally, we present a detailed optical design of the pyramid prism, central element of the P-WFS.

astro-ph.IM↗

arXiv2020

The wind-driven halo in high-contrast images I: analysis from the focal plane images of SPHERE

Context. The wind driven halo is a feature observed within the images delivered by the latest generation of ground-based instruments equipped with an extreme adaptive optics system and a coronagraphic device, such as SPHERE at the VLT. This signature appears when the atmospheric turbulence conditions are varying faster than the adaptive optics loop can correct. The wind driven halo shows as a radial extension of the point spread function along a distinct direction (sometimes referred to as the butterfly pattern). When present, it significantly limits the contrast capabilities of the instrument and prevents the extraction of signals at close separation or extended signals such as circumstellar disks. This limitation is consequential because it contaminates the data a substantial fraction of the time: about 30% of the data produced by the VLT/SPHERE instrument are affected by the wind driven halo.Aims. This paper reviews the causes of the wind driven halo and presents a method to analyze its contribution directly from the scientific images. Its effect on the raw contrast and on the final contrast after post-processing is demonstrated.Methods. We used simulations and on-sky SPHERE data to verify that the parameters extracted with our method are capable of describing the wind driven halo present in the images. We studied the temporal, spatial and spectral variation of these parameters to point out its deleterious effect on the final contrast.Results. The data driven analysis we propose does provide information to accurately describe the wind driven halo contribution in the images. This analysis justifies why this is a fundamental limitation to the final contrast performance reached.Conclusions. With the established procedure, we will analyze a large sample of data delivered by SPHERE in order to propose, in the future, post-processing techniques tailored to remove the wind driven halo.

astro-ph.IM↗

arXiv2020

Reconstruction of the ground-layer adaptive-optics point spread function for MUSE Wide Field Mode observations

Here we describe a simple, efficient, and most importantly fully operational point-spread-function(PSF)-reconstruction approach for laser-assisted ground layer adaptive optics (GLAO) in the frame of the Multi Unit Spectroscopic Explorer (MUSE) Wide Field Mode. Based on clear astrophysical requirements derived by the MUSE team and using the functionality of the current ESO Adaptive Optics Facility we aim to develop an operational PSF-reconstruction (PSFR) algorithm and test it both in simulations and using on-sky data. The PSFR approach is based on a Fourier description of the GLAO correction to which the specific instrumental effects of MUSE Wide Field Mode (pixel size, internal aberrations, etc.) have been added. It was first thoroughly validated with full end-to-end simulations. Sensitivity to the main atmospheric and AO system parameters was analysed and the code was re-optimised to account for the sensitivity found. Finally, the optimised algorithm was tested and commissioned using more than one year of on-sky MUSE data. We demonstrate with an on-sky data analysis that our algorithm meets all the requirements imposed by the MUSE scientists, namely an accuracy better than a few percent on the critical PSF parameters including full width at half maximum and global PSF shape through the kurtosis parameter of a Moffat function. The PSFR algorithm is publicly available and is used routinely to assess the MUSE image quality for each observation. It can be included in any post-processing activity which requires knowledge of the PSF.

astro-ph.IM↗