arXiv subjects

Carlos Errando-Herranz

Publications and source records attributed to Carlos Errando-Herranz.

18 recordsLinked to original sources

arXiv2026

Single-photon emitters and spin-photon interfaces in silicon

Single photons enable the distribution of quantum information over large distances and thus play a major role in quantum technologies such as communication and computing. Solid-state emitters are practical and efficient sources of single photons that can be manufactured in large numbers. When combined with a spin, the resulting spin-photon interfaces can store quantum states for extended periods and serve as the basis for quantum networks and repeaters. Among the many host materials explored over the past few decades, silicon stands out for its advanced nanofabrication, the maturity of its integrated photonics and microelectronics, and its high isotopic purity, which leads to exceptionally long spin coherence. These properties position silicon single-photon emitters and spin-photon interfaces among the most promising hardware platforms for implementing quantum networks and distributed quantum information processors. This review summarizes the current state of the art and open challenges towards coherent single-photon sources and scalable spin-photon interfaces based on color centers and erbium dopants in nanophotonic silicon structures.

quant-ph↗

arXiv2026

Geometry-enabled magnetic resilience in superconducting nanowire single-photon detectors

While magnetic fields and superconductors are both central to classical and quantum technologies, their combined use is often challenging, as magnetic fields significantly affect superconducting device performance. In superconducting nanowire single-photon detectors (SNSPDs), magnetic fields drastically reduce detection efficiencies, hampering their application in magnetically-active classical and quantum photonics. Here, we systematically characterize the performance of NbTiN SNSPDs under magnetic fields and show the enhancement of their intrinsic detection efficiency (IDE) at lower bias currents and its suppression at higher currents. This leads to SNSPD performance degradation through reduced or disappearing saturation plateaus. We show that the magnitude of this degradation is highly dependent on nanowire width and demonstrate width-optimized SNSPDs with saturating IDE for a wide range of photon energies under application-relevant magnetic fields. Minimizing degradation in superconducting devices under magnetic fields enables applications like detector-integrated spin-optic and atomic quantum processors, high-sensitivity magnetometry, and quantum transduction.

cond-mat.supr-con↗

arXiv2025

Spectral tuning and nanoscale localization of single color centers in silicon via controllable strain

The development of color centers in silicon enables scalable quantum technologies by combining telecom-wavelength emission and compatibility with mature silicon fabrication. However, large-scale integration requires precise control of each emitter's optical transition to generate indistinguishable photons for quantum networking. Here, we demonstrate a foundry-fabricated photonic integrated circuit (PIC) combining suspended silicon waveguides with a microelectromechanical (MEMS) cantilever to apply local strain and spectrally tune individual G-centers. Applying up to 35 V between the cantilever and the substrate induces a reversible wavelength shift of the zero-phonon line exceeding 100 pm, with no loss in brightness. Moreover, by modeling the strain-induced shifts with a digital twin physical model, we achieve vertical localization of color centers with sub-3 nm vertical resolution, directly correlating their spatial position, dipole orientation, and spectral behavior. This method enables on-demand, low-power control of emission spectrum and nanoscale localization of color centers, advancing quantum networks on a foundry-compatible platform.

physics.optics↗

arXiv2025

High-Fidelity Control of a Strongly Coupled Electro-Nuclear Spin-Photon Interface

Long distance quantum networking requires combining efficient spin-photon interfaces with long-lived local memories. Group-IV color centers in diamond (SiV, GeV, and SnV) are promising candidates for this application, containing an electronic spin-photon interface and dopant nuclear spin memory. Recent work has demonstrated state-of-the-art performance in spin-photon coupling and spin-spin entanglement. However, coupling between the electron and nuclear spins introduces a phase kickback during optical excitation that limits the utility of the nuclear memory. Here, we propose using the large hyperfine coupling of SnV-117 to operate the device at zero magnetic field in a regime where the memory is insensitive to optical excitation. We further demonstrate ground state spin control of a SnV-117 color center integrated in a photonic integrated circuit, showing 97.8% gate fidelity and 2.5 ms coherence time for the memory spin level. This shows the viability of the zero-field protocol for high fidelity operation, and lays the groundwork for building quantum network nodes with SnV-117 devices.

quant-ph↗

arXiv2025

End-to-end physics-based modeling of laser-activated color centers in silicon

Color centers are among the most promising candidates for quantum information processing. Central requirements for their practical applications include controlled and efficient local activation in nanophotonic devices and identical spectral features. However, producing color centers in a controlled and reliable way is inherently challenging due to the lack of comprehensive theoretical insights into their formation and the difficulty of streamlining the generation process for rapid in-situ optimization. We address these challenges by developing an end-to-end first-principles model that captures the underlying formation process of color centers. Emitters are activated through laser annealing, which allows for in-situ creation and the possibility of model-based control. Notably, our model enables the estimation of the emitters' inhomogeneous broadening down to 16 GHz in bare silicon, which translates into the creation of emitters with highly similar spectral properties. Finally, we address the challenge of in-situ deterministic activation of color centers in nanophotonic devices by going beyond bare silicon and demonstrating successful laser writing in photonic crystal optical cavities. These results lay the foundation for deterministic and large-scale integration of color centers within quantum photonic platforms.

physics.optics↗

arXiv2025

Large-Range Tuning and Stabilization of the Optical Transition of Diamond Tin-Vacancy Centers by In-Situ Strain Control

The negatively charged tin-vacancy (SnV-) center in diamond has emerged as a promising platform for quantum computing and quantum networks. To connect SnV- qubits in large networks, in-situ tuning and stabilization of their optical transitions are essential to overcome static and dynamic frequency offsets induced by the local environment. Here we report on the large-range optical frequency tuning of diamond SnV- centers using micro-electro-mechanically mediated strain control in photonic integrated waveguide devices. We realize a tuning range of >40 GHz, covering a major part of the inhomogeneous distribution. In addition, we employ real-time feedback on the strain environment to stabilize the resonant frequency and mitigate spectral wandering. These results provide a path for on-chip scaling of diamond SnV-based quantum networks.

quant-ph↗

arXiv2024

Single-photon detectors on arbitrary photonic substrates

Detecting non-classical light is a central requirement for photonics-based quantum technologies. Unrivaled high efficiencies and low dark counts have positioned superconducting nanowire single photon detectors (SNSPDs) as the leading detector technology for fiber and integrated photonic applications. However, a central challenge lies in their integration within photonic integrated circuits regardless of material platform or surface topography. Here, we introduce a method based on transfer printing that overcomes these constraints and allows for the integration of SNSPDs onto arbitrary photonic substrates. We prove this by integrating SNSPDs and showing through-waveguide single-photon detection in commercially manufactured silicon and lithium niobate on insulator integrated photonic circuits. Our method eliminates bottlenecks to the integration of high-quality single-photon detectors, turning them into a versatile and accessible building block for scalable quantum information processing.

quant-ph↗

arXiv2023

Heterogeneous integration of spin-photon interfaces with a scalable CMOS platform

Color centers in diamonds have emerged as a leading solid-state platform for advancing quantum technologies, satisfying the DiVincenzo criteria and recently achieving a quantum advantage in secret key distribution. Recent theoretical works estimate that general-purpose quantum computing using local quantum communication networks will require millions of physical qubits to encode thousands of logical qubits, which presents a substantial challenge to the hardware architecture at this scale. To address the unanswered scaling problem, in this work, we first introduce a scalable hardware modular architecture "Quantum System-on-Chip" (QSoC) that features compact two-dimensional arrays "quantum microchiplets" (QMCs) containing tin-vacancy (SnV-) spin qubits integrated on a cryogenic application-specific integrated circuit (ASIC). We demonstrate crucial architectural subcomponents, including (1) QSoC fabrication via a lock-and-release method for large-scale heterogeneous integration; (2) a high-throughput calibration of the QSoC for spin qubit spectral inhomogenous registration; (3) spin qubit spectral tuning functionality for inhomogenous compensation; (4) efficient spin-state preparation and measurement for improved spin and optical properties. QSoC architecture supports full connectivity for quantum memory arrays in a set of different resonant frequencies and offers the possibility for further scaling the number of solid-state physical qubits via larger and denser QMC arrays and optical frequency multiplexing networking.

quant-ph↗

arXiv2023

Tunable quantum emitters on large-scale foundry silicon photonics

Controlling large-scale many-body quantum systems at the level of single photons and single atomic systems is a central goal in quantum information science and technology. Intensive research and development has propelled foundry-based silicon-on-insulator photonic integrated circuits to a leading platform for large-scale optical control with individual mode programmability. However, integrating atomic quantum systems with single-emitter tunability remains an open challenge. Here, we overcome this barrier through the hybrid integration of multiple InAs/InP microchiplets containing high-brightness infrared semiconductor quantum dot single photon emitters into advanced silicon-on-insulator photonic integrated circuits fabricated in a 300~mm foundry process. With this platform, we achieve single photon emission via resonance fluorescence and scalable emission wavelength tunability through an electrically controlled non-volatile memory. The combined control of photonic and quantum systems opens the door to programmable quantum information processors manufactured in leading semiconductor foundries.

physics.optics↗

arXiv2023

Cavity-enhanced single artificial atoms in silicon

Artificial atoms in solids are leading candidates for quantum networks, scalable quantum computing, and sensing, as they combine long-lived spins with mobile and robust photonic qubits. The central requirements for the spin-photon interface at the heart of these systems are long spin coherence times and efficient spin-photon coupling at telecommunication wavelengths. Artificial atoms in silicon have a unique potential to combine the long coherence times of spins in silicon with telecommunication wavelength photons in the world's most advanced microelectronics and photonics platform. However, a current bottleneck is the naturally weak emission rate of artificial atoms. An open challenge is to enhance this interaction via coupling to an optical cavity. Here, we demonstrate cavity-enhanced single artificial atoms at telecommunication wavelengths in silicon. We optimize photonic crystal cavities via inverse design and show controllable cavity-coupling of single G-centers in the telecommunications O-band. Our results illustrate the potential to achieve a deterministic spin-photon interface in silicon at telecommunication wavelengths, paving the way for scalable quantum information processing.

quant-ph↗

arXiv2023

Individually Addressable and Spectrally Programmable Artificial Atoms in Silicon Photonics

Artificial atoms in solids have emerged as leading systems for quantum information processing tasks such as quantum networking, sensing, and computing. A central goal is to develop platforms for precise and scalable control of individually addressable artificial atoms that feature efficient optical interfaces. Color centers in silicon, such as the recently-isolated carbon-related 'G-center', exhibit emission directly into the telecommunications O-band and can leverage the maturity of silicon-on-insulator (SOI) photonics. Here, we demonstrate the generation, individual addressing, and spectral trimming of G-center artificial atoms in a SOI photonic integrated circuit (PIC) platform. Focusing on the neutral charge state emission at 1278nm, we observe waveguide-coupled single photon emission with an exceptionally narrow inhomogeneous distribution with standard deviation of 1.1nm, an excited state lifetime of 8.3$\pm$0.7ns, and no degradation after months of operation. In addition, we introduce a technique for optical trimming of spectral transitions up to 300 pm (55 GHz) and local deactivation of single artificial atoms. This non-volatile "spectral programming" enables the alignment of quantum emitters into 25 GHz telecommunication grid channels. Our demonstration opens the path to quantum information processing based on implantable artificial atoms in very large scale integrated (VLSI) photonics.

quant-ph↗

arXiv2022

MEMS for Photonic Integrated Circuits

The field of microelectromechanical Systems (MEMS) for photonic integrated circuits (PICs) is reviewed. This field leverages mechanics at the nanometer to micrometer scale to improve existing components and introduce novel functionalities in PICs. This review covers the MEMS actuation principles and the mechanical tuning mechanisms for integrated photonics. The state of the art of MEMS tunable components in PICs is quantitatively reviewed and critically assessed with respect to suitability for large-scale integration in existing PIC technology platforms. MEMS provide a powerful approach to overcome current limitations in PIC technologies and to enable a new design dimension with a wide range of applications.

physics.optics↗

arXiv2021

Scalable and High-Fidelity Quantum Random Access Memory in Spin-Photon Networks

A quantum random access memory (qRAM) is considered an essential computing unit to enable polynomial speedups in quantum information processing. Proposed implementations include using neutral atoms and superconducting circuits to construct a binary tree, but these systems still require demonstrations of the elementary components. Here, we propose a photonic integrated circuit (PIC) architecture integrated with solid-state memories as a viable platform for constructing a qRAM. We also present an alternative scheme based on quantum teleportation and extend it to the context of quantum networks. Both implementations rely on already demonstrated components: electro-optic modulators, a Mach-Zehnder interferometer (MZI) network, and nanocavities coupled to artificial atoms for spin-based memory writing and retrieval. Our approaches furthermore benefit from built-in error-detection based on photon heralding. Detailed theoretical analysis of the qRAM efficiency and query fidelity shows that our proposal presents viable near-term designs for a general qRAM.

quant-ph↗

arXiv2020

Reconfigurable quantum photonics with on-chip detectors

Integrated quantum photonics offers a promising path to scale up quantum optics experiments by miniaturizing and stabilizing complex laboratory setups. Central elements of quantum integrated photonics are quantum emitters, memories, detectors, and reconfigurable photonic circuits. In particular, integrated detectors not only offer optical readout but, when interfaced with reconfigurable circuits, allow feedback and adaptive control, crucial for deterministic quantum teleportation, training of neural networks, and stabilization of complex circuits. However, the heat generated by thermally reconfigurable photonics is incompatible with heat-sensitive superconducting single-photon detectors, and thus their on-chip co-integration remains elusive. Here we show low-power microelectromechanical reconfiguration of integrated photonic circuits interfaced with superconducting single-photon detectors on the same chip. We demonstrate three key functionalities for photonic quantum technologies: 28 dB high-extinction routing of classical and quantum light, 90 dB high-dynamic range single-photon detection, and stabilization of optical excitation over 12 dB power variation. Our platform enables heat-load free reconfigurable linear optics and adaptive control, critical for quantum state preparation and quantum logic in large-scale quantum photonics applications.

physics.app-ph↗

arXiv2020

Resonance fluorescence from waveguide-coupled strain-localized two-dimensional quantum emitters

Efficient on-chip integration of single-photon emitters imposes a major bottleneck for applications of photonic integrated circuits in quantum technologies. Resonantly excited solid-state emitters are emerging as near-optimal quantum light sources, if not for the lack of scalability of current devices. Current integration approaches rely on cost-inefficient individual emitter placement in photonic integrated circuits, rendering applications impossible. A promising scalable platform is based on two-dimensional (2D) semiconductors. However, resonant excitation and single-photon emission of waveguide-coupled 2D emitters have proven to be elusive. Here, we show a scalable approach using a silicon nitride photonic waveguide to simultaneously strain-localize single-photon emitters from a tungsten diselenide (WSe2) monolayer and to couple them into a waveguide mode. We demonstrate the guiding of single photons in the photonic circuit by measuring second-order autocorrelation of g$^{(2)}(0)=0.150\pm0.093$ and perform on-chip resonant excitation yielding a g$^{(2)}(0)=0.377\pm0.081$. Our results are an important step to enable coherent control of quantum states and multiplexing of high-quality single photons in a scalable photonic quantum circuit.

physics.app-ph↗

arXiv2020

Three-dimensional printing of silica-glass structures with submicrometric features

Humanity's interest in manufacturing silica-glass objects extends back over three thousand years. Silica glass is resistant to heating and exposure to many chemicals, and it is transparent in a wide wavelength range. Due to these qualities, silica glass is used for a variety of applications that shape our modern life, such as optical fibers in medicine and telecommunications. However, its chemical stability and brittleness impede the structuring of silica glass, especially on the small scale. Techniques for three-dimensional (3D) printing of silica glass, such as stereolithography and direct ink writing, have recently been demonstrated, but the achievable minimum feature size is several tens of micrometers. While submicrometric silica-glass structures have many interesting applications, for example in micro-optics, they are currently manufactured using lithography techniques, which severely limits the 3D shapes that can be realized. Here, we show 3D printing of optically transparent silica-glass structures with submicrometric features. We achieve this by cross-linking hydrogen silsesquioxane to silica glass using nonlinear absorption of laser light followed by the dissolution of the unexposed material. We print a functional microtoroid resonator with out-of-plane fiber couplers to demonstrate the new possibilities for designing and building silica-glass microdevices in 3D.

physics.app-ph↗

arXiv2020

Carbon dioxide absorption spectroscopy with a mid-infrared silicon photonic waveguide

Carbon dioxide is a vital gas for life on Earth, a waste product of human activities, and widely used in agriculture and industry. Its accurate sensing is therefore of great interest. Optical sensors exploiting the mid-infrared light absorption of CO$_{\mathrm{2}}$ provide high selectivity, but their large size and high cost limit their use. Here, we demonstrate CO$_{\mathrm{2}}$ gas sensing at 4.2 $μ$m wavelength using an integrated silicon waveguide, featuring a sensitivity to CO$_{\mathrm{2}}$ of 44 % that of free-space sensing. The suspended waveguide is fabricated on a silicon-on-insulator substrate by a single-lithography-step process, and we route it into a mid-infrared photonic circuit for on-chip-referenced gas measurements. Its demonstrated performance and its simple and scalable fabrication make our waveguide ideal for integration in miniaturized CO$_{\mathrm{2}}$ sensors for distributed environmental monitoring, personal safety, medical, and high-volume consumer applications.

physics.app-ph↗

arXiv2019

Low-power optical beam steering by microelectromechanical waveguide gratings

Optical beam steering is key for optical communications, laser mapping (LIDAR), and medical imaging. For these applications, integrated photonics is an enabling technology that can provide miniaturized, lighter, lower cost, and more power efficient systems. However, common integrated photonic devices are too power demanding. Here, we experimentally demonstrate, for the first time, beam steering by microelectromechanical (MEMS) actuation of a suspended silicon photonic waveguide grating. Our device shows up to 5.6° beam steering with 20 V actuation and a power consumption below the $μ$W level, i.e. more than 5 orders of magnitude lower power consumption than previous thermo-optic tuning methods. The novel combination of MEMS with integrated photonics presented in this work lays ground for the next generation of power-efficient optical beam steering systems.

physics.app-ph↗