Searcharxiv⌕ Search

arXiv subjects

Carlos González

Publications and source records attributed to Carlos González.

12 recordsLinked to original sources

HoneySat: A Network-based Satellite Honeypot Framework

Satellites are the backbone of several mission-critical services that enable our modern society to function, for example, GPS. For years, satellites were assumed to be secure because of their indecipherable architectures and the reliance on security by obscurity. However, technological advancements have made these assumptions obsolete, paving the way for potential attacks, and sparking interest in satellite security. Unfortunately, to this day, there is no efficient way to collect data on adversarial techniques for satellites, hurting the generation of security intelligence that can lead to the development of effective countermeasures. In this paper, we present HoneySat, the first high-interaction satellite honeypot framework, fully capable of convincingly simulating a real-world CubeSat, a type of Small Satellite (SmallSat). To provide evidence of HoneySat's effectiveness, we surveyed experienced SmallSat operators in charge of in-orbit satellites and deployed HoneySat over the Internet to entice adversaries. Our results show that 90% of satellite operators agreed that HoneySat provides a realistic and engaging simulation of a SmallSat mission. Additionally, HoneySat successfully deceived human adversaries in the wild and collected 22 real-world satellite-specific adversarial interactions. Finally, in a major demonstration of HoneySat's robustness, we collaborated with an aerospace company to perform a hardware-in-the-loop operation that resulted in HoneySat successfully communicating with an in-orbit, operational SmallSat mission.

cs.CR↗

Dispersive and kinetic effects on kinked Alfvén wave packets: a comparative study with fluid and hybrid models

We investigate dispersive and kinetic effects on the evolution of a two-dimensional kinked Alfvén wave packet by comparing results from MHD, Hall-MHD and hybrid simulations of a low-$β$ plasma. We find that the Hall term determines the overall evolution of the wave packet over a characteristic time $τ^*=τ_a\ell/d_i$ in both fluid and hybrid models. Dispersion of the wave packet leads to the conversion of the wave energy into internal plasma energy. When kinetic protons are considered, the proton internal energy increase has contributions from both plasma compressions and phase space mixing. The latter occurs in the direction parallel to the guiding mean magnetic field, due to protons resonating at the Alfvén speed with a compressible mode forced by the wave packet. Implications of our results for switchbacks observations and solar wind energetics are discussed.

astro-ph.SR↗

Bioabsorbable WE43 Mg alloy wires modified by continuous plasma electrolytic oxidation for implant applications. Part II: degradation and biological performance

The corrosion, mechanical degradation and biological performance of cold-drawn WE43 Mg wires were analyzed as a function of thermo-mechanical processing and the presence of a protective oxide layer created by continuous plasma electrolytic oxidation (PEO). It was found that the corrosion properties of the non-surface-treated wire could be optimized by means of thermal treatment within certain limits, but the corrosion rate remained very high. Hence, strength and ductility of these wires vanished after 24 h of immersion in simulated body fluid at 37$^\circ$C and, as a result of that rather quick degradation, direct tests did not show any MC3T3-E1 preosteoblast cell attachment on the surface of the Mg wires. In contrast, surface modification of the annealed WE43 Mg wires by a continuous PEO process led to the formation of a homogeneous oxide layer of $\approx$ 8$μ$m and significantly improved the corrosion resistance and hence the biocompatibility of the WE43 Mg wires. It was found that a dense layer of Ca/P was formed at the early stages of degradation on top of the Mg(OH)2 layer and hindered the diffusion of the Cl-ions which dissolve Mg(OH)2 and accelerate the corrosion of Mg alloys. As a result, pitting corrosion was suppressed and the strength of the Mg wires was above 100 MPa after 96 h of immersion in simulated body fluid at 37$^\circ$C. Moreover, many cells were able to attach on the surface of the PEO surface-modified wires during cell culture testing. These results demonstrate the potential of thin Mg wires surface-modified by continuous PEO in terms of mechanical, degradation and biological performance for bioabsorbable wire-based devices.

cond-mat.mtrl-sci↗

Bioabsorbable WE43 Mg alloy wires modified by continuous plasma-electrolytic oxidation for implant applications. Part I: processing, microstructure and mechanical properties

In our work, a novel processing strategy for the continuous fabrication and surface modification of wires from Magnesium alloy WE43 by means of plasma-electrolytic oxidation (PEO) is presented. In the first step, wires with a strong basal texture and small grain size ($\approx$ 1 $μ$m) were manufactured by combined cold drawing and in-line stress-relief heat treatment steps that optimized the mechanical properties (in terms of strength and ductility) by means of annealing. In a second step, and to the best of our knowledge for the first time ever, the wires were continuously surface-modified with a novel plasma electrolytic oxidation process, which was able to create a homogeneous porous oxide layer made of MgO and Mg$_3$(PO4)$_2$ on the wire surface. While the oxide layer slightly diminished the tensile properties, the strength of the surface-modified wires could be maintained close to 300 MPa with a strain-to-failure $\approx$ 8\%. Furthermore, the thickness of the oxide layer could be controlled by immersion time within the electrolytic bath and was adjusted to realize a thicknesses of $\approx$ 8 $μ$m, which could be obtained in $<$ 20 s. Our experiments showed that the chemical composition, morphology and porosity of the oxide layer could be tailored by changing electrical parameters. The combined cold drawing and heat treatment process with additional continuous plasma electrolytic oxidation processing can be upscaled to produce a novel generation of bioabsorbable Mg wires with optimized mechanical, degradation and biological performance for use in biomedical applications.

physics.med-ph↗

Self-similar cosmological solutions in f(R,T) gravity theory

We study the $f(R,T)$ cosmological models under the self-similarity hypothesis. We determine the exact form that each physical and geometrical quantity may take in order that the Field Equations (FE) admit exact self-similar solutions through the matter collineation approach. We study two models: the case$\ f(R,T)=f_{1}(R)+f_{2}(T)$ and the case $f(R,T)=f_{1}(R)+f_{2} (R)f_{3}(T)$. In each case, we state general theorems which determine completely the form of the unknown functions $f_{i}$ such that the field equations admit self-similar solutions. We also state some corollaries as limiting cases. These results are quite general and valid for any homogeneous self-similar metric$.$ In this way, we are able to generate new cosmological scenarios. As examples, we study two cases by finding exact solutions to these particular models.

astro-ph.CO↗

Simulation of corrosion and mechanical degradation of additively manufactured Mg scaffolds in simulated body fluid

A simulation strategy based in the finite element model was developed to model the corrosion and mechanical properties of biodegradable Mg scaffolds manufactured by laser power bed fusion after immersion in simulated body fluid. Corrosion was simulated through a phenomenological, diffusion-based model which can take into account pitting. The elements in which the concentration of Mg was below a certain threshold (representative of the formation of Mg(OH)2) after the corrosion simulation were deleted for the mechanical simulations, in which Mg was assumed to behave as an isotropic, elastic-perfectly plastic solid and fracture was introduced through a ductile failure model. The parameters of the models were obtained from previous experimental results and the numerical predictions of the strength and fracture mechanisms of WE43 Mg alloy porous scaffolds in the as-printed condition and after immersion in simulated body fluid were in good agreement with the experimental results. Thus, the simulation strategy is able to assess the effect of corrosion on the mechanical behavior of biodegradable scaffolds, which is critical for design of biodegradable scaffolds for biomedical applications.

physics.app-ph↗

Strength, corrosion resistance and cellular response of interfaces in bioresorbable poly-lactic acid/Mg fiber composites for orthopedic applications

The shear strength and the corrosion resistance of the fiber/matrix interface after immersion in simulated body fluid was studied in poly-lactic acid/Mg fiber composites. The shear strength of the interface was measured by means of push-out tests in thin slices of the composite perpendicular to the fibers. It was found that the interface strength dropped from 15.2 \pm 1.4 MPa to 7.8 \pm 3.7 MPa after the composite was immersed in simulated body fluid for 148 hours. The reduction of the interface strength was associated to the fast corrosion of the fibers as water diffused to the interface through the polymer. The expansion of the fibers due to the formation of corrosion products was enough to promote radial cracks in the polymer matrix which facilitate the ingress of water and the development of corrosion pitting in the fibers. Moreover, cell culture testing on the material showed that early degradation of the Mg fibers affected the proliferation of pre-osteoblasts near the Mg fibers due to the local changes in the environment produced by the fiber corrosion. Thus, surface modification of Mg fibers to delay degradation seems to be a critical point for further development of Mg/PLA composites for biomedical applications.

physics.med-ph↗

Understanding interlaminar toughening of unidirectional CFRP laminates with carbon nanotube veils

The introduction of nanostructured interlayers is one of the most promising strategies for interlaminar reinforcement in structural composites. In this work, we study the failure mechanism and interlayer microstructure of aerospace-grade structural composites reinforced with thin veils of carbon nanotube produced using an industrialised spinning process. Samples of unidirectional carbon fibre/epoxy matrix composites interleaved with different composition CNT veils were prepared using hot press method and tested for interlaminar fracture toughness (IFT), measured in Mode-I (opening) and Mode-II (in-plane shear), and for interlaminar shear strength (ILSS), evaluated by the short beam shear (SBS) test. The crack propagation mode could be directly determined through fractography analysis by electron microscopy and resin/CNT spatial discrimination by Raman spectroscopy, showing a clear correlation between interlaminar reinforcement and the balance between cohesive/adhesive failure mode at the interlayer region. Composites with full resin infiltration of the CNT veils give a large increase of Mode II IFT (88%) to 1500 J/m2 and a slight enhancement of apparent interlaminar shear strength (6.5%), but a decrease of Mode I IFT (-21%). The results help establish the role of interlayer infiltration, interlaminar crossings and formation of a carbon fibre bridgings, for interlaminar reinforcement with interleaves.

cond-mat.mtrl-sci↗

Damage-tolerant, laminated structural supercapacitor composites enabled by integration of carbon nanotube fibres

A natural embodiment for multifunctional materials combining energy-storing capabilities and structural mechanical properties are layered structures, similar to both laminate structural composites and electrochemical energy storage devices. A structural composite with integrated electric double layer capacitive storage is produced by resin infusion of a lay up including woven glass fabric used as mechanical reinforcement, carbon nanotube non-woven fabrics as electrodes/current collectors and a polymer electrolyte. The energy-storing layer is patterned with holes, which after integration form resin plugs for mechanical interconnection between layers, similar to rivets. Finite element modelling is used to optimise rivet shape and areal density on interlaminar shear properties. Galvanostatic charge discharge tests during three point bending show no degradation of properties after large deflections or repeated load/unload cycling at 3.5 V.This mechanical tolerance is a consequence of the elimination of metallic current collectors and the effective integration of multifunctional materials, as observed by electron microscopy and X-ray computed tomography. In contrast, control samples with metallic current collectors, analogous to embedded devices, rapidly degrade upon repeated bending.

cond-mat.mtrl-sci↗

Reconstruction and exact solutions for cosmological perturbations from a generalized gravity theory

Scalar and tensor cosmological perturbations during an inflationary universe scenario in the context of the a generalized gravity theory are studied. This analyze is carried out considering an ansatz on the variables associated to scalar and tensor perturbation ($z_s$ and $z_t$) in the Jordan frame. In this context, we analyze two different Ansatze for the ratio $z_s/z_t$, and we study in great detail the analytical and exact solutions for the cosmological perturbations together with the corresponding reconstruction of the background variables. Recent observational data from the Planck 2018 results are employed to constrain the parameters of each of the models.

gr-qc↗

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

The susceptibility to delamination is one of the main concerns in fiber reinforced polymer composites (FRPs). This work demonstrates improvements of 60% in Mode-I fracture toughness after integration of thin (~30 micron), continuous veils of carbon nanotubes (CNTs) directly deposited onto carbon fiber fabric as the CNT are drawn from the gas-phase using a semi-industrial process. A combination of optical imaging, scanning electron microscopy and a Raman spectroscopy provide a new rapid tool to unambiguously determine the crack propagation path by simple visual inspection of fracture surface. The results show that interlaminar crossing between CNT veil/CF interfaces is of paramount importance. The crack front alternatingly propagates above and below the CNT-toughened interlayer, significantly improving the fracture toughness of resultant laminates. This mechanism is strongly influenced by the method used to integrate the veils onto the CF. CNT veils directly deposited onto the fabrics as a low-density layer lead to large improvements in interlaminar properties, whereas compact CNT veils densified by solvent exposure prior to their integration in the lay-up act as defects.

physics.app-ph↗

Bernstein--Doetsch type theorems for set-valued maps of strongly and approximately convex and concave type

In this paper, we investigate properties of set-valued mappings that establish connection between the values of this map at two arbitrary points of the domain and the value at their midpoint. Such properties are, for instance, Jensen convexity/concavity, $K$-Jensen convexity/concavity (where $K$ is the set of nonnegative elements of an ordered vector space), and approximate/strong $K$-Jensen convexity/concavity. Assuming weak but natural regularity assumptions on the set-valued map, our main purpose is to deduce the convexity/concavity consequences of these properties in the appropriate sense. Our two main theorems will generalize most of the known results in this field, in particular the celebrated Bernstein--Doetsch Theorem from 1915, and thus they offer a unified view of these theories.

math.CA↗