arXiv subjects

Carolyn G. Volpert

Publications and source records attributed to Carolyn G. Volpert.

7 recordsLinked to original sources

arXiv2026

The EDGE-CALIFA Survey: Star Formation Efficiency and Galaxy Quenching across 62 Main Sequence, Green Valley, and Red Galaxies

We present GBT-EDGE, a new CO(1-0) survey using the Green Bank Telescope to map 62 nearby (10-140 Mpc) galaxies spanning the star-forming main sequence (SFMS), green valley, and red sequence. The galaxy sample is selected from the CALIFA survey with integral field spectroscopy (IFS), which provides a representative census of local galactic environments. Combining the CO dataset with CALIFA's optical IFS measurements, we derive molecular gas masses, star formation rates (SFR), metallicities, and stellar mass densities to measure star formation efficiency (SFE) and investigate the physical drivers of galaxy quenching. We obtain a median molecular gas depletion time of $2.10^{+2.35}_{-1.31}$, $6.90^{+17.00}_{-3.67}$, and $127.7^{+201.6}_{-113.4}$ Gyr for our sample of main sequence, green valley, and red galaxies, respectively, assuming a Galactic CO-to-H2 conversion factor. By applying various conversion factor prescriptions, we also confirm a systematic decrease of SFE with galaxy's offset below the SFMS, regardless of the adopted prescription. This suggests that the low SFR in some quenched galaxies is primarily driven by suppressed SFE rather than an absence of molecular gas. Our results provide evidence that galaxies below the main sequence can retain substantial molecular gas reservoirs comparable to star-forming galaxies, but they exhibit longer depletion times and form stars inefficiently, possibly due to the combined effects of low gas density and morphological quenching mechanisms.

astro-ph.GA↗

arXiv2026

TLS and Quasiparticle Loss in Thin-Film Aluminum CPW Resonators: A Modified Model and Design Implications

As superconducting kinetic inductance detectors (KIDs) continue to grow in popularity for sensitive submillimeter detection and other applications, there is a drive to advance toward lower-loss devices. We present measurements of diagnostic thin-film aluminum coplanar waveguide (CPW) resonators designed to inform ongoing KID development at NASA Goddard Space Flight Center. The resonance frequencies span $f_0$ = 3.5-4 GHz and include quarter-wave and half-wave resonators with varying coupling capacitor designs. We present measurements of the device film properties and an analysis of the dominant mechanisms of loss in the resonators measured in a dark environment, demonstrating quality factors of $Q_i^{-1} \approx 3.64-8.57\ \times 10^{-8}$. We observe an enhanced level of suppression in the loss contributions from two-level systems (TLS) at intermediate-to-high read powers, and a regime at these powers and low temperatures where contributions from intrinsic processes $Q_i^{-1}$,other dominate the total loss. We also observe deviations from the standard TLS loss model at low powers and temperatures below 60 mK, and use a modified model to describe this behavior.

physics.ins-det↗

arXiv2024

Superfluid-tight cryogenic receiver with continuous sub-Kelvin cooling for EXCLAIM

The EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) is a balloon-borne telescope designed to survey star formation over cosmological time scales using intensity mapping in the 420 - 540 GHz frequency range. EXCLAIM uses a fully cryogenic telescope coupled to six on-chip spectrometers featuring kinetic inductance detectors (KIDs) to achieve high sensitivity, allowing for fast integration in dark atmospheric windows. The telescope receiver is cooled to $\approx$ 1.7 K by immersion in a superfluid helium bath and enclosed in a superfluid-tight shell with a meta-material anti-reflection coated silicon window. In addition to the optics and the spectrometer package, the receiver contains the magnetic shielding, the cryogenic segment of the spectrometer readout, and the sub-Kelvin cooling system. A three-stage continuous adiabatic demagnetization refrigerator (CADR) keeps the detectors at 100 mK while a $^4$He sorption cooler provides a 900 mK thermal intercept for mechanical suspensions and coaxial cables. We present the design of the EXCLAIM receiver and report on the flight-like testing of major receiver components, including the superfluid-tight receiver window and the sub-Kelvin coolers.

astro-ph.IM↗

arXiv2023

Optimization of an Optical Testbed for Characterization of EXCLAIM u-Spec Integrated Spectrometers

We describe a testbed to characterize the optical response of compact superconducting on-chip spectrometers in development for the Experiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) mission. EXCLAIM is a balloonborne far-infrared experiment to probe the CO and CII emission lines in galaxies from redshift 3.5 to the present. The spectrometer, called u-Spec, comprises a diffraction grating on a silicon chip coupled to kinetic inductance detectors (KIDs) read out via a single microwave feedline. We use a prototype spectrometer for EXCLAIM to demonstrate our ability to characterize the spectrometers spectral response using a photomixer source. We utilize an on-chip reference detector to normalize relative to spectral structure from the off-chip optics and a silicon etalon to calibrate the absolute frequency.

astro-ph.IM↗

arXiv2023

CO Excitation in High-z Main Sequence Analogues: Resolved CO(4-3)/CO(3-2) Line Ratios in DYNAMO Galaxies

The spectral line energy distribution of carbon monoxide contains information about the physical conditions of the star forming molecular hydrogen gas; however, the relation to local radiation field properties is poorly constrained. Using ~ 1-2 kpc scale ALMA observations of CO(3-2) and CO(4-3), we characterize the CO(4-3)/CO(3-2) line ratios of local analogues of main sequence galaxies at z ~ 1-2, drawn from the DYNAMO sample. We measure CO(4-3)/CO(3-2) across the disk of each galaxy and find a median line ratio of $R_{43} = 0.54^{+0.16}_{-0.15}$ for the sample. This is higher than literature estimates of local star-forming galaxies and is consistent with multiple lines of evidence that indicate DYNAMO galaxies, despite residing in the local Universe, resemble main-sequence galaxies at z ~ 1-2. Comparing to existing lower resolution CO(1-0) observations, we find $R_{41}$ and $R_{31}$ values in the range $\sim 0.2-0.3$ and $\sim 0.4-0.8$ respectively. We combine our kpc-scale resolved line ratio measurements with HST observations of H$α$ to investigate the relation to star formation rate surface density and compare this relation to expectations from models. We find increasing CO(4-3)/CO(3-2) with increasing star formation rate surface density; however, models over-predict the line ratios across the range of star formation rate surface densities we probe, particularly at the lower range. Finally, SOFIA observations with HAWC+ and FIFI-LS reveal low dust temperatures and no deficit of [CII] emission with respect to the total infrared luminosity.

astro-ph.GA↗

arXiv2022

Developing a New Generation of Integrated Micro-Spec Far Infrared Spectrometers for the EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM)

The current state of far-infrared astronomy drives the need to develop compact, sensitive spectrometers for future space and ground-based instruments. Here we present details of the $\rm μ$-Spec spectrometers currently in development for the far-infrared balloon mission EXCLAIM. The spectrometers are designed to cover the $\rm 555 - 714\ μ$m range with a resolution of $\rm R\ =\ λ/ Δλ =\ 512$ at the $\rm 638\ μ$m band center. The spectrometer design incorporates a Rowland grating spectrometer implemented in a parallel plate waveguide on a low-loss single-crystal Si chip, employing Nb microstrip planar transmission lines and thin-film Al kinetic inductance detectors (KIDs). The EXCLAIM $\rm μ$-Spec design is an advancement upon a successful $\rm R = 64\ μ$-Spec prototype, and can be considered a sub-mm superconducting photonic integrated circuit (PIC) that combines spectral dispersion and detection. The design operates in a single $M{=}2$ grating order, allowing one spectrometer to cover the full EXCLAIM band without requiring a multi-order focal plane. The EXCLAIM instrument will fly six spectrometers, which are fabricated on a single 150 mm diameter Si wafer. Fabrication involves a flip-wafer-bonding process with patterning of the superconducting layers on both sides of the Si dielectric. The spectrometers are designed to operate at 100 mK, and will include 355 Al KID detectors targeting a goal of NEP ${\sim}8\times10^{-19}$ $\rm W/\sqrt{Hz}$. We summarize the design, fabrication, and ongoing development of these $\rm μ$-Spec spectrometers for EXCLAIM.

astro-ph.IM↗

arXiv2021

μ-Spec Spectrometers for the EXCLAIM Instrument

The EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) is a cryogenic balloon-borne instrument that will map carbon monoxide and singly-ionized carbon emission lines across redshifts from 0 to 3.5, using an intensity mapping approach. EXCLAIM will broaden our understanding of these elemental and molecular gases and the role they play in star formation processes across cosmic time scales. The focal plane of EXCLAIM's cryogenic telescope features six μ-Spec spectrometers. μ-Spec is a compact, integrated grating-analog spectrometer, which uses meandered superconducting niobium microstrip transmission lines on a single-crystal silicon dielectric to synthesize the grating. It features superconducting aluminum microwave kinetic inductance detectors (MKIDs), also in a microstrip architecture. The spectrometers for EXCLAIM couple to the telescope optics via a hybrid planar antenna coupled to a silicon lenslet. The spectrometers operate from 420 to 540 GHz with a resolving power R=λ/Δλ=512 and employ an array of 355 MKIDs on each spectrometer. The spectrometer design targets a noise equivalent power (NEP) of 2x10-18W/\sqrt{Hz} (defined at the input to the main lobe of the spectrometer lenslet beam, within a 9-degree half width), enabled by the cryogenic telescope environment, the sensitive MKID detectors, and the low dielectric loss of single-crystal silicon. We report on these spectrometers under development for EXCLAIM, providing an overview of the spectrometer and component designs, the spectrometer fabrication process, fabrication developments since previous prototype demonstrations, and the current status of their development for the EXCLAIM mission.

astro-ph.IM↗