arXiv subjects

Carolyn Kierans

Publications and source records attributed to Carolyn Kierans.

At least 19 recordsLinked to original sources

arXiv2026

Beam Test Performance of AstroPix sensor with 120 GeV protons

AstroPix is a high-voltage CMOS (HV-CMOS) monolithic active pixel sensor (MAPS) developed for precision gamma-ray imaging and spectroscopy in the medium energy regime, as well as for precise shower imaging and tracking in the Barrel Imaging Calorimeter (BIC) of the Electron Proton/Ion Collider (ePIC) detector at the future Electron-Ion Collider (EIC). We present beam test results of the AstroPix v3 sensor using a 120 GeV proton beam at the Fermilab Test Beam Facility (FTBF), performed as part of the broader experimental campaign for the BIC prototype calorimeter. The sensor's 500 um pixel pitch enabled precise measurement of the beam profile, providing important information for calorimeter performance studies. Using the measured 120 GeV proton data, we measure the energy deposit of minimum ionizing particles and use them to extract the corresponding effective depletion depth.

physics.ins-det↗

arXiv2026

Depth Calibration of Double-sided Strip Germanium Detectors for the Compton Spectrometer and Imager Satellite

Double-sided strip high-purity germanium detectors with three-dimensional position reconstruction capability have been developed over three decades, with space-based applications in high-energy astrophysics and heliophysics. Position resolution in three dimensions is key to reconstruction of Compton scattering events, including for the upcoming Compton Spectrometer and Imager (COSI) satellite mission. Two-dimensional position reconstruction is enabled by segmentation of the two detector faces into orthogonal strip contacts, enabling a pixelized analysis. The depth of an interaction cannot be measured directly but must be inferred from the charge collection time difference between the two faces of the detector. Here, we demonstrate for the first time the depth calibration of a detector with the COSI satellite geometry read out using an application specific integrated circuit (ASIC) developed for the COSI mission. In this work, we map collection time difference to depth using the Julia-based simulation package SolidStateDetectors$.$jl and validate it with comparison to the timing distributions observed in data. We also use simulations and data to demonstrate the depth resolution on a per-pixel basis, with >90% of pixels having <0.9 mm (FWHM) resolution at 59.5 keV and <0.6 mm (FWHM) resolution at 122.1 keV.

astro-ph.IM↗

arXiv2026

In-orbit Spectral Calibration Prospects for the COSI Space Telescope

The Compton Spectrometer and Imager is an upcoming NASA space telescope in the MeV range. COSI's primary science goals include precisely mapping nuclear line and positron annihilation emission in the Milky Way galaxy through Compton imaging. This relies on our ability to maintain COSI's spectral performance over its mission lifetime. Changes to the detectors' gain characteristics over time will result in a non-linear stretching of the entire energy range. Moreover, observations from past MeV telescopes and proton-beam experiments have shown that radiation damage in space causes photopeak shifts and spectral line broadening. These necessitate a plan for regular, in-orbit calibration. In this study, we demonstrate a method to monitor and recalibrate the COSI detectors using background line emissions produced by the space radiation environment. We employ Monte Carlo simulations of particle background and show that strong background lines arise from nuclear excitation of COSI's detectors (germanium) and cryostat (aluminum) materials. These span COSI's entire bandwidth for single-site interactions and can be used to monitor the effects of radiation damage and gain shifts every eight hours at the full instrument level and every 24 days at the individual detector level. Methods developed by Pike et al. to correct the effects of hole trapping and gain characteristics can then be applied to recover the original spectral performance. These results inform COSI's telemetry requirements for calibration and housekeeping data, and rule out the need for an on-board radioactive calibration source which would have increased the complexity of the spacecraft.

astro-ph.IM↗

arXiv2026

Pre-flight Background Estimates for COSI

The Compton Spectrometer and Imager (COSI) is a Compton telescope designed to survey the 0.2 - 5 MeV sky, consisting of a compact array of cross-strip germanium detectors. It is planned to be launched in 2027 into an equatorial low-Earth (530 km) orbit with a prime mission duration of 2 years. The observation of MeV gamma rays is dominated by background, mostly from extragalactic and atmospheric photon but also from the activation of the detector materials induced by cosmic-ray interactions. Thus, background simulation and identification are crucial for the data analysis. In this work we perform Monte Carlo simulations of the background for the first 3 months in orbit, and we extrapolate the results to 2 years in orbit, in order to determine the build-up of the activation due to long-lived isotopes. We determine the rates of events induced by the background that are reconstructed as Compton events in the simulated COSI data. We find that the extragalactic background photons dominate at low energies (<660 keV), while delayed activation from cosmic-ray primaries (proton/alpha) and albedo photons dominate at higher energies. As part of this work, a comparison at low latitude (<1 deg) between recent measurement of the SAA by the High-Energy Particle Detector (HEPD-01) on board the China Seismo-Electromagnetic Satellite (CSES-01) and the AP9/AE9 model has been made, showing an overestimation of the flux by a factor 9 by the model. The systematic uncertainties associated with these components are quantified. This work marks a major step forward in estimating and understanding the expected background rates for the COSI satellite mission.

astro-ph.IM↗

arXiv2025

AstroPix: A Pixelated HVCMOS Sensor for Space-Based Gamma-Ray Measurement

A next-generation medium-energy gamma-ray telescope targeting the MeV range would address open questions in astrophysics regarding how extreme conditions accelerate cosmic-ray particles, produce relativistic jet outflows, and more. One concept, AMEGO-X, relies upon the mission-enabling CMOS Monolithic Active Pixel Sensor silicon chip AstroPix. AstroPix is designed for space-based use, featuring low noise, low power consumption, and high scalability. Desired performance of the device include an energy resolution of 5 keV (or 10% FWHM) at 122 keV and a dynamic range per-pixel of 25-700 keV, enabled by the addition of a high-voltage bias to each pixel which supports a depletion depth of 500 um. This work reports on the status of the AstroPix development process with emphasis on the current version under test, version three (v3), and highlights of version two (v2). Version 3 achieves energy resolution of 10.4 +/- 3.2% at 59.5 keV and 94 +/- 6 um depletion in a low-resistivity test silicon substrate.

astro-ph.IM↗

arXiv2025

Calibration of the ComPair Balloon Instrument

ComPair, the prototype of the All-sky Medium Energy Gamma-ray Observatory (AMEGO) mission concept, is a combined Compton imager and pair production telescope. It consists of four subsystems: a double-sided silicon strip detector (DSSD) Tracker, a virtual Frisch-grid cadmium zinc telluride (CZT) Low Energy Calorimeter, a cesium iodide (CsI) High Energy Calorimeter, and a plastic scintillator Anti-Coincidence Detector (ACD) to reject the charged particle background. These subsystems work together to reconstruct events, by tracking the locations and energies of gamma-ray scatters and pair production events. To quantify ComPair's scientific capabilities prior to a balloon launch in 2023, calibrations were performed to benchmark the instrument's performance in terms of angular resolution, energy resolution, and effective area. In this paper we provide an overview of the ComPair instrument and detail the calibration campaign. Finally, we compare our results to the expected performance based on simulations.

astro-ph.IM↗

arXiv2025

GRB 250702B: Discovery of a Gamma-Ray Burst from a Black Hole Falling into a Star

Gamma-ray bursts are the most luminous electromagnetic events in the universe. Their prompt gamma-ray emission has typical durations between a fraction of a second and several minutes. A rare subset of these events have durations in excess of a thousand seconds, referred to as ultra-long gamma-ray bursts. Here, we report the discovery of the longest gamma-ray burst ever seen with a ~25,000 s gamma-ray duration, GRB 250702B, and characterize this event using data from four instruments in the InterPlanetary Network and the Monitor of All-sky X-ray Image. We find a hard spectrum, subsecond variability, and high total energy, which are only known to arise from ultrarelativistic jets powered by a rapidly-spinning stellar-mass central engine. These properties and the extreme duration are together incompatible with all confirmed gamma-ray burst progenitors and nearly all models in the literature. This burst is naturally explained with the helium merger model, where a field binary ends when a black hole falls into a stripped star and proceeds to consume and explode it from within. Under this paradigm, GRB 250702B adds to the growing evidence that helium stars expand and that some ultra-long GRBs have similar evolutionary pathways as collapsars, stellar-mass gravitational wave sources, and potentially rare types of supernovae.

astro-ph.HE↗

arXiv2025

Evaluation of gamma-ray response of the AstroPix4 HV-CMOS active pixel sensor

AstroPix is a novel high-voltage CMOS active pixel sensor being developed for a next generation gamma-ray space telescope, AMEGO-X. To meet AMEGO-X instrument requirements, AstroPix must achieve full depletion of its $500~\rm{μm}$ thick, $500~\rm{μm}$-pitch pixels. It must be sensitive to gamma rays in the range of $25-700$ keV, with the energy resolution at 122 keV of $<10$%. Furthermore, given the space-based nature of AMEGO-X, the power consumption of AstroPix needs to be lower than $1.5~\rm{mW/{cm}^2}$. We report the gamma-ray response of the latest version of AstroPix, AstroPix4. The chip contains $16\times 13$ array of $500~\rm{μm}$-pitch pixels. The power consumption is estimated to be about $2~\rm{mW/{cm}^2}$, which is approximately half the power of the previous AstroPix version. The input capacitance is reduced, allowing for the detection of the 14 keV photopeak from $\rm{^{57}Co}$ and a moderate energy resolution of 14% at 122 keV. The dynamic range is estimated to be in the range from 14 keV to $\sim250$ keV. We found that the sensor depletion layer expands as expected and the measured depletion depth is approximately $90~\rm{μm}$ when biased at $-240$ V.

astro-ph.IM↗

arXiv2025

Background Measurements and Simulations of the ComPair Balloon Flight

ComPair, a prototype of the All-sky Medium Energy Gamma-ray Observatory (AMEGO), completed a short-duration high-altitude balloon campaign on August 27, 2023 from Fort Sumner, New Mexico, USA. The goal of the balloon flight was the demonstration of ComPair as both a Compton and Pair telescope in flight, rejection of the charged particle background, and measurement of the background $γ$-ray spectrum. This analysis compares measurements from the balloon flight with Monte Carlo simulations to benchmark the instrument. The comparison finds good agreement between the measurements and simulations and supports the conclusion that ComPair accomplished its goals for the balloon campaign. Additionally, two charged particle background rejection schemes are discussed: a soft ACD veto that records a higher charged particle event rate but with less risk of event loss, and a hard ACD veto that limits the charged particle event rate on board. There was little difference in the measured spectra from the soft and hard ACD veto schemes, indicating that the hard ACD veto could be used for future flights. The successes of ComPair's engineering flight will inform the development of the next generation of ComPair with upgraded detector technology and larger active area.

astro-ph.IM↗

arXiv2025

Bottom-up Background Simulations of the 2016 COSI Balloon Flight

The Compton Spectrometer and Imager (COSI) is a Compton telescope designed to survey the 0.2-5 MeV sky, consisting of a compact array of cross-strip germanium detectors. As part of its development, in 2016 COSI had a successful 46 day flight on board NASA's Super Pressure Balloon platform. This was a precursor to the COSI Small Explorer (COSI-SMEX) satellite mission that will launch in 2027 into a equatorial low Earth (530 km) orbit. The observation of MeV gamma-rays is dominated by background radiation, especially due to the activation of the detector materials induced by cosmic-ray interactions. Thus, background simulation and identification are crucial for the data analysis. Because the COSI-SMEX detectors will be similar to the ones used for the balloon flight, the balloon measurements provide an important tool for testing and cross-checking our background simulations for the upcoming space mission. In this work we perform Monte Carlo simulations of the background emission from the 2016 COSI balloon flight. Including a phenomenological shape correction, we obtain an agreement with the data at the 10-20% level for energies between 0.1-1.6 MeV, and we successfully reproduce most of the activation lines induced by cosmic ray interactions.

astro-ph.IM↗

arXiv2025

Enhancing Compton telescope imaging with maximum a posteriori estimation: a modified Richardson-Lucy algorithm for the Compton Spectrometer and Imager

We present a modified Richardson-Lucy (RL) algorithm tailored for image reconstruction in MeV gamma-ray observations, focusing on its application to the upcoming Compton Spectrometer and Imager (COSI) mission. Our method addresses key challenges in MeV gamma-ray astronomy by incorporating Bayesian priors for sparseness and smoothness while optimizing background components simultaneously. We introduce a novel sparsity term suitable for Poisson-sampled data in addition to a smoothness prior, allowing for flexible reconstruction of both point sources and extended emission. The performance of the algorithm is evaluated using simulated three-month COSI observations of gamma-ray lines of $^{44}$Ti (1.157 MeV), $^{26}$Al (1.809 MeV), and positron annihilation (0.511 MeV), respectively, representing various spatial features. Our results demonstrate significant improvements over conventional RL methods, particularly in suppressing artificial structures in point source reconstructions and retaining diffuse spatial structures. This work represents an important step towards establishing a robust data analysis for studying nucleosynthesis, positron annihilation, and other high-energy phenomena in our Galaxy.

astro-ph.IM↗

arXiv2024

ComPair-2: A Next Generation Medium Energy Gamma-ray Telescope Prototype

Many questions posed in the Astro2020 Decadal survey in both the New Messengers and New Physics and the Cosmic Ecosystems science themes require a gamma-ray mission with capabilities exceeding those of existing (e.g. Fermi, Swift) and planned (e.g. COSI) observatories. ComPair, the Compton Pair telescope, is a prototype of such a next-generation gamma-ray mission. It had its inaugural balloon flight from Ft. Sumner, New Mexico in August 2023. To continue the goals of the ComPair project to develop technologies that will enable a future gamma-ray mission, the next generation of ComPair (ComPair-2) will be upgraded to increase the sensitivity and low-energy transient capabilities of the instrument. These advancements are enabled by AstroPix, a silicon monolithic active pixel sensor, in the tracker and custom dual-gain silicon photomultipliers and front-end electronics in the calorimeter. This effort builds on design work for the All-sky Medium Energy Gamma-ray Observatory eXplorer (AMEGO-X) concept that was submitted the 2021 MIDEX Announcement of Opportunity. Here we describe the ComPair-2 prototype design and integration and testing plans to advance the readiness level of these novel technologies.

astro-ph.IM↗

arXiv2024

Imaging and Spectral Fitting of Bright Gamma-ray Sources with the COSI Balloon Payload

The Compton Spectrometer and Imager balloon payload (COSI-Balloon) is a wide-field-of-view Compton $γ$-ray telescope that operates in the 0.2 - 5 MeV bandpass. COSI-Balloon had a successful 46-day flight in 2016 during which the instrument observed the Crab Nebula, Cygnus X-1, and Centaurus A. Using the data collected by the COSI-Balloon instrument during this flight, we present the source flux extraction of signals from the variable balloon background environment and produce images of these background-dominated sources by performing Richardson-Lucy deconvolutions. We also present the spectra measured by the COSI-Balloon instrument, compare and combine them with measurements from other instruments, and fit the data. The Crab Nebula was observed by COSI-Balloon and we obtain a measured flux in the energy band 325 - 480 keV of (4.5 ${\pm}$ 1.6) ${\times}$ 10$^{-3}$ ph cm$^{-2}$ s$^{-1}$. The model that best fits the COSI-Balloon data combined with measurements from NuSTAR and Swift-BAT is a broken power law with a measured photon index $Γ$ = 2.20 ${\pm}$ 0.02 above the 43 keV break. Cygnus X-1 was also observed during this flight, and we obtain a measured flux of (1.4 ${\pm}$ 0.2) ${\times}$ 10$^{-3}$ ph cm$^{-2}$ s$^{-1}$ in the same energy band and a best-fit result (including data from NuSTAR, Swift-BAT, and INTEGRAL/ IBIS) was to a cutoff power law with a high-energy cutoff energy of 138.3 ${\pm}$ 1.0 keV and a photon index of $Γ$ = 1.358 ${\pm}$ 0.002. Lastly, we present the measured spectrum of Centaurus A and our best model fit to a power law with a photon index of $Γ$ = 1.73 ${\pm}$ 0.01.

astro-ph.HE↗

arXiv2024

A-STEP: The AstroPix Sounding Rocket Technology Demonstration Payload

A next-generation medium-energy (100 keV to 100 MeV) gamma-ray observatory will greatly enhance the identification and characterization of multimessenger sources in the coming decade. Coupling gamma-ray spectroscopy, imaging, and polarization to neutrino and gravitational wave detections will develop our understanding of various astrophysical phenomena including compact object mergers, supernovae remnants, active galactic nuclei and gamma-ray bursts. An observatory operating in the MeV energy regime requires technologies that are capable of measuring Compton scattered photons and photons interacting via pair production. AstroPix is a monolithic high voltage CMOS active pixel sensor which enables future gamma-ray telescopes in this energy range. AstroPix's design is iterating towards low-power (~1.5 mW/cm$^{2}$), high spatial (500 microns pixel pitch) and spectral (<5 keV at 122 keV) tracking of photon and charged particle interactions. Stacking planar arrays of AstroPix sensors in three dimensions creates an instrument capable of reconstructing the trajectories and energies of incident gamma rays over large fields of view. A prototype multi-layered AstroPix instrument, called the AstroPix Sounding rocket Technology dEmonstration Payload (A-STEP), will test three layers of AstroPix quad chips in a suborbital rocket flight. These quad chips (2x2 joined AstroPix sensors) form the 4x4 cm$^{2}$ building block of future large area AstroPix instruments, such as ComPair-2 and AMEGO-X. This payload will be the first demonstration of AstroPix detectors operated in a space environment and will demonstrate the technology's readiness for future astrophysical and nuclear physics applications. In this work, we overview the design and state of development of the ASTEP payload.

astro-ph.IM↗

arXiv2024

The 2023 Balloon Flight of the ComPair Instrument

The ComPair balloon instrument is a prototype gamma-ray telescope that aims to further develop technology for observing the gamma-ray sky in the MeV regime. ComPair combines four detector subsystems to enable parallel Compton scattering and pair-production detection, critical for observing in this energy range. This includes a 10 layer double-sided silicon strip detector tracker, a virtual Frisch grid low energy CZT calorimeter, a high energy CsI calorimeter, and a plastic scintillator anti-coincidence detector. The inaugural balloon flight successfully launched from the Columbia Scientific Balloon Facility site in Fort Sumner, New Mexico, in late August 2023, lasting approximately 6.5 hours in duration. In this proceeding, we discuss the development of the ComPair Since balloon payload, the performance during flight, and early results.

astro-ph.IM↗

arXiv2024

Across the soft gamma-ray regime: utilizing simultaneous detections in the Compton Spectrometer and Imager (COSI) and the Background and Transient Observer (BTO) to understand astrophysical transients

The Compton Spectrometer and Imager (COSI) is a NASA funded Small Explorer (SMEX) mission slated to launch in 2027. COSI will house a wide-field gamma-ray telescope designed to survey the entire sky in the 0.2--5 MeV range. Using germanium detectors, the instrument will provide imaging, spectroscopy, and polarimetry of astrophysical sources with excellent energy resolution and degree-scale localization capabilities. In addition to the main instrument, COSI will fly with a student collaboration project known as the Background and Transient Observer (BTO). BTO will extend the COSI bandpass to energies lower than 200 keV, thus enabling spectral analysis across the shared band of 30 keV--2 MeV range. The BTO instrument will consist of two NaI scintillators and student-designed readout electronics. Using spectral information from both the COSI and BTO instruments, physics such as the energy peak turnover in gamma-ray bursts, the characteristics of magnetar flares, and the event frequency of a range of transient phenomena will be constrained. In this paper, we present the expected science returnables from BTO and comment on the shared returnables from the COSI and BTO missions. We include simulations of gamma-ray bursts, magnetar giant flares, and terrestrial gamma-ray flashes using BTO's spectral response. Additionally, we estimate BTO's gamma-ray burst detection rate and find that BTO will detect ~150 gamma-ray bursts per year, with most of these events being long bursts.

astro-ph.HE↗

arXiv2024

Performance evaluation of the high-voltage CMOS active pixel sensor AstroPix for gamma-ray space telescopes

AstroPix is a novel monolithic high-voltage CMOS active pixel sensor proposed for next generation medium-energy gamma-ray observatories like the All-sky Medium Energy Gamma-ray Observatory eXplorer (AMEGO-X). For AMEGO-X AstroPix must maintain a power consumption of less than $1.5~\rm{mW/{cm}^2}$ while having a pixel pitch of up to $500~\rm{μm}$. We developed the second and third versions of AstroPix, namely AstroPix2 and AstroPix3. AstroPix2 and AstroPix3 exhibit power consumptions of $3.4~\rm{mW/{cm}^2}$ and $4.1~\rm{mW/{cm}^2}$, respectively. While AstroPix2 has a pixel pitch of $250~\rm{μm}$, AstroPix3 achieves the desired size for AMEGO-X with a pixel pitch of $500~\rm{μm}$. Performance evaluation of a single pixel in an AstroPix2 chip revealed a dynamic range from 13.9 keV to 59.5 keV, with the energy resolution meeting the AMEGO-X target value ($<10\%$ (FWHM) at 60 keV). We performed energy calibration on most of the pixels in an AstroPix3 chip, yielding a mean energy resolution of 6.2 keV (FWHM) at 59.5 keV, with 44.4% of the pixels satisfying the target value. The dynamic range of AstroPix3 was assessed to span from 22.2 keV to 122.1 keV. The expansion of the depletion layer aligns with expectations in both AstroPix2 and AstroPix3. Furthermore, radiation tolerance testing was conducted on AstroPix. An AstroPix2 chip was subjected to an equivalent exposure of approximately 10 Gy from a high-intensity $\rm{^{60}Co}$ source. The chip was fully operational after irradiation although a decrease in gain by approximately 4% was observed.

astro-ph.IM↗

arXiv2024

The Double-Sided Silicon Strip Detector Tracker onboard the ComPair Balloon Flight

The ComPair balloon instrument is a prototype of the All-sky Medium Energy Gamma-ray Observatory (AMEGO) mission concept. AMEGO aims to bridge the spectral gap in sensitivity that currently exists from $\sim$100 keV to $\sim$100 MeV by being sensitive to both Compton and pair-production events. This is made possible through the use of four subsystems working together to reconstruct events: a double-sided silicon strip detector (DSSD) Tracker, a virtual Frisch grid cadmium zinc telluride (CZT) Low Energy Calorimeter, a ceasium iodide (CsI) High Energy Calorimeter, and an anti-coincidence detector (ACD) to reject charged particle backgrounds. Composed of 10 layers of DSSDs, ComPair's Tracker is designed to measure the position of photons that Compton scatter in the silicon, as well as reconstruct the tracks of electrons and positrons from pair-production as they propagate through the detector. By using these positions, as well as the absorbed energies in the Tracker and 2 Calorimeters, the energy and direction of the incident photon can be determined. This proceeding will present the development, testing, and calibration of the ComPair DSSD Tracker and early results from its balloon flight in August 2023.

astro-ph.IM↗