arXiv subjects

Carsten Dubs

Publications and source records attributed to Carsten Dubs.

45 records · Page 3Linked to original sources

arXiv2020

Propagation of spin-waves packets in individual nano-sized yttrium iron garnet magnonic conduits

Modern-days CMOS-based computation technology is reaching its fundamental limitations. The emerging field of magnonics, which utilizes spin waves for data transport and processing, proposes a promising path to overcome these limitations. Different devices have been demonstrated recently on the macro- and microscale, but the feasibility of the magnonics approach essentially relies on the scalability of the structure feature size down to an extent of a few 10 nm, which are typical sizes for the established CMOS technology. Here, we present a study of propagating spin-wave packets in individual yttrium iron garnet (YIG) conduits with lateral dimensions down to 50 nm. Space and time resolved micro-focused Brillouin-Light-Scattering (BLS) spectroscopy is used to characterize the YIG nanostructures and measure the spin-wave decay length and group velocity directly. The revealed magnon transport at the scale comparable to the scale of CMOS proves the general feasibility of a magnon-based data processing.

physics.app-ph↗

arXiv2020

Temperature dependence of spin pinning and spin-wave dispersion in nanoscopic ferromagnetic waveguides

The field of magnonics attracts significant attention due to the possibility of utilizing information coded into the spin-wave phase or amplitude to perform computation operations on the nanoscale. Recently, spin waves were investigated in Yttrium Iron Garnet (YIG) waveguides with widths ranging down to 50 nm and aspect ratios thickness over width approaching unity. A critical width was found, below which the exchange interaction suppresses the dipolar pinning phenomenon and the system becomes unpinned. Here we continue these investigations and analyse the pinning phenomenon and spin-wave dispersions as a function of temperature, thickness and material of choice. Higher order modes, the influence of a finite wavevector along the waveguide and the impact of the pinning phenomenon on the spin-wave lifetime are discussed as well as the influence of a trapezoidal cross section and edge roughness of the waveguides. The presented results are of particular interest for potential applications in magnonic devices and the incipient field of quantum magnonics at cryogenic temperatures.

physics.app-ph↗

arXiv2019

Low damping and microstructural perfection of sub-40nm-thin yttrium iron garnet films grown by liquid phase epitaxy

The field of magnon spintronics is experiencing an increasing interest in the development of solutions for spin-wave-based data transport and processing technologies that are complementary or alternative to modern CMOS architectures. Nanometer-thin yttrium iron garnet (YIG) films have been the gold standard for insulator-based spintronics to date, but a potential process technology that can deliver perfect, homogeneous large-diameter films is still lacking. We report that liquid phase epitaxy (LPE) enables the deposition of nanometer-thin YIG films with low ferromagnetic resonance losses and consistently high magnetic quality down to a thickness of 20 nm. The obtained epitaxial films are characterized by an ideal stoichiometry and perfect film lattices, which show neither significant compositional strain nor geometric mosaicity, but sharp interfaces. Their magneto-static and dynamic behavior is similar to that of single crystalline bulk YIG. We found, that the Gilbert damping coefficient alpha is independent of the film thickness and close to 1 x 10-4, and that together with an inhomogeneous peak-to-peak linewidth broadening of delta H0|| = 0.4 G, these values are among the lowest ever reported for YIG films with a thickness smaller than 40 nm. These results suggest, that nanometer-thin LPE films can be used to fabricate nano- and micro-scaled circuits with the required quality for magnonic devices. The LPE technique is easily scalable to YIG sample diameters of several inches.

cond-mat.mtrl-sci↗

arXiv2019

Optimization of Multi-Frequency Magnonic Waveguides with Enhanced Group Velocities by Exchange Coupled Ferrimagnet/Ferromagnet Bilayers

We report broadband spectroscopy and numerical analysis by which we explore propagating spin waves in a magnetic bilayer consisting of a 23 nm thick permalloy film deposited on 130 nm thick $Y_{3}Fe_{5}O_{12}$. In the bilayer, we observe a characteristic mode that exhibits a considerably larger group velocity at small in-plane magnetic field than both the magnetostatic and perpendicular standing spin waves. Using the finite element method, we confirm the observations by simulating the mode profiles and dispersion relations. They illustrate the hybridization of spin wave modes due to exchange coupling at the interface. The high-speed propagating mode found in the bilayer can be utilized to configure multi-frequency spin wave channels enhancing the performance of spin wave based logic devices.

physics.app-ph↗

arXiv2018

Experimental proof of the reciprocal relation between spin Peltier and spin Seebeck effects in a bulk YIG/Pt bilayer

We verify for the first time the reciprocal relation between the spin Peltier and spin Seebeck effects in a bulk YIG/Pt bilayer. Both experiments are performed on the same YIG/Pt device by a setup able to accurately determine heat currents and to separate the spin Peltier heat from the Joule heat background. The sample-specific value for the characteristics of both effects measured on the present YIG/Pt bilayer is $(6.2 \pm 0.4)\times 10^{-3} \,\, \mbox{KA$^{-1}$}$. In the paper we also discuss the relation of both effects with the intrinsic and extrinsic parameters of YIG and Pt and we envisage possible strategies to optimize spin Peltier refrigeration.

cond-mat.mes-hall↗

arXiv2017

Temperature dependent magnetic damping of yttrium iron garnet spheres

We investigate the temperature dependent microwave absorption spectrum of an yttrium iron garnet sphere as a function of temperature (5 K to 300 K) and frequency (3 GHz to 43.5 GHz). At temperatures above 100 K, the magnetic resonance linewidth increases linearly with temperature and shows a Gilbert-like linear frequency dependence. At lower temperatures, the temperature dependence of the resonance linewidth at constant external magnetic fields exhibits a characteristic peak which coincides with a non-Gilbert-like frequency dependence. The complete temperature and frequency evolution of the linewidth can be modeled by the phenomenology of slowly relaxing rare-earth impurities and either the Kasuya-LeCraw mechanism or the scattering with optical magnons. Furthermore, we extract the temperature dependence of the saturation magnetization, the magnetic anisotropy and the g-factor.

cond-mat.mtrl-sci↗

arXiv2016

Gilbert damping of magnetostatic modes in a yttrium iron garnet sphere

The magnetostatic mode (MSM) spectrum of a 300$μ$m diameter single crystalline sphere of yttrium iron garnet is investigated using broadband ferromagnetic resonance (FMR). The individual MSMs are identified via their characteristic dispersion relations and the corresponding mode number tuples $(nmr)$ are assigned. Taking FMR data over a broad frequency and magnetic field range allows to analyze both the Gilbert damping parameter~$α$ and the inhomogeneous line broadening contribution to the total linewidth of the MSMs separately. The linewidth analysis shows that all MSMs share the same Gilbert damping parameter $α=2.7(5) \times 10^{-5}$ irrespective of their mode index. In contrast, the inhomogeneous line broadening shows a pronounced mode dependence. This observation is modeled in terms of two-magnon scattering processes of the MSMs into the spin-wave manifold, mediated by surface and volume defects.

cond-mat.mtrl-sci↗

arXiv2016

Sub-micrometer yttrium iron garnet LPE films with low ferromagnetic resonance losses

Using liquid phase epitaxy (LPE) technique (111) yttrium iron garnet (YIG) films with thicknesses of ~100 nm and surface roughnesses as low as 0.3 nm have been grown as a basic material for spin-wave propagation experiments in microstructured waveguides. The continuously strained films exhibit nearly perfect crystallinity without significant mosaicity and with effective lattice misfits of delta a(perpendicular)/a(substrate) ~10-4 and below. The film/substrate interface is extremely sharp without broad interdiffusion layer formation. All LPE films exhibit a nearly bulk-like saturation magnetization of (1800+-20) Gs and an `easy cone' anisotropy type with extremely small in-plane coercive fields <0.2 Oe. There is a rather weak in-plane magnetic anisotropy with a pronounced six-fold symmetry observed for saturation field <1.5 Oe. No significant out-of-plane anisotropy is observed, but a weak dependence of the effective magnetization on the lattice misfit is detected. The narrowest ferromagnetic resonance linewidth is determined to be 1.4 Oe @ 6.5 GHz which is the lowest value reported so far for YIG films of 100 nm thicknesses and below. The Gilbert damping coefficient for investigated LPE films is estimated to be close to 1 x 10-4.

cond-mat.mtrl-sci↗

arXiv2014

Measurements of the exchange stiffness of YIG films by microwave resonance techniques

Measurements of the exchange stiffness $D$ and the exchange constant $A$ of Yttrium Iron Garnet (YIG) films are presented. The YIG films with thicknesses from 0.9 $μ$m to 2.6 $μ$m were investigated with a microwave setup in a wide frequency range from 5 to 40 GHz. The measurements were performed when the external static magnetic field was applied in-plane and out-of-plane. The method of Schreiber and Frait, based on the analysis of the perpendicular standing spin wave (PSSW) mode frequency dependence on the applied out-of-plane magnetic field, was used to obtain the exchange stiffness $D$. This method was modified to avoid the influence of internal magnetic fields during the determination of the exchange stiffness. Furthermore, the method was adapted for in-plane measurements as well. The results obtained using all methods are compared and values of $D$ between $(5.18\pm0.01) \cdot 10^{-17}$T$\cdot$m$^2$ and $(5.34\pm0.02) \cdot 10^{-17}$ T$\cdot$m$^2$ were obtained for different thicknesses. From this the exchange constant was calculated to be $A=(3.65 \pm 0.38)~$pJ/m.

cond-mat.mtrl-sci↗