arXiv subjects

Carsten Svaneborg

Publications and source records attributed to Carsten Svaneborg.

18 recordsLinked to original sources

arXiv2026

Plateau moduli of Kremer-Grest models for commodity polymer melts

We estimate the plateau moduli of highly entangled end-pinned bead-spring polymer melts with Z = 100 and Z = 200 from the time-dependent elastic response to a step strain, which we first extrapolate to infinite time and then interpolate to zero strain. We present data for systems deformed in the melt state as well as for systems deformed at the primitive path level following the recent iPPA protocol. We observe excellent agreement between the plateau moduli obtained via the two deformation protocols and good agreement with the available experimental data for commodity polymer melts using a common mapping on the Kuhn scale.

cond-mat.soft↗

arXiv2024

Inverse Primitive Path Analysis

The primitive-path analysis (PPA) {[}R. Everaers et al. Science 303, 823, (2004){]} is an algorithm that transforms a model polymer melt into its topologically equivalent mesh by removing excess contour length stored in thermal fluctuations. Here we present an inverse PPA algorithm that gradually reintroduces contour length in a PPA mesh to produce an topologically equilvalent polymer melt. This enables the generation of model polymer materials with well controlled topology. As an illustration, we generate knitted model polymer materials with a 2D cubic lattice of entanglement points using a synthetic PPA mesh as a starting point. We also show how to combine PPA and inverse PPA to accelerate stress relaxation approximately by an order of magnitude in simulation time. This reduces the computational cost of computational studies of structure-property relations for polymer materials.

cond-mat.soft↗

arXiv2023

A computational tool for symbolic derivation of the small angle scattering from complex composite structures

Analysis of small angle scattering (SAS) data requires intensive modelling to infer and characterize the structures present in a sample. This iterative improvement of models is a time consuming process. Here we present the Scattering Equation Builder (SEB), a C++ library that derives exact analytic expressions for the form factor of complex composite structures. The user writes a small program that specifies how sub-units should be linked to form a composite structure and calls SEB to obtain an expression for the form factor. SEB supports e.g. Gaussian polymer chains and loops, thin rods and circles, solid spheres, spherical shells and cylinders, and many different options for how these can be linked together. In the present paper, we present the formalism behind SEB, and give simple case studies such as block-copolymers with different types of linkage and more complex examples such as a random walk model of $100$ linked sub-units, dendrimers, polymers and rods attached to surfaces of geometric objects, and finally the scattering from a linear chain of 5 stars, where each star is build by four diblock copolymers. These examples illustrate how SEB can be used to develop complex models and hence reduce the cost of analyzing SAS data.

physics.comp-ph↗

arXiv2022

Multiscale equilibration of highly entangled isotropic model polymer melts

We present a computationally efficient multiscale method for preparing equilibrated, isotropic long chain model polymer melts. As an application we generate Kremer-Grest melts of $1000$ chains with $200$ entanglements and $25000$-$2000$ beads per chain, which cover the experimentally relevant bending rigidities up to and beyond the limit of the isotropic-nematic transition. In the first step, we employ Monte Carlo simulations of a lattice model to equilibrate the large-scale chain structure above the tube scale while ensuring a spatially homogeneous density distribution. We then use theoretical insight from a constrained mode tube model to introduce the bead degrees of freedom together with random walk conformational statistics all the way down to the Kuhn scale of the chains. This is followed by a sequence of simulations with carefully parameterized force-capped bead-spring models, which slowly introduce the local bead packing while reproducing the larger scale chain statistics of the target Kremer-Grest system at all levels of force-capping. Finally we can switch to the full Kremer-Grest model without perturbing the structure. The resulting chain statistics is in excellent agreement with literature results on all length scales accessible in brute-force simulations of shorter chains.

cond-mat.soft↗

arXiv2020

Computational study of the cross-link and the entanglement contributions to the elastic properties of model PDMS networks

We built randomly cross-linked model PDMS networks and used Molecular Dynamics Methods to obtain stress-strain curves. Mooney-Rivlin (MR) analysis was used to estimate the shear moduli. We applied Primitive Path analysis (PPA) and its variation, Phantom Primitive Path analysis (3PA), to estimate the entanglement and the cross-link moduli, respectively. The MR moduli estimates are in good agreement with the sum of the entanglement and the cross-link moduli, and we observe that the stress-strain data collapse to a universal form when reduced with the PPA and 3PA moduli. We studied how the MR parameters $\mathrm{C}_1$, $\mathrm{C}_2$ vary from cross-link to entanglement dominated networks. For the latter, we observed a $40\%$, $60\%$ contribution of $2\,\mathrm{C}_1$, $2\,\mathrm{C}_2$ to the shear modulus, respectively. Finally, we fitted several models to the data. While all fits are good, the estimates for the entanglement and the cross-link moduli vary significantly when compared to our PPA and 3PA benchmarks.

cond-mat.soft↗

arXiv2019

Kremer-Grest models for commodity polymer melts: Linking theory, experiment and simulation at the Kuhn scale

The Kremer-Grest (KG) polymer model is a standard model for studying generic polymer properties in Molecular Dynamics simulations. It owes its popularity to its simplicity and computational efficiency, rather than its ability to represent specific polymers species and conditions. Here we show, that by tuning the chain stiffness it is possible to adapt the KG model to model melts of real polymers. In particular, we provide mapping relations from KG to SI units for a wide range of commodity polymers. The connection between the experimental and the KG melts is made at the Kuhn scale, i.e. at the crossover from chemistry-specific small scale to the universal large scale behavior. We expect Kuhn scale-mapped KG models to faithfully represent universal properties dominated by the large scale conformational statistics and dynamics of flexible polymers. In particular, we observe very good agreement between entanglement moduli of our KG models and the experimental moduli of the target polymers.

cond-mat.soft↗

arXiv2019

Characteristic time and length scales in melts of Kremer-Grest bead-spring polymers with wormlike bending stiffness

The Kremer-Grest (KG) model is a standard for studying generic polymer properties. Here we have equilibrated KG melts up to and beyond $200$ entanglements per chain for varying chain stiffness. We present methods for estimating the Kuhn length corrected for incompressibility effects, for estimating the entanglement length corrected for chain stiffness, for estimating bead frictions and Kuhn times taking into account entanglement effects. These are the key parameters for enabling quantitative, accurate, and parameter free comparisons between theory, experiment and simulations of KG polymer models with varying stiffness. We demonstrate this for the mean-square monomer displacements in moderately to highly entangled melts as well as for the shear relaxation modulus for unentangled melts, which are found to be in excellent agreement with the predictions from standard theories of polymer dynamics.

cond-mat.soft↗

arXiv2019

Dynamics of dense hard sphere colloidal systems: a numerical analysis

The applicability to dense hard sphere colloidal suspensions of a general coarse-graining approach called Record Dynamics (RD) is tested by extensive molecular dynamics simulations. We reproduce known results as logarithmic diffusion and the logarithmic decay of the average potential energy per particle. We provide quantitative measures for the cage size and identify the displacements of single particles corresponding to cage breakings. We then partition the system into spatial domains. Within each domain, a subset of intermittent events called quakes is shown to constitute a log-Poisson process, as predicted by Record Dynamics. Specifically, these events are shown to be statistically independent and Poisson distributed with an average depending on the logarithm of time. Finally, we discuss the nature of the dynamical barriers surmounted by quakes and link RD to the phenomenology of aging hard sphere colloids.

cond-mat.stat-mech↗

arXiv2018

Kremer-Grest models for universal properties of specific common polymer species

The Kremer-Grest (KG) bead-spring model is a near standard in Molecular Dynamic simulations of generic polymer properties. It owes its popularity to its computational efficiency, rather than its ability to represent specific polymer species and conditions. Here we investigate how to adapt the model to match the universal properties of a wide range of chemical polymers species. For this purpose we vary a single parameter originally introduced by Faller and Müller-Plathe, the chain stiffness. Examples include polystyrene, polyethylene, polypropylene, cis-polyisoprene, polydimethylsiloxane, polyethyleneoxide and styrene-butadiene rubber. We do this by matching the number of Kuhn segments per chain and the number of Kuhn segments per cubic Kuhn volume for the polymer species and for the Kremer-Grest model. We also derive mapping relations for converting KG model units back to physical units, in particular we obtain the entanglement time for the KG model as function of stiffness allowing for a time mapping. To test these relations, we generate large equilibrated well entangled polymer melts, and measure the entanglement moduli using a static primitive-path analysis of the entangled melt structure as well as by simulations of step-strain deformation of the model melts. The obtained moduli for our model polymer melts are in good agreement with the experimentally expected moduli.

cond-mat.soft↗

arXiv2016

Multiscale approach to equilibrating model polymer melts

We present an effective and simple multiscale method for equilibrating Kremer Grest model polymer melts of varying stiffness. In our approach, we progressively equilibrate the melt structure above the tube scale, inside the tube and finally at the monomeric scale. We make use of models designed to be computationally effective at each scale. Density fluctuations in the melt structure above the tube scale are minimized through a Monte Carlo simulated annealing of a lattice polymer model. Subsequently the melt structure below the tube scale is equilibrated via the Rouse dynamics of a force-capped Kremer-Grest model that allows chains to partially interpenetrate. Finally the Kremer-Grest force field is introduced to freeze the topological state and enforce correct monomer packing. We generate $15$ melts of $500$ chains of $10.000$ beads for varying chain stiffness as well as a number of melts with $1.000$ chains of $15.000$ monomers. To validate the equilibration process we study the time evolution of bulk, collective and single-chain observables at the monomeric, mesoscopic and macroscopic length scales. Extension of the present method to longer, branched or polydisperse chains and/or larger system sizes is straight forward.

cond-mat.soft↗

arXiv2012

Non-Ideality of a DNA Strand Displacement AND Gate Studied with a Dynamic Bonded DNA Model

We perform a spatially resolved simulation study of an AND gate based on DNA strand displacement using several lengths of the toehold and the adjacent domains. DNA strands are modelled using a coarse-grained dynamic bonding model {[}C. Svaneborg, Comp. Phys. Comm. 183, 1793 (2012){]}. We observe a complex transition path from the initial state to the final state of the AND gate. This path is strongly influenced by non-ideal effects due to transient bubbles revealing undesired toeholds and thermal melting of whole strands. We have also characterized the bound and unbound kinetics of single strands, and in particular the kinetics of the total AND operation and the three distinct distinct DNA transitions that it is based on. We observe a exponential kinetic dependence on the toehold length of the competitive displacement operation, but that the gate operation time is only weakly dependent on both the toehold and adjacent domain length. Our gate displays excellent logical fidelity in three input states, and quite poor fidelity in the fourth input state. This illustrates how non-ideality can have very selective effects on fidelity. Simulations and detailed analysis such as those presented here provide molecular insights into strand displacement computation, that can be also be expected in chemical implementations.

physics.bio-ph↗

arXiv2012

DNA Self-Assembly and Computation Studied with a Coarse-grained Dynamic Bonded Model

We study DNA self-assembly and DNA computation using a coarse-grained DNA model within the directional dynamic bonding framework {[}C. Svaneborg, Comp. Phys. Comm. 183, 1793 (2012){]}. In our model, a single nucleotide or domain is represented by a single interaction site. Complementary sites can reversibly hybridize and dehybridize during a simulation. This bond dynamics induces a dynamics of the angular and dihedral bonds, that model the collective effects of chemical structure on the hybridization dynamics. We use the DNA model to perform simulations of the self-assembly kinetics of DNA tetrahedra, an icosahedron, as well as strand displacement operations used in DNA computation.

cond-mat.soft↗

arXiv2012

A Formalism for Scattering of Complex Composite Structures. 2 Distributed Reference Points

Recently we developed a formalism for the scattering from linear and acyclic branched structures build of mutually non-interacting sub-units.{[}C. Svaneborg and J. S. Pedersen, J. Chem. Phys. 136, 104105 (2012){]} We assumed each sub-unit has reference points associated with it. These are well defined positions where sub-units can be linked together. In the present paper, we generalize the formalism to the case where each reference point can represent a distribution of potential link positions. We also present a generalized diagrammatic representation of the formalism. Scattering expressions required to model rods, polymers, loops, flat circular disks, rigid spheres and cylinders are derived. and we use them to illustrate the formalism by deriving the generic scattering expression for micelles and bottle brush structures and show how the scattering is affected by different choices of potential link positions.

cond-mat.stat-mech↗

arXiv2012

LAMMPS Framework for Dynamic Bonding and an Application Modeling DNA

We have extended the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) to support directional bonds and dynamic bonding. The framework supports stochastic formation of new bonds, breakage of existing bonds, and conversion between bond types. Bond formation can be controlled to limit the maximal functionality of a bead with respect to various bond types. Concomitant with the bond dynamics, angular and dihedral interactions are dynamically introduced between newly connected triplets and quartets of beads, where the interaction type is determined from the local pattern of bead and bond types. When breaking bonds, all angular and dihedral interactions involving broken bonds are removed. The framework allows chemical reactions to be modeled, and use it to simulate a simplistic, coarse-grained DNA model. The resulting DNA dynamics illustrate the power of the present framework.

cond-mat.soft↗

arXiv2012

A Formalism for Scattering of Complex Composite Structures. 1 Applications to Branched Structures of Asymmetric Sub-Units

We present a formalism for the scattering of an arbitrary linear or acyclic branched structure build by joining mutually non-interacting arbitrary functional sub-units. The formalism consists of three equations expressing the structural scattering in terms of three equations expressing the sub-unit scattering. The structural scattering expressions allows a composite structures to be used as sub-units within the formalism itself. This allows the scattering expressions for complex hierarchical structures to be derived with great ease. The formalism is furthermore generic in the sense that the scattering due to structural connectivity is completely decoupled from internal structure of the sub-units. This allows sub-units to be replaced by more complex structures. We illustrate the physical interpretation of the formalism diagrammatically. By applying a self-consistency requirement we derive the pair distributions of an ideal flexible polymer sub-unit. We illustrate the formalism by deriving generic scattering expressions for branched structures such as stars, pom-poms, bottle-brushes, and dendrimers build out of asymmetric two-functional sub-units.

cond-mat.stat-mech↗

arXiv2010

Stress Relaxation in Entangled Polymer Melts

We present an extensive set of simulation results for the stress relaxation in equilibrium and step-strained bead-spring polymer melts. The data allow us to explore the chain dynamics and the shear relaxation modulus, $G(t)$, into the plateau regime for chains with $Z=40$ entanglements and into the terminal relaxation regime for $Z=10$. Using the known (Rouse) mobility of unentangled chains and the melt entanglement length determined via the primitive path analysis of the microscopic topological state of our systems, we have performed parameter -free tests of several different tube models. We find excellent agreement for the Likhtman-McLeish theory using the double reptation approximation for constraint release, if we remove the contribution of high-frequency modes to contour length fluctuations of the primitive chain.

cond-mat.soft↗

arXiv2008

Microphase separation in cross-linked polymer blends: Efficient replica RPA post-processing of simulation data for homopolymer networks

We investigate the behaviour of randomly cross-linked (co)polymer blends using a combination of replica theory and large-scale molecular dynamics simulations. In particular, we derive the analogue of the random phase approximation for systems with quenched disorder and show how the required correlation functions can be calculated efficiently. By post-processing simulation data for homopolymer networks we are able to describe neutron scattering measurements in heterogeneous systems without resorting to microscopic detail and otherwise unphysical assumptions. We obtain structure function data which illustrate the expected microphase separation and contain system-specific information relating to the intrinsic length scales of our networks.

cond-mat.soft↗

arXiv2004

Strain-dependent localization, microscopic deformations, and macroscopic normal tensions in model polymer networks

We use molecular dynamics simulations to investigate the microscopic and macroscopic response of model polymer networks to uniaxial elongations. By studying networks with strands lengths ranging from $N_s=20$ to 200 we cover the full crossover from cross-link to entanglement dominated behavior. Our results support a recent version of the tube model which accounts for the different strain dependence of chain localization due to chemical cross-links and entanglements.

cond-mat.soft↗