arXiv subjects

Catarina S. Monteiro

Publications and source records attributed to Catarina S. Monteiro.

10 recordsLinked to original sources

arXiv2026

Characterization of Event-Based Vision Sensors for High-Speed Optical Instrumentation

Event-based vision sensors provide asynchronous event generation and microsecond timestamp resolution, which may be useful for high-speed optical measurements. However, precise event timestamps do not necessarily guarantee accurate reconstruction of temporally varying optical signals, particularly under dense and spatially extended illumination, imposing operational limits when used as optical interrogators that remain underexplored in the literature. To address this knowledge gap, this work presents a systematic, quantitative characterization of the temporal response and waveform reconstruction fidelity of an IMX636-based event camera under both controlled sinusoidal and pulsed optical excitation. For this, frequency-domain measurements are first used to evaluate modulation response, event-rate behavior, polarity balance, and spectral reconstruction fidelity over a wide range of illumination conditions and region-of-interest geometries. Then, complementary pulse-based measurements quantify first-event latency, response duration, recovery dynamics, and pulse-width reconstruction accuracy under rapidly repeated excitation, showing that optical transitions can be detected with first-event latencies below 5 microseconds. However, the complete event response extends over significantly longer timescales due to photoreceptor dynamics, refractory behavior, and readout serialization. Under high-frequency modulation and short-pulse excitation, the reconstructed waveforms progressively degrade because of temporal spreading and imbalance between positive and negative event generation. The measurements further demonstrate that the temporal fidelity of the reconstructed signal depends strongly on the geometry and spatial activity of the selected region of interest.

physics.optics↗

arXiv2026

Towards Neuromorphic Event-Based Sensing for High-Speed Multi-Spectral Classification and Tracking of Microparticles

Conventional image-based microfluidic systems face an inherent trade-off between throughput, imaging speed, and data bandwidth, limiting their ability to monitor high-velocity flows without significant motion blur or prohibitive data generation. Event-based sensing has emerged as a high-speed, low-power alternative, but has so far been largely restricted to tracking monodisperse, spherical particles. In this work, we introduce a microfluidic sensing platform that enables the simultaneous extraction of kinematic and spectral information from polydisperse microparticles using a neuromorphic imaging approach. By integrating a spatially multiplexed RGB filter mask with an asynchronous event-based sensor, spectral signature and motion are encoded directly at the sensing stage, eliminating the need for image reconstruction or learning-based inference. The system achieves sub-millisecond temporal resolution and maintains robust classification performance across a broad range of particle sizes and flow velocities, including under non-laminar conditions, reaching up to 82% accuracy for classification of colored particles within the 0.08-0.18 mm range. The event-driven architecture reduces data bandwidth by >240x compared to conventional high-speed imaging, while sustaining an area throughput of 460 mm^2/s. By providing a computationally efficient and low-latency particle characterization, this framework paves the way for a scalable solution towards high-speed, label-free screening of heterogeneous analytes in clinical diagnostics and environmental monitoring.

physics.optics↗

arXiv2026

All-optical Edge Computing for Speckle Sensing Interrogation

Speckle-based sensing exploits the rich environmental information of its high-dimensional spatial intensity patterns. However, the requirement for camera-based acquisition and subsequent electronic digitization introduces significant latency and bandwidth bottlenecks that forbid real-time operation and higher temporal resolutions. Aiming to bypass this imaging processing pipeline, this manuscript presents an optically reconfigurable edge-computing platform for speckle-based sensors that performs task-specific computation directly in the optical domain. This is achieved by projecting output speckle patterns onto a digital micromirror device, using it as a programmable optical layer whose parameters are trained in situ using an evolutionary optimization strategy solely from detector feedback. We demonstrate the concept with a multi-point optical fiber sensing task, where multiple piezoelectric actuators simultaneously perturb the fiber, modifying the speckle pattern. Optimizing a set of masks to decouple these concurrent signals, the system successfully achieves real-time signal separation, achieving a target signal enhancement exceeding 4 dB while suppressing crosstalk leakage below -10 dB. Operating with bandwidths limited only by the photodetector, this approach paves the way for real-time and ultrafast optical sensing via an all-optical edge computing solution.

physics.optics↗

arXiv2026

Asynchronous Event-Based Spectroscopy for Microsecond-Resolved Spectral Reconstruction

Many physical and chemical processes of interest evolve on timescales that push the limits of conventional spectroscopic instrumentation. Indeed, the temporal resolution of standard spectrometers is often insufficient to track these dynamics, which is connected to the fact that most systems rely on frame-based sensors, imposing fundamental constraints on acquisition speed, sensitivity, and data efficiency, frequently limiting practical operation to the kHz regime. In this work, we present an approach to circumvent this limitation by developing an event-based spectrometer to enable spectral reconstruction with microsecond temporal resolution by leveraging a Czerny-Turner configuration combined with asynchronous and event-driven sensing. A dedicated signal processing pipeline converts the resulting stream of binary events into calibrated spectra through temporal accumulation, geometric correction, and vertical spatial integration of the spectral line, covering a 234nm bandwidth in the visible range with a spectral resolution of approximately 0.18nm per pixel. Performance characterization under temporally modulated illumination demonstrates that the event-based spectrometer can reconstruct spectra at probing rates of up to tens of kilohertz, far exceeding the practical limits of a conventional frame-based spectrometer operated in parallel, while accurately preserving spectral peak positions and relative spectral features. Finally, to further illustrate its potential applications, the system is validated in a microfluidic experiment integrated into an inverted microscope, where spectral changes induced by an absorbing dye are tracked with higher temporal fidelity and resolution compared with the frame-based approach. These results establish event-based spectroscopy as a promising paradigm for real-time, high-temporal-resolution spectral measurements in dynamic and low-light applications.

physics.optics↗

arXiv2025

Quantum Imaging of Birefringent Samples using Hong-Ou-Mandel Interference

Two-photon interference in a Hong-Ou-Mandel (HOM) interferometer can be used as a quantum sensing mechanism due to the sensitivity of the interference dip to perturbations of the photon indistinguishability. In particular, recent works have generalized this concept to microscopy setups, but the sensitivity to optical path differences constrains its application to samples with thickness variation typically below a few micrometers if tracking changes in the coincidences at a fixed delay. Extending the concept to polarization microscopy and circumventing this limitation, this manuscript explores the use of a narrowband photon pair source with coherence length >1 mm to broaden the HOM dip. Thus, realistic sample-thickness variations introduce negligible temporal distinguishability, and changes in coincidence rate at the dip centre are then dominated by sample-induced polarization effects. To compute the polarization rotation, we develop a statistical model for the interferometer, derive the Fisher information, and establish a maximum-likelihood estimator for the local fast-axis angle. Recording dip and baseline frames at each sample position via raster scanning, the experimental results validate the framework, agreeing with classical polarized-intensity images while demonstrating operation at a maximum-precision regime and insensitiveness to layer thickness. Overall, the approach enclosed provides a quantum-based quantitative imaging of birefringent structures, which can motivate further advantageous applications, including enhanced signal-to-noise ratio and lower damage imaging of photosensitive samples.

quant-ph↗

arXiv2025

Probing a theoretical framework for a Photonic Extreme Learning Machine

The development of computing paradigms alternative to von Neumann architectures has recently fueled significant progress in novel all-optical processing solutions. In this work, we investigate how the coherence properties can be exploited for computing by expanding information onto a higher-dimensional space in the photonic extreme learning machine framework. A theoretical framework is provided based on the transmission matrix formalism, mapping the input plane onto the output camera plane, resulting in the establishment of the connection with complex extreme learning machines and derivation of upper bounds for the hidden space dimensionality as well as the form of the activation functions. Experiments using free-space propagation through a diffusive medium, performed in low-dimensional input space regimes, validate the model and the proposed estimator for the dimensionality. Overall, the framework presented and the findings enclosed have the potential to foster further research in a multitude of directions, from the development of robust general-purpose all-optical hardware to a full-stack integration with optical sensing devices toward edge computing solutions.

physics.optics↗

arXiv2025

Multimodal Speckle-polarization Fiber-optic Sensing for Localized and High-bandwidth Vibration Monitoring

High-bandwidth and multi-point acoustic and vibration sensing is a critical asset for real-time condition monitoring, maintenance, and surveillance applications. In the case of large scales and harsh environments, optical fiber distributed sensing has emerged as a compelling alternative to electronic transducers, featuring lower installation and maintenance costs, along with compact footprints and enhanced robustness. Yet, current distributed fiber-optic sensing solutions are typically costly and face a resolution-bandwidth tradeoff. In this work, we present an alternative fiber-optic vibration sensing strategy that harnesses a multimodal architecture combining speckle and polarization interrogation. The experimental results demonstrate the concept by achieving speckle-based signal source localization with centimeter-range spatial resolution, while obtaining a high-fidelity waveform reconstruction over at least 100 Hz-40 kHz bandwidth via the polarimetric sensing part. Overall, the work establishes a general and promising blueprint to harness multimodality in fiber sensing and break single-modality constraints.

physics.optics↗

arXiv2025

Event-based Speckle Interrogation for High-Bandwidth Multi-point Optical Fiber Sensing

Speckle-based fiber optic sensors are well-known to offer high sensitivity but are strongly limited on the interrogation side by low camera frame rates and dynamic range. To address this limitation, we present a novel interrogation framework that explores event-based vision to achieve high throughput, high bandwidth, and low-latency speckle analysis of a multimode optical fiber sensor. In addition, leveraging a tensor-based decomposition of the raw event streams through multi-point calibration and machine-learning optimization, our approach also proves capable of isolating simultaneous deformations applied at distinct points. The experimental results validate the methodology by separating the signals of four piezoelectric actuators over a 400Hz-20kHz range with minimal crosstalk applied over varying distances from 3cm to 75cm. Finally, extending the impact of the work with an acoustic sensing proof-of-concept, we have coupled the fiber to two plastic enclosures and recovered separable audio signals between 400 and 1.8 kHz with minimal waveform distortion. Overall, these results establish event-driven speckle interrogation as a new versatile platform for real-time, multi-point acoustic sensing and pave for its application in complex and unstructured environments in future works.

physics.optics↗

arXiv2025

High-Precision Acoustic Event Monitoring in Single-Mode Fibers Using Fisher Information

Polarization optical fiber sensors are based on modifications of fiber birefringence by an external measurand (e.g. strain, pressure, acoustic waves). Yet, this means that different input states of polarization will result in very distinct behaviors, which may or may not be optimal in terms of sensitivity and signal-to-noise ratio. To tackle this challenge, this manuscript presents an optimization technique for the input polarization state using the Fisher information formalism, which allows for achieving maximal precision for a statistically unbiased metric. By first measuring the variation of the Mueller matrix of the optical fiber in response to controlled acoustic perturbations induced by piezo speakers, we compute the corresponding Fisher information operator. Using maximal information states of the Fisher information, it was possible to observe a significant improvement in the performance of the sensor, increasing the signal-to-noise ratio from 4.3 to 37.6 dB, attaining an almost flat response from 1.5 kHz up to 15 kHz. As a proof-of-concept for dynamic audio signal detection, a broadband acoustic signal was also reconstructed with significant gain, demonstrating the usefulness of the introduced formalism for high-precision sensing with polarimetric fiber sensors.

physics.optics↗

arXiv2021

Environmental Sensitivity of Fabry-Perot Microcavities Induced By Layered Graphene-Dielectric Hybrid Coatings

We propose a fiber-based environmental sensor that exploits the reflection phase shift tunability provided by the use of layered coatings composed of dielectric slabs spaced by conducting membranes. A transfer matrix study is done in a simplified theoretical model, for which an enhanced sensitivity of the reflection interference pattern to the output medium is demonstrated, in the typical refractive index range of liquid media. An experimental configuration using a cascaded Fabry-Perot microcavity coated by a graphene oxide/polyethylenimine (GO/PEI) multilayered structure is demonstrated. Its cost effective chemical production method makes graphene oxide-based hybrid coatings excellent candidates for future real-life sensing devices.

physics.optics↗