arXiv subjects

Cenk Yanik

Publications and source records attributed to Cenk Yanik.

10 recordsLinked to original sources

arXiv2025

Spin-Torque-Driven Non-uniform Dynamics of an Antivortex Core in Truncated Astroid Shaped Nanomagnets

Spin textures that are not readily available in the domain structures of continuous magnetic thin films can be stabilized when patterned to micro/nano scales due to the dominant effect of dipolar magnetic interactions. Fabrication of such devices enables a thorough study of their RF dynamics excited by highly concentrated spin-polarized/pure-spin currents. For this purpose, in this study, we have employed a truncated astroid geometry to achieve stable magnetic antivortex core nucleation/annihilation which was detectable using the anisotropic magnetoresistance (AMR) at various temperatures. Furthermore, by depositing a soft magnetic thin film (20 nm thick permalloy) capped with a heavy-metal 2nm Pt layer, we were able to probe the spin orbit torque induced excitations accompanied by self-torque due to half-antivortex cores reminiscent of an isolated-antivortex, yielding GHz frequency oscillations with high quality factors (~50000). The observed RF oscillations can be attributed to a non-uniform domain wall oscillation mode close to the stable-antivortex core nucleation site as seen in micromagnetic simulations. This fundamental study of antivortex core response to spin currents is crucial for the assessment of their potential applications in high frequency spintronic devices such as reservoir computers.

cond-mat.mes-hall↗

arXiv2024

Ultrafast Reservoir Computing based on Nonlinear Nanomechanical Resonators at Ambient Conditions

Reservoir computing offers an energy-efficient alternative to deep neural networks (DNNs) by replacing complex hidden layers with a fixed nonlinear system and training only the final layer. This work investigates nanoelectromechanical system (NEMS) resonators for reservoir computing, utilizing inherent nonlinearities and the fading memory effect from NEMS's transient response. This approach transforms input data into a higher-dimensional space for effective classification. The smaller size and higher operating frequencies of the NEMS resonators enable faster processing rates than recent demonstrations with micromechanical systems, while their compact footprint and ability to operate under ambient conditions simplify integration into practical applications. Through an MNIST handwritten digit recognition test, this system achieved 90% accuracy with a 3.3-microsecond processing time per pixel, highlighting the potential for various applications that require efficient and fast information processing in resource-constrained environments.

physics.app-ph↗

arXiv2023

Isotropic gap formation, localization, and waveguiding in mesoscale Yukawa-potential amorphous structures

Amorphous photonic structures are mesoscopic optical structures described by electrical permittivity distributions with underlying spatial randomness. They offer a unique platform for studying a broad set of electromagnetic phenomena, including transverse Anderson localization, enhanced wave transport, and suppressed diffusion in random media. Despite this, at a more practical level, there is insufficient work on both understanding the nature of optical transport and the conditions conducive to vector-wave localization in these planar structures, as well as their potential applications to photonic nanodevices. In this study, we fill this gap by investigating experimentally and theoretically the characteristics of optical transport in a class of amorphous photonic structures and by demonstrating their use to some basic waveguiding nanostructures. We demonstrate that these 2-D structures have unique isotropic and asymmetric band gaps for in-plane propagation, controlled from first principles by varying the scattering strength and whose properties are elucidated by establishing an analogy between photon and carrier transport in amorphous semiconductors. We further observe Urbach band tails in these random structures and uncover their relation to frequency- and disorder-dependent Anderson-like localized modes through the modified Ioffe-Regel criterion and their mean free path - localization length character. Finally, we illustrate that our amorphous structures can serve as a versatile platform in which photonic devices such as disorder-localized waveguides can be readily implemented.

physics.optics↗

arXiv2023

Atmospheric Pressure Mass Spectrometry by Single-Mode Nanoelectromechanical Systems

Weighing particles above MegaDalton mass range has been a persistent challenge in commercial mass spectrometry. Recently, nanoelectromechanical systems-based mass spectrometry (NEMS-MS) has shown remarkable performance in this mass range, especially with the advance of performing mass spectrometry under entirely atmospheric conditions. This advance reduces the overall complexity and cost, while improving the limit of detection. However, this technique required the tracking of two mechanical modes, and the accurate knowledge of mode shapes which may deviate from their ideal values especially due to air damping. Here, we used a NEMS architecture with a central platform, which enables the calculation of mass by single mode measurements. Experiments were conducted using polystyrene and gold nanoparticles to demonstrate the successful acquisition of mass spectra using a single mode, with improved areal capture efficiency. This advance represents a step forward in NEMS-MS, bringing it closer to becoming a practical application for mass sensing of nanoparticles.

physics.app-ph↗

arXiv2021

Atmospheric Pressure Mass Spectrometry of Single Viruses and Nanoparticles by Nanoelectromechanical Systems

Mass spectrometry of intact nanoparticles and viruses can serve as a potent characterization tool for material science and biophysics. Inaccessible by widespread commercial techniques, the mass of single nanoparticles and viruses (>10MDa) can be readily measured by NEMS (Nanoelectromechanical Systems) based Mass Spectrometry, where charged and isolated analyte particles are generated by Electrospray Ionization (ESI) in air and transported onto the NEMS resonator for capture and detection. However, the applicability of NEMS as a practical solution is hindered by their miniscule surface area, which results in poor limit-of-detection and low capture efficiency values. Another hindrance is the necessity to house the NEMS inside complex vacuum systems, which is required in part to focus analytes towards the miniscule detection surface of the NEMS. Here, we overcome both limitations by integrating an ion lens onto the NEMS chip. The ion lens is composed of a polymer layer, which charges up by receiving part of the ions incoming from the ESI tip and consequently starts to focus the analytes towards an open window aligned with the active area of the NEMS electrostatically. With this integrated system, we have detected the mass of gold and polystyrene nanoparticles under ambient conditions and with two orders-of-magnitude improvement in capture efficiency compared to the state-of-the-art. We then applied this technology to obtain the mass spectrum of SARS-CoV-2 and BoHV-1 virions. With the increase in analytical throughput, the simplicity of the overall setup and the operation capability under ambient conditions, the technique demonstrates that NEMS Mass Spectrometry can be deployed for mass detection of engineered nanoparticles and biological samples efficiently.

physics.ins-det↗

arXiv2021

Strong localization in a suspended monolayer graphene by intervalley scattering

A gate induced insulating behavior at zero magnetic field is observed in a high mobility suspended monolayer graphene near the charge neutrality point. The graphene device initially cleaned by a current annealing technique was undergone a thermo-pressure cycle to allow short range impurities to be adsorbed directly on the ultra clean graphene surface. The adsorption process generated a strong temperature and electric field dependent behavior on the conductance of the graphene device. The conductance around the neutrality point is observed to be reduced from around $e^2/h$ at 30 K to $\sim0.01~e^2/h$ at 20 mK. A direct transition from insulator to quantum Hall conductor within $\approx0.4~T$ accompanied by broken-symmetry-induced $ν=0,\pm1$ plateaux confirms the presence of intervalley scatterers.

cond-mat.mes-hall↗

arXiv2019

Full Electrostatic Control of Nanomechanical Buckling

Buckling at the micro and nanoscale generates distant bistable states which can be beneficial for sensing, shape-reconfiguration and mechanical computation applications. Although different approaches have been developed to access buckling at small scales, such as the use heating or pre-stressing beams, very little attention has been paid so far to dynamically and precisely control all the critical bifurcation parameters, the compressive stress and the lateral force on the beam. Precise and on-demand generation of compressive stress on individually addressable microstructures is especially critical for morphologically reconfigurable devices. Here, we develop an all-electrostatic architecture to control the compressive force, as well as the direction and amount of buckling, without significant heat generation on micro/nano structures. With this architecture, we demonstrated fundamental aspects of device function and dynamics. By applying voltages at any of the digital electronics standards, we have controlled the direction of buckling. Lateral deflections as large as 12% of the beam length were achieved. By modulating the compressive stress and lateral electrostatic force acting on the beam, we tuned the potential energy barrier between the post-bifurcation stable states and characterized snap-through transitions between these states. The proposed architecture opens avenues for further studies that can enable efficient actuators and multiplexed shape-shifting devices.

physics.app-ph↗

arXiv2019

Nonlinear Nanomechanical Mass Spectrometry at the Single-Nanoparticle Level

Nanoelectromechanical Systems (NEMS) have emerged as a promising technology for performing the mass spectrometry of large biomolecules and nanoparticles. As nanoscale objects land on NEMS sensor one by one, they induce resolvable shifts in the resonance frequency of the sensor proportional to their weight. The operational regime of NEMS sensors is often limited by the onset-of-nonlinearity, beyond which the highly sensitive schemes based on frequency tracking by phase-locked loops cannot be readily used. Here, we develop a measurement architecture to operate at the nonlinear regime and measure frequency shifts induced by analytes in a rapid and sensitive manner. We used this architecture to individually characterize the mass of gold nanoparticles and verified the results by performing independent measurements of the same nanoparticles based on linear mass sensing. Once the feasibility of the technique is established, we have obtained the mass spectrum of a 20 nm gold nanoparticle sample by individually recording about five hundred single particle events using two modes working sequentially in the nonlinear regime. The technique obtained here can be used for thin nanomechanical structures which possess a limited dynamic range.

cond-mat.mes-hall↗

arXiv2017

Observation of Magnetic Radial Vortex Nucleation in a Multilayer Stack with Tunable Anisotropy

Recently discovered exotic magnetic configurations, namely magnetic solitons appearing in the presence of bulk or interfacial Dzyaloshinskii-Moriya Interaction (i-DMI), have excited scientists to explore their potential applications in emerging spintronic technologies such as race-track magnetic memory, spin logic, radio frequency nano-oscillators and sensors. Such studies are motivated by their foreseeable advantages over conventional micro-magnetic structures due to their small size, topological stability and easy spin-torque driven manipulation with much lower threshold current densities giving way to improved storage capacity, and faster operation with efficient use of energy. In this work, we show that in the presence of i-DMI in Pt/CoFeB/Ti multilayers by tuning the magnetic anisotropy (both in-plane and perpendicular-to-plane) via interface engineering and postproduction treatments, we can stabilize a variety of magnetic configurations such as Néel skyrmions, horseshoes and most importantly for the first time, the recently predicted isolated radial vortices at room temperature and under zero bias field. Especially, the radial vortex state with its absolute convergence to or divergence from a single point can potentially offer exciting new applications such as particle trapping/detrapping in addition to magnetoresistive memories with efficient switching, where the radial vortex state can act as a source of spin-polarized current with radial polarization.

cond-mat.mes-hall↗

arXiv2013

Local breakdown of the quantum Hall effect in narrow single layer graphene Hall devices

We have analyzed the breakdown of the quantum Hall effect in 1 micrometer wide Hall devices fabricated from an exfoliated monolayer graphene transferred on SiOx. We have observed that the deviation of the Hall resistance from its quantized value is weakly dependent on the longitudinal resistivity up to current density of 5 A/m, where the Hall resistance remains quantized even when the longitudinal resistance increases monotonously with the current. Then a collapse in the quantized resistance occurs while longitudinal resistance keeps its gradual increase. The exponential increase of the conductivity with respect to the current suggests impurity mediated inter-Landau level scattering as the mechanism of the breakdown. The results are interpreted as the strong variation of the breakdown behavior throughout the sample due to the randomly distributed scattering centers that mediates the breakdown.

cond-mat.mes-hall↗