arXiv subjects

Ch. Schmidt

Publications and source records attributed to Ch. Schmidt.

At least 37 records · Page 2Linked to original sources

arXiv2011

Photoproduction of $ω$ mesons on nuclei near the production threshold

The photoproduction of $ω$ mesons on LH_2, C and Nb has been studied for incident photon energies from 900 to 1300 MeV using the CB/TAPS detector at ELSA. The $ω$ line shape does not show any significant difference between the LH_2 and the Nb targets. The data are compared with results of transport calculations that predict a sensitivity of the $ω$ line shape to in-medium modifications near the production threshold on a free nucleon of $E_γ^{lab}$ = 1109 MeV.}

nucl-ex↗

arXiv2010

In-medium $ω$ mass from the $γ+ Nb \to π^{0}γ+ X$ reaction

Data on the photoproduction of $ω$ mesons on nuclei have been re-analyzed in a search for in-medium modifications. The data were taken with the Crystal Barrel(CB)/TAPS detector system at the ELSA accelerator facility in Bonn. First results from the analysis of the data set were published by D. Trnka et al. in Phys. Rev. Lett 94 (2005) 192303 \cite{david}, claiming a lowering of the $ω$ mass in the nuclear medium by 14$%$ at normal nuclear matter density. The extracted $ω$ line shape was found to be sensitive to the background subtraction. For this reason a re-analysis of the same data set has been initiated and a new method has been developed to reduce the background and to determine the shape and absolute magnitude of the background directly from the data. Details of the re-analysis and of the background determination are described. The $ω$ signal on the $Nb$ target, extracted in the re-analysis, does not show a deviation from the corresponding line shape on a $LH_2$ target, measured as reference. The earlier claim of an in-medium mass shift is thus not confirmed. The sensitivity of the $ω$ line shape to different in-medium modification scenarios is discussed.

nucl-ex↗

arXiv2010

Effects of high pressure on the physical properties of MgB2

The synthesis of MgB2-based materials under high pressure gave the possibility to suppress the evaporation of magnesium and to obtain near theoretically dense nanograined structures with high superconducting, thermal conducting, and mechanical characteristics: critical current densities of 1.8-1.0 \cdot 106 A/cm2 in the self field and 103 A/cm2 in a magnetic field of 8 T at 20 K, 5-3 \cdot 105 A/cm2 in self field at 30 K, the corresponding critical fields being HC2 = 15 T at 22 K and irreversible fields Hirr =13 T at 20 K, and Hirr =3.5 T at 30 K, thermal conduction of 53+/-2 W/(m \cdot κ), the Vickers hardness Hv=10.12+/-0.2 GPa under a load of 148.8 N and the fracture toughness K1C = 7.6+/-2.0 MPa m0.5 under the same load, the Young modulus E=213 GPa. Estimation of quenching current and AC losses allowed the conclusion that highpressure-prepared materials are promising for application in transformer-type fault current limiters working at 20-30 K.

cond-mat.supr-con↗

arXiv2010

Photoproduction of meson pairs: First measurement of the polarization observable I^s

The polarization observable I^s, a feature exclusive to the acoplanar kinematics of multi-meson final states produced via linearly polarized photons, has been measured for the first time. Results for the reaction g p -> p pi0 eta are presented for incoming photon energies between 970 MeV and 1650 MeV along with the beam asymmetry I^c. The comparably large asymmetries demonstrate a high sensitivity of I^s to the dynamics of the reaction. Fits using Bonn-Gatchina partial wave analysis demonstrate that the new polarization observables carry significant information on the contributing partial waves.

nucl-ex↗

arXiv2009

Nanostructural Superconducting Materials for Fault Current Limiters and Cryogenic Electrical Machines

Materials of the Y-Ba-Cu-O (melt-textured YBa2Cu3O7-d-based materials or MT-YBCO) and Mg-B-O (MgB2-based materials) systems with high superconducting performance, which can be attained due to the formation of regularly distributed nanostructural defects and inhomogenities in their structure can be effectively used in cryogenic technique, in particular in fault current limiters and electrical machines (electromotors, generators, pumps for liquid gases, etc.). The developed processes of high-temperature (900-800 oC) oxygenation under elevated pressure (16 MPa) of MT-YBCO and high-pressure (2 GPa) synthesis of MgB2-based materials allowed us to attain high SC (critical current densities, upper critical fields, fields of irreversibility, trapped magnetic fields) and mechanical (hardness, fracture toughness, Young modulus) characteristics. It has been shown that the effect of materials properties improvement in the case of MT-YBCO was attained due to the formation of high twin density (20-22 micron-1), prevention of macrockracking and reduction (by a factor of 4.5) of microcrack density, and in the case of MgB2-based materials due to the formation of oxygen-enriched as compared to the matrix phase fine-dispersed Mg-B-O inhomogenities as well as inclusions of higher borides with near-MgB12 stoichiometry in the Mg-B-O matrix (with 15-37 nm average grain sizes). The possibility is shown to obtain the rather high Tc (37 K) and critical current densities in materials with MgB12 matrix (with 95 percent of shielding fraction as calculated from the resistant curve).

cond-mat.supr-con↗

arXiv2009

Inhomogeneity of Magnesium Diboride Structure and its Effect on Critical Current Density

The influence of the oxygen segregation into Mg-B-O inclusions (which are oxygen enriched as compared to the matrix material) and the formation of boron enriched phases (with near MgB12 composition) in MgB2 structure on pinning in magnesium diboride and the effect of SiC and Ti alloying on the formation of structural inhomogenities in MgB2 are discussed. A nanostructural material of near theoretical density (2.7 g/cm3) based on MgB2-SiC (10 wt. percents of 200-800 nm SiC was added), which is characterized by high jc (1000000 A/cm2 in 1 T - 100000 A/cm2 in 3.5 T at 20 K and 100000 A/cm2 at 35 K) has been synthesized at 2 GPa.

cond-mat.supr-con↗

arXiv2008

Modification of the $ω$-Meson Lifetime in Nuclear Matter

The photo production of $ω$ mesons on the nuclei C, Ca, Nb and Pb has been measured using the Crystal Barrel/TAPS detector at the ELSA tagged photon facility in Bonn. The dependence of the $ω$ meson cross section on the nuclear mass number has been compared with three different types of models, a Glauber analysis, a BUU analysis of the Giessen theory group and a calculation by the Valencia theory group. In all three cases, the inelastic $ω$ width is found to be $130-150 \rm{MeV/c^2}$ at normal nuclear matter density for an average 3-momentum of 1.1 GeV/c. In the restframe of the $ω$ meson, this inelastic $ω$ width corresponds to a reduction of the $ω$ lifetime by a factor $\approx 30$. For the first time, the momentum dependent $ω$N cross section has been extracted from the experiment and is in the range of 70 mb.

nucl-ex↗

arXiv2005

QCD at non-zero temperature and density from the lattice

The study of systems as diverse as the cores of neutron stars and heavy-ion collision experiments requires the understanding of the phase structure of QCD at non-zero temperature, T, and chemical potential, mu_q. We review some of the difficulties of performing lattice simulations of QCD with non-zero mu_q, and outline the re-weighting method used to overcome this problem. This method is used to determine the critical endpoint of QCD in the (mu_q,T) plane. We study the pressure and quark number susceptibility at small mu_q.

hep-lat↗

arXiv2003

High-pressure synthesis of MgB2 with addition of Ti

The MgB2 - based material high-pressure synthesized at 2 GPa and 800 C for 1 h from Mg and B (taken in the stoichiometry ratio of MgB2) with addition of 2-10 wt% of Ti demonstrated the critical current density (jc) higher than 100 kA/cm^2 at 33 K in 0 T field and at 20 K up to 3 T. At 20 K the critical current density higher than 10 kA/cm^2 was observed up to 5 T field. In the magnetic field up to 2 T high-pressure synthesized MgB2 (with 10 % of Ti) at 20 K behaves in the same manner as Nb3Sn at 4.2 K. In XRD patterns of magnesium diboride with the Ti added, we observed no evidence of titanium diboride or unreacted titanium and only one compound with titanium was identified, namely, titanium dihydride TiH2 (or more strictly TiH1.924). The sample with the highest critical current density and irreversible field in the temperature range of 25-10 K contained some amount of pure Mg that was rather homogeneously dispersed in the material. The critical currents and irreversible fields of magnesium diboride synthesized at high pressure with Ti added are higher than those in the case where Ta has been added.

cond-mat.supr-con↗

arXiv2002

The quark mass and $μ$ dependence of the QCD chiral critical point

In order to study the QCD chiral critical point we investigate Binder Cumulants of the chiral condensate. The results were obtained from simulations of 3 and 2+1 flavors of standard staggered fermions and 3 flavors of p4 improved staggered fermions. The quark masses used are close to the physical quark mass. To extract the dependence on quark mass and chemical potential we apply a new reweighting technique based on a Taylor expansion of the action. The reweighting accuracy is ${\cal O}(m)$ for the standard and ${\cal O}(m^2)$, ${\cal O}(μ^2)$ for the p4 action.

hep-lat↗

arXiv2002

The QCD phase transition at high temperature and low density

We study the thermal properties of QCD in the presence of a small quark chemical potential $μ$. Derivatives of the phase transition point with respect to $μ$ are computed at $μ=0$ for 2 and 3 flavors of p-4 improved staggered fermions on a $16^3\times4$ lattice. Moreover we contrast the case of isoscalar and isovector chemical potentials, quantify the effect of $μ\not=0$ on the equation of state, and comment on the screening effect by dynamical quarks and the complex phase of the fermion determinant in QCD with $μ\not=0$.

hep-lat↗

arXiv2002

The QCD thermal phase transition in the presence of a small chemical potential

We propose a new method to investigate the thermal properties of QCD with a small quark chemical potential $μ$. Derivatives of the phase transition point with respect to $μ$ are computed at $μ=0$ for 2 flavors of p-4 improved staggered fermions with $ma=0.1,0.2$ on a $16^3\times4$ lattice. The resulting Taylor expansion is well behaved for the small values of $μ_{\rm q}/T_c\sim0.1$ relevant for RHIC phenomenology, and predicts a critical curve $T_c(μ)$ in reasonable agreement with estimates obtained using exact reweighting. In addition, we contrast the case of isoscalar and isovector chemical potentials, quantify the effect of $μ\not=0$ on the equation of state, and comment on the complex phase of the fermion determinant in QCD with $μ\not=0$.

hep-lat↗

arXiv2002

QCD at non-zero chemical potential and temperature from the lattice

A study of QCD at non-zero chemical potential, mu, and temperature, T, is performed using the lattice technique. The transition temperature (between the confined and deconfined phases) is determined as a function of mu and is found to be in agreement with other work. In addition the variation of the pressure and energy density with mu is obtained for small positive mu. These results are of particular relevance for heavy-ion collision experiments.

hep-ph↗

arXiv2002

Synthesis and Sintering of MgB2 Under High Pressure

High-pressure (HP) synthesis and sintering are promising methods for manufacturing of the bulk MgB2 superconductive material. The available high-pressure apparatuses with 100 cm3 working volume can allow us to use the bulk MgB2 for practical applications such as electromotors, fly-wheels, bearings, etc. We have found that the Ta presence during HP synthesis (especially) or sintering process (in the form of a foil that covered the sample and as an addition of Ta powder of about 2-10 wt.% to the starting mixture of B and Mg or to MgB2 powder) increases the critical current density (jc) in the magnetic fields up to 10 T and the fields of irreversibility (Hirr) of MgB2-based bulk materials. We observed the strong evidences that Ta absorbs hydrogen and nitrogen during synthesis and sintering to form Ta2H, TaH and TaN0.1 and prevents or reduces the formation of MgH2 (both with orthorhombic and tetragonal structures). Ta also essentially reduces the amount of impurity nitrogen in black Mg-B (most likely, MgB2) crystals of the matrix phase. The presence of Ta during synthesis allowed us to obtain a bulk materials with the following critical current densities jc in 1 T field: 570 kA/cm2 at 10 K, 350 kA/cm2 at 20 K and 40 kA/cm2 at 30 K. Besides, the materials demonstrated high mechanical characteristics (microhardness, fracture toughness, Young modulus).

cond-mat.supr-con↗

arXiv2001

Common features of deconfining and chiral critical points in QCD and the three state Potts model in an external field

In the presented study we investigated the second order endpoints of the lines of first order phase transitions which emerge for the QCD in the heavy and light quark mass regime and for the three-dimensional three state Potts model with an external field. We located the endpoints with Binder cumulants and constructed the energy-like and ordering field like observables. The joint probability distributions of these scaling fields and the values of the Binder cumulant confirm that all three endpoints belong to the universality class of the 3-dimensional Ising model.

hep-lat↗

arXiv2001

The Chiral Critical Point in 3-Flavour QCD

We determine the second order endpoint of the line of first order phase transitions, which occur in the light quark mass regime of 3-flavour QCD at finite temperature, and analyze universal properties of this chiral critical point. A detailed analysis of Binder cumulants and the joint probability distributions of energy like and ordering-field like observables confirms that the chiral critical point belongs to the universality class of the 3d Ising model. From a calculation with improved gauge and staggered fermion actions we estimate that the transition is first order for pseudo-scalar meson masses less than about 200 MeV.

hep-lat↗

arXiv2001

The high-pressure synthesis of MgB2

The high-pressure synthesis is one of the most promising methods to produce MgB2 superconductive (SC) material. The available high-pressure apparatuses have working volume up to 100 cm3 which allows samples up to 60 mm in diameter to be manufactured. By a short-term (1h) high-pressure (2GPa) synthesis from Mg and B we have obtained samples 2.4-2.5 g/cm3 in density, 12.1-15.6 GPa in microhardness (under 4.96 N load), 170-200 kA/cm2 at 10 K and 58-62 kA/cm2 at 20 K in critical current density at a magnetic field of 1T. Samples demonstrated 8.5 T irreversible field at 10 K and 5.5 T at 20 K. The Ta positive influence on SC properties of MgB2 has been observed.

cond-mat.supr-con↗

arXiv2001

The Chiral Critical Point in 3-Flavour QCD

We determine the second order endpoint of the line of first order phase transitions, which occur in the light quark mass regime of 3-flavour QCD at finite temperature, and analyze universal properties of this chiral critical point. A detailed analysis of Binder cumulants and the joint probability distributions of energy like and ordering-field like observables confirms that the chiral critical point belongs to the universality class of the three dimensional Ising model. From a calculation with improved gauge and staggered fermion actions we estimate that the transition is first order for pseudo-scalar meson masses less than about 200 MeV.

hep-lat↗