arXiv subjects

Chander Shekhar Sharma

Publications and source records attributed to Chander Shekhar Sharma.

13 recordsLinked to original sources

arXiv2026

Asymmetric freezing of a sliding droplet on an inclined surface

We investigate the asymmetric freezing of a liquid droplet sliding on an inclined cold surface using numerical simulations based on the lubrication approximation. The combined effects of gravity, capillarity, and solidification kinetics on droplet motion, interfacial deformation, and the resulting frozen morphology are examined through systematic variations in substrate inclination, wettability, effective Bond number, and Stefan number. Our results show that sliding prior to and during the early stages of freezing plays a dominant role in governing the asymmetry of the frozen droplet. A tilted ice cusp forms at the droplet tip due to the competition between gravitational forces and capillary resistance, with its orientation and magnitude strongly dependent on substrate wettability and inclination. Greater inclination and increased wettability enhance asymmetry in droplet morphology. Further, highly wetting substrates favor capillary-driven retraction and induce transient liquid motion opposite to gravity during freezing. The evolution of contact-angle hysteresis at both the solid surface and the liquid-ice interface underscores the importance of early-time dynamics, when the unfrozen liquid remains mobile and gravitational effects are most pronounced. Decomposition of the liquid motion into capillary and gravity-driven contributions provides physical insight into contact-line pinning, receding-edge thinning, and the development of asymmetric liquid-ice contact angles. Increasing the Stefan number accelerates freezing, limits sliding-induced deformation, and reduces both the cusp angle and the post-freezing contact-angle contrast. Overall, this study establishes a physical framework for understanding the morphology of frozen droplets on inclined substrates.

physics.flu-dyn↗

arXiv2025

Pinning mediated coalescence-induced lateral droplet motion on nanotextured superhydrophobic surface

Droplets coalescing on a superhydrophobic surface exhibit coalescence-induced droplet jumping. However, water vapor condensing on a superhydrophobic surface can result in simultaneous formation of condensate droplets with two distinct wetting states, cassie state (CS) and partially wetting (PW) state. Droplets in PW state exhibit high contact angle but are connected to the substrate though a thin liquid condensate column. Coalescence between CS and PW droplets has been recently identified as a possible mechanism for generating droplets exhibiting in-plane roaming motion during dropwise condensation on nanotextured superhydrophobic surfaces. Here, we systematically investigate this phenomenon through experiments on coalescence between sessile droplets in CS and PW state on a nanostructured superhydrophobic surface endowed with a micro-scale hydrophilic spot. Here, a sessile droplet carefully placed on the hydrophilic spot simulates the PW state. Overall, our investigations demonstrate that when a CS droplet coalesces with a PW droplet pinned to a hydrophilic defect, the interaction generates substantial in-plane momentum. We find that when the coalescing CS and PW droplets are nearly of the same size and about ~3 to ~3.5 times the size of the hydrophilic spot pinning the PW droplet, the vertical momentum generation is nearly completely suppressed, and the resulting maxima in in-plane momentum results in detachment of merged droplet from hydrophilic spot and its subsequent in-plane motion.

physics.flu-dyn↗

arXiv2025

Non-coalescence and in-plane momentum generation in sessile droplet clusters

Intuitively, droplets in proximity merge when brought into contact. However, under certain conditions, they may not coalesce due to the entrapment of an interstitial gas film. Non-coalescence between water droplets has so far been observed during collisions of droplets moving with relative centroidal velocity, or in the presence of specific enabling effects such as high intervening gas pressures, surfactants, or large droplet sizes (diameter $\gtrsim 1~\mathrm{mm}$). Here, we report non-coalescence between water droplets over a much wider range of droplet diameters, from millimeters to as small as 100 microns, without the need for any of the above factors. Such non-coalescence occurs in sessile droplet clusters on water-repellent surfaces. When any two droplets in a cluster coalesce, the evolving interface of the coalescing droplets comes in apparent contact with other neighbouring droplets in the cluster, but does not necessarily trigger further coalescence. In fact, such apparent contact can manifest as a bouncing interaction, and depending on the initial geometric arrangement of droplets, it can result in significant lateral momentum generation, consequently leading to spontaneous in-plane self-propulsion of the participating droplets. The energy conversion efficiency of this process reaches as high as 9\% for closely packed clusters of three sessile droplets and increases further with an increase in the number of participating droplets. The resulting self-propulsion of such small droplets reveals a new pathway for passive droplet removal and surface renewal during dropwise condensation on superhydrophobic surfaces, critical in multiple applications.

physics.flu-dyn↗

arXiv2025

Evaporation of sessile drops on a heated superhydrophobic substrate

We experimentally investigate the evaporation dynamics of sessile water droplets on a micro-nano textured superhydrophobic aluminum substrate at various temperatures using shadowgraphy imaging. By comparing the evaporation behavior of two droplets placed side-by-side with that of an isolated droplet, we find that droplets in the two-drop system evaporate more slowly due to the vapor shielding effect, which increases vapor concentration between the droplets. This leads to asymmetric evaporation and longer lifetimes, particularly at room temperature compared to higher temperatures. At room temperature, the isolated droplet primarily follows a constant contact angle (CCA) mode, with occasional stick-slip events. The two-drop system predominantly exhibits CCA mode for most of its lifetime, with mixed-mode evaporation and some stick-slip behavior. At elevated temperatures, the isolated droplet maintains a nearly constant contact angle for the first half of its lifetime, transitioning to a mixed evaporation mode with occasional stick-slip events. In contrast, the two-drop system follows a mixed evaporation mode throughout, with occasional stick-slip behavior. Furthermore, a comprehensive theoretical model that accounts for diffusion, evaporative cooling, and convection accurately captures the evaporation dynamics of sessile droplets on a superhydrophobic substrate in both isolated and paired configurations at elevated substrate temperatures. In contrast, a diffusion-based model alone adequately describes the evaporation behaviour at room temperature.

physics.flu-dyn↗

arXiv2024

Evaporation-driven coalescence of two droplets undergoing freezing

We examine the evaporation-induced coalescence of two droplets undergoing freezing by conducting numerical simulations employing the lubrication approximation. When two sessile drops undergo freezing in close vicinity over a substrate, they interact with each other through the gaseous phase and the simultaneous presence of evaporation/condensation. In an unsaturated environment, the evaporation flux over the two volatile sessile drops is asymmetric, with lower evaporation in the region between the two drops. This asymmetry in the evaporation flux generates an asymmetric curvature in each drop, which results in a capillary flow that drives the drops closer to each other, eventually leading to their coalescence. This capillary flow, driven by evaporation, competes with the upward movement of the freezing front, depending on the relative humidity in the surrounding environment. We found that higher relative humidity reduces the evaporative flux, delaying capillary flow and impeding coalescence by restricting contact line motion. For a constant relative humidity, the substrate temperature governs the coalescence phenomenon, and resulting condensation can accelerate this process. Interestingly, lower substrate temperatures are observed to facilitate faster propagation of the freezing front, which, in turn, restricts coalescence.

physics.flu-dyn↗

arXiv2023

Freezing of sessile droplet and frost halo formation

The freezing of a sessile droplet unveils fascinating physics, characterised by the emergence of a frost halo on the underlying substrate, the progression of the liquid-ice interface, and the formation of a cusp-like morphology at the tip of the droplet. We investigate the freezing of a volatile sessile droplet, focusing on the frost halo formation, which has not been theoretically explored. The formation of the frost halo is associated with the inherent evaporation process in the early freezing stages. We observe a negative evaporation flux enveloping the droplet in the initial stages, which indicates that vapour produced during freezing condenses on the substrate close to the contact line, forming a frost halo. The condensate accumulation triggers re-evaporation, resulting in a temporal shift of the frost halo region away from the contact line. Eventually, it disappears due to the diffusive nature of the water vapour far away from the droplet. We found that increasing the relative humidity increases the lifetime of the frost halo due to a substantial reduction in evaporation that prolonged the presence of net condensate on the substrate. Increasing liquid volatility increases the evaporation flux, and condensation occurs closer to the droplet, as a higher amount of vapour is in the periphery of the droplet. We also found that decreasing the thermal conductivity of the substrate increases the total freezing time. The slower freezing process is accompanied by increased vaporized liquid, resulting in condensation with its concentration reaching supersaturation.

physics.flu-dyn↗

arXiv2023

Condensate droplet roaming on nanostructured superhydrophobic surfaces

Jumping of coalescing condensate droplets from superhydrophobic surfaces is an interesting phenomenon which yields marked heat transfer enhancement over the more explored gravity-driven droplet removal mode in surface condensation, a phase change process of central interest to applications ranging from energy to water harvesting. However, when condensate microdroplets coalesce, they can also spontaneously propel themselves omnidirectionally on the surface independent of gravity and grow by feeding from droplets they sweep along the way. Here we observe and explain the physics behind this phenomenon of roaming of coalescing condensate microdroplets on solely nanostructured superhydrophobic surfaces, where the microdroplets are orders of magnitude larger than the underlaying surface nanotexture. We quantify and show that it is the inherent asymmetries in droplet adhesion during condensation, arising from the stochastic nature of nucleation within the nanostructures, that generates the tangential momentum driving the roaming motion. Subsequent dewetting during this conversion initiates a vivid roaming and successive coalescence process, preventing condensate flooding of the surface, and enhancing surface renewal. Finally, we show that the more efficient conversion process of roaming from excess surface energy to kinetic energy results in significantly improved heat transfer efficiency over condensate droplet jumping, the mechanism currently understood as maximum.

physics.flu-dyn↗

arXiv2023

Controlled coalescence-induced droplet jumping on flexible superhydrophobic substrates

Sessile droplets coalescing on superhydrophobic substrates spontaneously jump from the surface. In this process, the excess surface energy available at the initiation of coalescence overcomes the minimal surface adhesion and manifests as sufficient kinetic energy to propel the droplets away from the substrate. Here, we show that the coalescence induced droplet jumping velocity is significantly curtailed if the superhydrophobic substrate is flexible in nature. Through detailed experimental measurements and numerical simulations, we demonstrate that the droplet jumping velocity and jumping height can be reduced by as much as 40 % and 64%, respectively, by synergistically tuning the substrate stiffness and substrate frequency. We show that this hitherto unexplored aspect of droplet coalescence jumping can be gainfully exploited in water harvesting from dew and fog harvesting. Additionally, through an exemplar butterfly wing substrate, we demonstrate that this effect is likely to manifest on many natural superhydrophobic substrates due to their inherent flexibility.

physics.flu-dyn↗

arXiv2023

Biomimetic Micropillar Wick for Enhanced Thin-Film Evaporation

Sustainable liquid cooling solutions are recognized as the future of thermal management in the chip industry. Among them, the phase change heat transfer devices such as heat pipes and vapour chambers have shown tremendous potential. These devices rely on the physics of capillary-driven thin-film evaporation which is inherently coupled with the design and optimization of the evaporator wicks used in these devices. Here, we introduce a biomimetic evaporator wick design inspired by the peristome of the Nepenthes alata that can achieve significantly enhanced evaporative cooling. It consists of array of micropillars with multiple wedges along the sidewall of each micropillar. The efficacy of the wedged micropillar is evaluated based on a validated numerical model on the metrics of dryout heat flux and effective heat transfer coefficient. The wedge angle is chosen such that wedged micropillars cause liquid filaments to rise along the micropillar vertical walls. This results in a significant increase in thin-film area for evaporation. Additionally, the large mean curvature of the liquid meniscus produces strong capillary pumping pressure and simultaneously, the wedges increase the overall permeability of the wick. Consequently, our model predicts that the wedged micropillar wick can attain ~234% enhancement of dryout heat flux compared to a conventional cylindrical micropillar wick of similar geometrical dimensions. Moreover, the wedged micropillars can also attain higher effective heat transfer coefficient under dryout conditions thus outperforming the cylindrical micropillar in terms of heat transfer efficiency. Our study provide insight into the design and capability of the biomimetic wedged micropillars as an efficient evaporator wick for various thin-film evaporation applications.

physics.flu-dyn↗

arXiv2022

Out-of-Plane Biphilic Surface Structuring for Enhanced Capillary-Driven Dropwise Condensation

Rapid and sustained condensate droplet departure from a surface is key towards achieving high heat transfer rates in condensation, a physical process critical to a broad range of industrial and societal applications. Despite progress in enhancing condensation heat transfer through inducing its dropwise mode with hydrophobic materials, sophisticated surface engineering methods that can lead to further enhancement of heat transfer are still highly desirable. Here, by employing a three-dimensional, multiphase computational approach, we present an effective out-of-plane biphilic surface topography, that reveals an unexplored capillarity-driven departure mechanism of condensate droplets. This texture consists of biphilic diverging micro-cavities wherein a matrix of small hydrophilic spots is placed at their bottom, that is, amongst the pyramid-shaped, superhydrophobic micro-textures forming the cavities. We show that an optimal combination of the hydrophilic spots and the angles of the pyramidal structures can achieve high deformational stretching of the droplets, eventually realizing an impressive slingshot-like droplet ejection process from the texture. Such a droplet departure mechanism has the potential to reduce the droplet ejection volume and thus enhance the overall condensation efficiency, compared to coalescence-initiated droplet jumping from other state-of-the-art surfaces. Simulations have shown that optimal pyramid-shaped biphilic micro-structures can provoke droplet self-ejection at low volumes, up to 56% lower compared to superhydrophobic straight pillars, revealing a promising new surface micro-texture design strategy towards enhancing condensation heat transfer efficiency and water harvesting capabilities.

physics.flu-dyn↗

arXiv2021

Enhancing condensation on soft substrates through bulk lubricant infusion

Soft substrates such as polydimethylsiloxane (PDMS) enhance droplet nucleation during the condensation of water vapour, because their deformability inherently reduces the energetic threshold for heterogeneous nucleation relative to rigid substrates. However, this enhanced droplet nucleation is counteracted later in the condensation cycle, when the viscoelastic dissipation inhibits condensate droplet shedding from the substrate. Here, we show that bulk lubricant infusion in the soft substrate is a potential pathway for overcoming this limitation. We demonstrate that even 5% bulk lubricant infusion in PDMS reduces viscoelastic dissipation in the substrate by more than 30 times and more than doubles the droplet nucleation density. We correlate the droplet nucleation and growth rate with the material properties controlled by design, i.e. the fraction and composition of uncrosslinked chains, shear modulus, and viscoelastic dissipation. Through in-situ, microscale condensation on the substrates, we show that the increase in nucleation density and reduction in pre-coalescence droplet growth rate is insensitive to the percentage of lubricant in PDMS. Our results indicate the presence of a lubricant layer on the substrate surface that cloaks the growing condensate droplets. We visualize the cloaking effect and show that lubricant infusion in PDMS significantly increases the rate of cloaking compared to PDMS without any lubricant infusion. Finally, we show that the overall enhanced condensation due to bulk lubricant infusion in PDMS leads to more than 40% increase in dewing on the substrate.

cond-mat.soft↗

arXiv2021

Ultra-Thin Lubricant-Infused Vertical Graphene Nanoscaffolds for High-Performance Dropwise Condensation

Lubricant-infused surfaces (LIS) are highly efficient in repelling water and constitute a very promising family of materials for condensation processes occurring in a broad range of energy applications. However, the performance of LIS in such processes is limited by the inherent thermal resistance imposed by the thickness of the lubricant and supporting surface structure, as well as by the gradual depletion of the lubricant over time. Here we present a remarkable, ultra-thin (~70 nm) and conductive LIS architecture, obtained by infusing lubricant into a vertically grown graphene nanoscaffold on copper. The ultra-thin nature of the scaffold, combined with the high in-plane thermal conductivity of graphene, drastically minimize earlier limitations, effectively doubling the heat transfer performance compared to a state-of-the-art CuO LIS surface. We show that the effect of the thermal resistance to the heat transfer performance of a LIS surface, although often overlooked, can be so detrimental that a simple nanostructured CuO surface can outperform a CuO LIS surface, despite film condensation on the former. The present vertical graphene LIS is also found to be resistant to lubricant depletion, maintaining stable dropwise condensation for at least ~7 hours with no significant change of advancing contact angle and contact angle hysteresis. The lubricant consumed by the vertical graphene LIS is 52.6% less than the existing state-of-the-art CuO LIS, making also the fabrication process more economical.

physics.app-ph↗

arXiv2020

Sprayable Thin and Robust Carbon Nanofiber Composite Coating for Extreme Jumping Dropwise Condensation Performance

Condensation of water on metallic surfaces is critical for multiple energy conversion processes. Enhancement in condensation heat transfer efficiency often requires surface texturing and hydrophobicity, usually achieved through coatings, to maintain dropwise condensation. However, such surface treatments face conflicting challenges of minimal coating thermal resistance, enhanced coating durability and scalable fabrication. Here we present a thin (~ 2 μm) polytetrafluoroethylene - carbon nanofiber nanocomposite coating which meets these challenges and sustains coalescence-induced jumping droplet condensation for extended periods under highly demanding condensation conditions. Coating durability is achieved through improved substrate adhesion by depositing a sub-micron thick aluminum primer layer. Carbon nanofibers in a polytetrafluoroethylene matrix increase coating thermal conductivity and promote spontaneous surface nano-texturing to achieve superhydrophobicity for condensate microdroplets. The coating material can be deposited through direct spraying, ensuring economical scalability and versatility for a wide range of substrates. We know of no other coating for metallic surfaces that is able to sustain jumping dropwise condensation under shear of steam at 111 degC flowing at ~ 3 m s-1 over the surface for 10 hours and dropwise condensation for an additional 50 hours. Up to ~ 900% improvement in condensation heat transfer coefficient is achieved compared to conventional filmwise condensation.

cond-mat.mtrl-sci↗