arXiv subjects

Chandra Raman

Publications and source records attributed to Chandra Raman.

15 recordsLinked to original sources

arXiv2026

Kinematic reversibility in a low Reynolds number cold atom fluid

We have investigated kinematic reversibility in a cold atom system under strongly overdamped conditions. In such systems, inertia is negligible, and for noninteracting rigid particles, inverting the external force causes a perfect reversal of individual particle trajectories. We used a magneto-optical trap (MOT) as a model low Reynolds number fluid and show the kinematic reversibility survives in the presence of interparticle interactions. In our experiment, we applied controlled external forces via a linearly ramped magnetic bias field and monitored the resulting cloud dynamics. Despite the complex three-dimensional rearrangement induced by the forces, the system exhibits precise reversibility when the force is reversed, consistent with Purcell's framework for kinematic reversibility in low Reynolds number hydrodynamics. Reversibility was not universal,however-- under certain MOT alignment conditions we have also observed clear deviations associated with system hysteresis. Our work shows that strongly dissipative cold atom fluids are a versatile and rich platform for exploring overdamped dynamics.

physics.atom-ph↗

arXiv2026

Enhanced stability from co-resonant cavities in a monolithic array

We demonstrate a micro-Fabry-P\'erot cavity array through laser etching of high-surface-quality mirrors onto a single fused silica substrate. A cavity finesse of $4750\pm 200$ was achieved with a simple array design with $500~\mu m$ cavity length, $100~\mu m$ diameter micromirrors and $300~\mu m$ transverse separation. Arrays with up to 12 cavities were simultaneously tested for single mode operation, and absolute frequency measurements correlated strongly with the etched depth as measured by profilometry. Simultaneous measurements of the absolute resonant frequency for neighboring cavities showed a factor of 5 common-mode cavity drift reduction. Arrays of such cavities can be employed in chip-scale cavity QED networks (current cooperativity estimates are at the border of strong coupling for $^{87}$Rb atoms, $C=1$) as well as for precise laser stabilization at nearby wavelengths on a chip.

physics.optics↗

arXiv2024

Compact Cavity-Enhanced Aerosol Detector using Incoherent Light Sources

We have realized a compact optical particle counter utilizing enhancement of light scattering within a high finesse Fabry-Perot optical cavity. In contrast to laser-based approaches such as cavity ringdown spectroscopy we use the light stream from both superluminescent and light-emitting diodes that have no longitudinal coherence. This eliminates the vibration sensitivity that is typical of laser-based cavity methods. The use of the transmission mode of detection allows us to reduce the cavity mirror separation to below 1 cm, with no obvious limit to miniaturization. Typical light scattering instruments are larger, in part due to their sensitivity to background signals from the light source. Our approach paves the way toward a new generation of compact and portable instruments. A simultaneous comparison of the scattering signals with a commercial particle counter shows that our cavity is also sensitive to ultrafine particles below 300 nm diameter that are typically not recorded in such counters.

physics.optics↗

arXiv2024

Deterministic photonic entanglement arising from non-Abelian quantum holonomy

Realizing deterministic, high-fidelity entangling interactions--of the kind that can be utilized for efficient quantum information processing--between photons remains an elusive goal. Here, we address this long-standing issue by devising a protocol for creating and manipulating highly-entangled superpositions of well-controlled states of light by using an on-chip photonic system that has recently been shown to implement three-dimensional, non-Abelian quantum holonomy. Our calculations indicate that a subset of such entangled superpositions are maximally-entangled, "volume-law" states, and that the underlying entanglement can be distilled and purified for applications in quantum science. Crucially, we generalize this approach to demonstrate the potentiality of deterministically entangling two arbitrarily high, $N$-dimensional quantum systems, by formally establishing a deep connection between the matrix representations of the unitary quantum holonomy--within energy-degenerate subspaces in which the total excitation number is conserved--and the $\left(2j+1\right)$-dimensional irreducible representations of the rotation operator, where $j = \left(N-1\right)/2$ and $N \geq 2$. Specifically, our protocol deterministically entangles spatially localized modes that are not only distinguishable but are also individually accessible and amenable to state preparation and measurement, and therefore, we envisage that this entangling mechanism could be utilized for deterministic quantum information processing with light.

quant-ph↗

arXiv2023

A chip-scale atomic beam clock

Atomic beams are a longstanding technology for atom-based sensors and clocks with widespread use in commercial frequency standards. Here, we report the demonstration a chip-scale microwave atomic beam clock using coherent population trapping (CPT) interrogation in a passively pumped atomic beam device. The beam device consists of a hermetically sealed vacuum cell fabricated from an anodically bonded stack of glass and Si wafers. Atomic beams are created using a lithographically defined microcapillary array connected to a Rb reservoir1 and propagate in a 15 mm long drift cavity. We present a detailed characterization of the atomic beam performance (total Rb flux $\approx 7.7 \times 10^{11} s^{-1}$ at 363 K device temperature) and of the vacuum environment in the device (pressure < 1 Pa), which is sustained using getter materials which pump residual gases and Rb vapor. A chip-scale beam clock is realized using Ramsey CPT spectroscopy of the 87Rb ground state hyperfine transition over a 10 mm Ramsey distance in the atomic beam device. The prototype atomic beam clock demonstrates a fractional frequency stability of $\approx 1.2 \times 10^{-9}/\sqrt{\tau}$ for integration times $\tau$ from 1 s to 250 s, limited by detection noise. Optimized atomic beam clocks based on this approach may exceed the long-term stability of existing chip-scale clocks, and leading long-term systematics are predicted to limit the ultimate fractional frequency stability below $10^{-12}$.

physics.atom-ph↗

arXiv2022

Bottom-up approach to room temperature quantum systems

We demonstrate a key ingredient in a 'bottom-up' approach to building complex quantum matter using thermal atomic vapors. We have isolated and tracked very slowly moving individual atoms without the aid of laser cooling. Passive filtering enabled us to carefully select atoms whose three-dimensional velocity vector has a magnitude below $\bar{v}/20$, where $\bar{v}$ is the mean velocity of the ensemble. Using a novel photon correlation technique, we could follow the three-dimensional trajectory of single, slowly moving atoms for $> 1μ$s within a $25μ$m field of view, with no obvious limit to the tracking ability while simultaneously observing Rabi oscillations of these single emitters. Our results demonstrate the power and scalability of thermal ensembles for utilization in quantum memories, imaging, and other quantum information applications through bottom-up approaches.

quant-ph↗

arXiv2022

Stimulated Laser Cooling Using Microfabrication

We have achieved stimulated laser cooling of thermal rubidium atomic beams on a silicon chip. Following pre-collimation via a silicon microchannel array, we perform beam brightening via a blue-detuned optical molasses. Owing to the small size of the chip elements, we require only 8 mW, or nine times lower power than earlier free-space experiments on cesium [Aspect et al., Phys. Rev. Lett. 57, 1688 (1986)]. Silicon micromirrors are fabricated and hand-assembled to precisely overlap a strong elliptical standing wave with a sheet-shaped atomic density distribution, with dimensions chosen precisely to match these. We reduce the transverse velocity spread to below 1 m/s within a total travel distance of 4.5 mm on a silicon substrate. We use Doppler-sensitive two-photon Raman spectroscopy to characterize the cooling. In contrast to time-of-flight methods utilized previously, this approach requires a much shorter apparatus to achieve similar resolution. This hybrid of passive and active collimation paves the way toward the construction of full-fledged atomic instruments, such as atomic beam clocks and gyroscopes, entirely on-chip through batch-fabricated processes.

physics.atom-ph↗

arXiv2022

Collimated versatile atomic beam source with alkali dispensers

Alkali metal dispensers have become an indispensable tool in the production of atomic vapors for magnetometry, alkali vapor cell clocks, and laser cooling experiments. A primary advantage of these dispensers is that they contain alkali metal in an inert form that can be exposed to air without hazard. However, their high temperature of operation (>600 C) is undesirable for many applications, as it shifts the atomic speed distribution to higher values and presents a radiative heat source that can raise the temperature of its surroundings. For this reason, dispensers are typically not used in line-of-sight applications such as atomic beam generation. In this work, we present an integrated rubidium dispenser collimating device with a thickness of only 2 mm that produces a beam of atoms traveling primarily in the forward direction. We find that the collimator plate serves to both shield the dispenser's radiation as well as to moderate the velocity of the atomic beam so that the measured longitudinal speed distribution is comparable to that of an ordinary alkali oven at only a slightly elevated temperature of 200 C. To confirm our theory, we also constructed another compact apparatus consisting of a dispenser and a silicon collimator and the measurements support our conclusion. Our integrated dispenser collimator will particularly be useful in integrated photonics and cavity QED on chip, where a localized, directed source of Rb vapor in small quantities is needed.

physics.atom-ph↗

arXiv2020

Magnetic solitons in an immiscible two-component Bose-Einstein condensate

We investigate magnetic solitons in an immiscible binary Bose-Einstein condensate (BEC), where the intraspecies interactions are slightly weaker than the interspecies interactions. While their density and phase profiles are analogous to dark-bright solitons, other characteristic properties such as velocities, widths, total density depletions, and in-trap oscillations are different. In the low velocity regime, a magnetic soliton reduces to a traveling pair of magnetic domain walls. Collisional behaviors of the solitons are also briefly discussed. We further demonstrate that these solitonic states can be realized in a quasi-one-dimensional (quasi-1D) spin-1 ferromagnetic BEC with weak spin interaction, e.g., a Rb87 BEC.

cond-mat.quant-gas↗

arXiv2020

Magnetic soliton: from two to three components with SO(3) symmetry

Recent theoretical and experimental research has explored magnetic solitons in binary Bose-Einstein condensates (BECs). Here we demonstrate that such solitons are part of an SO(3) soliton family when embedded within a full three-component spin-1 manifold with spin-rotational symmetry. To showcase this, we have experimentally created a new type of domain wall magnetic soliton (DWMS) obtained by 90 degree rotations, which consist of a boundary between easy-axis and easy-plane polar phases. Collisions between SO(3) solitons are investigated by numerically solving the Gross-Pitaevskii equations, which exhibit novel properties including rotation and dissipation of soliton spin polarization.

cond-mat.quant-gas↗

arXiv2020

High Quality factor micro-ring resonator for strong atom-light interactions using miniature atomic beams

An integrated photonic platform is proposed for strong interactions between atomic beams and annealing-free high-quality-factor (Q) microresonators. We fabricated a thin-film, air-clad SiN microresonator with a loaded Q of $1.55\times10^6$ around the optical transition of $^{87}$Rb at $~780$ nm. This Q is achieved without annealing the devices at high temperatures, enabling future fully integrated platforms containing optoelectronic circuitry as well. The estimated single-photon Rabi frequency (2g) is ${2\boldsymbolπ}\times$64 MHz at a height of 100 nm above the resonator. Our simulation result indicates that miniature atomic beams with a longitudinal speed of 0.2 m/s to 30 m/s will strongly interact with our resonator, allowing for the detection of single-atom transits and the realization of scalable single-atom photonic devices. Racetrack resonators with a similar Q can be used to detect thermal atomic beams with velocities around 300 m/s.

physics.optics↗

arXiv2020

Nematic-orbit coupling and nematic density waves in spin-1 condensates

We propose the creation of artificial nematic-orbit coupling in spin-1 Bose-Einstein condensates, in analogy to spin-orbit coupling. Using a suitably designed microwave chip, the quadratic Zeeman shift, normally uniform in space, can be made to be spatio-temporally varying, leading to a coupling between spatial and nematic degrees of freedom. A phase diagram is explored where three quantum phases with the nematic order emerge: easy-axis, easy-plane with single-well and easy-plane with double well structure in momentum space. By including spin-dependent and spin-independent interactions, we also obtain the low energy excitation spectra in these three phases. Lastly, we show that the nematic-orbit coupling leads to a periodic nematic density modulation in relation to the period $λ_T$ of the cosinusoidal quadratic Zeeman term. Our results point to the rich possibilities for manipulation of tensorial degrees of freedom in ultracold gases without requiring Raman lasers, and therefore, obviating light-scattering induced heating.

cond-mat.quant-gas↗

arXiv2019

Magnetic solitons in a spin-1 Bose-Einstein condensate

Vector solitons are a type of solitary, or non-spreading wavepacket occurring in a nonlinear medium comprised of multiple components. As such, a variety of synthetic systems can be constructed to explore their properties, from nonlinear optics to ultracold atoms, and even in human-scale metamaterials. In quantum systems such as photons or Bose-Einstein condensates (BECs), such vector nonlinearities offer a window into complex many-body dynamics, and offer possibilities for quantum communication and information processing. BECs have a rich panoply of internal hyperfine levels, or spin components, which make them a unique platform for exploring these solitary waves. However, existing experimental work has focused largely on binary systems confined to the Manakov limit of the nonlinear equations governing the soliton behavior, where quantum magnetism plays no role. Here we observe, using a ``magnetic shadowing'' technique, a new type of soliton in a spinor BEC, one that exists only when the underlying interactions are antiferromagnetic, and which is deeply embedded within a full spin-1 quantum system. Our approach opens up a vista for future studies of ``solitonic matter'' whereby multiple solitons interact with one another at deterministic locations, and eventually to the realization of quantum correlated states of solitons, a longstanding and unrealized goal.

cond-mat.quant-gas↗

arXiv2010

Light-Induced Atomic Desorption for loading a Sodium Magneto-Optical Trap

We report studies of photon-stimulated desorption (PSD), also known as light-induced atomic desorption(LIAD), of sodium atoms from a vacuum cell glass surface used for loading a magneto-optical trap (MOT). Fluorescence detection was used to record the trapped atom number and the desorption rate. We observed a steep wavelength dependence of the desorption process above 2.6 eV photon energy, a result significant for estimations of sodium vapor density in the lunar atmosphere. Our data fit well to a simple model for the loading of the MOT dependent only on the sodium desorption rate and residual gas density. Up to 3.7x10^7 Na atoms were confined under ultra-high vacuum conditions, creating promising loading conditions for a vapor cell based atomic Bose-Einstein condensate of sodium.

physics.atom-ph↗

arXiv2000

Collective enhancement and suppression in Bose-Einstein condensates

The coherent and collective nature of Bose-Einstein condensate can enhance or suppress physical processes. Bosonic stimulation enhances scattering in already occupied states which leads to atom amplification, and the suppression of dissipation leads to superfluidity. In this paper, we review several experiments where suppression and enhancement have been observed and discuss the common roots of and differences between these phenomena.

cond-mat.soft↗