arXiv subjects

Chandra Shekhar

Publications and source records attributed to Chandra Shekhar.

At least 37 records · Page 2Linked to original sources

arXiv2025

Spin-forbidden excitations in the magneto-optical spectra of CrI$_3$ tuned by covalency

Spin-forbidden ($ΔS \neq 0$) multiplet excitations and their coupling to magnetic properties are of increasing importance for magneto-optical studies of correlated materials. Nonetheless, the mechanisms for optically brightening these transitions and their generality remain poorly understood. Here, we report magnetic circular dichroism (MCD) spectroscopy on the van der Waals (vdW) ferromagnet (FM) CrI$_3$. Previously unreported spin-forbidden ($ΔS = 1$) ${}^4A_{2\mathrm{g}} \to{}^2E_\mathrm{g}/{}^2T_{1\mathrm{g}}$ Cr${}^{3+}$ $dd$ excitations are observed near the ligand-to-metal charge transfer (LMCT) excitation threshold. The assignment of these excitations and their Cr$^{3+}$ multiplet character is established through complementary Cr $L_3$-edge resonant inelastic X-ray scattering (RIXS) measurements along with charge transfer multiplet (CTM) calculations and chemical trends in the chromium trihalide series (CrX$_3$, X = Cl, Br, I). We utilize the high sensitivity of MCD spectroscopy to study the thickness dependent optical response. The spin-forbidden excitations remain robust down to the monolayer limit and exhibit a significant magnetic field tunability across the antiferromagnetic to FM transition in few-layer samples. This behavior is associated to changes in the metal-ligand covalency with magnetic state, as supported by our CTM analysis. Our results clarify the magneto-optical response of CrI$_3$ and identify covalency as a central mechanism for the brightening and field-tunability of spin-forbidden multiplet excitations.

cond-mat.str-el↗

arXiv2024

Evidence for reduced periodic lattice distortion within the Sb-terminated surface layer of the kagome metal CsV$_3$Sb$_5$

The discovery of the kagome metal CsV$_3$Sb$_5$ sparked broad interest, due to the coexistence of a charge density wave (CDW) phase and possible unconventional superconductivity in the material. In this study, we use low-energy electron diffraction (LEED) with a $μ$m-sized electron beam to explore the periodic lattice distortion at the antimony-terminated surface in the CDW phase. We recorded high-quality backscattering diffraction patterns in ultrahigh vacuum from multiple cleaved samples. Unexpectedly, we did not find superstructure reflexes at intensity levels predicted from dynamical LEED calculations for the reported $2 \times 2 \times 2$ bulk structure. Our results suggest that in CsV$_3$Sb$_5$ the periodic lattice distortion accompanying the CDW is less pronounced at Sb-terminated surfaces than in the bulk.

cond-mat.str-el↗

arXiv2024

Pressure-induced superconductivity in monoclinic RhBi$_2$

RhBi$_2$ is a polymorphic system that exhibits two distinct phases. RhBi$_2$ in the triclinic phase has been identified as a weak topological insulator with a van Hove singularity point close to the Fermi energy. Thus, triclinic RhBi$_2$ is expected to exhibit exotic quantum properties under strain or pressure. In this study, we report on the emergence of superconductivity in the monoclinic RhBi$_2$ under external pressures. The electrical resistivity behavior of the monoclinic RhBi$_2$ single crystal is studied at a wide range of applied external pressures up to 40 GPa. We observe a pressure-induced superconductivity with a dome-shaped dependence of the critical temperature on pressure at pressures above 10 GPa. A maximum critical temperature ($T_\mathrm{c}$) value of $T_\mathrm{c}$ = 5.1 K is reached at the pressure of 16.1 GPa. Furthermore, we performed detailed ab initio calculations to understand the electronic band structures of monoclinic RhBi$_2$ under varying pressures. The combination of topology and pressure-induced superconductivity in the RhBi$_2$ polymorphic system may provide us with a new promising material platform to investigate topological superconductivity.

cond-mat.supr-con↗

arXiv2024

2024 roadmap on 2D topological insulators

2D topological insulators promise novel approaches towards electronic, spintronic, and quantum device applications. This is owing to unique features of their electronic band structure, in which bulk-boundary correspondences enforces the existence of 1D spin-momentum locked metallic edge states - both helical and chiral - surrounding an electrically insulating bulk. Forty years since the first discoveries of topological phases in condensed matter, the abstract concept of band topology has sprung into realization with several materials now available in which sizable bulk energy gaps - up to a few hundred meV - promise to enable topology for applications even at room-temperature. Further, the possibility of combining 2D TIs in heterostructures with functional materials such as multiferroics, ferromagnets, and superconductors, vastly extends the range of applicability beyond their intrinsic properties. While 2D TIs remain a unique testbed for questions of fundamental condensed matter physics, proposals seek to control the topologically protected bulk or boundary states electrically, or even induce topological phase transitions to engender switching functionality. Induction of superconducting pairing in 2D TIs strives to realize non-Abelian quasiparticles, promising avenues towards fault-tolerant topological quantum computing. This roadmap aims to present a status update of the field, reviewing recent advances and remaining challenges in theoretical understanding, materials synthesis, physical characterization and, ultimately, device perspectives.

cond-mat.mes-hall↗

arXiv2024

Revealing the hidden Dirac gap in a topological antiferromagnet using Floquet-Bloch manipulation

Manipulating solids using the time-periodic drive of a laser pulse is a promising route to generate new phases of matter. Whether such `Floquet-Bloch' manipulation can be achieved in topological magnetic systems with disorder has so far been unclear. In this work, we realize Floquet-Bloch manipulation of the Dirac surface-state mass of the topological antiferromagnet (AFM) MnBi$_2$Te$_4$. Using time- and angle-resolved photoemission spectroscopy (tr-ARPES), we show that opposite helicities of mid-infrared circularly polarized light result in substantially different Dirac mass gaps in the AFM phase, despite the equilibrium Dirac cone being massless. We explain our findings in terms of a Dirac fermion with a random mass. Our results underscore Floquet-Bloch manipulation as a powerful tool for controlling topology even in the presence of disorder, and for uncovering properties of materials that may elude conventional probes.

cond-mat.mes-hall↗

arXiv2024

Orbital selective commensurate modulations of the local density of states in ScV6Sn6 probed by nuclear spins

The Kagome network is a unique platform in solid state physics that harbors a diversity of special electronic states due to its inherent band structure features comprising Dirac cones, van-Hove singularities, and flat bands. Some Kagome-based non-magnetic metals have recently been found to exhibit favorable properties, including unconventional superconductivity, charge density waves (CDW), switchable chiral transport, and signatures of an anomalous Hall effect (AHE). The Kagome metal ScV6Sn6 is another promising candidate for studying the emergence of an unconventional CDW and accompanying effects. We use 51V nuclear magnetic resonance (NMR) to study the local properties of the CDW phase in single crystalline ScV6Sn6, aided by density functional theory (DFT). We trace the dynamics of the local magnetic field during the CDW phase transition and determine a loss in the density of states (DOS) by a factor of $\sqrt{2}$, in excellent agreement with DFT. The local charge symmetry of the V surrounding in the CDW phase reflects the commensurate modulation of the charge density with wave vector q=(1/3,1/3,1/3). An unusual orientation dependent change in the NMR shift splitting symmetry, however, reveals orbital selective modulations of the local DOS.

cond-mat.mtrl-sci↗

arXiv2024

Tuning charge density wave of kagome metal ScV6Sn6

Compounds with a kagome lattice exhibit intriguing properties and the charge density wave (CDW) adds an additional layer of interest to research on them. In this study, we investigate the temperature and magnetic field dependent electrical properties under a chemical substitution and hydrostatic pressure of ScV6Sn6, a non-magnetic charge density wave (CDW) compound. Substituting 5 % Cr at the V site or applying 1.5 GPa of pressure shifts the CDW to 50 K from 92 K. This shift is attributed to the movement of the imaginary phonon band, as revealed by the phonon dispersion relation. The longitudinal and Hall resistivities respond differently under these stimuli. The magnetoresistance (MR) maintains its quasilinear behavior under pressure, but it becomes quadratic after Cr substitution. The anomalous Hall-like behavior of the parent compound persists up to the respective CDW transition under pressure, after which it sharply declines. In contrast, the longitudinal and Hall resistivities of Cr substituted compounds follow a two-band model and originates from the multi carrier effect. These results clearly highlight the role of phonon contributions in the CDW transition and call for further investigation into the origin of the anomalous Hall-like behavior in the parent compound.

cond-mat.mtrl-sci↗

arXiv2024

Discovery of a Topological Charge Density Wave

Charge density waves (CDWs) appear in numerous condensed matter platforms, ranging from high-Tc superconductors to quantum Hall systems. Despite such ubiquity, there has been a lack of direct experimental study on boundary states that can uniquely stem from the charge order. Here, using scanning tunneling microscopy, we directly visualize the bulk and boundary phenomenology of CDW in a topological material, Ta2Se8I. Below the transition temperature (TCDW = 260 K), tunneling spectra on an atomically resolved lattice reveal a large insulating gap in the bulk and on the surface, exceeding 500 meV, surpassing predictions from standard weakly-coupled mean-field theory. Spectroscopic imaging confirms the presence of CDW, with LDOS maxima at the conduction band corresponding to the LDOS minima at the valence band, thus revealing a π phase difference in the respective CDW order. Concomitantly, at a monolayer step edge, we detect an in-gap boundary mode with modulations along the edge that match the CDW wavevector along the edge. Intriguingly, the phase of the edge state modulation shifts by π within the charge order gap, connecting the fully gapped bulk (and surface) conduction and valence bands via a smooth energy-phase relation. This bears similarity to the topological spectral flow of edge modes, where the boundary modes bridge the gapped bulk modes in energy and momentum magnitude but in Ta2Se8I, the connectivity distinctly occurs in energy and momentum phase. Notably, our temperature-dependent measurements indicate a vanishing of the insulating gap and the in-gap edge state above TCDW, suggesting their direct relation to CDW. The theoretical analysis also indicates that the observed boundary mode is topological and linked to CDW.

cond-mat.str-el↗

arXiv2024

Quantum oscillations revealing topological band in kagome metal ScV6Sn6

Compounds with kagome lattice structure are known to exhibit Dirac cones, flat bands, and van Hove singularities, which host numerous versatile quantum phenomena. Inspired by these intriguing properties, we investigate the temperature and magnetic field dependent electrical transports along with the theoretical calculations of ScV6Sn6, a nonmagnetic charge density wave (CDW) compound. At low temperatures, the compound exhibits Shubnikov-de Haas quantum oscillations, which help to design the Fermi surface (FS) topology. This analysis reveals the existence of several small FSs in the Brillouin zone, combined with a large FS. Among them, the FS possessing Dirac band is a non-trivial and generates a non-zero Berry phase. In addition, the compound also shows the anomalous Hall-like behaviour up to the CDW with the CDW phase, ScV6Sn6 presents a unique material example of the versatile HfFe6Ge6 family and provides various promising opportunities to explore the series further.

cond-mat.mtrl-sci↗

arXiv2023

Controllable orbital angular momentum monopoles in chiral topological semimetals

The emerging field of orbitronics aims at generating and controlling currents of electronic orbital angular momentum (OAM) for information processing. Structurally chiral topological crystals could be particularly suitable orbitronic materials because they have been predicted to host topological band degeneracies in reciprocal space that are monopoles of OAM. Around such a monopole, the OAM is locked isotopically parallel or antiparallel to the direction of the electron's momentum, which could be used to generate large and controllable OAM currents. However, OAM monopoles have not yet been directly observed in chiral crystals, and no handle to control their polarity has been discovered. Here, we use circular dichroism in angle-resolved photoelectron spectroscopy (CD-ARPES) to image OAM monopoles in the chiral topological semimetals PtGa and PdGa. Moreover, we also demonstrate that the polarity of the monopole can be controlled via the structural handedness of the host crystal by imaging OAM monopoles and anti-monopoles in the two enantiomers of PdGa, respectively. For most photon energies used in our study, we observe a sign change in the CD-ARPES spectrum when comparing positive and negative momenta along the light direction near the topological degeneracy. This is consistent with the conventional view that CD-ARPES measures the projection of the OAM monopole along the photon momentum. For some photon energies, however, this sign change disappears, which can be understood from our numerical simulations as the interference of polar atomic OAM contributions, consistent with the presence of OAM monopoles. Our results highlight the potential of chiral crystals for orbitronic device applications, and our methodology could enable the discovery of even more complicated nodal OAM textures that could be exploited for orbitronics.

cond-mat.str-el↗

arXiv2023

Real Time Vehicle Identification: A Synchronous-Transmission Based Approach

Identification of the vehicles passing over the roads is a very important component of traffic monitoring/surveillance. There have been many attempts to design and develop efficient strategies to carry out the job. However, from the point of view of practical usefulness and real-time operation, most of them do not score well. In the current work, we perceive the problem as efficient real-time communication and data-sharing between the units in charge of recording the identities of the vehicles, i.e., Vehicle Recorders (VR), and the Vehicles (VE). We propose a strategy to address the issue with the help of Synchronous-Transmission (ST), which is a newer paradigm of communication compared to the traditional paradigm based on Asynchronous-Transmission (AT). First, we theoretically show that the presence of the physical layer phenomena called Capture-Effect in ST brings a significant benefit. Next, we also implement the strategy in a well-known IoT-Operating System Contiki, and compare its performance with the existing best-known strategy.

cs.NI↗

arXiv2023

Visualizing near-coexistence of massless Dirac electrons and ultra-massive saddle point electrons

Strong singularities in the electronic density of states amplify correlation effects and play a key role in determining the ordering instabilities in various materials. Recently high order van Hove singularities (VHSs) with diverging power-law scaling have been classified in single-band electron models. We show that the 110 surface of Bismuth exhibits high order VHS with an usually high density of states divergence $\sim (E)^{-0.7}$. Detailed mapping of the surface band structure using scanning tunneling microscopy and spectroscopy combined with first-principles calculations show that this singularity occurs in close proximity to Dirac bands located at the center of the surface Brillouin zone. The enhanced power-law divergence is shown to originate from the anisotropic flattening of the Dirac band just above the Dirac node. Such near-coexistence of massless Dirac electrons and ultra-massive saddle points enables to study the interplay of high order VHS and Dirac fermions.

cond-mat.mes-hall↗

arXiv2023

Vortex phase diagram of kagome superconductor CsV$_3$Sb$_5$

The screening response of vortices in kagome superconductor CsV$_3$Sb$_5$ was measured using the ac mutual inductance technique. Besides confirming the absence of gapless quasiparticles in zero external magnetic field, we observe the peak effect, manifested in enhanced vortex pinning strength and critical current, in a broad intermediate range of magnetic field. The peaks are followed by another crossover from strong to weak pinning, unlike the usual peak effect that diminishes smoothly at $H_{c2}$. Hysteresis in the screening response allows the identification of a vortex glass phase which strongly correlates with the onset of the peaks. A variety of features in the temperature- and field-dependence of the screening response, corroborated by resistance and dc magnetization measurements, have allowed us to extract an $H$-$T$ phase diagram of the vortex states and to infer the irreversibility line $H_\text{irr}(T)$.

cond-mat.supr-con↗

arXiv2023

High Resolution Polar Kerr Effect Studies of CsV${}_3$Sb${}_5$: Tests for Time Reversal Symmetry Breaking Below the Charge Order Transition

We report high resolution polar Kerr effect measurements on CsV${}_3$Sb${}_5$ single crystals in search for signatures of spontaneous time reversal symmetry breaking below the charge order transition at $T^* \approx 94$ K. Utilizing two different versions of zero-area loop Sagnac interferometers operating at 1550 nm wavelength, each with the fundamental attribute that without a time reversal symmetry breaking sample at its path, the interferometer is perfectly reciprocal, we find no observable Kerr effect to within the noise floor limit of the apparatus at 30 nanoradians. Simultaneous coherent reflection ratio measurements confirm the sharpness of the charge order transition in the same optical volume as the Kerr measurements. At finite magnetic field we observe a sharp onset of a diamagnetic shift in the Kerr signal at $T^*$, which persists down to the lowest temperature without change in trend. Since 1550 nm is an energy that was shown to capture all features of the optical properties of the material that interact with the charge order transition, we are led to conclude that it is highly unlikely that time reversal symmetry is broken in the charge ordered state in CsV${}_3$Sb${}_5$.

cond-mat.str-el↗

arXiv2023

Reply to: Low-frequency quantum oscillations in LaRhIn$_5$: Dirac point or nodal line?

We thank G.P. Mikitik and Yu.V. Sharlai for contributing this note and the cordial exchange about it. First and foremost, we note that the aim of our paper is to report a methodology to diagnose topological (semi)metals using magnetic quantum oscillations. Thus far, such diagnosis has been based on the phase offset of quantum oscillations, which is extracted from a "Landau fan plot". A thorough analysis of the Onsager-Lifshitz-Roth quantization rules has shown that the famous $π$-phase shift can equally well arise from orbital- or spin magnetic moments in topologically trivial systems with strong spin-orbit coupling or small effective masses. Therefore, the "Landau fan plot" does not by itself constitute a proof of a topologically nontrivial Fermi surface. In the paper at hand, we report an improved analysis method that exploits the strong energy-dependence of the effective mass in linearly dispersing bands. This leads to a characteristic temperature dependence of the oscillation frequency which is a strong indicator of nontrivial topology, even for multi-band metals with complex Fermi surfaces. Three materials, Cd$_3$As$_2$, Bi$_2$O$_2$Se and LaRhIn$_5$ served as test cases for this method. Linear band dispersions were detected for Cd$_3$As$_2$, as well as the $F$ $\approx$ 7 T pocket in LaRhIn$_5$.

cond-mat.str-el↗

arXiv2023

Removal of industrial dye and pharmaceutical product using the nano and micron-sized PS rough particles studded with Pt nanoparticles

We show that the rough particles studded with platinum nanoparticles can be fabricated straightforwardly and in a single step at room temperature. These rough particles displayed a good catalytic power (100% removal efficiency) against a model industrial dye (methylene blue) and pharmaceutical residue (tetracycline) within a reasonable time scale. Further, we illustrate the effects of particle size, concentration, and contact patterns on the performance of rough catalytic particles. The semi-batch conditions favoured the complete decomposition of tetracycline within 40 min, but the batch-wise operation offered a good contacting pattern for methylene blue yielding a maximal output within 10 min. The kinetics of the heterogeneous catalytic process modelled by Langmuir-Hinshelwood kinetics predicts that the given methylene blue decomposition reaction induced by the rough particles follows the pseudo-first-order kinetics. The rate constants for the reaction catalyzed by 0.6 and 1.0um-sized rough particles are 0.048 and 0.032 min^-1, respectively. Furthermore, we established the proof-of-concept using magnetically-responsive rough particles for real-time applications, including decontamination and recovery of catalyst particles via an externally applied magnetic field in one cycle. Our proposed method helps achieve a near-100% degrading efficiency within 10 to 40 min at minimal catalytic particle concentration, i.e., 200 ppm. Since we can turn the rough particles into super-paramagnetic, we can recover and reuse them for several wastewater treatment cycles without incurring any running costs.

physics.chem-ph↗

arXiv2022

Observation of an unexpected negative magnetoresistance in magnetic Weyl semimetal Co$_3$Sn$_2$S$_2$

Time-reversal symmetry breaking allows for a rich set of magneto-transport properties related to electronic topology. Focusing on the magnetic Weyl semimetal Co$_3$Sn$_2$S$_2$, we prepared micro-ribbons and investigated their transverse and longitudinal transport properties from 100 K to 180 K in magnetic fields $μ_0 H$ up to 2T. We establish the presence of a magnetoresistance (MR) up to 1 % with a strong anisotropy depending the projection of $H$ on the easy-axis magnetization, which exceeds all other magnetoresistive effects. Based on detailed phenomenological modeling, we attribute the observed results with unexpected form of anisotropy to magnon MR resulting from magnon-electron coupling. Moreover, a similar angular dependence is also found in the transverse resistivity which we show to originate from the combination of ordinary Hall and anomalous Hall effects. Thus the interplay of magnetic and topological properties governs the magnetotransport features of this magnetic Weyl system.

cond-mat.mes-hall↗

arXiv2022

Data Converter Design Space Exploration for IoT Applications: An Overview of Challenges and Future Directions

Human lives are improving with the widespread use of cutting-edge digital technology like the Internet of Things (IoT). Recently, the pandemic has shown the demand for more digitally advanced IoT-based devices. International Data Corporation (IDC) forecasts that by 2025, there will be approximately 42 billion of these devices in use, capable of producing around 80 ZB (zettabytes) of data. So data acquisition, processing, communication, and visualization are necessary from a functional standpoint. Indicating sensors & data converters are the key components for IoT-based applications. The efficiency of such applications is truly measured in terms of latency, power, and resolution of data converters motivating designers to perform efficiently. Sensors capture and covert physical features from their chosen environment into detectable quantities. Data converter gives meaningful information and connects the real analog world to the digital component of the devices. The received data is interpreted and analyzed with the digital processing circuitry. Ultimately, it is used as information by a network of internet-connected smart devices. Because IoT technologies are adaptable to nearly any technology that may provide its operational activity and environmental conditions. But the challenges occur with power consumption as the complete IoT framework is battery operated and replacing a battery is a daunting task. So the goal of this chapter is to unveil the requirements to design energy-efficient data converters for IoT applications.

eess.SP↗