Searcharxiv⌕ Search

arXiv subjects

Changsheng You

Publications and source records attributed to Changsheng You.

At least 91 records · Page 5Linked to original sources
arXiv2023

Semantic-Relay-Aided Text Transmission: Placement Optimization and Bandwidth Allocation

Semantic communication has emerged as a promising technology to break the Shannon limit by extracting the meaning of source data and sending relevant semantic information only. However, some mobile devices may have limited computation and storage resources, which renders it difficult to deploy and implement the resource-demanding deep learning based semantic encoder/decoder. To tackle this challenge, we propose in this paper a new semantic relay (SemRelay), which is equipped with a semantic receiver for assisting text transmission from a resource-abundant base station (BS) to a resource-constrained mobile device. Specifically, the SemRelay first decodes the semantic information sent by the BS (with a semantic transmitter) and then forwards it to the user by adopting conventional bit transmission, hence effectively improving the text transmission efficiency. We formulate an optimization problem to maximize the achievable (effective) bit rate by jointly designing the SemRelay placement and bandwidth allocation. Although this problem is non-convex and generally difficult to solve, we propose an efficient penalty-based algorithm to obtain a high-quality suboptimal solution. Numerical results show the close-to-optimal performance of the proposed algorithm as well as significant rate performance gain of the proposed SemRelay over conventional decode-and-forward relay.

cs.IT↗
arXiv2023

Multiuser Resource Allocation for Semantic-Relay-Aided Text Transmissions

Semantic communication (SemCom) is an emerging technology that extracts useful meaning from data and sends only relevant semantic information. Thus, it has the great potential to improve the spectrum efficiency of conventional wireless systems with bit transmissions, especially in low signal-to-noise ratio (SNR) and small bandwidth regions. However, the existing works have mostly overlooked the constraints of mobile devices, which may not have sufficient capabilities to implement resource-demanding semantic encoder/decoder based on deep learning. To address this issue, we propose in this paper a new semantic relay (SemRelay), which is equipped with a semantic receiver to assist multiuser text transmissions. Specifically, the SemRelay decodes semantic information from a base station and forwards it to the users using conventional bit transmission, hence effectively improving text transmission efficiency. To study the multiuser resource allocation, we formulate an optimization problem to maximize the multiuser weighted sum-rate by jointly designing the SemRelay transmit power allocation and system bandwidth allocation. Although this problem is non-convex and hence challenging to solve, we propose an efficient algorithm to obtain its high-quality suboptimal solution by using the block coordinate descent method. Last, numerical results show the effectiveness of the proposed algorithm as well as superior performance of the proposed SemRelay over the conventional decode-and-forward (DF) relay, especially in small bandwidth region.

eess.SP↗
arXiv2023

Resource Allocation for RIS-Empowered Wireless Communications: Low-Complexity and Robust Designs

This article delves into advancements in resource allocation techniques tailored for systems utilizing reconfigurable intelligent surfaces (RIS), with a primary focus on achieving low-complexity and resilient solutions. The investigation of low-complexity approaches for RIS holds significant relevance, primarily owing to the intricate characteristics inherent in RIS-based systems and the need of deploying large-scale RIS arrays. Concurrently, the exploration of robust solutions aims to address the issue of hardware impairments occurring at both the transceivers and RIS components in practical RIS-assisted systems. In the realm of both low-complexity and robust resource allocation, this article not only elucidates the fundamental techniques underpinning these methodologies but also offers comprehensive numerical results for illustrative purposes. The necessity of adopting resource allocation strategies that are both low in complexity and resilient is thoroughly established. Ultimately, this article provides prospective research avenues in the domain of low-complexity and robust resource allocation techniques tailored for RIS-assisted systems.

cs.IT↗
arXiv2023

SWIPT in Mixed Near- and Far-Field Channels: Joint Beam Scheduling and Power Allocation

Extremely large-scale array (XL-array) has emerged as a promising technology to enhance the spectrum efficiency and spatial resolution in future wireless networks by exploiting massive number of antennas for generating pencil-like beamforming. This also leads to a fundamental paradigm shift from conventional far-field communications towards the new near-field communications. In contrast to the existing works that mostly considered simultaneous wireless information and power transfer (SWIPT) in the far field, we consider in this paper a new and practical scenario, called mixed near- and far-field SWIPT, where energy harvesting (EH) and information decoding (ID) receivers are located in the near- and far-field regions of the XL-array base station (BS), respectively. Specifically, we formulate an optimization problem to maximize the weighted sum-power harvested at all EH receivers by jointly designing the BS beam scheduling and power allocation, under the constraints on the maximum sum-rate and BS transmit power. First, for the general case with multiple EH and ID receivers, we propose an efficient algorithm to obtain a suboptimal solution by utilizing the binary variable elimination and successive convex approximation methods. To obtain useful insights, we then study the joint design for special cases. In particular, we show that when there are multiple EH receivers and one ID receiver, in most cases, the optimal design is allocating a portion of power to the ID receiver for satisfying the rate constraint, while the remaining power is allocated to one EH receiver with the highest EH capability. This is in sharp contrast to the conventional far-field SWIPT case, for which all powers should be allocated to ID receivers. Numerical results show that our proposed joint design significantly outperforms other benchmark schemes without the optimization of beam scheduling and/or power allocation.

eess.SP↗
arXiv2023

Base Station Beamforming Design for Near-field XL-IRS Beam Training

Existing research on extremely large-scale intelligent reflecting surface (XL-IRS) beam training has assumed the far-field channel model for base station (BS)-IRS link. However, this approach may cause degraded beam training performance in practice due to the near-field channel model of the BS-IRS link. To address this issue, we propose two efficient schemes to optimize BS beamforming for improving the XL-IRS beam training performance. Specifically, the first scheme aims to maximize total received signal power on the XL-IRS, which generalizes the existing angle based BS beamforming design and can be resolved using the singular value decomposition (SVD) method. The second scheme aims to maximize the $\ell_1$-norm of incident signals on the XL-IRS, which is shown to achieve the maximum received power at the user. To solve the non-convex $\ell_1$-norm maximization problem, we propose an eficient algorithm by using the alternating optimization (AO) technique. Numerical results show that the proposed AO based BS beamforming design outperforms the SVD/angle based BS beamforming in terms of training accuracy and achievable received signal-to-noise ratio (SNR).

eess.SP↗
arXiv2023

Channel Estimation By Transmitting Pilots From Reconfigurable Intelligent Surface

Reconfigurable intelligent surface (RIS) is a promising technology for future wireless communication systems. Channel estimation (CE) of RIS device is a critical but also challenging issue for its development. The mainstream of existing CE methods is confined to the so-called cascaded channel (CscdChn) estimation scheme, which treats the multiplicative two-hop RIS channels as an effective one and measures it as a whole. This CscdChn training method suffers from severe double-fading attenuation loss, which significantly degrades the CE accuracy. In this paper, we propose a novel RIS-transmitting (RIS-TX) based CE scheme, which has lower pilot overhead than CscdChn scheme and effectively overcomes the double-fading curse via incorporating only one single transmit radio frequency (RF)-chain into RIS. We develop highly efficient gradient descent (GD) and penalty duality decomposition (PDD)-based solutions to resolve the pilot design task for the RIS-TX CE scheme, which is a difficult quartic optimization problem. Our designed pilot signal outperforms the discrete Fourier transform (DFT) sequence, which is reported to be optimal for CscdChn scheme. Besides, both theoretical analysis and numerical results demonstrate that our proposed RIS-TX scheme exhibits distinct performance characteristics as opposed to its CscdChn counterpart and yields superior accuracy when RIS device is not extremely large.

cs.IT↗
arXiv2023

Double-Active-IRS Aided Wireless Communication: Deployment Optimization and Capacity Scaling

In this letter, we consider a double-active-intelligent reflecting surface (IRS) aided wireless communication system, where two active IRSs are properly deployed to assist the communication from a base station (BS) to multiple users located in a given zone via the double-reflection links. Under the assumption of fixed per-element amplification power for each active-IRS element, we formulate a rate maximization problem subject to practical constraints on the reflection design, elements allocation, and placement of active IRSs. To solve this non-convex problem, we first obtain the optimal active-IRS reflections and BS beamforming, based on which we then jointly optimize the active-IRS elements allocation and placement by using the alternating optimization (AO) method. Moreover, we show that given the fixed per-element amplification power, the received signal-to-noise ratio (SNR) at the user increases asymptotically with the square of the number of reflecting elements; while given the fixed number of reflecting elements, the SNR does not increase with the per-element amplification power when it is asymptotically large. Last, numerical results are presented to validate the effectiveness of the proposed AO-based algorithm and compare the rate performance of the considered double-active-IRS aided wireless system with various benchmark systems.

cs.IT↗
arXiv2023

Near-Field Beam Management for Extremely Large-Scale Array Communications

Extremely large-scale arrays (XL-arrays) have emerged as a promising technology to achieve super-high spectral efficiency and spatial resolution in future wireless systems. The large aperture of XL-arrays means that spherical rather than planar wavefronts must be considered, and a paradigm shift from far-field to near-field communications is necessary. Unlike existing works that have mainly considered far-field beam management, we study the new near-field beam management for XL-arrays. We first provide an overview of near-field communications and introduce various applications of XL-arrays in both outdoor and indoor scenarios. Then, three typical near-field beam management methods for XL-arrays are discussed: near-field beam training, beam tracking, and beam scheduling. We point out their main design issues and propose promising solutions to address them. Moreover, other important directions in near-field communications are also highlighted to motivate future research.

eess.SP↗
arXiv2023

Cramér-Rao Bounds of Near-Field Positioning Based on Electromagnetic Propagation Model

The adoption of large-scale antenna arrays at high-frequency bands is widely envisioned in the beyond 5G wireless networks. This leads to the near-field regime where the wavefront is no longer planar but spherical, bringing new opportunities and challenges for communications and positioning. In this paper, we improve the near-field positioning technology from the classical spherical wavefront model (SWM) to the more accurate and true electromagnetic propagation model (EPM). A generic near-field positioning model with different observation capabilities for three electric field types (vector, scalar, and overall scalar electric field) is developed based on the complete EPM. For these three observed electric field types, the Cramér-Rao bound (CRB) is adopted to evaluate the achievable estimation accuracy. The expressions of the CRBs for different electric field observations are derived by combining electromagnetic propagation concepts with estimation theory. Closed-form expressions can be further obtained as the terminal is assumed to be on the central perpendicular line (CPL) of the receiving antenna surface. Moreover, the above discussions are extended to the system with multiple receiving antennas. In this case, the CRBs using various electric field types are derived, and the effect of different numbers of receiving antennas is deeply investigated. Numerical results are provided to quantify the CRBs and validate the analytical results. Also, the impact of different system parameters, including electric field type, wavelength, size of the receiving antenna, and number of antennas, is evaluated.

eess.SP↗
arXiv2023

Active-IRS-Aided Wireless Communication: Fundamentals, Designs and Open Issues

Intelligent reflecting surface (IRS) has emerged as a promising technology to realize smart radio environment for future wireless communication systems. Existing works in this line of research have mainly considered the conventional passive IRS that reflects wireless signals without power amplification, while in this article, we give an overview of a new type of IRS, called active IRS, which enables simultaneous signal reflection and amplification, thus significantly extending the signal coverage of passive IRS. We first present the fundamentals of active IRS, including its hardware architecture, signal and channel models, as well as practical constraints, in comparison with those of passive IRS. Then, we discuss new considerations and open issues in designing active-IRS-aided wireless communications, such as the reflection optimization, channel estimation, and deployment for active IRS, as well as its integrated design with passive IRS. Finally, numerical results are provided to show the potential performance gains of active IRS as compared to passive IRS and traditional active relay.

cs.IT↗
arXiv2023

Joint Beam Scheduling and Power Allocation for SWIPT in Mixed Near- and Far-Field Channels

Extremely large-scale array (XL-array) has emerged as a promising technology to enhance the spectrum efficiency and spatial resolution in future wireless networks, leading to a fundamental paradigm shift from conventional far-field communications towards the new near-field communications. Different from the existing works that mostly considered simultaneous wireless information and power transfer (SWIPT) in the far field, we consider in this paper a new and practical scenario, called mixed near- and far-field SWIPT, in which energy harvesting (EH) and information decoding (ID) receivers are located in the near- and far-field regions of the XL-array base station (BS), respectively. Specifically, we formulate an optimization problem to maximize the weighted sum-power harvested at all EH receivers by jointly designing the BS beam scheduling and power allocation, under the constraints on the ID sum-rate and BS transmit power. To solve this nonconvex optimization problem, an efficient algorithm is proposed to obtain a suboptimal solution by leveraging the binary variable elimination and successive convex approximation methods. Numerical results demonstrate that our proposed joint design achieves substantial performance gain over other benchmark schemes.

eess.SP↗
arXiv2023

A Novel Two-Layer Codebook Based Near-Field Beam Training for Intelligent Reflecting Surface

In this paper, we study the codebook-based near-field beam training for intelligent reflecting surfaces (IRSs) aided wireless system. In the considered model, the near-field beam training is critical to focus signals at the location of user equipment (UE) to obtain prominent IRS array gain. However, existing codebook schemes cannot achieve low training overhead and high receiving power simultaneously. To tackle this issue, a novel two-layer codebook based beam training scheme is proposed. The layer-1 codebook is designed based on the omnidirectionality of a random-phase beam pattern, which estimates the UE distance with training overhead equivalent to that of one DFT codeword. Then, based on the estimated UE distance, the layer-2 codebook is generated to scan candidate UE locations and obtain the optimal codeword for IRS beamforming. Numerical results show that compared with benchmarks, the proposed two-layer beam training scheme achieves more accurate UE distance and angle estimation, higher data rate, and smaller training overhead.

cs.IT↗
arXiv2023

Two-Stage Hierarchical Beam Training for Near-Field Communications

Extremely large-scale array (XL-array) has emerged as a promising technology to improve the spectrum efficiency and spatial resolution of future wireless systems. However, the huge number of antennas renders the users more likely to locate in the near-field (instead of the far-field) region of the XL-array with spherical wavefront propagation. This inevitably incurs prohibitively high beam training overhead since it requires a two-dimensional (2D) beam search over both the angular and distance domains. To address this issue, we propose in this paper an efficient two-stage hierarchical beam training method for near-field communications. Specifically, in the first stage, we employ the central sub-array of the XL-array to search for a coarse user direction in the angular domain with conventional far-field hierarchical codebook. Then, in the second stage, given the coarse user direction, we progressively search for the fine-grained user direction-and-distance in the polar domain with a dedicatedly designed codebook. Numerical results show that our proposed two-stage hierarchical beam training method can achieve over 99% training overhead reduction as compared to the 2D exhaustive search, yet achieving comparable rate performance.

cs.IT↗
arXiv2023

Intelligent Reflecting Surface Aided Wireless Sensing: Applications and Design Issues

Intelligent reflecting surface (IRS) is an emerging technology that is able to significantly improve the performance of wireless communications, by smartly tuning signal reflections at a large number of passive reflecting elements. On the other hand, with ubiquitous wireless devices and ambient radio-frequency signals, wireless sensing has become a promising new application for the next-generation/6G wireless networks. By synergizing low-cost IRS and fertile wireless sensing applications, this article proposes a new IRS-aided sensing paradigm for enhancing the performance of wireless sensing cost-effectively. First, we provide an overview of wireless sensing applications and the new opportunities of utilizing IRS for overcoming their performance limitations in practical scenarios. Next, we discuss IRS-aided sensing schemes based on three approaches, namely, passive sensing, semi-passive sensing, and active sensing. We compare their pros and cons in terms of performance, hardware cost and implementation complexity, and outline their main design issues including IRS deployment, channel acquisition and reflection design, as well as sensing algorithms. Finally, numerical results are presented to demonstrate the great potential of IRS for improving wireless sensing accuracy and the superior performance of IRS active sensing compared to other schemes.

eess.SP↗
arXiv2023

Mixed Near- and Far-Field Communications for Extremely Large-Scale Array: An Interference Perspective

Extremely large-scale array (XL-array) is envisioned to achieve super-high spectral efficiency in future wireless networks. Different from the existing works that mostly focus on the near-field communications, we consider in this paper a new and practical scenario, called mixed near- and far-field communications, where there exist both near- and far-field users in the network. For this scenario, we first obtain a closed-form expression for the inter-user interference at the near-field user caused by the far-field beam by using Fresnel functions, based on which the effects of the number of BS antennas, far-field user (FU) angle, near-field user (NU) angle and distance are analyzed. We show that the strong interference exists when the number of the BS antennas and the NU distance are relatively small, and/or the NU and FU angle-difference is small. Then, we further obtain the achievable rate of the NU as well as its rate loss caused by the FU interference. Last, numerical results are provided to corroborate our analytical results.

eess.SP↗
arXiv2023

Multi-Active Multi-Passive (MAMP)-IRS Aided Wireless Communication: A Multi-Hop Beam Routing Design

Prior studies on intelligent reflecting surface (IRS) have mostly considered wireless communication systems aided by a single passive IRS, which, however, has limited control over wireless propagation environment and suffers severe product-distance path-loss. To address these issues, we propose in this paper a new multi-active multi-passive (MAMP)-IRS aided wireless communication system, where a number of active and passive IRSs are deployed to assist the downlink communication in complex environment, by establishing a multi-hop reflection path across active and passive IRSs. An optimization problem is formulated to maximize the achievable rate of a typical user by designing the active-and-passive IRS routing path as well as the joint beamforming of the BS and selected active/passive IRSs. To draw useful insights into the optimal design, we first consider a special case of the single-active multi-passive (SAMP)-IRS aided system. For this case, we propose an efficient algorithm to obtain its optimal solution by first optimizing the joint beamforming given any SAMP-IRS routing path, and then optimizing the routing path by using a new path decomposition method and graph theory. Next, for the general MAMP-IRS aided system, we show that its challenging beam routing optimization problem can be efficiently solved by a new two-phase approach. Its key idea is to first optimize the inner passive-IRS beam routing between each two active IRSs for effective channel power gain maximization, followed by an outer active-IRS beam routing optimization for rate maximization. Last, numerical results are provided to demonstrate the effectiveness of the proposed MAMP-IRS beam routing scheme.

cs.IT↗
arXiv2022

UAV-Assisted Image Acquisition: 3D UAV Trajectory Design and Camera Control

In this paper, we consider a new unmanned aerial vehicle (UAV)-assisted oblique image acquisition system where a UAV is dispatched to take images of multiple ground targets (GTs). To study the three-dimensional (3D) UAV trajectory design for image acquisition, we first propose a novel UAV-assisted oblique photography model, which characterizes the image resolution with respect to the UAV's 3D image-taking location. Then, we formulate a 3D UAV trajectory optimization problem to minimize the UAV's traveling distance subject to the image resolution constraints. The formulated problem is shown to be equivalent to a modified 3D traveling salesman problem with neighbourhoods, which is NP-hard in general. To tackle this difficult problem, we propose an iterative algorithm to obtain a high-quality suboptimal solution efficiently, by alternately optimizing the UAV's 3D image-taking waypoints and its visiting order for the GTs. Numerical results show that the proposed algorithm significantly reduces the UAV's traveling distance as compared to various benchmark schemes, while meeting the image resolution requirement.

cs.MM↗
arXiv2022

Active-IRS Aided Wireless Network: System Modeling and Performance Analysis

Active intelligent reflecting surface (IRS) enables flexible signal reflection control with \emph{power amplification}, thus effectively compensating the product-distance path-loss in conventional passive-IRS aided systems. In this letter, we characterize the communication performance of an active-IRS aided single-cell wireless network. To this end, we first propose a \emph{customized} IRS deployment strategy, where the active IRSs are uniformly deployed within a ring concentric with the cell to serve the users far from the base station. Next, given the Nakagami-$m$ fading channel, we characterize the cascaded active-IRS channel by using the \emph{mixture Gamma distribution} approximation and derive a closed-form expression for the mean signal-to-noise ratio (SNR) at the user averaged over channel fading. Moreover, we numerically show that to maximize the system performance, it is necessary to choose a proper active-IRS density given a fixed number of total reflecting elements, which significantly differs from the passive-IRS case for which the centralized IRS deployment scheme is better. Furthermore, the active-IRS aided wireless network achieves higher spatial throughput than the passive-IRS counterpart when the total number of reflecting elements is small.

cs.IT↗