arXiv subjects

Changzhu Liu

Publications and source records attributed to Changzhu Liu.

7 recordsLinked to original sources

arXiv2026

Secure Coverage Enhancement in Aerial Reconfigurable Intelligent Surface-Assisted High-Speed Train Communication Systems

High-speed trains (HSTs) have become a prominent means of transportation, requiring high data rates and reliable communication services for HST passengers. However, the wireless channels in HST communication systems are susceptible to various security threats, including eavesdropping. Addressing these security concerns is therefore of critical importance. One promising technology for enhancing security is the integration of a reconfigurable intelligent surface (RIS) on an unmanned aerial vehicle, referred to as an aerial reconfigurable intelligent surface (ARIS). This technology offers significant potential for improving wireless network performance, though it also introduces unique challenges in terms of physical layer security (PLS). This paper investigates the PLS of ARIS-aided HST communication systems. A problem of maximizing the weighted sum secrecy rate is formulated by jointly optimizing the active beamforming at the base station (BS) and the phase shift at the ARIS, subject to constrains on the BS transmit power and the unit modulus of the ARIS reflecting coefficient. To address this problem, a joint optimization algorithm is proposed using the block coordinate descent method. Specifically, the problem is decomposed into two subproblems: active beamforming design and ARIS phase shift optimization. The active beamforming is optimally designed via the successive convex approximation technique, while the ARIS phase shift is efficiently updated using the alternating direction method of multipliers technique. Simulation results demonstrate the rapid convergence of the proposed algorithm, which achieves a higher secrecy rate compared to existing methods in the literature.

cs.IT↗

arXiv2026

Robust Transmission Design for RIS-Assisted High-Speed Train Communication Coverage Enhancement With Imperfect Cascaded Channels

Reconfigurable intelligent surface (RIS) has recently been gained attention as an effective technique improving the coverage and performance of communication systems by creating additional communication links. Deployment of RIS is crucial for overcoming signal coverage limitations, especially in high-speed train (HST) scenarios. Considerable research has been performed assuming perfect channel state information (CSI). However, due to the rapidly time-varying fading channels and feedback delays, achieving perfect CSI at the base station (BS) is not feasible in the HST scenarios. To tackle this problem, this paper investigates a robust design strategy for RIS-aided HST communication coverage enhancement, particularly focusing on cascaded BS-RIS-user channels at BS (CBRUB). The study explores the optimization problem under two types distinct of models: centered on minimizing transmit power subject to worst-case rate constraints within the bounded CSI error (BCSIE) model, and the other focusing on outage probability (OP) constraints under the statistical CSI error (SCSIE) model. We use the S-procedure to approximate the non-convex (NC) constraints, converting the worst-case rate constraints into linear matrix inequalities. Additionally, the Bernstein-type inequality is applied to transform the OP constraints into second-order cone constraints and linear inequalities. The simulation analysis results show that CBRUB errors have a significant effect on system performance compared to direct CSI errors.

cs.IT↗

arXiv2024

Refracting Reconfigurable Intelligent Surface Assisted URLLC for Millimeter Wave High-Speed Train Communication Coverage Enhancement

High-speed train (HST) has garnered significant attention from both academia and industry due to the rapid development of railways worldwide. Millimeter wave (mmWave) communication, known for its large bandwidth is an effective way to address performance bottlenecks in cellular network based HST wireless communication systems. However, mmWave signals suffer from significant path loss when traversing carriage, posing substantial challenges to cellular networks. To address this issue, reconfigurable intelligent surfaces (RIS) have gained considerable interest for its ability to enhance cell coverage by reflecting signals toward receiver. Ensuring communication reliability, a core performance indicators of ultra-reliable and low-latency communications (URLLC) in fifth-generation systems, is crucial for providing steady and reliable data transmissions along railways, particularly for delivering safety and control messages and monitoring HST signaling information. In this paper, we investigate a refracting RIS-assisted multi-user multiple-input single-output URLLC system in mmWave HST communications. We propose a sum rate maximization problem, subject to base station beamforming constraint, as well as refracting RIS discrete phase shifts and reliability constraints. To solve this optimization problem, we design a joint optimization algorithm based on alternating optimization method. This involves decoupling the original optimization problem into active beamforming design and packet error probability optimization subproblem, and discrete phase shift design subproblems. These subproblems are addressed exploiting Lagrangian dual method and the local search method, respectively. Simulation results demonstrate the fast convergence of the proposed algorithm and highlight the benefits of refracting RIS adoption for sum rate improvement in mmWave HST networks.

cs.IT↗

arXiv2023

Reconfigurable Intelligent Surface Assisted High-Speed Train Communications: Coverage Performance Analysis and Placement Optimization

Reconfigurable intelligent surface (RIS) emerges as an efficient and promising technology for the next wireless generation networks and has attracted a lot of attention owing to the capability of extending wireless coverage by reflecting signals toward targeted receivers. In this paper, we consider a RIS-assisted high-speed train (HST) communication system to enhance wireless coverage and improve coverage probability. First, coverage performance of the downlink single-input-single-output system is investigated, and the closed-form expression of coverage probability is derived. Moreover, travel distance maximization problem is formulated to facilitate RIS discrete phase design and RIS placement optimization, which is subject to coverage probability constraint. Simulation results validate that better coverage performance and higher travel distance can be achieved with deployment of RIS. The impacts of some key system parameters including transmission power, signal-to-noise ratio threshold, number of RIS elements, number of RIS quantization bits, horizontal distance between base station and RIS, and speed of HST on system performance are investigated. In addition, it is found that RIS can well improve coverage probability with limited power consumption for HST communications.

cs.IT↗

arXiv2022

5G for Railways: the Next Generation Railway Dedicated Communications

To overcome increasing traffic, provide various new services, further ensure safety and security, significantly improve travel comfort, a new communication system for railways is required. Since 2019, public networks have been evolving to the fifth generation communication (5G) worldwide, whereas the main communication system of railway is still based on the second generation communication (2G). It is thus necessary for railways to replace the current 2G-based technology with the next generation railway dedicated communication system with improved capacity and capability, and the 5G for railways (5G-R) technology is a promising solution for further intelligent railways. This article gives a review of the current developments of the next generation railway communications, followed by a discussion of the typical services that the 5G-R can provide to intelligent railways. Then, main application scenarios of 5G-R are summarized and system configurations are compared. Some key technologies of 5G-R such as network architecture, massive MIMO, millimeter-wave, multiple access scheme, ultra-reliable low latency communication, and advanced video processing are presented and analyzed. Finally, some challenges of 5G-R are highlighted.

eess.SY↗

arXiv2022

Coverage Probability Analysis of RIS-Assisted High-Speed Train Communications

Reconfigurable intelligent surface (RIS) has received increasing attention due to its capability of extending cell coverage by reflecting signals toward receivers. This paper considers a RIS-assisted high-speed train (HST) communication system to improve the coverage probability. We derive the closed-form expression of coverage probability. Moreover, we analyze impacts of some key system parameters, including transmission power, signal-to-noise ratio threshold, and horizontal distance between base station and RIS. Simulation results verify the efficiency of RIS-assisted HST communications in terms of coverage probability.

cs.IT↗

arXiv2021

Radio Communication Scenarios in 5G-Railways

With the rapid development of railways, especially high-speed railways, there is an increasingly urgent demand for new wireless communication system for railways. Taking the mature 5G technology as an opportunity, 5G-railways (5G-R) have been widely regarded as a solution to meet the diversified demands of railway wireless communications. For the design, deployment and improvement of 5G-R networks, radio communication scenario classification plays an important role, affecting channel modeling and system performance evaluation. In this paper, a standardized radio communication scenario classification, including 18 scenarios, is proposed for 5G-R. This paper analyzes the differences of 5G-R scenarios compared with the traditional cellular networks and GSM-railways, according to 5G-R requirements and the unique physical environment and propagation characteristics. The proposed standardized scenario classification helps deepen the research of 5G-R and promote the development and application of the existing advanced technologies in railways.

cs.NI↗