arXiv subjects

Chao Jin

Publications and source records attributed to Chao Jin.

43 records · Page 3Linked to original sources

arXiv2015

Spatial-Dependent Diffusion of Cosmic Rays and the Ratio of pbar/p, B/C

Recent precise measurements of cosmic ray spectral revealed an anomalous hardening at ~200 GV for nuclei from PAMELA, CREAM, ATIC, AMS02 experiments and at tens of GeV for primary electron derived from AMS02 experiment. Particularly, the latest observation of pbar/p ratio by AMS02 demonstrated a flat distribution, which further validated the spectrum anomalies of secondary particles. All those new phenomena indicated that the conventional propagation model of cosmic rays meet challenge. In this work, the spatial-dependent propagation coefficient D(r,z,ρ) is employed by tracing the source distribution under the physical picture of two-halo model in DRAGON package. Under such scenario, the model calculation will result in a two-component spectral for primary nuclei and electron. Simultaneously, due to the smaller rigidity dependence of D(r,z,ρ) in galactic disk, the ratio of secondary-to-primary will be inevitablly flatter than the calculation in the conventional propagation model. As a result, we can reproduce the spectral hardening of proton, electron and the flat ratio of pbar/p and B/C by only adopting the spatial-dependent propagation coefficient D(r,z,ρ) in galactic disk.

astro-ph.HE↗

arXiv2015

Lensfree Spectral Light-field Fusion Microscopy for Contrast- and Resolution-enhanced Imaging of Biological Specimens

A lensfree spectral light-field fusion microscopy (LSLFM) system is presented for enabling contrast- and resolution-enhanced imaging of biological specimens. LSLFM consists of a pulsed multispectral lensfree microscope for capturing interferometric light-field encodings at various wavelengths, and Bayesian-based fusion to reconstruct a fused object light-field from the encodings. By fusing unique object detail information captured at different wavelengths, LSLFM can achieve improved resolution, contrast, and signal-to-noise ratio (SNR) over a single-channel lensfree microscopy system. A five-channel LSLFM system was developed and quantitatively evaluated to validate the design. Experimental results demonstrated that the LSLFM system provided SNR improvements of 6-12 dB, as well as a six-fold improvement in the dispersion index (DI), over that achieved using a single-channel, resolution-enhancing lensfree deconvolution microscopy system or its multi-wavelength counterpart. Furthermore, the LSLFM system achieved an increase in numerical aperture (NA) of ~16% over a single-channel resolution-enhancing lensfree deconvolution microscopy system at the highest-resolution wavelength used in the study. Samples of Staurastrum paradoxum, a waterborne algae, and human corneal epithelial cells were imaged using the system to illustrate its potential for enhanced imaging of biological specimens.

physics.optics↗

arXiv2015

Bayesian-based aberration correction and numerical diffraction for improved lensfree on-chip microscopy of biological specimens

Lensfree on-chip microscopy is an emerging imaging technique that can be used to visualize and study biological specimens without the need for imaging lens systems. Important issues that can limit the performance of lensfree on-chip microscopy include interferometric aberrations, acquisition noise, and image reconstruction artifacts. In this study, we introduce a Bayesian-based method for performing aberration correction and numerical diffraction that accounts for all three of these issues to improve the effective numerical aperture (NA) and signal-to-noise ratio (SNR) of the reconstructed microscopic image. The proposed method was experimentally validated using the USAF resolution target as well as real waterborne Anabaena flos-aquae samples, demonstrating improvements in NA by ~25% over the standard method, and improvements in SNR of 2.3 dB and 3.8 dB in the reconstructed image when compared to the reconstructed images produced using the standard method and a maximum likelihood estimation method, respectively.

physics.optics↗

arXiv2014

Liquid Metal as Connecting or Functional Recovery Channel for the Transected Sciatic Nerve

In this article, the liquid metal GaInSn alloy (67% Ga, 20.5% In, and 12.5% Sn by volume) is proposed for the first time to repair the peripheral neurotmesis as connecting or functional recovery channel. Such material owns a group of unique merits in many aspects, such as favorable fluidity, super compliance, high electrical conductivity, which are rather beneficial for conducting the excited signal of nerve during the regeneration process in vivo. It was found that the measured electroneurographic signal from the transected bullfrog sciatic nerve reconnected by the liquid metal after the electrical stimulation was close to that from the intact sciatic nerve. The control experiments through replacement of GaInSn with the conventionally used Riger Solution revealed that Riger Solution could not be competitive with the liquid metal in the performance as functional recovery channel. In addition, through evaluation of the basic electrical property, the material GaInSn works more suitable for the conduction of the weak electroneurographic signal as its impedance was several orders lower than that of the well-known Riger Solution. Further, the visibility under the plain radiograph of such material revealed the high convenience in performing secondary surgery. This new generation nerve connecting material is expected to be important for the functional recovery during regeneration of the injured peripheral nerve and the optimization of neurosurgery in the near future.

physics.med-ph↗

arXiv2013

Liquid-Solid Phase Transition Alloy as Reversible and Rapid Molding Bone Cement

Bone cement has been demonstrated as an essential restorative material in the orthopedic surgery. However current materials often imply unavoidable drawbacks, such as tissue-cement reaction induced thermal injuries and troublesome revision procedure. Here we proposed an injectable alloy cement to address such problems through its liquid-solid phase transition mechanism. The cement is made of a unique alloy BiInSnZn with a specifically designed low melting point 57.5°C. This property enables its rapid molding into various shapes with high plasticity. Some fundamental characteristics including mechanical strength behaviors and phase transition-induced thermal features have been measured to demonstrate the competence of alloy as unconventional cement with favorable merits. Further biocompatible tests showed that this material could be safely employed in vivo. In addition, experiments also found the alloy cement capability as an excellent contrast agent for radiation imaging. Particularly, the proposed alloy cement with reversible phase transition feature significantly simplifies the revision of cement and prosthesis. This study opens the way to implement alloy material as bone cement to fulfill diverse clinical needs.

cond-mat.mtrl-sci↗

arXiv2013

Parity Declustering for Fault-Tolerant Storage Systems via $t$-designs

Parity declustering allows faster reconstruction of a disk array when some disk fails. Moreover, it guarantees uniform reconstruction workload on all surviving disks. It has been shown that parity declustering for one-failure tolerant array codes can be obtained via Balanced Incomplete Block Designs. We extend this technique for array codes that can tolerate an arbitrary number of disk failures via $t$-designs.

cs.IT↗

arXiv2009

Jeeva: Enterprise Grid-enabled Web Portal for Protein Secondary Structure Prediction

This paper presents a Grid portal for protein secondary structure prediction developed by using services of Aneka, a .NET-based enterprise Grid technology. The portal is used by research scientists to discover new prediction structures in a parallel manner. An SVM (Support Vector Machine)-based prediction algorithm is used with 64 sample protein sequences as a case study to demonstrate the potential of enterprise Grids.

cs.DC↗