Searcharxiv⌕ Search

arXiv subjects

Chao-Kai Wen

Publications and source records attributed to Chao-Kai Wen.

At least 55 records · Page 3Linked to original sources

Deep Learning-based Position-domain Channel Extrapolation for Cell-Free Massive MIMO

To reduce channel acquisition overhead, spatial, time, and frequency-domain channel extrapolation techniques have been widely studied. In this paper, we propose a novel deep learning-based Position-domain Channel Extrapolation framework (named PCEnet) for cell-free massive multiple-input multiple-output (MIMO) systems. The user's position, which contains significant channel characteristic information, can greatly enhance the efficiency of channel acquisition. In cell-free massive MIMO, while the propagation environments between different base stations and a specific user vary and their respective channels are uncorrelated, the user's position remains constant and unique across all channels. Building on this, the proposed PCEnet framework leverages the position as a bridge between channels to establish a mapping between the characteristics of different channels, thereby using one acquired channel to assist in the estimation and feedback of others. Specifically, this approach first utilizes neural networks (NNs) to infer the user's position from the obtained channel. {The estimated position, shared among BSs through a central processing unit (CPU)}, is then fed into an NN to design pilot symbols and concatenated with the feedback information to the channel reconstruction NN to reconstruct other channels, thereby significantly enhancing channel acquisition performance. Additionally, we propose a simplified strategy where only the estimated position is used in the reconstruction process without modifying the pilot design, thereby reducing latency. Furthermore, we introduce a position label-free approach that infers the relative user position instead of the absolute position, eliminating the need for ground truth position labels during the localization NN training. Simulation results demonstrate that the proposed PCEnet framework reduces pilot and feedback overheads by up to 50%.

cs.IT↗

Learning-Aided Iterative Receiver for Superimposed Pilots: Design and Experimental Evaluation

The superimposed pilot transmission scheme offers substantial potential for improving spectral efficiency in MIMO-OFDM systems, but it presents significant challenges for receiver design due to pilot contamination and data interference. To address these issues, we propose an advanced iterative receiver based on joint channel estimation, detection, and decoding, which refines the receiver outputs through iterative feedback. The proposed receiver incorporates two adaptive channel estimation strategies to enhance robustness under time-varying and mismatched channel conditions. First, a variational message passing (VMP) method and its low-complexity variant (VMP-L) are introduced to perform inference without relying on time-domain correlation. Second, a deep learning (DL) based estimator is developed, featuring a convolutional neural network with a despreading module and an attention mechanism to extract and fuse relevant channel features. Extensive simulations under multi-stream and high-mobility scenarios demonstrate that the proposed receiver consistently outperforms conventional orthogonal pilot baselines in both throughput and block error rate. Moreover, over-the-air experiments validate the practical effectiveness of the proposed design. Among the methods, the DL based estimator achieves a favorable trade-off between performance and complexity, highlighting its suitability for real-world deployment in dynamic wireless environments.

cs.IT↗

Cooperative Mapping, Localization, and Beam Management via Multi-Modal SLAM in ISAC Systems

Simultaneous localization and mapping (SLAM) plays a critical role in integrated sensing and communication (ISAC) systems for sixth-generation (6G) millimeter-wave (mmWave) networks, enabling environmental awareness and precise user equipment (UE) positioning. While cooperative multi-user SLAM has demonstrated potential in leveraging distributed sensing, its application within multi-modal ISAC systems remains limited, particularly in terms of theoretical modeling and communication-layer integration. This paper proposes a novel multi-modal SLAM framework that addresses these limitations through three key contributions. First, a Bayesian estimation framework is developed for cooperative multi-user SLAM, along with a two-stage algorithm for robust radio map construction under dynamic and heterogeneous sensing conditions. Second, a multi-modal localization strategy is introduced, fusing SLAM results with camera-based multi-object tracking and inertial measurement unit (IMU) data via an error-aware model, significantly improving UE localization in multi-user scenarios. Third, a sensing-aided beam management scheme is proposed, utilizing global radio maps and localization data to generate UE-specific prior information for beam selection, thereby reducing inter-user interference and enhancing downlink spectral efficiency. Simulation results demonstrate that the proposed system improves radio map accuracy by up to 60%, enhances localization accuracy by 37.5%, and significantly outperforms traditional methods in both indoor and outdoor environments.

cs.IT↗

Simultaneous Localization and Mapping Using Active mmWave Sensing in 5G NR

Millimeter-wave (mmWave) 5G New Radio (NR) communication systems, with their high-resolution antenna arrays and extensive bandwidth, offer a transformative opportunity for high-throughput data transmission and advanced environmental sensing. Although passive sensing-based SLAM techniques can estimate user locations and environmental reflections simultaneously, their effectiveness is often constrained by assumptions of specular reflections and oversimplified map representations. To overcome these limitations, this work employs a mmWave 5G NR system for active sensing, enabling it to function similarly to a laser scanner for point cloud generation. Specifically, point clouds are extracted from the power delay profile estimated from each beam direction using a binary search approach. To ensure accuracy, hardware delays are calibrated with multiple predefined target points. Pose variations of the terminal are then estimated from point cloud data gathered along continuous trajectory viewpoints using point cloud registration algorithms. Loop closure detection and pose graph optimization are subsequently applied to refine the sensing results, achieving precise terminal localization and detailed radio map reconstruction. The system is implemented and validated through both simulations and experiments, confirming the effectiveness of the proposed approach.

eess.SP↗

LVM4CSI: Enabling Direct Application of Pre-Trained Large Vision Models for Wireless Channel Tasks

Accurate channel state information (CSI) is critical to the performance of wireless communication systems, especially with the increasing scale and complexity introduced by 5G and future 6G technologies. While artificial intelligence (AI) offers a promising approach to CSI acquisition and utilization, existing methods largely depend on task-specific neural networks (NNs) that require expert-driven design and large training datasets, limiting their generalizability and practicality. To address these challenges, we propose LVM4CSI, a general and efficient framework that leverages the structural similarity between CSI and computer vision (CV) data to directly apply large vision models (LVMs) pre-trained on extensive CV datasets to wireless tasks without any fine-tuning, in contrast to large language model-based methods that generally necessitate fine-tuning. LVM4CSI maps CSI tasks to analogous CV tasks, transforms complex-valued CSI into visual formats compatible with LVMs, and integrates lightweight trainable layers to adapt extracted features to specific communication objectives. We validate LVM4CSI through three representative case studies, including channel estimation, human activity recognition, and user localization. Results demonstrate that LVM4CSI achieves comparable or superior performance to task-specific NNs, including an improvement exceeding 9.61 dB in channel estimation and approximately 40% reduction in localization error. Furthermore, it significantly reduces the number of trainable parameters and eliminates the need for task-specific NN design.

cs.IT↗

Joint Spatial Division and Multiplexing with Customized Orthogonal Group Channels in Multi-RIS-Assisted Systems

Reconfigurable intelligent surfaces (RISs) offer the unique capability to reshape the radio environment, thereby simplifying transmission schemes traditionally contingent on channel conditions. Joint spatial division and multiplexing (JSDM) emerges as a low-overhead transmission scheme for multi-user equipment (UE) scenarios, typically requiring complex matrix decomposition to achieve block-diagonalization of the effective channel matrix. In this study, we introduce an innovative JSDM design that leverages RISs to customize channels, thereby streamlining the overall procedures. By strategically positioning RISs at the discrete Fourier transform (DFT) directions of the base station (BS), we establish orthogonal line-of-sight links within the BS-RIS channel, enabling a straightforward pre-beamforming design. Based on UE grouping, we devise reflected beams of the RIS with optimized directions to mitigate inter-group interference in the RISs-UEs channel. An approximation of the channel cross-correlation coefficient is derived and serves as a foundation for the RISs-UEs association, further diminishing inter-group interference. Numerical results substantiate the efficacy of our RIS-customized JSDM in not only achieving effective channel block-diagonalization but also in significantly enhancing the sum spectral efficiency for multi-UE transmissions.

cs.IT↗

RIS-Aided Cooperative ISAC Networks for Structural Health Monitoring

Integrated sensing and communication (ISAC) is a key feature of future cellular systems, enabling applications such as intruder detection, monitoring, and tracking using the same infrastructure. However, its potential for structural health monitoring (SHM), which requires the detection of slow and subtle structural changes, remains largely unexplored due to challenges such as multipath interference and the need for ultra-high sensing precision. This study introduces a novel theoretical framework for SHM via ISAC by leveraging reconfigurable intelligent surfaces (RIS) as reference points in collaboration with base stations and users. By dynamically adjusting RIS phases to generate distinct radio signals that suppress background multipath interference, measurement accuracy at these reference points is enhanced. We theoretically analyze RIS-aided collaborative sensing in three-dimensional cellular networks using Fisher information theory, demonstrating how increasing observation time, incorporating additional receivers (even with self-positioning errors), optimizing RIS phases, and refining collaborative node selection can reduce the position error bound to meet SHM's stringent accuracy requirements. Furthermore, we develop a Bayesian inference model to identify structural states and validate damage detection probabilities. Both theoretical and numerical analyses confirm ISAC's capability for millimeter-level deformation detection, highlighting its potential for high-precision SHM applications.

cs.IT↗

Learned Off-Grid Imager for Low-Altitude Economy with Cooperative ISAC Network

The low-altitude economy is emerging as a key driver of future economic growth, necessitating effective flight activity surveillance using existing mobile cellular network sensing capabilities. However, traditional monostatic and localizationbased sensing methods face challenges in fusing sensing results and matching channel parameters. To address these challenges, we model low-altitude surveillance as a compressed sensing (CS)-based imaging problem by leveraging the cooperation of multiple base stations and the inherent sparsity of aerial images. Additionally, we derive the point spread function to analyze the influences of different antenna, subcarrier, and resolution settings on the imaging performance. Given the random spatial distribution of unmanned aerial vehicles (UAVs), we propose a physics-embedded learning method to mitigate off-grid errors in traditional CS-based approaches. Furthermore, to enhance rare UAV detection in vast low-altitude airspace, we integrate an online hard example mining scheme into the loss function design, enabling the network to adaptively focus on samples with significant discrepancies from the ground truth during training. Simulation results demonstrate the effectiveness of the proposed low-altitude surveillance framework. The proposed physicsembedded learning algorithm achieves a 97.55% detection rate, significantly outperforming traditional CS-based methods under off-grid conditions. Part of the source code for this paper will be soon accessed at https://github.com/kiwi1944/LAEImager.

cs.IT↗

Experimental Evaluation of Multiple Active RISs for 5G MIMO Commercial Networks

While numerous experimental studies have demonstrated the feasibility of reconfigurable intelligent surface (RIS) technology, most have primarily focused on extending coverage. In contrast, this paper presents an experimental evaluation of multiple active RISs deployed in a 5G multiple-input multiple-output (MIMO) commercial network, emphasizing enhancements in channel rank and throughput. We propose a low-complexity, codebook-based beamforming algorithm specifically tailored for multi-RIS configurations, which diversifies directional channels and reduces reliance on explicit channel state information. Field tests using a commercial base station and user equipment reveal that the multi-RIS system can improve channel rank and throughput by up to 14% compared to single-RIS deployments, while maintaining low computational complexity. These findings underscore the practical benefits of active multi-RIS systems for next-generation networks.

cs.IT↗

Cooperative ISAC Network for Off-Grid Imaging-based Low-Altitude Surveillance

The low-altitude economy has emerged as a critical focus for future economic development, emphasizing the urgent need for flight activity surveillance utilizing the existing sensing capabilities of mobile cellular networks. Traditional monostatic or localization-based sensing methods, however, encounter challenges in fusing sensing results and matching channel parameters. To address these challenges, we propose an innovative approach that directly draws the radio images of the low-altitude space, leveraging its inherent sparsity with compressed sensing (CS)-based algorithms and the cooperation of multiple base stations. Furthermore, recognizing that unmanned aerial vehicles (UAVs) are randomly distributed in space, we introduce a physics-embedded learning method to overcome off-grid issues inherent in CS-based models. Additionally, an online hard example mining method is incorporated into the design of the loss function, enabling the network to adaptively concentrate on the samples bearing significant discrepancy with the ground truth, thereby enhancing its ability to detect the rare UAVs within the expansive low-altitude space. Simulation results demonstrate the effectiveness of the imaging-based low-altitude surveillance approach, with the proposed physics-embedded learning algorithm significantly outperforming traditional CS-based methods under off-grid conditions.

cs.IT↗

Learned Intelligent Recognizer with Adaptively Customized RIS Phases in Communication Systems

This study presents an advanced wireless system that embeds target recognition within reconfigurable intelligent surface (RIS)-aided communication systems, powered by cuttingedge deep learning innovations. Such a system faces the challenge of fine-tuning both the RIS phase shifts and neural network (NN) parameters, since they intricately interdepend on each other to accomplish the recognition task. To address these challenges, we propose an intelligent recognizer that strategically harnesses every piece of prior action responses, thereby ingeniously multiplexing downlink signals to facilitate environment sensing. Specifically, we design a novel NN based on the long short-term memory (LSTM) architecture and the physical channel model. The NN iteratively captures and fuses information from previous measurements and adaptively customizes RIS configurations to acquire the most relevant information for the recognition task in subsequent moments. Tailored dynamically, these configurations adapt to the scene, task, and target specifics. Simulation results reveal that our proposed method significantly outperforms the state-of-the-art method, while resulting in minimal impacts on communication performance, even as sensing is performed simultaneously.

cs.IT↗

AI-based CSI Feedback with Digital Twins: Real-World Validation and Insights

Deep learning (DL) has shown great potential for enhancing channel state information (CSI) feedback in multiple-input multiple-output (MIMO) communication systems, a subject currently under study by the 3GPP standards body. Digital twins (DTs) have emerged as an effective means to generate site-specific datasets for training DL-based CSI feedback models. However, most existing studies rely solely on simulations, leaving the effectiveness of DTs in reducing DL training costs yet to be validated through realistic experimental setups. This paper addresses this gap by establishing a real-world (RW) environment and corresponding virtual channels using ray tracing with replicated 3D models and accurate antenna properties. We evaluate whether models trained in DT environments can effectively operate in RW scenarios and quantify the benefits of online learning (OL) for performance enhancement. Results show that a dedicated DT remains essential even with OL to achieve satisfactory performance in RW scenarios.

cs.IT↗

Distributed U6G ELAA Communication Systems: Channel Measurement and Small-Scale Fading Characterization

The distributed upper 6 GHz (U6G) extra-large scale antenna array (ELAA) is a key enabler for future wireless communication systems, offering higher throughput and wider coverage, similar to existing ELAA systems, while effectively mitigating unaffordable complexity and hardware overhead. Uncertain channel characteristics, however, present significant bottleneck problems that hinder the hardware structure and algorithm design of the distributed U6G ELAA system. In response, we construct a U6G channel sounder and carry out extensive measurement campaigns across various typical scenarios. Initially, U6G channel characteristics, particularly small-scale fading characteristics, are unveiled and compared across different scenarios. Subsequently, the U6G ELAA channel characteristics are analyzed using a virtual array comprising 64 elements. Furthermore, inspired by the potential for distributed processing, we investigate U6G ELAA channel characteristics from the perspectives of subarrays and sub-bands, including subarray-wise nonstationarities, consistencies, far-field approximations, and sub-band characteristics. Through a combination of analysis and measurement validation, several insights and benefits, particularly suitable for distributed processing in U6G ELAA systems, are revealed, which provides practical validation for the deployment of U6G ELAA systems.

eess.SP↗

Joint Channel Estimation and Signal Detection for MIMO-OFDM: A Novel Data-Aided Approach with Reduced Computational Overhead

The acquisition of channel state information (CSI) is essential in MIMO-OFDM communication systems. Data-aided enhanced receivers, by incorporating domain knowledge, effectively mitigate performance degradation caused by imperfect CSI, particularly in dynamic wireless environments. However, existing methodologies face notable challenges: they either refine channel estimates within MIMO subsystems separately, which proves ineffective due to deviations from assumptions regarding the time-varying nature of channels, or fully exploit the time-frequency characteristics but incur significantly high computational overhead due to dimensional concatenation. To address these issues, this study introduces a novel data-aided method aimed at reducing complexity, particularly suited for fast-fading scenarios in fifth-generation (5G) and beyond networks. We derive a general form of a data-aided linear minimum mean-square error (LMMSE)-based algorithm, optimized for iterative joint channel estimation and signal detection. Additionally, we propose a computationally efficient alternative to this algorithm, which achieves comparable performance with significantly reduced complexity. Empirical evaluations reveal that our proposed algorithms outperform several state-of-the-art approaches across various MIMO-OFDM configurations, pilot sequence lengths, and in the presence of time variability. Comparative analysis with basis expansion model-based iterative receivers highlights the superiority of our algorithms in achieving an effective trade-off between accuracy and computational complexity.

cs.IT↗

AdapCsiNet: Environment-Adaptive CSI Feedback via Scene Graph-Aided Deep Learning

Accurate channel state information (CSI) is critical for realizing the full potential of multiple-antenna wireless communication systems. While deep learning (DL)-based CSI feedback methods have shown promise in reducing feedback overhead, their generalization capability across varying propagation environments remains limited due to their data-driven nature. Existing solutions based on online training improve adaptability but impose significant overhead in terms of data collection and computational resources. In this work, we propose AdapCsiNet, an environment-adaptive DL-based CSI feedback framework that eliminates the need for online training. By integrating environmental information -- represented as a scene graph -- into a hypernetwork-guided CSI reconstruction process, AdapCsiNet dynamically adapts to diverse channel conditions. A two-step training strategy is introduced to ensure baseline reconstruction performance and effective environment-aware adaptation. Simulation results demonstrate that AdapCsiNet achieves up to 46.4% improvement in CSI reconstruction accuracy and matches the performance of online learning methods without incurring additional runtime overhead.

cs.IT↗

Prompt-Enabled Large AI Models for CSI Feedback

Artificial intelligence (AI) has emerged as a promising tool for channel state information (CSI) feedback. While recent research primarily focuses on improving feedback accuracy on a specific dataset through novel architectures, the underlying mechanism of AI-based CSI feedback remains unclear. This study explores the mechanism through analyzing performance across diverse datasets, with findings suggesting that superior feedback performance stems from AI models' strong fitting capabilities and their ability to leverage environmental knowledge. Building on these findings, we propose a prompt enabled large AI model (LAM) for CSI feedback. The LAM employs powerful transformer blocks and is trained on extensive datasets from various scenarios. Meanwhile, the channel distribution (environmental knowledge) -- represented as the mean of channel magnitude in the angular-delay domain -- is incorporated as a prompt within the decoder to further enhance reconstruction quality. Simulation results confirm that the proposed prompt-enabled LAM significantly improves feedback accuracy and generalization performance while reducing data collection requirements in new scenarios.

cs.IT↗

Geo2ComMap: Deep Learning-Based MIMO Throughput Prediction Using Geographic Data

Accurate communication performance prediction is crucial for wireless applications such as network deployment and resource management. Unlike conventional systems with a single transmit and receive antenna, throughput (Tput) estimation in antenna array-based multiple-output multiple-input (MIMO) systems is computationally intensive, i.e., requiring analysis of channel matrices, rank conditions, and spatial channel quality. These calculations impose significant computational and time burdens. This paper introduces Geo2ComMap, a deep learning-based framework that leverages geographic databases to efficiently estimate multiple communication metrics across an entire area in MIMO systems using only sparse measurements. To mitigate extreme prediction errors, we propose a sparse sampling strategy. Extensive evaluations demonstrate that Geo2ComMap accurately predicts full-area communication metrics, achieving a median absolute error of 27.35 Mbps for Tput values ranging from 0 to 1900 Mbps.

cs.IT↗

Efficient Deployment of Deep MIMO Detection Using Learngene

Deep learning (DL) has introduced a new paradigm in multiple-input multiple-output (MIMO) detection, balancing performance and complexity. However, the practical deployment of DL-based detectors is hindered by poor generalization, necessitating costly retraining for different devices and scenarios. To address this challenge, this paper presents a novel knowledge transfer technique, termed learngene, for the design of a DL-based MIMO detector and proposes an efficient deployment framework. The proposed detector, SDNet, leverages zero-forcing detection outputs and least squares-estimated channel state information (CSI) as inputs. It is further optimized through a collective-individual paradigm to enhance knowledge transfer. In this paradigm, learngene, a reusable neural network (NN) segment, encapsulates detection meta-knowledge acquired from large-scale collective models trained by manufacturers. This segment can then be distributed to device-specific teams. By integrating learngene into different lightweight individual models, detection meta-knowledge is efficiently transferred across heterogeneous NNs, enabling adaptation to diverse devices and scenarios. Simulation results demonstrate that the proposed scheme enhances performance, enables rapid adaptation, and ensures high scalability, with transferred parameters comprising only 10.8% of the total model size.

eess.SP↗