arXiv subjects

Chao-Kai Wen

Publications and source records attributed to Chao-Kai Wen.

At least 109 records · Page 6Linked to original sources

arXiv2023

Angle-based SLAM on 5G mmWave Systems: Design, Implementation, and Measurement

Simultaneous localization and mapping (SLAM) is a key technology that provides user equipment (UE) tracking and environment mapping services, enabling the deep integration of sensing and communication. The millimeter-wave (mmWave) communication, with its larger bandwidths and antenna arrays, inherently facilitates more accurate delay and angle measurements than sub-6 GHz communication, thereby providing opportunities for SLAM. However, none of the existing works have realized the SLAM function under the 5G New Radio (NR) standard due to specification and hardware constraints. In this study, we investigate how 5G mmWave communication systems can achieve situational awareness without changing the transceiver architecture and 5G NR standard. We implement 28 GHz mmWave transceivers that deploy OFDM-based 5G NR waveform with 160 MHz channel bandwidth, and we realize beam management following the 5G NR. Furthermore, we develop an efficient successive cancellation-based angle extraction approach to obtain angles of arrival and departure from the reference signal received power measurements. On the basis of angle measurements, we propose an angle-only SLAM algorithm to track UE and map features in the radio environment. Thorough experiments and ray tracing-based computer simulations verify that the proposed angle-based SLAM can achieve sub-meter level localization and mapping accuracy with a single base station and without the requirement of strict time synchronization. Our experiments also reveal many propagation properties critical to the success of SLAM in 5G mmWave communication systems.

cs.IT↗

arXiv2023

Joint Localization and Environment Sensing by Harnessing NLOS Components in RIS-aided mmWave Communication Systems

This study explores the use of non-line-of-sight (NLOS) components in millimeter-wave (mmWave) communication systems for joint localization and environment sensing. The radar cross section (RCS) of a reconfigurable intelligent surface (RIS) is calculated to develop a general path gain model for RISs and traditional scatterers. The results show that RISs have a greater potential to assist in localization due to their ability to maintain high RCSs and create strong NLOS links. A one-stage linear weighted least squares estimator is proposed to simultaneously determine user equipment (UE) locations, velocities, and scatterer (or RIS) locations using line-of-sight (LOS) and NLOS paths. The estimator supports environment sensing and UE localization even using only NLOS paths. A second-stage estimator is also introduced to improve environment sensing accuracy by considering the nonlinear relationship between UE and scatterer locations. Simulation results demonstrate the effectiveness of the proposed estimators in rich scattering environments and the benefits of using NLOS paths for improving UE location accuracy and assisting in environment sensing. The effects of RIS number, size, and deployment on localization performance are also analyzed.

cs.IT↗

arXiv2023

Multi-timescale Channel Customization for Transmission Design in RIS-assisted MIMO Systems

The performance of transmission schemes is heavily influenced by the wireless channel, which is typically considered an uncontrollable factor. However, the introduction of reconfigurable intelligent surfaces (RISs) to wireless communications enables the customization of a preferred channel for adopted transmissions by reshaping electromagnetic waves. In this study, we propose multi-timescale channel customization for RIS-assisted multiple-input multiple-output systems to facilitate transmission design. Specifically, we customize a high-rank channel for spatial multiplexing (SM) transmission and a highly correlated rank-1 channel for beamforming (BF) transmission by designing the phase shifters of the RIS with statistical channel state information in the angle-coherent time to improve spectral efficiency (SE). We derive closed-form expressions for the approximation and upper bound of the ergodic SE and compare them to investigate the relative SE performance of SM and BF transmissions. In terms of reliability enhancement, we customize a fast-changing channel in the symbol timescale to achieve more diversity gain for SM and BF transmissions. Extensive numerical results demonstrate that flexible customization of channel characteristics for a specific transmission scheme can achieve a tradeoff between SE and bit error ratio performance.

cs.IT↗

arXiv2023

Channel Customization for Limited Feedback in RIS-assisted FDD Systems

Reconfigurable intelligent surfaces (RISs) represent a pioneering technology to realize smart electromagnetic environments by reshaping the wireless channel. \textcolor[rgb]{0,0,0}{Jointly designing the transceiver and RIS relies on the channel state information (CSI), whose feedback has not been investigated in multi-RIS-assisted frequency division duplexing systems.} In this study, the limited feedback of the RIS-assisted wireless channel is examined by capitalizing on the ability of the RIS in channel customization. \textcolor[rgb]{0,0,0}{By configuring the phase shifters of the surfaces using statistical CSI, we customize a sparse channel in rich-scattering environments, which significantly reduces the feedback overhead in designing the transceiver and RISs. Since the channel is customized in terms of singular value decomposition (SVD) with full-rank, the optimal SVD transceiver can be approached without a matrix decomposition and feeding back the complete channel parameters. The theoretical spectral efficiency (SE) loss of the proposed transceiver and RIS design is derived by considering the limited CSI quantization. To minimize the SE loss, a bit partitioning algorithm that splits the limited number of bits to quantize the CSI is developed.} Extensive numerical results show that the channel customization-based transceiver with reduced CSI can achieve satisfactory performance compared with the optimal transceiver with full CSI. Given the limited number of feedback bits, the bit partitioning algorithm can minimize the SE loss by adaptively allocating bits to quantize the channel parameters.

cs.IT↗

arXiv2023

Channel Customization for Joint Tx-RISs-Rx Design in Hybrid mmWave Systems

In strong line-of-sight millimeter-wave (mmWave) wireless systems, the rank-deficient channel severely hampers spatial multiplexing. To address this inherent deficiency, multiple reconfigurable-intelligent-surfaces (RISs) are introduced in this study to customize the wireless channel. Utilizing the RIS to reshape electromagnetic waves, we theoretically show that a favorable channel with an arbitrary tunable rank and a minimized truncated condition number can be established by elaborately designing the placement and reflection matrix of RISs. Different from existing works on multi-RISs, the number of elements needed for each RIS to combat the path loss and the limited phase control is also considered. On the basis of the proposed channel customization, a joint transmitter-RISs-receiver (Tx-RISs-Rx) design under a hybrid mmWave system is investigated to maximize the spectral efficiency. Using the proposed scheme, the optimal singular value decomposition-based hybrid beamforming at the Tx and Rx can be obtained without matrix decomposition for the digital and analog beamforming. The bottoms of the sub-channel mode in the water-filling algorithm, which are conventionally uncontrollable, are proven to be independently adjustable by RISs. Moreover, the transmit power required for realizing multi-stream transmission is derived. Numerical results are presented to verify our theoretical analysis and exhibit substantial gains over systems without RISs.

cs.IT↗

arXiv2023

A Novel Channel Model for Reconfigurable Intelligent Surfaces with Consideration of Polarization and Switch Impairments

Future wireless networks require the ability to actively adjust the wireless environment to meet strict performance indicators. Reconfigurable Intelligent Surface (RIS) technology is gaining attention for its advantages of low power consumption, cost-effectiveness, and ease of deployment. However, existing channel models for RIS often ignore important properties, such as the impairment in the RIS's switch component and the polarization efficiency among antennas, limiting their practical use. In this paper, we propose a new channel model for RIS that considers these ignored properties, including the reflected field, scattered field, and antenna resonant mode. We verify the proposed model through the practical implementation of a 4 x 4 RIS array with patch antennas in the 3.5 GHz band, using a phase shifter as the switch component of a RIS element. The equivalent model of the phase shifter is also formulated and incorporated into the channel model. We propose a blind controlling algorithm to discuss the properties of our channel model and emphasize the importance of considering polarization and tracking mechanisms for the controlling algorithm. Our channel model is an improvement over existing models and can be used in the practical design of RIS technology. The proposed algorithm provides a practical approach to controlling the wireless environment, suitable for various wireless applications.

cs.IT↗

arXiv2022

Multi-domain Cooperative SLAM: The Enabler for Integrated Sensing and Communications

Simultaneous localization and mapping (SLAM) provides user tracking and environmental mapping capabilities, enabling communication systems to gain situational awareness. Advanced communication networks with ultra-wideband, multiple antennas, and a large number of connections present opportunities for deep integration of sensing and communications. First, the development of integrated sensing and communications (ISAC) is reviewed in this study, and the differences between ISAC and traditional communication are revealed. Then, efficient mechanisms for multi-domain collaborative SLAM are presented. In particular, research opportunities and challenges for cross-sensing, cross-user, cross-frequency, and cross-device SLAM mechanisms are proposed. In addition, SLAM-aided communication strategies are explicitly discussed. We prove that the multi-domain cooperative SLAM mechanisms based on hybrid sensing and crowdsourcing can considerably improve the accuracy of localization and mapping in complex multipath propagation environments through numerical analysis. Furthermore, we conduct testbed experiments to show that the proposed SLAM mechanisms can achieve decimeter-level localization and mapping accuracy in practical scenarios, thereby proving the application prospect of multi-domain collaborative SLAM in ISAC.

cs.IT↗

arXiv2022

Wireless Semantic Transmission via Revising Modules in Conventional Communications

Semantic communication has become a popular research area due its high spectrum efficiency and error-correction performance. Some studies use deep learning to extract semantic features, which usually form end-to-end semantic communication systems and are hard to address the varying wireless environments. Therefore, the novel semantic-based coding methods and performance metrics have been investigated and the designed semantic systems consist of various modules as in the conventional communications but with improved functions. This article discusses recent achievements in the state-of-art semantic communications exploiting the conventional modules in wireless systems. We demonstrate through two examples that the traditional hybrid automatic repeat request and modulation methods can be redesigned for novel semantic coding and metrics to further improve the performance of wireless semantic communications. At the end of this article, some open issues are identified.

eess.SP↗

arXiv2022

AI for CSI Feedback Enhancement in 5G-Advanced

The 3rd Generation Partnership Project started the study of Release 18 in 2021. Artificial intelligence (AI)-native air interface is one of the key features of Release 18, where AI for channel state information (CSI) feedback enhancement is selected as the representative use case. This article provides an overview of AI for CSI feedback enhancement in 5G-Advanced. Several representative non-AI and AI-enabled CSI feedback frameworks are first introduced and compared. Then, the standardization of AI for CSI feedback enhancement in 5G-advanced is presented in detail. First, the scope of the AI for CSI feedback enhancement in 5G-Advanced is presented and discussed. Then, the main challenges and open problems in the standardization of AI for CSI feedback enhancement, especially focusing on performance evaluation and the design of new protocols for AI-enabled CSI feedback, are identified and discussed. This article provides a guideline for the standardization study of AI-based CSI feedback enhancement.

cs.IT↗

arXiv2022

Overview of Deep Learning-based CSI Feedback in Massive MIMO Systems

Many performance gains achieved by massive multiple-input and multiple-output depend on the accuracy of the downlink channel state information (CSI) at the transmitter (base station), which is usually obtained by estimating at the receiver (user terminal) and feeding back to the transmitter. The overhead of CSI feedback occupies substantial uplink bandwidth resources, especially when the number of the transmit antennas is large. Deep learning (DL)-based CSI feedback refers to CSI compression and reconstruction by a DL-based autoencoder and can greatly reduce feedback overhead. In this paper, a comprehensive overview of state-of-the-art research on this topic is provided, beginning with basic DL concepts widely used in CSI feedback and then categorizing and describing some existing DL-based feedback works. The focus is on novel neural network architectures and utilization of communication expert knowledge to improve CSI feedback accuracy. Works on bit-level CSI feedback and joint design of CSI feedback with other communication modules are also introduced, and some practical issues, including training dataset collection, online training, complexity, generalization, and standardization effect, are discussed. At the end of the paper, some challenges and potential research directions associated with DL-based CSI feedback in future wireless communication systems are identified.

eess.SP↗

arXiv2022

Model-Driven Deep Learning-Based MIMO-OFDM Detector: Design, Simulation, and Experimental Results

Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM), a fundamental transmission scheme, promises high throughput and robustness against multipath fading. However, these benefits rely on the efficient detection strategy at the receiver and come at the expense of the extra bandwidth consumed by the cyclic prefix (CP). We use the iterative orthogonal approximate message passing (OAMP) algorithm in this paper as the prototype of the detector because of its remarkable potential for interference suppression. However, OAMP is computationally expensive for the matrix inversion per iteration. We replace the matrix inversion with the conjugate gradient (CG) method to reduce the complexity of OAMP. We further unfold the CG-based OAMP algorithm into a network and tune the critical parameters through deep learning (DL) to enhance detection performance. Simulation results and complexity analysis show that the proposed scheme has significant gain over other iterative detection methods and exhibits comparable performance to the state-of-the-art DL-based detector at a reduced computational cost. Furthermore, we design a highly efficient CP-free MIMO-OFDM receiver architecture to remove the CP overhead. This architecture first eliminates the intersymbol interference by buffering the previously recovered data and then detects the signal using the proposed detector. Numerical experiments demonstrate that the designed receiver offers a higher spectral efficiency than traditional receivers. Finally, over-the-air tests verify the effectiveness and robustness of the proposed scheme in realistic environments.

cs.IT↗

arXiv2022

Wireless Semantic Communications for Video Conferencing

Video conferencing has become a popular mode of meeting even if it consumes considerable communication resources. Conventional video compression causes resolution reduction under limited bandwidth. Semantic video conferencing maintains high resolution by transmitting some keypoints to represent motions because the background is almost static, and the speakers do not change often. However, the study on the impact of the transmission errors on keypoints is limited. In this paper, we initially establish a basal semantic video conferencing (SVC) network, which dramatically reduces transmission resources while only losing detailed expressions. The transmission errors in SVC only lead to a changed expression, whereas those in the conventional methods destroy pixels directly. However, the conventional error detector, such as the cyclic redundancy check, cannot reflect the degree of expression changes. To overcome this issue, we develop an incremental redundancy hybrid automatic repeat-request (IR-HARQ) framework for the varying channels (SVC-HARQ) incorporating a novel semantic error detector. The SVC-HARQ has flexibility in bit consumption and achieves good performance. In addition, SVC-CSI is designed for channel state information (CSI) feedback to allocate the keypoint transmission and enhance the performance dramatically. Simulation shows that the proposed wireless semantic communication system can significantly improve the transmission efficiency.This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

eess.IV↗

arXiv2022

Hybrid Active and Passive Sensing for SLAM in Wireless Communication Systems

Integrating sensing functions into future mobile equipment has become an important trend. Realizing different types of sensing and achieving mutual enhancement under the existing communication hardware architecture is a crucial challenge in realizing the deep integration of sensing and communication. In the 5G New Radio context, active sensing can be performed through uplink beam sweeping on the user equipment (UE) side to observe the surrounding environment. In addition, the UE can perform passive sensing through downlink channel estimation to measure the multipath component (MPC) information. This study is the first to develop a hybrid simultaneous localization and mapping (SLAM) mechanism that combines active and passive sensing, in which mutual enhancement between the two sensing modes is realized in communication systems. Specifically, we first establish a common feature associated with the reflective surface to bridge active and passive sensing, thus enabling information fusion. Based on the common feature, we can attain physical anchor initialization through MPC with the assistance of active sensing. Then, we extend the classic probabilistic data association SLAM mechanism to achieve UE localization and continuously refine the physical anchor and target reflections through the subsequent passive sensing. Numerical results show that the proposed hybrid active and passive sensing-based SLAM mechanism can work successfully in tricky scenarios without any prior information on the floor plan, anchors, or agents. Moreover, the proposed algorithm demonstrates significant performance gains compared with active or passive sensing only mechanisms.

cs.IT↗

arXiv2021

AI-Aided Online Adaptive OFDM Receiver: Design and Experimental Results

Orthogonal frequency division multiplexing (OFDM) has been widely applied in current communication systems. The artificial intelligence (AI)-aided OFDM receivers are currently brought to the forefront to replace and improve the traditional OFDM receivers. In this study, we first compare two AI-aided OFDM receivers, namely, data-driven fully connected deep neural network and model-driven ComNet, through extensive simulation and real-time video transmission using a 5G rapid prototyping system for an over-the-air (OTA) test. We find a performance gap between the simulation and the OTA test caused by the discrepancy between the channel model for offline training and the real environment. We develop a novel online training system, which is called SwitchNet receiver, to address this issue. This receiver has a flexible and extendable architecture and can adapt to real channels by training only several parameters online. From the OTA test, the AI-aided OFDM receivers, especially the SwitchNet receiver, are robust to real environments and promising for future communication systems. We discuss potential challenges and future research inspired by our initial study in this paper.

eess.SP↗

arXiv2021

A Linear Bayesian Learning Receiver Scheme for Massive MIMO Systems

Much stringent reliability and processing latency requirements in ultra-reliable-low-latency-communication (URLLC) traffic make the design of linear massive multiple-input-multiple-output (M-MIMO) receivers becomes very challenging. Recently, Bayesian concept has been used to increase the detection reliability in minimum-mean-square-error (MMSE) linear receivers. However, the latency processing time is a major concern due to the exponential complexity of matrix inversion operations in MMSE schemes. This paper proposes an iterative M-MIMO receiver that is developed by using a Bayesian concept and a parallel interference cancellation (PIC) scheme, referred to as a linear Bayesian learning (LBL) receiver. PIC has a linear complexity as it uses a combination of maximum ratio combining (MRC) and decision statistic combining (DSC) schemes to avoid matrix inversion operations. Simulation results show that the bit-error-rate (BER) and latency processing performances of the proposed receiver outperform the ones of MMSE and best Bayesian-based receivers by minimum $2$ dB and $19$ times for various M-MIMO system configurations.

cs.IT↗

arXiv2021

A Bayesian Receiver with Improved Complexity-Reliability Trade-off in Massive MIMO Systems

The stringent requirements on reliability and processing delay in the fifth-generation ($5$G) cellular networks introduce considerable challenges in the design of massive multiple-input-multiple-output (M-MIMO) receivers. The two main components of an M-MIMO receiver are a detector and a decoder. To improve the trade-off between reliability and complexity, a Bayesian concept has been considered as a promising approach that enhances classical detectors, e.g. minimum-mean-square-error detector. This work proposes an iterative M-MIMO detector based on a Bayesian framework, a parallel interference cancellation scheme, and a decision statistics combining concept. We then develop a high performance M-MIMO receiver, integrating the proposed detector with a low complexity sequential decoding for polar codes. Simulation results of the proposed detector show a significant performance gain compared to other low complexity detectors. Furthermore, the proposed M-MIMO receiver with sequential decoding ensures one order magnitude lower complexity compared to a receiver with stack successive cancellation decoding for polar codes from the 5G New Radio standard.

cs.IT↗

arXiv2021

Phase Retrieval using Expectation Consistent Signal Recovery Algorithm based on Hypernetwork

Phase retrieval (PR) is an important component in modern computational imaging systems. Many algorithms have been developed over the past half-century. Recent advances in deep learning have introduced new possibilities for a robust and fast PR. An emerging technique called deep unfolding provides a systematic connection between conventional model-based iterative algorithms and modern data-based deep learning. Unfolded algorithms, which are powered by data learning, have shown remarkable performance and convergence speed improvement over original algorithms. Despite their potential, most existing unfolded algorithms are strictly confined to a fixed number of iterations when layer-dependent parameters are used. In this study, we develop a novel framework for deep unfolding to overcome existing limitations. Our development is based on an unfolded generalized expectation consistent signal recovery (GEC-SR) algorithm, wherein damping factors are left for data-driven learning. In particular, we introduce a hypernetwork to generate the damping factors for GEC-SR. Instead of learning a set of optimal damping factors directly, the hypernetwork learns how to generate the optimal damping factors according to the clinical settings, thereby ensuring its adaptivity to different scenarios. To enable the hypernetwork to adapt to varying layer numbers, we use a recurrent architecture to develop a dynamic hypernetwork that generates a damping factor that can vary online across layers. We also exploit a self-attention mechanism to enhance the robustness of the hypernetwork. Extensive experiments show that the proposed algorithm outperforms existing ones in terms of convergence speed and accuracy and still works well under very harsh settings, even under which many classical PR algorithms are unstable.

cs.LG↗

arXiv2021

Labeling Multipath via Reconfigurable Intelligent Surface

Reconfigurable intelligent surface (RIS) has shown promise in providing apparent benefits in wireless communication and positioning. Most of the existing research focuses on the ability of RIS to adjust the direction of propagation. In this paper, we present another application based on RIS, named multipath labeling, which intends to inject a label on propagation paths through the RISs. Each labeled path contains spatial knowledge between the RIS and the receiver, thus opening the door for sensing the surrounding world by RISs. The critical challenge is how the labeled paths can be extracted and distinguish from other paths, especially with multipath effects. To address this challenge, we present a complete labeling procedure consisting of channel flipping, parameter extraction, and RIS association. Simulations under a practice ray-tracing model reveal the feasibility of the proposed labeling technique even under the sub 6GHz channels with severe multipath effect. We also apply the multipath labeling technique to localization, which assists user equipment in obtaining its precise location through only a single base station.

cs.IT↗