arXiv subjects

Chaoyu Chen

Publications and source records attributed to Chaoyu Chen.

At least 73 records · Page 4Linked to original sources

arXiv2019

Dimensional crossover and topological nature of the thin films of a three-dimensional topological insulator by band gap engineering

Identification and control of topological phases in topological thin films offer great opportunity for fundamental research and the fabrication of topology-based devices. Here, combining molecular beam epitaxy, angle-resolved photoemission spectroscopy and ab-initio calculations, we investigate the electronic structure evolution in (Bi1-xInx)2Se3 films with thickness from 2 to 13 quintuple layers. We identify several phases with their characteristic topological nature and evolution between them, i.e., dimensional crossover from a three-dimensional topological insulator with gapless surface state to its two-dimensional counterpart with gapped surface state, and topological phase transition from topological insulator to a normal semiconductor with increasing In concentration x. Furthermore, by introducing In alloying as an external knob of band gap engineering, we experimentally demonstrated the trivial topological nature of Bi2Se3 thin films (below 6 quintuple layers) as two-dimensional gapped systems, in consistent with our theoretical calculations. Our results provide not only a comprehensive phase diagram of (Bi1-xInx)2Se3 and a route to control its phase evolution, but also a practical way to experimentally determine the topological properties of a gapped compound by topological phase transition and band gap engineering.

cond-mat.mtrl-sci↗

arXiv2019

Nano-mosaic of Topological Dirac States on the Surface of Pb5Bi24Se41 Observed by Nano-ARPES

We have performed scanning angle-resolved photoemission spectroscopy with a nanometer-sized beam spot (nano-ARPES) on the cleaved surface of Pb5Bi24Se41, which is a member of the (PbSe)5(Bi2Se3)3m homologous series (PSBS) with m = 4 consisting of alternate stacking of the topologically-trivial insulator PbSe bilayer and four quintuple layers (QLs) of the topological insulator Bi2Se3. This allows us to visualize a mosaic of topological Dirac states at a nanometer scale coming from the variable thickness of the Bi2Se3 nano-islands (1-3 QLs) that remain on top of the PbSe layer after cleaving the PSBS crystal, because the local band structure of topological origin changes drastically with the thickness of the Bi2Se3 nano-islands. A comparison of the local band structure with that in ultrathin Bi2Se3 films on Si(111) gives us further insights into the nature of the observed topological states. This result demonstrates that nano-ARPES is a very useful tool for characterizing topological heterostructures.

cond-mat.mes-hall↗

arXiv2019

Nanospot Angle-Resolved Photoemission Study of Bernal-Stacked Bilayer Graphene on Hexagonal Boron Nitride: Band Structure and Local Variation of Lattice Alignment

Hexagonal boron nitride (hBN) is the supporting substrate of choice for two-dimensional material devices because it is atomically flat and chemically inert. However, due to the small size of mechanically exfoliated hBN flakes, electronic structure studies of 2D materials supported by hBN using angle-resolved photoemission spectroscopy (ARPES) are challenging. Here we investigate the electronic band structure of a Bernal-stacked bilayer graphene sheet on a hexagonal boron nitride (BLG/hBN) flake using nanospot ARPES (nanoARPES). By fitting high-resolution energy vs. momentum electronic band spectra, we extract the tight-binding parameters for BLG on hBN. In addition, we reveal spatial variations of the alignment angle between BLG and hBN lattices via inhomogeneity of the electronic bands near the Fermi level. We confirmed these findings by scanning tunneling microscopy measurements obtained on the same device. Our results from spatially resolved nanoARPES measurements of BLG/hBN heterostructures are instrumental for understanding experiments that utilize spatially averaging techniques such as electronic transport and optical spectroscopy.

cond-mat.mtrl-sci↗

arXiv2018

Quasicrystalline 30° Twisted Bilayer Graphene as an Incommensurate Superlattice with Strong Interlayer Coupling

The interlayer coupling can be used to engineer the electronic structure of van der Waals heterostructures (superlattices) to obtain properties that are not possible in a single material. So far research in heterostructures has been focused on commensurate superlattices with a long-ranged Moiré period. Incommensurate heterostructures with rotational symmetry but not translational symmetry (in analogy to quasicrystals) are not only rare in nature, but also the interlayer interaction has often been assumed to be negligible due to the lack of phase coherence. Here we report the successful growth of quasicrystalline 30° twisted bilayer graphene (30°-tBLG) which is stabilized by the Pt(111) substrate, and reveal its electronic structure. The 30°-tBLG is confirmed by low energy electron diffraction and the intervalley double-resonance Raman mode at 1383 cm$^{-1}$. Moreover, the emergence of mirrored Dirac cones inside the Brillouin zone of each graphene layer and a gap opening at the zone boundary suggest that these two graphene layers are coupled via a generalized Umklapp scattering mechanism, i.e. scattering of Dirac cone in one graphene layer by the reciprocal lattice vector of the other graphene layer. Our work highlights the important role of interlayer coupling in incommensurate quasicrystalline superlattices, thereby extending band structure engineering to incommensurate superstructures.

cond-mat.mtrl-sci↗

arXiv2018

Black Arsenic: A Layered Semiconductor with Extreme in-plane Anisotropy

Two-dimensional (2D) layered materials emerge in recent years as a new platform to host novel electronic, optical or excitonic physics and develop unprecedented nanoelectronic and energy applications. By definition, these materials are strongly anisotropic between within the basal plane and cross the plane. The structural and property anisotropies inside their basal plane, however, are much less investigated. Herein, we report a rare chemical form of arsenic, called black-arsenic (b-As), as an extremely anisotropic layered semiconductor. We have performed systematic characterization on the structural, electronic, thermal and electrical properties of b-As single crystals, with particular focus on its anisotropies along two in-plane principle axes, armchair (AC) and zigzag (ZZ). Our analysis shows that b-As exhibits higher or comparable electronic, thermal and electric transport anisotropies between the AC and ZZ directions than any other known 2D crystals. Such extreme in-plane anisotropies are able to potentially implement novel ideas for scientific research and device applications.

cond-mat.mtrl-sci↗

arXiv2017

Temperature-Driven Topological Transition in 1T'-MoTe2

The topology of Weyl semimetals requires the existence of unique surface states. Surface states have been visualized in spectroscopy measurements, but their connection to the topological character of the material remains largely unexplored. 1T'-MoTe2, presents a unique opportunity to study this connection. This material undergoes a phase transition at 240K that changes the structure from orthorhombic (putative Weyl semimetal) to monoclinic (trivial metal), while largely maintaining its bulk electronic structure. Here we show from temperature-dependent quasiparticle interference measurements that this structural transition also acts as a topological switch for surface states in 1T'-MoTe2. At low temperature, we observe strong quasiparticle scattering, consistent with theoretical predictions and photoemission measurements for the surface states in this material. In contrast, measurements performed at room temperature show the complete absence of the scattering wavevectors associated with the trivial surface states. These distinct quasiparticle scattering behaviors show that 1T'-MoTe2 is ideal for separating topological and trivial electronic phenomena via temperature dependent measurements.

cond-mat.mtrl-sci↗

arXiv2017

Emergence of Frohlich polaron from interlayer electron-phonon coupling in van der Waals heterostructure

Van der Waals heterostructures, vertical stacks of layered materials, offer newopportunities for novel quantum phenomena which are absent in their constituent components. Here we report the emergence of polaron quasiparticles at the interface of graphene/hexagonal boron nitride (h-BN) heterostructures. Using nanospot angle-resolved photoemission spectroscopy, we observe zone-corner replicas of h-BN valence band maxima, with energy spacing coincident with the highest phonon energy of the heterostructure|an indication of Frohlich polaron formation due to forward scattering electron-phonon coupling. Parabolic fitting of the h-BN bands yields an effective mass enhancement of ~ 2.3, suggesting an intermediate coupling strength. Our theoretical simulations based on Migdal-Eliashberg theory corroborate the experimental results, allowing the extraction of microscopic physical parameters. Moreover,renormalisation of graphene $π$ band is observed due to the hybridisation with the h-BN band. Our work generalises the polaron study from transition metal oxides to Van derWaals heterostructures with higher material exibility, highlighting interlayer coupling as an extra degree of freedom to explore emergent phenomena.

cond-mat.mes-hall↗

arXiv2017

Electronic bandstructure of ReS2 by high resolution angle resolved photoemission spectroscopy

The rhenium-based transition metal dichalcogenides (TMDs) are atypical of the TMD family due to their highly anisotropic crystalline structure and are recognized as promising materials for two dimensional heterostructure devices. The nature of the band gap (direct or indirect) for bulk, few and single layer forms of ReS$_2$ is of particular interest, due to its comparatively weak inter-planar interaction. However, the degree of inter-layer interaction and the question of whether a transition from indirect to direct gap is observed on reducing thickness (as in other TMDs) are controversial. We present a direct determination of the valence band structure of bulk ReS$_2$ using high resolution angle resolved photoemission spectroscopy (ARPES). We find a clear in-plane anisotropy due to the presence of chains of Re atoms, with a strongly directional effective mass which is larger in the direction orthogonal to the Re chains (2.2 $m_e$) than along them (1.6 $m_e$), in good agreement with density functional theory calculations. An appreciable inter-plane interaction results in an experimentally-measured difference of ~100-200 meV between the valence band maxima at the Z point (0,0,1/2) and the $Γ$ point (0,0,0) of the three-dimensional Brillouin zone. This leads to a direct gap at Z and a close-lying but larger gap at $Γ$, implying that bulk ReS2 is marginally indirect. This may account for recent conflicting transport and photoluminescence measurements and the resulting uncertainty about the direct or indirect gap nature of this material.

cond-mat.mtrl-sci↗

arXiv2017

Electronic bandstructure and van der Waals coupling of ReSe2 revealed by high-resolution angle-resolved photoemission spectroscopy

ReSe2 and ReS2 are unusual compounds amongst the layered transition metal dichalcogenides as a result of their low symmetry, with a characteristic in-plane anisotropy due to in-plane rhenium chains. They preserve inversion symmetry independent of the number of layers and, in contrast to more well-known transition metal dichalcogenides, bulk and few-monolayer Re-TMD compounds have been proposed to behave as electronically and vibrational decoupled layers. Here, we probe for the first time the electronic band structure of bulk ReSe2 by direct nanoscale angle-resolved photoemission spectroscopy. We find a highly anisotropic in- and out-of-plane electronic structure, with the valence band maxima located away from any particular high-symmetry direction. The effective mass doubles its value perpendicular to the Re chains and the interlayer van der Waals coupling generates significant electronic dispersion normal to the layers. Our density functional theory calculations, including spin-orbit effects, are in excellent agreement with these experimental findings.

cond-mat.mes-hall↗

arXiv2017

A novel artificial condensed matter lattice and a new platform for one-dimensional topological phases

Engineered lattices in condensed matter physics, such as cold atom optical lattices or photonic crystals, can have fundamentally different properties from naturally-occurring electronic crystals. Here, we report a novel type of artificial quantum matter lattice. Our lattice is a multilayer heterostructure built from alternating thin films of topological and trivial insulators. Each interface within the heterostructure hosts a set of topologically-protected interface states, and by making the layers sufficiently thin, we demonstrate for the first time a hybridization of interface states across layers. In this way, our heterostructure forms an emergent atomic chain, where the interfaces act as lattice sites and the interface states act as atomic orbitals, as seen from our measurements by angle-resolved photoemission spectroscopy (ARPES). By changing the composition of the heterostructure, we can directly control hopping between lattice sites. We realize a topological and a trivial phase in our superlattice band structure. We argue that the superlattice may be characterized in a significant way by a one-dimensional topological invariant, closely related to the invariant of the Su-Schrieffer-Heeger model. Our topological insulator heterostructure demonstrates a novel experimental platform where we can engineer band structures by directly controlling how electrons hop between lattice sites.

cond-mat.mtrl-sci↗

arXiv2017

Stacking-dependent electronic structure of trilayer graphene resolved by nanospot angle-resolved photoemission spectroscopy

The crystallographic stacking order in multilayer graphene plays an important role in determining its electronic structure. In trilayer graphene, rhombohedral stacking (ABC) is particularly intriguing, exhibiting a flat band with an electric-field tunable band gap. Such electronic structure is distinct from simple hexagonal stacking (AAA) or typical Bernal stacking (ABA), and is promising for nanoscale electronics, optoelectronics applications. So far clean experimental electronic spectra on the first two stackings are missing because the samples are usually too small in size (um or nm scale) to be resolved by conventional angle-resolved photoemission spectroscopy (ARPES). Here by using ARPES with nanospot beam size (NanoARPES), we provide direct experimental evidence for the coexistence of three different stackings of trilayer graphene and reveal their distinctive electronic structures directly. By fitting the experimental data, we provide important experimental band parameters for describing the electronic structure of trilayer graphene with different stackings.

cond-mat.mtrl-sci↗

arXiv2017

Angle resolved photoemission spectroscopy reveals spin charge separation in metallic MoSe2 grain boundary

Material line defects are one-dimensional structures but the search and proof of electron behaviour consistent with the reduced dimension of such defects has been so far unsuccessful. Here we show using angle resolved photoemission spectroscopy that twin-grain boundaries in the layered semiconductor MoSe2 exhibit parabolic metallic bands. The one-dimensional nature is evident from a charge density wave transition, whose periodicity is given by kF/π, consistent with scanning tunneling microscopy and angle resolved photoemission measurements. Most importantly, we provide evidence for spin- and charge-separation, the hallmark of one-dimensional quantum liquids. Our studies show that the spectral line splits into distinctive spinon and holon excitations whose dispersions exactly follow the energy-momentum dependence calculated by a Hubbard model with suitable finite-range interactions. Our results also imply that quantum wires and junctions can be isolated in line defects of other transition metal dichalcogenides, which may enable quantum transport measurements and devices.

cond-mat.str-el↗

arXiv2017

Electronic structure of transferred graphene/h-BN van der Waals heterostructures with nonzero stacking angles by nano-ARPES

In van der Waals heterostructures, the periodic potential from the Moiré superlattice can be used as a control knob to modulate the electronic structure of the constituent materials. Here we present a nanoscale angle-resolved photoemission spectroscopy (Nano-ARPES) study of transferred graphene/h-BN heterostructures with two different stacking angles of 2.4° and 4.3° respectively. Our measurements reveal six replicas of graphene Dirac cones at the superlattice Brillouin zone (SBZ) centers. The size of the SBZ and its relative rotation angle to the graphene BZ are in good agreement with Moiré superlattice period extracted from atomic force microscopy (AFM) measurements. Comparison to epitaxial graphene/h-BN with 0° stacking angles suggests that the interaction between graphene and h-BN decreases with increasing stacking angle.

cond-mat.mtrl-sci↗

arXiv2015

Experimental Observation of Two Massless Dirac-Fermion Gases in Graphene-Topological Insulator Heterostructure

Graphene and topological insulators (TI) possess two-dimensional Dirac fermions with distinct physical properties. Integrating these two Dirac materials in a single device creates interesting opportunities for exploring new physics of interacting massless Dirac fermions. Here we report on a practical route to experimental fabrication of graphene-Sb2Te3 heterostructure. The graphene-TI heterostructures are prepared by using a dry transfer of chemical-vapor-deposition grown graphene film. ARPES measurements confirm the coexistence of topological surface states of Sb2Te3 and Dirac π bands of graphene, and identify the twist angle in the graphene-TI heterostructure. The results suggest a potential tunable electronic platform in which two different Dirac low-energy states dominate the transport behavior.

cond-mat.mes-hall↗

arXiv2015

Electronic Structure of Transition Metal Dichalcogenides PdTe2 and Cu0.05PdTe2 Superconductors Obtained by Angle-Resolved Photoemission Spectroscopy

The layered transition metal chalcogenides have been a fertile land in solid state physics for many decades. Various MX2-type transition metal dichalcogenides, such as WTe2, IrTe2, and MoS2, have triggered great attention recently, either for the discovery of novel phenomena or some extreme or exotic physical properties, or for their potential applications. PdTe2 is a superconductor in the class of transition metal dichalcogenides, and superconductivity is enhanced in its Cu-intercalated form, Cu0.05PdTe2. It is important to study the electronic structures of PdTe2 and its intercalated form in order to explore for new phenomena and physical properties and understand the related superconductivity enhancement mechanism. Here we report systematic high resolution angle-resolved photoemission (ARPES) studies on PdTe2 and Cu0.05$PdTe2 single crystals, combined with the band structure calculations. We present for the first time in detail the complex multi-band Fermi surface topology and densely-arranged band structure of these compounds. By carefully examining the electronic structures of the two systems, we find that Cu-intercalation in PdTe2 results in electron-doping, which causes the band structure to shift downwards by nearly 16 meV in Cu0.05PdTe2. Our results lay a foundation for further exploration and investigation on PdTe2 and related superconductors.

cond-mat.supr-con↗

arXiv2015

Anomalous High-Energy Waterfall-Like Electronic Structure in 5d Transition Metal Oxide Sr2IrO4 with a Strong Spin-Orbit Coupling

The layered 5d transition metal oxides like Sr2IrO4 have attracted significant interest recently due to a number of exotic and new phenomena induced by the interplay between the spin-orbit coupling, bandwidth W and on-site Coulomb correlation U. In contrast to a metallic behavior expected from the Mott-Hubbard model due to more spatially extended 5d orbitals and moderate U, an insulating ground state has been observed in Sr2IrO4. Such an insulating behavior can be understood by an effective J_eff=1/2 Mott insulator model by incorporating both electron correlation and strong spin-orbital coupling, although its validity remains under debate at present. In particular, Sr2IrO4 exhibits a number of similarities to the high temperature cuprate superconductors in the crystal structure, electronic structure, magnetic structure, and even possible high temperature superconductivity. Here we report a new observation of the anomalous high energy electronic structure in Sr2IrO4. By taking high-resolution angle-resolved photoemission measurements on Sr2IrO4 over a wide energy range, we have revealed that the high energy electronic structures show unusual nearly-vertical bands that extend over a large energy range. Such anomalous high energy behaviors resemble the high energy waterfall features observed in the cuprate superconductors, adding one more important similarity between these two systems. While strong electron correlation plays an important role in producing high energy waterfall features in the cuprate superconductors, the revelation of the high energy anomalies in Sr2IrO4 points to a novel route in generating exotic electronic excitations from the strong spin-orbit coupling and a moderate electron correlation.

cond-mat.str-el↗

arXiv2014

Orbital-Selective Spin Texture and its Manipulation in a Topological Insulator

Topological insulators represent a new quantum state of matter that are insulating in the bulk but metallic on the edge or surface. In the Dirac surface state, it is well-established that the electron spin is locked with the crystal momentum. Here we report a new phenomenon of the spin texture locking with the orbital texture in a topological insulator Bi2Se3. We observe light-polarization-dependent spin texture of both the upper and lower Dirac cones that constitutes strong evidence of the orbital-dependent spin texture in Bi2Se3. The different spin texture detected in variable polarization geometry is the manifestation of the spin-orbital texture in the initial state combined with the photoemission matrix element effects. Our observations provide a new orbital degree of freedom and a new way of light manipulation in controlling the spin structure of the topological insulators that are important for their future applications in spin-related technologies.

cond-mat.mes-hall↗

arXiv2014

Strong Anisotropy of Dirac Cone in SrMnBi2 and CaMnBi2 Revealed by Angle-Resolved Photoemission Spectroscopy

The Dirac materials, such as graphene and three-dimensional topological insulators, have attracted much attention because they exhibit novel quantum phenomena with their low energy electrons governed by the relativistic Dirac equations. One particular interest is to generate Dirac cone anisotropy so that the electrons can propagate differently from one direction to the other, creating an additional tunability for new properties and applications. While various theoretical approaches have been proposed to make the isotropic Dirac cones of graphene into anisotropic ones, it has not yet been met with success. There are also some theoretical predictions and/or experimental indications of anisotropic Dirac cone in novel topological insulators and AMnBi2 (A=Sr and Ca) but more experimental investigations are needed. Here we report systematic high resolution angle-resolved photoemission measurements that have provided direct evidence on the existence of strongly anisotropic Dirac cones in SrMnBi2 and CaMnBi2. Distinct behaviors of the Dirac cones between SrMnBi2 and CaMnBi2 are also observed. These results have provided important information on the strong anisotropy of the Dirac cones in AMnBi2 system that can be governed by the spin-orbital coupling and the local environment surrounding the Bi square net.

cond-mat.str-el↗