Searcharxiv⌕ Search

arXiv subjects

Charles A. McLemore

Publications and source records attributed to Charles A. McLemore.

11 recordsLinked to original sources
arXiv2026

Redefining the limits of real-time noise cancellation in optical fiber links

A broad and growing array of applications rely on the faithful transmission of ultrastable optical signals over noisy paths, requiring cancellation of environmentally induced noise. A generally accepted limit constrains how well the path length noise can be suppressed in real time. Here, we show that this standard limit is not fundamental and can be improved upon. By considering the temporal correlations between the round-trip and one-way signals, we develop a new framework for optimizing the noise cancellation feedback signal for any spatial distribution of noise along the signal path. We use this framework to surpass the standard limit in two sets of experiments. First, we demonstrate noise cancellation in a deployed urban optical fiber, where we achieve noise suppression approximately 6 dB beyond the standard limit. Then, in a reconfigurable lab-based fiber-optic testbed, we show that, for certain spatial distributions of noise, suppression of well over 10 dB beyond the standard limit is readily achievable. With the use of digital signal processing to generate the correction signal, our new technique requires no new electro-optic hardware relative to the field-standard noise cancellation scheme. This will allow for widespread adoption of these improved limits in existing systems, with applications in optical clock distribution, optical clock comparisons for fundamental physics and geodesy, and quantum networking.

physics.optics↗
arXiv2026

Fiber Link Stabilization with a Multicore Fiber Amplifier

We study the use of separate cores of a multicore erbium-doped fiber amplifier (MC-EDFA) in a noise-canceled link for ultrastable optical frequency transfer. We demonstrate fractional frequency instability of $5\times10^{-19}$ at 1000 s averaging time for the stabilized MC-EDFA alone and $1.4\times10^{-18}$ at 1000 s averaging time when integrated with a 40 km-long 7-core spooled fiber. This study further establishes multicore fiber (MCF) networks as a promising platform for ultrastable frequency transfer, serving as an important step toward incorporating precision time and frequency distribution into future MCF communication infrastructures.

physics.optics↗
arXiv2025

Dual Laser Self-Injection Locking to a Micro Fabry-Perot for Low Phase Noise Millimeter-wave Generation

Low-noise and accessible millimeter-wave sources are critical for emergent telecommunications, radar and sensing applications. Current limitations to realizing low-noise, deployable millimeter-wave systems include size, weight, and power (SWaP) requirements, along with complex operating principles. In this paper we provide a compact photonic implementation for generating low phase noise millimeter-waves, which significantly simplifies the architecture and reduces the volume compared to alternative approaches. Two commercial diode lasers are self-injection-locked to a micro-Fabry-Perot cavity, and their heterodyne provides low phase noise millimeter waves reaching -148 dBc/Hz at 1 MHz offset on a 111.45 GHz carrier. Phase noise characterization at such levels and frequencies poses unique challenges, and we further highlight the capabilities of optically-based measurement techniques. Our approach to millimeter-wave generation can leverage advances in photonic integration for further miniaturization and packaging, thus providing a unique source of accessible, compact, and low-noise millimeter waves.

physics.optics↗
arXiv2024

Photonic Millimeter-wave Generation Beyond the Cavity Thermal Limit

Next-generation communications, radar and navigation systems will extend and exploit the higher bandwidth of the millimeter-wave domain for increased communication data rates as well as radar with higher sensitivity and increased spatial resolution. However, realizing these advantages will require the generation of millimeter-wave signals with low phase noise in simple and compact form-factors. The rapidly developing field of photonic integration addresses this challenge and provides a path toward simplified and portable, low-noise mm-wave generation for these applications. We leverage these advances by heterodyning two silicon photonic chip lasers, phase-locked to the same miniature Fabry-Perot (F-P) cavity to demonstrate a simple framework for generating low-noise millimeter-waves with phase noise below the thermal limit of the F-P cavity. Specifically, we generate 94.5 GHz and 118.1 GHz millimeter-wave signals with phase noise of -117 dBc/Hz at 10 kHz offset, decreasing to -120 dBc/Hz at 40 kHz offset, a record low value for such photonic devices. We achieve this with existing technologies that can be integrated into a platform less than $\approx$ 10 mL in volume. Our work illustrates the significant potential and advantages of low size, weight, and power (SWaP) photonic-sourced mm-waves for communications and sensing.

physics.optics↗
arXiv2024

Tunable X-band opto-electronic synthesizer with ultralow phase noise

Modern communication, navigation, and radar systems rely on low noise and frequency-agile microwave sources. In this application space, photonic systems provide an attractive alternative to conventional microwave synthesis by leveraging high spectral purity lasers and optical frequency combs to generate microwaves with exceedingly low phase noise. However, these photonic techniques suffer from a lack of frequency tunability, and also have substantial size, weight, and power requirements that largely limit their use to laboratory settings. In this work, we address these shortcomings with a hybrid opto-electronic approach that combines simplified optical frequency division with direct digital synthesis to produce tunable low-phase-noise microwaves across the entire X-band. This results in exceptional phase noise at 10 GHz of -156 dBc/Hz at 10 kHz offset and fractional frequency instability of 1x10^-13 at 0.1 s. Spot tuning away from 10 GHz by 500 MHz, 1 GHz, and 2 GHz, yields phase noise at 10 kHz offset of -150 dBc/Hz, -146 dBc/Hz, and -140 dBc/Hz, respectively. The synthesizer architecture is fully compatible with integrated photonic implementations that will enable a versatile microwave source in a chip-scale package. Together, these advances illustrate an impactful and practical synthesis technique that shares the combined benefits of low timing noise provided by photonics and the frequency agility of established digital synthesis.

physics.optics↗
arXiv2023

Photonic chip-based low noise microwave oscillator

Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are difficult to further reduce in size and power consumption. Our work addresses this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division. Narrow linewidth self-injection locked integrated lasers are stabilized to a miniature Fabry-Pérot cavity, and the frequency gap between the lasers is divided with an efficient dark-soliton frequency comb. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc/Hz at 100 Hz offset frequency that decreases to -135 dBc/Hz at 10 kHz offset--values which are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems.

physics.optics↗
arXiv2023

Compact, Portable, Thermal-Noise-Limited Optical Cavity with Low Acceleration Sensitivity

We develop and demonstrate a compact (less than $6$ mL) portable Fabry-Pérot optical reference cavity. A laser locked to the cavity is thermal noise limited at $2\times10^{-14}$ fractional frequency stability. Broadband feedback control with an electro-optic modulator enables near thermal-noise-limited phase noise performance from $1$ Hz to $10$ kHz offset frequencies. The additional low vibration, temperature, and holding force sensitivity of our design makes it well suited for out-of-the-lab applications such as optically derived low noise microwave generation, compact and mobile optical atomic clocks, and environmental sensing through deployed fiber networks.

physics.optics↗
arXiv2022

Micro-fabricated mirrors with finesse exceeding one million

The Fabry-Pérot resonator is one of the most widely used optical devices, enabling scientific and technological breakthroughs in diverse fields including cavity QED, optical clocks, precision length metrology and spectroscopy. Though resonator designs vary widely, all high-end applications benefit from mirrors with the lowest loss and highest finesse possible. Fabrication of the highest finesse mirrors relies on centuries-old mechanical polishing techniques, which offer losses at the part-per-million (ppm) level. However, no existing fabrication techniques are able to produce high finesse resonators with the large range of mirror geometries needed for scalable quantum devices and next-generation compact atomic clocks. In this paper, we introduce a new and scalable approach to fabricate mirrors with ultrahigh finesse ($\geq 10^{6}$) and user-defined radius of curvature spanning four orders of magnitude ($10^{-4}-10^{0}$ m). We employ photoresist reflow and reactive ion etching to shape and transfer mirror templates onto a substrate while maintaining sub-Angstrom roughness. This substrate is coated with a dielectric stack and used to create arrays of compact Fabry-Pérot resonators with finesse values as high as 1.3 million and measured excess loss $<$ 1 ppm. Optical ringdown measurements of 43 devices across 5 substrates reveal that the fabricated cavity mirrors -- with both small and large radii of curvature -- produce an average coating-limited finesse of 1.05 million. This versatile new approach opens the door to scalable fabrication of high-finesse miniaturized Fabry-Pérot cavities needed for emerging quantum optics and frequency metrology technologies.

physics.optics↗
arXiv2022

Chip-Based Laser with 1 Hertz Integrated Linewidth

Lasers with hertz-level linewidths on timescales up to seconds are critical for precision metrology, timekeeping, and manipulation of quantum systems. Such frequency stability typically relies on bulk-optic lasers and reference cavities, where increased size is leveraged to improve noise performance, but with the trade-off of cost, hand assembly, and limited application environments. On the other hand, planar waveguide lasers and cavities exploit the benefits of CMOS scalability but are fundamentally limited from achieving hertz-level linewidths at longer times by stochastic noise and thermal sensitivity inherent to the waveguide medium. These physical limits have inhibited the development of compact laser systems with frequency noise required for portable optical clocks that have performance well beyond conventional microwave counterparts. In this work, we break this paradigm to demonstrate a compact, high-coherence laser system at 1548 nm with a 1 s integrated linewidth of 1.1 Hz and fractional frequency instability less than 10$^{-14}$ from 1 ms to 1 s. The frequency noise at 1 Hz offset is suppressed by 11 orders of magnitude from that of the free-running diode laser down to the cavity thermal noise limit near 1 Hz$^2$/Hz, decreasing to 10$^{-3}$ Hz$^2$/Hz at 4 kHz offset. This low noise performance leverages wafer-scale integrated lasers together with an 8 mL vacuum-gap cavity that employs micro-fabricated mirrors with sub-angstrom roughness to yield an optical $Q$ of 11.8 billion. Significantly, all the critical components are lithographically defined on planar substrates and hold the potential for parallel high-volume manufacturing. Consequently, this work provides an important advance towards compact lasers with hertz-level linewidths for applications such as portable optical clocks, low-noise RF photonic oscillators, and related communication and navigation systems.

physics.optics↗
arXiv2022

Thermal noise-limited laser stabilization to an 8 mL volume Fabry-Pérot reference cavity with microfabricated mirrors

Lasers stabilized to vacuum-gap Fabry-Pérot optical reference cavities display extraordinarily low noise and high stability, with linewidths much less than 1 Hz. These lasers can expand into new applications and ubiquitous use with the development of compact, portable cavities that are manufacturable at scale. Here we demonstrate an 8 mL volume Fabry-Pérot cavity constructed with mirrors that are fabricated lithographically with finesse near 1 million. A laser locked to the cavity exhibits phase noise limited by the cavity thermal noise for offset frequencies ranging from 1 Hz to $\approx$ 1 kHz, with a fractional frequency stability of 7$\times$10$^{-15}$ at 1 second. Furthermore, the use of microfabricated mirrors allows us to expand the design space of centimeter-scale cavities, and we explore the noise implications of pushing towards cavity volumes of 2 mL or less.

physics.optics↗