arXiv subjects

Charles Baylis

Publications and source records attributed to Charles Baylis.

10 recordsLinked to original sources

arXiv2026

Low-Cost Turntable Designed for RF Phased Array Antenna Active Element Pattern Measurement

Accurate antenna array calibrations and measurements of aspects such as active element pattern (AEP) are critical for enabling integrated sensing and communication (ISAC) technologies such as directional modulation. One reliable way of obtaining accurate and repeatable AEP measurements is to spin the antenna array on a turntable, but many turntables designed for antenna array measurements are prohibitively expensive for small labs and may not be designed with RF considerations, such as cable phase stability, in mind. This paper details the design of a motorized 3D printed turntable for use in directional modulation and in-situ measurement experiments that will allow for rotation of an antenna array around a point, such that the far field of the antenna pattern can be measured by a stationary receiver.

eess.SY↗

arXiv2026

Implementation of a Directional Modulation Testbed for Reconfigurable Transmitters for Spatially Agile MIMO Systems

This paper demonstrates the implementation and validation of a microwave testbed for directionally modulated transmission. Directional modulation enables multiple communication and/or radar signals to be transmitted in multiple directions simultaneously using a single phased array aperture, helping to relieve spectral congestion. A two-element transmitter array is driven by a Xilinx ZCU208 Radio Frequency System on a Chip (RFSoC). Our testbed provides a foundation for developing a fully reconfigurable array transmitter for multi-user multiple-input multiple-output (MU-MIMO) radar and communications, which will incorporate in-situ measurement, reconfigurable matching circuitry, and fast tuning algorithms for frequency and directional selectivity. This testbed enables development and validation of reconfigurable techniques for adaptive spectral and spatial coexistence.

eess.SY↗

arXiv2025

Growing Into an Adaptive and Reconfigurable Paradigm for Spectrum Sharing

A significant movement from rigid use of the wireless spectrum toward adaptive and reconfigurable spectrum use has been prompted by increasing spectral crowding. Some bands have moved to an adaptive sharing model, and proposals are growing for this approach to be applied to additional bands. The process of moving from a fixed, rigid spectrum paradigm to adaptive and reconfigurable use involves maturation of policy and technology at multiple levels within the system of systems. Using the concept of Bloom's Taxonomy from the education discipline, this paper examines the development of a policy and technology progression toward a mature, adaptive and reconfigurable paradigm.

eess.SY↗

arXiv2023

Algorithmic Information Forecastability

The outcome of all time series cannot be forecast, e.g. the flipping of a fair coin. Others, like the repeated {01} sequence {010101...} can be forecast exactly. Algorithmic information theory can provide a measure of forecastability that lies between these extremes. The degree of forecastability is a function of only the data. For prediction (or classification) of labeled data, we propose three categories for forecastability: oracle forecastability for predictions that are always exact, precise forecastability for errors up to a bound, and probabilistic forecastability for any other predictions. Examples are given in each case.

cs.IT↗

arXiv2022

Changepoint Detection for Real-Time Spectrum Sharing Radar

Radar must adapt to changing environments, and we propose changepoint detection as a method to do so. In the world of increasingly congested radio frequencies, radars must adapt to avoid interference. Many radar systems employ the prediction action cycle to proactively determine transmission mode while spectrum sharing. This method constructs and implements a model of the environment to predict unused frequencies, and then transmits in this predicted availability. For these selection strategies, performance is directly reliant on the quality of the underlying environmental models. In order to keep up with a changing environment, these models can employ changepoint detection. Changepoint detection is the identification of sudden changes, or changepoints, in the distribution from which data is drawn. This information allows the models to discard "garbage" data from a previous distribution, which has no relation to the current state of the environment. In this work, bayesian online changepoint detection (BOCD) is applied to the sense and predict algorithm to increase the accuracy of its models and improve its performance. In the context of spectrum sharing, these changepoints represent interferers leaving and entering the spectral environment. The addition of changepoint detection allows for dynamic and robust spectrum sharing even as interference patterns change dramatically. BOCD is especially advantageous because it enables online changepoint detection, allowing models to be updated continuously as data are collected. This strategy can also be applied to many other predictive algorithms that create models in a changing environment.

eess.SY↗

arXiv2022

Dilated POCS: Minimax Convex Optimization

Alternating projection onto convex sets (POCS) provides an iterative procedure to find a signal that satisfies two or more convex constraints when the sets intersect. For nonintersecting constraints, the method of simultaneous projections produces a minimum mean square error (MMSE) solution. In certain cases, a minimax solution is more desirable. Generating a minimax solution is possible using dilated POCS. The minimax solution uses morphological dilation of nonintersecting signal convex constraints. The sets are progressively dilated to the point where there is intersection at a minimax solution. Examples are given contrasting the MMSE and minimax solutions in problems of tomographic reconstruction of images. Dilated POCS adds a new imaging modality for image synthesis. Lastly, morphological erosion of signal sets is suggested as a method to shrink the overlap when sets intersect at more than one point.

eess.IV↗

arXiv2022

In-Situ Assessment of Array Antenna Currents for Real-Time Impedance Tuning

Impedance tuning has shown promise to maximize output power, gain, or efficiency for transmitter amplifier devices in changing frequency or array environments. Using impedance tuning in phased-array elements, however, has a significant and dynamically changing impact on the transmitted array pattern. To assess the impact of impedance tuning operations on the array pattern, this paper presents a simple method to monitor the antenna input current in real time, allowing optimizations that attempt to preserve the array pattern while achieving goals of increased power, gain, or efficiency. The real-time monitoring of current provides many advantages over traditional array calibration methods in situations where the array element chains can change significantly in magnitude and/or phase during operations.

physics.ins-det↗

arXiv2021

Cascade Watchdog: A Multi-tiered Adversarial Guard for Outlier Detection

The identification of out-of-distribution content is critical to the successful implementation of neural networks. Watchdog techniques have been developed to support the detection of these inputs, but the performance can be limited by the amount of available data. Generative adversarial networks have displayed numerous capabilities, including the ability to generate facsimiles with excellent accuracy. This paper presents and empirically evaluates a multi-tiered watchdog, which is developed using GAN generated data, for improved out-of-distribution detection. The cascade watchdog uses adversarial training to increase the amount of available data similar to the out-of-distribution elements that are more difficult to detect. Then, a specialized second guard is added in sequential order. The results show a solid and significant improvement on the detection of the most challenging out-of-distribution inputs while preserving an extremely low false positive rate.

cs.LG↗

arXiv2021

Classification of Common Waveforms Including a Watchdog for Unknown Signals

In this paper, we examine the use of a deep multi-layer perceptron model architecture to classify received signal samples as coming from one of four common waveforms, Single Carrier (SC), Single-Carrier Frequency Division Multiple Access (SC-FDMA), Orthogonal Frequency Division Multiplexing (OFDM), and Linear Frequency Modulation (LFM), used in communication and radar networks. Synchronization of the signals is not needed as we assume there is an unknown and uncompensated time and frequency offset. An autoencoder with a deep CNN architecture is also examined to create a new fifth classification category of an unknown waveform type. This is accomplished by calculating a minimum and maximum threshold values from the root mean square error (RMSE) of the radar and communication waveforms. The classifier and autoencoder work together to monitor a spectrum area to identify the common waveforms inside the area of operation along with detecting unknown waveforms. Results from testing showed the classifier had 100\% classification rate above 0 dB with accuracy of 83.2\% and 94.7\% at -10 dB and -5 dB, respectively, with signal impairments present. Results for the anomaly detector showed 85.3\% accuracy at 0 dB with 100\% at SNR greater than 0 dB with signal impairments present when using a high-value Fast Fourier Transform (FFT) size. Accurate detection rates decline as additional noise is introduced to the signals, with 78.1\% at -5 dB and 56.5\% at -10 dB. However, these low rates seen can be potentially mitigated by using even higher FFT sizes also shown in our results.

eess.SP↗

arXiv2020

Range Improvement in Single-Beam Phased Array Radars by Amplifier Impedance Tuning

Significant radar range degradation can be incurred due to variations in antenna impedance from changing array scan angle. Element-wise reconfigurable impedance tuners can be used to optimally match the power amplifier device; however, the impedance matching can also affect the array pattern. In this paper, the effects of element-wise impedance tuning on the transmitted power and on the array pattern are studied, and an approach is recommended for the element-wise implementation of impedance tuners. Examples of impact on array pattern and transmitted power are given using simulation of a designed switched-stub impedance tuner. As a result of these experiments, guidelines are developed for the creation of real-time circuit optimization techniques in the array elements.

nlin.AO↗