arXiv subjects

Charles Manière

Publications and source records attributed to Charles Manière.

At least 19 recordsLinked to original sources

arXiv2025

Finite Element Prediction of Sintering Deformation in 3D-Printed Porcelain Filament

Sintering of printed porcelain filaments can be strongly affected by overhang geometry, thin features, and printing-induced anisotropy. These effects are particularly difficult to simulate because they require accurately capturing the interplay between sintering kinetics, viscous deformation, and macroscopic anisotropy. In this study, a robust and predictive model is established experimentally using anisotropic sintering dilatometry combined with overhang-deformation calibration through finite element simulations (FEM). The sintering behavior is identified using a porosity-temperature-independent minimization strategy applied to multi-rate dilatometry. Pellet anisotropy is incorporated via FEM by imposing directional sintering stresses. The deformation behavior is then calibrated by adjusting the shear viscosity to match overhang shapes deformation. The resulting model is finally validated on overhanging bar geometries. This step-by-step approach provides a comprehensive assessment of porcelain sintering while accurately capturing deformation mechanisms.

physics.class-ph↗

arXiv2020

Sintering dilatometry based grain growth assessment

Volume shrinkage, grain growth, and their interaction are major events occurring during free sintering of ceramics. A high temperature sintering dilatometry curve is influenced by these both phenomena. It is shown that the continuum theory of sintering can be utilized in the format enabling the extraction of the maximum amount of information on the densification and grain growth kinetics based on a simple dilatometry test. We present here the capability of such a fast approach (Dilatometry based Grain growth Assessment DGA) utilized for the modeling of sintering and grain growth of zirconia.

cond-mat.mtrl-sci↗

arXiv2020

Microwave Sintering of Alumina at 915 MHz: Modeling, Process Control, and Microstructure Distribution

Microwave energy can be advantageously used for materials processing as it provides high heating rates and homogeneous temperature field distribution. These features are partly due to the large microwave penetration depth into dielectric materials which is, at room temperature, a few centimeters in most dielectric materials. However, up to now, this technology is not widely spread for high-temperature materials processing applications (>1200{\textdegree}C), because its reproducibly and ability to sinter large size samples (>30 cm 3) still needs to be improved. In this context, this paper describes both an empirically designed 915 MHz single-mode cavity made from SiC susceptors and refractory thermal insulation, and the 3 D modeling of the process in order to improve our understanding of it. Different susceptors geometries and coupling slit position were numerically tested in order to better understand how these parameters impact the field homogeneity and the process stability. It was found that positioning the largest surface of the susceptors parallel to the electrical field allows a very uniform and hybrid heating of the material, while avoiding plasma or thermal instabilities. This was correlated to the 3 D modeling results. Finally, thanks to a fully automatized system this apparatus was used to sinter large size (~30 cm 3) low-loss dielectric alumina samples. The sintered materials were subsequently characterized in terms of density, grains size distribution and homogeneity. The reproducibility was also discussed demonstrating the process efficiency and reliability.

physics.chem-ph↗

arXiv2020

Microwave flash sintering of metal powders: From experimental evidence to multiphysics simulation

Flash sintering phenomena are predominantly associated with ceramics due to thermal runaway of their electric conductivity noticeably represented in materials such as zirconia or silicon carbide. Because of their high electric conductivity, flash sintering of metals is nearly inexistent. In this work, an original metal powder flash sintering method based on a microwave approach is presented. Within the developed approach, an unusually fast (60 s) thermal and sintering runaway of Ti-6Al-4V powder is experimentally revealed under microwave illumination. This phenomenon is simulated based on an electromagnetic-thermal-mechanical (EMTM) model. The developed multiphysics model reveals that the metal powder specimen's runaway does not result from its intrinsic material properties, but results from the resonance phenomenon thermally activated by the surrounding tooling material. The EMTM simulation predicts with a very good accuracy the microwave repartition and the resulting densification and powder specimen's shape distortions observed experimentally. The comparison of the microwave and conventional sintering kinetics indicates an important acceleration of the sintering behavior under microwave heating. The developed sintering approach has a potential of the implementation for time-effective mass production of small metal parts.

cond-mat.mtrl-sci↗

arXiv2020

Predicting final stage sintering grain growth affected by porosity

Grain growth has a definitive impact on the quality of transparent sintered materials in areas such as ballistics, biomaterials, jewelry, etc. Controlling the sintering trajectory at the precise moment of final stage sintering is one of the main sintering challenges for obtaining highperformance, fully-dense nano-ceramics. However, the final stage of sintering involves a very complex coupling between the rate of porosity elimination/grain growth and transition mechanisms. This complexity makes predicting the sintering trajectory very difficult, and most transparent material production escapes this problem by using expensive high-pressure methods such as hot isostatic pressing (HIP). In the quest for a pressureless transparent material process, this paper addresses the challenge of predicting grain growth in the transition domain from the grain growth onset (in a high porosity region) to full density for MgAl 2 O 4 spinel. We present a comprehensive modeling approach linking theoretical models such as Zhao \& Harmer's and Olevsky's equations to accurately predict the complex grain growth transition region of final stage sintering. This modeling approach opens up the possibility for numerical exploration of microstructure development via underlying kinetics experimental identification.

cond-mat.mtrl-sci↗

arXiv2020

Graphite creep negation during flash spark plasma sintering under temperatures close to 2000$^\circ$C

Graphite creep has high importance for applications using high pressures (100 MPa) and temperatures close to 2000 {\textdegree}C. In particular, the new flash spark plasma sintering process (FSPS) is highly sensitive to graphite creep when applied to ultra-high temperature materials such as silicon carbide. In this flash process taking only a few seconds, the graphite tooling reaches temperatures higher than 2000 {\textdegree}C resulting in its irreversible deformation. The graphite tooling creep prevents the flash spark plasma sintering process from progressing further. In this study, a finite element model is used to determine FSPS tooling temperatures. In this context, we explore the graphite creep onset for temperatures above 2000 {\textdegree}C and for high pressures. Knowing the graphite high temperature limit, we modify the FSPS process so that the sintering occurs outside the graphite creep range of temperatures/pressures. 95 % dense silicon carbide compacts are obtained in about 30 s using the optimized FSPS.

cond-mat.mtrl-sci↗

arXiv2020

Master sintering curve with dissimilar grain growth trajectories: A case study on MgAl2O4

Sintering is a key step in the processing of high performance ceramics. Both the density and the grain size play a crucial role on the ceramic sintering kinetics and the final material properties. The master sintering curve (MSC) is a well-known tool for exploring sintering models kinetics. However, the conventional MSC theory assumes a unique sintering trajectory, while our study on MgAl2O4 spinel shows dissimilar growth response. Park's MSC theory has been applied and compared with the conventional MSC approach for obtaining the activation energy with and without dissimilar grain growth trajectories.

cond-mat.mtrl-sci↗

arXiv2020

Proportional integral derivative, modeling and ways of stabilization for the spark plasma sintering process

The stability ofthe proportional--integral--derivative (PID)controlof temperature in the spark plasma sintering (SPS) process is investigated.ThePID regulationsof this process are tested fordifferent SPS toolingdimensions, physical parameters conditions,andareas of temperature control. It isshown thatthe PID regulation quality strongly depends on the heating time lag between the area of heat generation and the area of the temperature control. Tooling temperature rate maps arestudied to revealpotential areas forhighlyefficientPID control.The convergence of the model and experiment indicatesthat even with non-optimal initial PIDcoefficients, it is possible to reduce the temperature regulation inaccuracy to less than 4K by positioning the temperature control location in highlyresponsiveareas revealed by the finite-element calculationsof the temperature spatial distribution.

physics.app-ph↗

arXiv2020

Swelling negation during sintering of sterling silver: An experimental and theoretical approach

One of the main challenges of the sintering of sterling silver is the phenomenon of swelling causing de-densification and a considerable reduction of the sintering kinetics. This swelling phenomenon opposes sintering and it needs to be addressed by a well-controlled processing atmosphere. In the present study, the pressure-less sintering behavior of sterling silver is investigated in air, argon, and vacuum. A specially modified spark plasma sintering mold is designed to study the pressure-less sintering of sterling silver in a high vacuum environment. The conducted analysis is extended to the new constitutive equations of sintering enabling the prediction of the swelling phenomena and the identification of the internal equivalent pressure that opposes the sintering.

cond-mat.mtrl-sci↗

arXiv2020

Inherent heating instability of direct microwave sintering process: Sample analysis for porous 3Y-ZrO2

Direct microwave heating of 3Y-ZrO 2 is studied at frequency of 2.45 GHz. Different conditions of input power, sample position and size are tested. For the first time, the experimentally known instability of microwave sintering is explained coupling the effective medium approximation and finite-element method. We show how the material dielectric permittivity imaginary part which increases with temperature and relative density encourages high hot spot phenomena. It is shown that the sample location has a great impact on the

cond-mat.mtrl-sci↗

arXiv2020

Porosity dependence of powder compaction constitutive parameters: Determination based on spark plasma sintering tests

The modeling of powder compaction process, such as spark plasma sintering (SPS), requires the determination of the visco-plastic deformation behavior of the particle material including the viscosity moduli. The establishment of these parameters usually entails a long and difficult experimental campaign which in particular involves several hot isostatic pressing tests. A more straightforward method based on the coupled sinter-forging and die compaction tests, which can be easily carried out in a regular SPS device, is presented. Compared to classical creep mechanism studies, this comprehensive experimental approach can reveal the in situ porous structure morphology influence on the sintering process.

cond-mat.mtrl-sci↗

arXiv2020

Electric current effects in spark plasma sintering: From the evidence of physical phenomenon to constitutive equation formulation

The 3 heating modes are utilized to make ZrN powders have 3 different levels of the electric current density at the same temperature during spark plasma sintering (SPS). The constitutive equation of sintering for SPS is applied to the experimental porosity evolution of ZrN from three SPS modes, and this showed high electric current density increase the electric current assisted deformability value of ZrN pellets, resulting in a reduction of the flow stress. The electric current flow enhances the dislocation motion, which was experimentally proved and analyzed by modified Williamson-Hall equation applying to X-ray diffraction results, and the mechanical strength test of ZrN pellets.

cond-mat.mtrl-sci↗

arXiv2020

Dielectric properties of flash spark plasma sintered BaTiO$_3$ and CaCu$_3$Ti$_4$O$_{12}$

Flash sintering is an approach allowing reducing the sintering time to mere seconds. To improve the microstructures and the properties of flash sintered specimens, this process has been successfully adapted to pressure assisted sintering such as the spark plasma sintering. This work is the exploration of the potential of this ultra-rapid sintering process for the improvement of the dielectric properties of well-known materials such as BaTiO$_3$ and CaCu$_3$Ti$_4$O$_{12}$. In particular, we focus on the potential improvement of the dielectric loss,

physics.chem-ph↗

arXiv2020

All-Materials-Inclusive Flash Spark Plasma Sintering

A new flash (ultra-rapid) spark plasma sintering method applicable to various materials systems, regardless of their electrical resistivity, is developed. A number of powders ranging from metals to electrically insulative ceramics have been successfully densified resulting in homogeneous microstructures within sintering times of 8-35 s. A finite element simulation reveals that the developed method, providing an extraordinary fast and homogeneous heating concentrated in the sample's volume and punches, is applicable to all the different samples tested. The utilized uniquely controllable flash phenomenon is enabled by the combination of the electric current concentration around the sample and the confinement of the heat generated in this area by the lateral thermal contact resistance. The presented new method allows: extending flash sintering to nearly all materials, controlling sample shape by an added graphite die, and an energy efficient mass production of small and intermediate size objects. This approach represents also a potential venue for future investigations of flash sintering of complex shapes.

cond-mat.mtrl-sci↗

arXiv2020

Fully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO 2

Direct and hybrid microwave sintering of 3Y-ZrO 2 are comparatively studied at frequency of 2.45 GHz. Using the continuum theory of sintering, a fully coupled electromagnetic-thermalmechanical (EMTM) finite element simulation is carried out to predict powder samples deformation during their microwave processing. Direct and hybrid heating configurations are computationally tested using advanced heat transfer simulation tools including the surface to surface thermal radiation boundary conditions and a numeric proportional-integral-derivative (PID) regulation. The developed modeling framework shows a good agreement of the calculation results with the known experimental data on the microwave sintering of 3Y-ZrO 2 in terms of the densification kinetics. It is shown that the direct heating configuration renders highly hot spot effects resulting in non-homogenous densification causing processed specimen's final shape distortions. Compared to the direct heating, the hybrid heating configuration provides a reduction of the thermal inhomogeneity along with a densification homogenization. As a result of the hybrid heating, the total densification of the specimen is attained without specimen distortions. It is also shown that the reduction of the sample size has a stabilization effect on the temperature and relative density spatial distributions.

cond-mat.mtrl-sci↗

arXiv2020

Microwave sintering of complex shapes: From multiphysics simulation to improvements of process scalability

The microwave sintering homogeneity of large and complex shape specimens is analyzed. A new approach enabling the fabrication of complex shapes ceramics via 3D printing and microwave sintering is presented. The use of a dental microwave cavity is shown to enable a substantial level of densification of complex shape components while restricting the grain growth. The homogeneity of the processed samples during microwave sintering is studied by an electromagnetic-thermal-mechanical simulation. The realistic densification behavior, that phenomenologically takes into account the microwave effect, is included in the modeling framework. The simulation indicates the sharp correlation between the microwave field distribution in the cavity, the temperature profile, and the specimen's shape distortion.

cond-mat.mtrl-sci↗

arXiv2020

Energy efficient spark plasma sintering: Breaking the threshold of large dimension tooling energy consumption

An energy efficient spark plasma sintering method enabling the densification of large size samples assisted by very low electric current levels is developed. In this method, the electric current is concentrated in the graphite foils around the sample. High energy dissipation is then achieved in this area enabling the heating and full densification of large (alumina) parts ({Ø} 40 mm) at relatively low currents (800 A). The electrothermal mechanical simulation reveals that the electric current needed to heat the large samples is 70 % lower in the energy efficient configuration compared to the traditional configuration. The presence of thermal and densification gradients is also revealed for the larger size samples. Potential solutions for this problem are discussed. The experiments confirm the possibility of full densification (96-99 %) of large alumina samples. This approach allows using small (and low cost) SPS devices (generally limited to 10-15 mm samples) for large size samples (40-50 mm). The developed technique enables also an optimized energy consumption by large scale SPS systems.

cond-mat.mtrl-sci↗

arXiv2020

Flash microwave pressing of zirconia

Microwave Pressing is a promising way to reduce microwave sintering temperatures and stabilize microwave powder materials processing. A multi-physics simulation was conducted of the regulated pressure-assisted microwave cavity. This simulation took into consideration resonance phenomena and the nonlinear temperature-dependent material parameters of zirconia. The intrinsic behaviors of microwave systems and zirconia make the regulation of the microwave pressing difficult. However, the same phenomena can be used to activate flash sintering. Flash microwave sintering uses high electric fields of the resonant microwave profile, the Negative Temperature Behavior (NTC) of zirconia resistivity, and the mechanical pressure applied to the powder via a die compaction configuration. The resulting flash microwave pressing still needs improvement in terms of the processed material structure homogeneity, but it has the capacity to become the fastest sintering treatment as it allows room temperature activation where the total process time only takes a few seconds. In addition, this 10-20s processing technique has shown good potential for improving the transparency of alumina pre-sintered specimens.

physics.app-ph↗