Searcharxiv⌕ Search

arXiv subjects

Charlotte Z. Bond

Publications and source records attributed to Charlotte Z. Bond.

At least 19 recordsLinked to original sources

Full frame denoising for pyramid wavefront sensors

Adaptive optics systems operating under low-flux conditions face significant challenges, as photon and detector noise in particular degrade wavefront measurements and ultimately limit correction performance. While pyramid wavefront sensors (PyWFSs) offer greater sensitivity than conventional wavefront sensors such as the Shack-Hartmann sensor in many operating regimes, obtaining accurate wavefront estimates under photon-starved conditions remains a key challenge. We present a full-frame image denoising strategy for the PyWFS that exploits the nonlocal self-similarity of wavefront sensor image patches through FFT-accelerated patch grouping and global collaborative 3D wavelet filtering, applied directly to the raw PyWFS intensity frame prior to slope computation. Specifically, the method suppresses noise while preserving structural features required for accurate wavefront reconstruction. The approach is evaluated using end-to-end simulations of a VLT-scale SCAO system. The results show improved performance in low signal-to-noise regimes, with typical Strehl ratio gains of up to 12% and an increase in limiting magnitude of approximately 0.5 in median seeing conditions. Modal analysis indicates reduced variance across most controlled modes. The improved PSF quality enables a reduction in the FWHM and an enhanced contrast. These results demonstrate that image-domain denoising can improve the robustness of PyWFS-based AO systems and extend their operational range toward fainter guide stars.

physics.optics↗

DM/WFS mis-registration tracking: Implementation and on-sky validation of SPRINT at LBT

The advent of telescopes with an integrated deformable mirror (DM) presents new challenges for adaptive optics (AO) systems. The alignment between the DM and wavefront sensor (WFS) is expected to regularly evolve during operations due to their large separation. Without tracking and correction, these mis-registrations between the DM and WFS lead to loop instability, preventing diffraction limited performance from being realised. SPRINT\cite{heritier2021} provides an approach to track these mis-registrations during observations. Rotation, shift, and magnification mis-registrations can all be recovered. The Large Binocular Telescope (LBT) currently lacks an operational solution for tracking these mis-registrations, while SPRINT has been selected as the baseline approach for several instruments on the forthcoming Extremely Large Telescope (ELT). We report on the implementation of SPRINT into the LBT real time computer and present experimental results from both daytime and on-sky testing to validate the method.

astro-ph.IM↗

Ground control to major time-lag: on-sky results of data-driven predictive wavefront control at Keck Observatory

Directly imaging and characterizing exoplanets requires extreme adaptive optics (XAO), which achieves exquisite wavefront correction over a small (<5") field of view. Temporal errors, where the wavefront evolves faster than the lag between wavefront sensing and control, are often a leading term in the error budget for these XAO systems. Predictive control mitigates temporal errors by predicting where the wavefront will be by the time the system correction is applied. In particular, empirical orthogonal functions (EOF) learn linear correlations in a wavefront using previous states in the wavefront sensor history. We present on-sky results of a new implementation of EOF built directly into the Keck-II real time controller. On-sky engineering tests at Keck Observatory of the predictive controller show a 20% performance improvement over a classic integrator according to wavefront residuals from the Shack-Hartmann Wavefront Sensor (SHWFS). Parameter optimization studies show that there is a clear improvement based on varying predictive filter hyper-parameters, but that within a reasonable regime, varying filter parameters does not degrade performance to notably worse than an integrator. NIRC2 imaging through the Brackett Gamma=2190nm filter shows comparable performance between an integrator and predictor, both comparing Strehl Ratio (SR) and coronagraph-free contrast. We also explore power in principal components, and find a modest improvement (on the order of 3% less area under the curve of component strength) from the predictor over the integrator. This work not only improves current observing for the Keck community, but also acts as a pathfinder for predictive control methods with extremely large telescopes.

astro-ph.IM↗

Super-resolution wavefront reconstruction in adaptive-optics with pyramid sensors

Super-resolution (SR) refers to a combination of optical design and signal processing techniques jointly employed to obtain reconstructed wave-fronts at a higher-resolution from multiple low-resolution samples, overcoming the intrinsic limitations of the latter. After compelling examples have been provided on multi-Shack-Hartman (SH) wave-front sensor (WFS) adaptive optics systems performing atmospheric tomography with laser guide star probes, we broaden the SR concept to pyramid sensors (PyWFS) with a single sensor and a natural guide star. We revisit the analytic PyWFS diffraction model to claim two aspects: i) that we can reconstruct spatial frequencies beyond the natural Shannon-Nyquist frequency imposed by the detector pixel size and/or ii) that the PyWFS can be used to measure amplitude aberrations (at the origin of scintillation). SR offers the possibility to control a higher actuator density deformable mirror from seemingly fewer samples, the quantification of which is one of the goals of this paper. A super-resolved PyWFS is more resilient to mis-registration, lifts alignment requirements and improves performance (against aliasing and other spurious modes AO systems are poorly sensitive to) with only a factor up to 2 increased real-time computational burden.

astro-ph.IM↗

Polychromatic pyramid wavefront sensor with MKID technology for high contrast imaging

The high sensitivity of the pyramid wavefront sensor has made it the preferred sensor in high contrast adaptive optics systems. Future higher contrast systems, like the Extremely Large Telescope's Planetary Camera System, will require higher performance wavefront sensing. A further performance improvement could be achieved with a polychromatic pyramid wavefront sensor by using additional information over a broader wavelength range. The development of such systems is becoming more feasible with the emergence of new detector technologies such as Microwave Kinetic Inductance Detector arrays. These are arrays of superconductor detectors that give a position, arrival time and measure of the energy for each incident photon. This paper introduces the polychromatic pyramid wavefront sensor concept by defining the technologies and techniques employed and their requirements. A method is developed to track the optical gains, taking advantage of the additional wavelength information, and used to compensate for optical gains within an optimised reconstructor to minimise noise propagation. An overview of expected performance improvement, using end-to-end simulations, is provided using the Keck II adaptive optics system as a reference design. The polychromatic pyramid wavefront sensor was shown to increase the limiting magnitude by 1 to 2 magnitudes, and the contrast by factors of 1.5 to 4, versus single band pyramid wavefront sensors, by sensing over a wavelength range approximately five to ten times broader (800-1800 nm) compared to Z band (152 nm wide) and H band (300 nm wide). Practical design and implementation issues have also been considered.

astro-ph.IM↗

Fringing analysis and forward modeling of Keck Planet Imager and Characterizer (KPIC) spectra

The Keck Planet Imager and Characterizer (KPIC) combines high contrast imaging with high resolution spectroscopy (R~35,000 in K band) to study directly imaged exoplanets and brown dwarfs in unprecedented detail. KPIC aims to spectrally characterize substellar companions through measurements of planetary radial velocities, spins, and atmospheric composition. Currently, the dominant source of systematic noise for KPIC is fringing, or oscillations in the spectrum as a function of wavelength. The fringing signal can dominate residuals by up to 10% of the continuum for high S/N exposures, preventing accurate wavelength calibration, retrieval of atmospheric parameters, and detection of planets with flux ratios less than 1% of the host star. To combat contamination from fringing, we first identify its three unique sources and adopt a physically informed model of Fabry-Perot cavities to apply to post-processed data. We find this strategy can effectively model the fringing in observations of A0V/F0V stars, reducing the residual systematics caused by fringing by a factor of 2. Next, we wedge two of the transmissive optics internal to KPIC to eliminate two sources of fringing and confirm the third source as the entrance window to the spectrograph. Finally, we apply our previous model of the Fabry-Perot cavity to new data taken with the wedged optics to reduce the amplitude of the residuals by a factor of 10.

astro-ph.EP↗

Technical description and performance of the phase II version of the Keck Planet Imager and Characterizer

The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction limited, high resolution (R>30000) spectroscopy of exoplanets and low mass companions in the K and L bands. Phase I consisted of single mode fiber injection/extraction units (FIU/FEU) used in conjunction with a H band pyramid wavefront sensor. The use of single mode fibers provides a gain in stellar rejection, a substantial reduction in sky background, and an extremely stable line spread function in the spectrograph. Phase II, deployed and commissioned in 2022, brought a 1000 actuator deformable mirror, beam shaping optics, a vortex mask, and other upgrades to the FIU/FEU. An additional service mission in 2024 extended operations down to y band, delivered an atmospheric dispersion corrector, and provided access to two laser frequency combs. KPIC phase II brings higher planet throughput, lower stellar leakage and many new observing modes which extend its ability to characterize exoplanets at high spectral resolution, building on the success of phase I. In this paper we present a description of the final phase II version of KPIC, along with results of system level laboratory testing and characterization showing the instrument's phase II throughput, stability, repeatability, and other key performance metrics prior to delivery and during installation at Keck. We outlined the capabilities of the various observing modes enabled by the new modules as well as efforts to compensate for static aberrations and non common path errors at Keck, which were issues that plagued phase I. Finally, we show results from commissioning.

astro-ph.IM↗

HD 206893 B at High Spectral Resolution with the Keck Planet Imager and Characterizer (KPIC)

We present an atmospheric characterization and orbital analysis of HD 206893 B, an exceptionally red, L/T-transition substellar companion in a multiplanetary system, via Keck Planet Imager and Characterizer (KPIC) high-resolution (R $\sim$ 35,000) K-band spectroscopy. Using PHOENIX atmospheric models in a forward-model framework that fits the spectrum of the companion and diffracted starlight simultaneously, we detect HD 206893 B at $>8σ$ significance via cross-correlation in two epochs. We find an effective temperature for the companion of $1634^{+72}_{-38}$ K and a log(g) of $4.55^{+0.17}_{-0.22}$. Only accounting for statistical uncertainties, we measure the carbon-oxygen ratio (C/O) of this companion to be $0.57 \pm 0.02$, or near-solar while assuming solar metallicity. The C/O ratio we measure fits the tentative trend of $>4 M_{Jup}$ companions having near-solar C/O ratios while less massive companions have greater-than-solar C/O ratios. Using substellar evolution models, we find an age of $112^{+36}_{-22}$ Myr, a mass of $22.7^{+2.5}_{-1.7} M_{Jup}$, and a radius of $1.11 \pm 0.03 R_{Jup}$ for this companion. We also use KPIC radial velocity data to fit the orbit of HD 206893 B and analyze the orbital stability of this system. We find that the orbital stability is relatively independent of the mass of HD 206893 B, and favors an orbital configuration where B and its interior planetary companion, HD 206893 c, are co-planar. The measured C/O ratio coupled with the current architecture of the system cannot rule out a core accretion scenario, nor a disk fragmentation scenario regarding the formation pathway of HD 206893 B.

astro-ph.EP↗

RV measurements of directly imaged brown dwarf GQ Lup B to search for exo-satellites

GQ Lup B is one of the few substellar companions with a detected cicumplanetary disk, or CPD. Observations of the CPD suggest the presence of a cavity, possibly formed by an exo-satellite. Using the Keck Planet Imager and Characterizer (KPIC), a high contrast imaging suite that feeds a high resolution spectrograph (1.9-2.5 microns, R$\sim$35,000), we present the first dedicated radial velocity (RV) observations around a high-contrast, directly imaged substellar companion, GQ Lup B, to search for exo-satellites. Over 11 epochs, we find a best and median RV error of 400-1000 m/s, most likely limited by systematic fringing in the spectra due to transmissive optics within KPIC. With this RV precision, KPIC is sensitive to exomoons 0.6-2.8% the mass of GQ Lup B ($\sim 30 M_{\text{Jup}}$) at separations between the Roche limit and $65 R_{\text{Jup}}$, or the extent of the cavity inferred within the CPD detected around GQ Lup B. Using simulations of HISPEC, a high resolution infrared spectrograph planned to debut at W.M. Keck Observatory in 2026, we estimate future exomoon sensitivity to increase by over an order of magnitude, providing sensitivity to less massive satellites potentially formed within the CPD itself. Additionally, we run simulations to estimate the amount of material that different masses of satellites could clear in a CPD to create the observed cavity. We find satellite-to-planet mass ratios of $q > 2 \times 10^{-4}$ can create observable cavities and report a maximum cavity size of $\sim 51 \, R_{\text{Jup}}$ carved from a satellite.

astro-ph.EP↗

Keck/KPIC Emission Spectroscopy of WASP-33b

We present Keck/KPIC high-resolution ($R\sim35,000$) $K$-band thermal emission spectroscopy of the ultra-hot Jupiter WASP-33b. The use of KPIC's single-mode fibers greatly improves both blaze and line-spread stabilities relative to slit spectrographs, enhancing the cross-correlation detection strength. We retrieve the dayside emission spectrum with a nested sampling pipeline which fits for orbital parameters, the atmospheric pressure-temperature profile, and molecular abundances.We strongly detect the thermally-inverted dayside and measure mass-mixing ratios for CO ($\log\rm CO_{MMR} = -1.1^{+0.4}_{-0.6}$), H$_2$O ($\log\rm H_2O_{MMR} = -4.1^{+0.7}_{-0.9}$) and OH ($\log\rm OH_{MMR} = -2.1^{+0.5}_{-1.1}$), suggesting near-complete dayside photodissociation of H$_2$O. The retrieved abundances suggest a carbon- and possibly metal-enriched atmosphere, with a gas-phase C/O ratio of $0.8^{+0.1}_{-0.2}$, consistent with the accretion of high-metallicity gas near the CO$_2$ snow line and post-disk migration or with accretion between the soot and H$_2$O snow lines. We also find tentative evidence for $\rm ^{12}CO/^{13}CO \sim 50$, consistent with values expected in protoplanetary disks, as well as tentative evidence for a metal-enriched atmosphere (2--15$\times$ solar). These observations demonstrate KPIC's ability to characterize close-in planets and the utility of KPIC's improved instrumental stability for cross-correlation techniques.

astro-ph.EP↗

Detecting exomoons from radial velocity measurements of self-luminous planets: application to observations of HR 7672 B and future prospects

The detection of satellites around extrasolar planets, so called exomoons, remains a largely unexplored territory. In this work, we study the potential of detecting these elusive objects from radial velocity monitoring of self-luminous directly imaged planets. This technique is now possible thanks to the development of dedicated instruments combining the power of high-resolution spectroscopy and high-contrast imaging. First, we demonstrate a sensitivity to satellites with a mass ratio of 1-4% at separations similar to the Galilean moons from observations of a brown-dwarf companion (HR 7672 B; Kmag=13; 0.7" separation) with the Keck Planet Imager and Characterizer (KPIC; R~35,000 in K band) at the W. M. Keck Observatory. Current instrumentation is therefore already sensitive to large unresolved satellites that could be forming from gravitational instability akin to binary star formation. Using end-to-end simulations, we then estimate that future instruments such as MODHIS, planned for the Thirty Meter Telescope, should be sensitive to satellites with mass ratios of ~1e-4. Such small moons would likely form in a circumplanetary disk similar to the Jovian satellites in the solar system. Looking for the Rossiter-McLaughlin effect could also be an interesting pathway to detecting the smallest moons on short orbital periods. Future exomoon discoveries will allow precise mass measurements of the substellar companions that they orbit and provide key insight into the formation of exoplanets. They would also help constrain the population of habitable Earth-sized moons orbiting gas giants in the habitable zone of their stars.

astro-ph.EP↗

Phase II of the Keck Planet Imager and Characterizer: system-level laboratory characterization and preliminary on-sky commissioning

The Keck Planet Imager and Characterizer (KPIC) is a series of upgrades for the Keck II Adaptive Optics (AO) system and the NIRSPEC spectrograph to enable diffraction-limited, high-resolution ($R>30,000$) spectroscopy of exoplanets and low-mass companions in the K and L bands. Phase I consisted of single-mode fiber injection/extraction units (FIU/FEU) used in conjunction with an H-band pyramid wavefront sensor. Phase II, deployed and commissioned in 2022, adds a 1000-actuator deformable mirror, beam-shaping optics, a vortex coronagraph, and other upgrades to the FIU/FEU. The use of single-mode fibers provides a gain in stellar rejection, a substantial reduction in sky background, and an extremely stable line-spread function on the spectrograph. In this paper we present the results of extensive system-level laboratory testing and characterization showing the instrument's Phase II throughput, stability, repeatability, and other key performance metrics prior to delivery and during installation at Keck. We also demonstrate the capabilities of the various observing modes enabled by the new system modules using internal test light sources. Finally, we show preliminary results of on-sky tests performed in the first few months of Phase II commissioning along with the next steps for the instrument. Once commissioning of Phase II is complete, KPIC will continue to characterize exoplanets at an unprecedented spectral resolution, thereby growing its already successful track record of 23 detected exoplanets and brown dwarfs from Phase I. Using the new vortex fiber nulling (VFN) mode, Phase II will also be able to search for exoplanets at small angular separations less than 45 milliarcseconds which conventional coronagraphs cannot reach.

astro-ph.EP↗

Retrieving C and O Abundance of HR 8799 c by Combining High- and Low-Resolution Data

The formation and evolution pathway for the directly-imaged multi-planetary system HR 8799 remains mysterious. Accurate constraints on the chemical composition of the planetary atmosphere(s) are key to solving the mystery. We perform a detailed atmospheric retrieval on HR 8799~c to infer the chemical abundances and abundance ratios using a combination of photometric data along with low- and high-resolution spectroscopic data (R$\sim$20-35,000). We specifically retrieve [C/H], [O/H], and C/O and find them to be 0.55$^{+0.36}_{-0.39}$, 0.47$^{+0.31}_{-0.32}$, and 0.67$^{+0.12}_{-0.15}$ at 68\% confidence. The super-stellar C and O abundances, yet a stellar C/O ratio, reveal a potential formation pathway for HR 8799~c. Planet c, and likely the other gas giant planets in the system, formed early on (likely within $\sim$1 Myr), followed by further atmospheric enrichment in C and O through the accretion of solids beyond the CO iceline. The enrichment either preceded or took place during the early phase of the inward migration to the planet current locations.

astro-ph.EP↗

A Clear View of a Cloudy Brown Dwarf Companion from High-Resolution Spectroscopy

Direct imaging studies have mainly used low-resolution spectroscopy ($R\sim20-100$) to study the atmospheres of giant exoplanets and brown dwarf companions, but the presence of clouds has often led to degeneracies in the retrieved atmospheric abundances (e.g. C/O, metallicity). This precludes clear insights into the formation mechanisms of these companions. The Keck Planet Imager and Characterizer (KPIC) uses adaptive optics and single-mode fibers to transport light into NIRSPEC ($R\sim35,000$ in $K$ band), and aims to address these challenges with high-resolution spectroscopy. Using an atmospheric retrieval framework based on petitRADTRANS, we analyze KPIC high-resolution spectrum ($2.29-2.49~μ$m) and archival low-resolution spectrum ($1-2.2~μ$m) of the benchmark brown dwarf HD 4747 B ($m=67.2\pm1.8~M_{\rm{Jup}}$, $a=10.0\pm0.2$ au, $T_{\rm eff}\approx1400$ K). We find that our measured C/O and metallicity for the companion from the KPIC high-resolution spectrum agree with that of its host star within $1-2σ$. The retrieved parameters from the $K$ band high-resolution spectrum are also independent of our choice of cloud model. In contrast, the retrieved parameters from the low-resolution spectrum are highly sensitive to our chosen cloud model. Finally, we detect CO, H$_2$O, and CH$_4$ (volume mixing ratio of log(CH$_4$)=$-4.82\pm0.23$) in this L/T transition companion with the KPIC data. The relative molecular abundances allow us to constrain the degree of chemical disequilibrium in the atmosphere of HD 4747 B, and infer a vertical diffusion coefficient that is at the upper limit predicted from mixing length theory.

astro-ph.EP↗

Predictive wavefront control on Keck II adaptive optics bench: on-sky coronagraphic results

The behavior of an adaptive optics (AO) system for ground-based high contrast imaging (HCI) dictates the achievable contrast of the instrument. In conditions where the coherence time of the atmosphere is short compared to the speed of the AO system, the servo-lag error can become the dominant error term of the AO system. While the AO system measures the wavefront error and subsequently applies a correction (typically taking a total of one or a few milliseconds), the atmospheric turbulence above the telescope has changed resulting in the servo-lag error. In addition to reducing the Strehl ratio, the servo-lag error causes a build-up of speckles along the direction of the dominant wind vector in the coronagraphic image, severely limiting the contrast at small angular separations. One strategy to mitigate this problem is to predict the evolution of the turbulence over the delay time. Our predictive wavefront control algorithm minimizes, in a mean square sense, the wavefront error over the delay and has been implemented on the Keck II AO bench. In this paper, we report on the latest results of our algorithm and discuss updates to the algorithm itself. We explore how to tune various filter parameters based on both daytime laboratory tests and on-sky tests. We show a reduction in the residual-mean-square wavefront error for the predictor compared to the leaky integrator (the standard controller for Keck) implemented on Keck for three separate nights. Finally, we present contrast improvements for daytime and on-sky tests for the first time. Using the L-band vortex coronagraph for Keck's NIRC2 instrument, we find a contrast gain of up to 2 at a separation of 3 lambda/D and up to 3 for larger separations (3-7 lambda/D).

astro-ph.IM↗

Retrieving the C and O Abundances of HR 7672~AB: a Solar-Type Primary Star with a Benchmark Brown Dwarf

A benchmark brown dwarf (BD) is a BD whose properties (e.g., mass and chemical composition) are precisely and independently measured. Benchmark BDs are valuable in testing theoretical evolutionary tracks, spectral synthesis, and atmospheric retrievals for sub-stellar objects. Here, we report results of atmospheric retrieval on a synthetic spectrum and a benchmark BD -- HR 7672~B -- with \petit. First, we test the retrieval framework on a synthetic PHOENIX BT-Settl spectrum with a solar composition. We show that the retrieved C and O abundances are consistent with solar values, but the retrieved C/O is overestimated by 0.13-0.18, which is $\sim$4 times higher than the formal error bar. Second, we perform retrieval on HR 7672~B using high spectral resolution data (R=35,000) from the Keck Planet Imager and Characterizer (KPIC) and near infrared photometry. We retrieve [C/H], [O/H], and C/O to be $-0.24\pm0.05$, $-0.19\pm0.04$, and $0.52\pm0.02$. These values are consistent with those of HR 7672~A within 1.5-$σ$. As such, HR 7672~B is among only a few benchmark BDs (along with Gl 570~D and HD 3651~B) that have been demonstrated to have consistent elemental abundances with their primary stars. Our work provides a practical procedure of testing and performing atmospheric retrieval, and sheds light on potential systematics of future retrievals using high- and low-resolution data.

astro-ph.EP↗

Status of predictive wavefront control on Keck II adaptive optics bench: on-sky coronagraphic results

The behavior of an adaptive optics (AO) system for ground-based high contrast imaging (HCI) dictates the achievable contrast of the instrument. In conditions where the coherence time of the atmosphere is short compared to the speed of the AO system, the servo-lag error becomes the dominate error term of the AO system. While the AO system measures the wavefront error and subsequently applies a correction (taking a total of 1 to 2 milli-seconds), the atmospheric turbulence above the telescope has changed. In addition to reducing the Strehl ratio, the servo-lag error causes a build-up of speckles along the direction of the dominant wind vector in the coronagraphic image, severely limiting the contrast at small angular separations. One strategy to mitigate this problem is to predict the evolution of the turbulence over the delay. Our predictive wavefront control algorithm minimizes the delay in a mean square sense and has been implemented on the Keck II AO bench. In this paper we report on the latest results of our algorithm and discuss updates to the algorithm itself. We explore how to tune various filter parameters on the basis of both daytime laboratory tests and on-sky tests. We show a reduction in residual-mean-square wavefront error for the predictor compare to the leaky integrator implemented on Keck. Finally, we present contrast improvements for both day time and on-sky tests. Using the L-band vortex coronagraph for Keck's NIRC2 instrument, we find a contrast gain of 2.03 at separation of 3~$λ/D$ and up to 3 for larger separations (4-6~$λ/D$).

astro-ph.IM↗

The Keck Planet Imager and Characterizer: A dedicated single-mode fiber injection unit for high resolution exoplanet spectroscopy

The Keck Planet Imager and Characterizer (KPIC) is a purpose-built instrument to demonstrate new technological and instrumental concepts initially developed for the exoplanet direct imaging field. Located downstream of the current Keck II adaptive optic system, KPIC contains a fiber injection unit (FIU) capable of combining the high-contrast imaging capability of the adaptive optics system with the high dispersion spectroscopy capability of the current Keck high resolution infrared spectrograph (NIRSPEC). Deployed at Keck in September 2018, this instrument has already been used to acquire high resolution spectra ($R > 30,000$) of multiple targets of interest. In the near term, it will be used to spectrally characterize known directly imaged exoplanets and low-mass brown dwarf companions visible in the northern hemisphere with a spectral resolution high enough to enable spin and planetary radial velocity measurements as well as Doppler imaging of atmospheric weather phenomena. Here we present the design of the FIU, the unique calibration procedures needed to operate a single-mode fiber instrument and the system performance.

astro-ph.IM↗