arXiv subjects

Chen Peng

Publications and source records attributed to Chen Peng.

52 records · Page 3Linked to original sources

arXiv2022

Thermal load models for the static design of steel-concrete composite girders

Although the recommended temperature gradient models of composite girders are considered in current specifications for classifying temperature effects in various countries, they are not appropriate enough for static design. Moreover, existing national standards cannot explain the mechanism of the thermal effect on the bridge. To further investigate thermal load models of composite girders, this work proposed a decomposing method for vertical nonlinear temperature gradients based on thermal effects and a calculating method for the thermal stress of composite girders. Equivalent temperature (equivalent uniform temperature, equivalent linear temperature, and equivalent nonlinear temperature), temperature difference, and cyclic equivalent uniform temperature are analyzed to reflect the characteristics of thermal effect in composite girders. The stand values of temperature differences and equivalent temperature with a 50-year return period were investigated via probabilistic statistical analysis. Additionally, two vertical thermal load models (VTLM 1 and VTLM 2) were set up to facilitate the design and applied to stress analysis. The result demonstrates that the proposed thermal load model is more suitable than the Chinese Specification for calculating the thermal effects of composite girders.

physics.app-ph↗

arXiv2022

Stealthy Measurement-Aided Pole-Dynamics Attacks with Nominal Models

When traditional pole-dynamics attacks (TPDAs) are implemented with nominal models, model mismatch between exact and nominal models often affects their stealthiness, or even makes the stealthiness lost. To solve this problem, our current paper presents a novel stealthy measurement-aided pole-dynamics attacks (MAPDAs) method with model mismatch. Firstly, the limitations of TPDAs using exact models are revealed, where exact models help ensure the stealthiness of TPDAs but model mismatch severely influences its stealthiness. Secondly, to handle model mismatch, the proposed MAPDAs method is designed by using a model reference adaptive control strategy, which can keep the stealthiness. Moreover, it is easier to implement as only the measurements are needed in comparison with the existing methods requiring both the measurements and control inputs. Thirdly, the performance of the proposed MAPDAs method is explored using convergence of multivariate measurements, and MAPDAs with model mismatch have the same stealthiness and similar destructiveness as TPDAs. Specifically, MAPDAs with adaptive gains will remain stealthy at an acceptable detection threshold till destructiveness occurs. Finally, experimental results from a networked inverted pendulum system confirm the feasibility and effectiveness of the proposed method.

eess.SY↗

arXiv2022

qrpca: A Package for Fast Principal Component Analysis with GPU Acceleration

We present qrpca, a fast and scalable QR-decomposition principal component analysis package. The software, written in both R and python languages, makes use of torch for internal matrix computations, and enables GPU acceleration, when available. qrpca provides similar functionalities to prcomp (R) and sklearn (python) packages respectively. A benchmark test shows that qrpca can achieve computational speeds 10-20 $\times$ faster for large dimensional matrices than default implementations, and is at least twice as fast for a standard decomposition of spectral data cubes. The qrpca source code is made freely available to the community.

astro-ph.IM↗

arXiv2021

Predictive Scheduling of Collaborative Mobile Robots for Improved Crop-transport Logistics of Manually Harvested Crops

Mechanizing the manual harvesting of fresh market fruits constitutes one of the biggest challenges to the sustainability of the fruit industry. During manual harvesting of some fresh-market crops like strawberries and table grapes, pickers spend significant amounts of time walking to carry full trays to a collection station at the edge of the field. A step toward increasing harvest automation for such crops is to deploy harvest-aid collaborative robots (co-bots) that transport the empty and full trays, thus increasing harvest efficiency by reducing pickers' non-productive walking times. This work presents the development of a co-robotic harvest-aid system and its evaluation during commercial strawberry harvesting. At the heart of the system lies a predictive stochastic scheduling algorithm that minimizes the expected non-picking time, thus maximizing the harvest efficiency. During the evaluation experiments, the co-robots improved the mean harvesting efficiency by around 10% and reduced the mean non-productive time by 60%, when the robot-to-picker ratio was 1:3. The concepts developed in this work can be applied to robotic harvest-aids for other manually harvested crops that involve walking for crop transportation.

cs.RO↗

arXiv2021

Convex hulls of face-vertex incident vectors of 3-colorable polytopes

The convex hulls of face-vertex incident vectors of 3-face-colorable convex polytopes are computed. It is found that every such convex hull is a $d$-polytope with $d+2$ or $d+3$ vertices. Utilizing Gale transform and Gale diagram, we calculate its combinatorial structure. Finally, a necessary and sufficient criterion for combinatorial equivalence of two such convex hulls is given.

math.CO↗

arXiv2021

A strawberry harvest-aiding system with crop-transport co-robots: Design, development, and field evaluation

cs.RO↗

arXiv2020

Deconfined Quantum Phase Transition of a Higher-Order Symmetry-Protected Topological State

A higher-order (HO) symmetry-protected topological (SPT) state can be realized in a plaquette-modulated square lattice antiferromagnet, which hosts a spin-$1/2$ degenerate mode on each corner of the lattice with open boundaries. In this work, we show with the field-theoretic analysis and quantum Monte Carlo simulations that the plaquette modulation can drive a direct topological quantum phase transition from the HOSPT to a trivial disordered phase across the deconfined quantum critical point (DQCP) between the antiferromagnetic (AF) order and the valence bond solid (VBS) order, thus the DQCP is a multicritical point bridging both the AF-VBS transition and the topological transition of the HOSPT phase. Our work thus reveals the ubiquitous duality between topological transitions of SPT phases and DQCPs.

cond-mat.str-el↗

arXiv2019

Combined spontaneous symmetry-breaking and symmetry-protected topological order from cluster charge interaction

The study of symmetry-protected topological states in presence of electron correlations has recently aroused great interest as rich and exotic phenomena can emerge. Here, we report a concrete example by employing large-scale unbiased quantum Monte Carlo study of the Kane-Mele model with cluster charge interactions. The ground-state phase diagram for the model at half filling is established. Our simulation identifies the coexistence of a symmetry-protected topological order with a symmetry-breaking Kekul$\acute{e}$ valence bond order and shows that the spontaneous symmetry-breaking is accompanied by an interaction-driven topological phase transition (TPT). This TPT features appearance of zeros of single-particle Green's function and gap closing in spin channel rather than single-particle excitation spectrum, and thus has no mean-field correspondence.

cond-mat.str-el↗

arXiv2019

Correlation Effects in Quadrupole Insulators: a Quantum Monte Carlo Study

The quadrupole insulator, a high-order topological insulator, with on-site Hubbard interaction is numerically studied by large-scale projector quantum Monte Carlo (PQMC) simulations. The Green's function formalism is successfully used to characterize topological properties in interacting quadrupole insulators for the first time. We find that the topological quadrupole insulator is stable against weak interactions and turns into a trivial antiferromagnetic (AFM) insulator by a continuous topological phase transition (TPT) for strong interactions. The critical exponents related to the TPT are estimated to be $ν=0.67(4)$, $β=0.40(2)$, which are distinct from those of the known AFM transitions and suggest a new universality class.

cond-mat.str-el↗

arXiv2018

Optimization Design of Decentralized Control for Complex Decentralized Systems

A new method is developed to deal with the problem that a complex decentralized control system needs to keep centralized control performance. The systematic procedure emphasizes quickly finding the decentralized subcontrollers that matching the closed-loop performance and robustness characteristics of the centralized controller, which is featured by the fact that GA is used to optimize the design of centralized H-infinity controller K(s) and decentralized engine subcontroller KT(s), and that only one interface variable needs to satisfy decentralized control system requirement according to the proposed selection principle. The optimization design is motivated by the implementation issues where it is desirable to reduce the time in trial and error process and accurately find the best decentralized subcontrollers. The method is applied to decentralized control system design for a short takeoff and landing fighter. By comparing the simulation results of the decentralized control system with those of the centralized control system, the target of the decentralized control attains the performance and robustness of centralized control is validated.

eess.SY↗

arXiv2018

Toward Human-in-the-Loop Supervisory Control for Cyber-Physical Networks

This work proposes a novel approach to include a model of making decision in human brain into the control loop. Employing the methodology developed in mathematical neuroscience, we construct a model that accounts for quality of human decision in supervisory tasks. We specifically focus on adaptive gain theory and the strategy selection problem. The proposed model is shown to be capable of explaining the change of a strategy from compensatory to heuristics in different conditions. We also propose a method to incorporate the effect of internal and external parameters such as stress level and emergencies in the decision model. The model is employed in a supervisory controller that dispatches the jobs between autonomy and a human supervisor in an efficient way.

eess.SY↗

arXiv2018

A Spiking Neural Dynamical Drift-Diffusion Model on Collective Decision Making with Self-Organized Criticality

This article proposes a novel collective decision making scheme to solve the multi-agent drift-diffusion-model problem with the help of spiking neural networks. The exponential integrate-and-fire model is used here to capture the individual dynamics of each agent in the system, and we name this new model as Exponential Decision Making (EDM) model. We demonstrate analytically and experimentally that the gating variable for instantaneous activation follows Boltzmann probability distribution, and the collective system reaches meta-stable critical states under the Markov chain premises. With mean field analysis, we derive the global criticality from local dynamics and achieve a power law distribution. Critical behavior of EDM exhibits the convergence dynamics of Boltzmann distribution, and we conclude that the EDM model inherits the property of self-organized criticality, that the system will eventually evolve toward criticality.

eess.SY↗

arXiv2017

Ridesourcing Car Detection by Transfer Learning

Ridesourcing platforms like Uber and Didi are getting more and more popular around the world. However, unauthorized ridesourcing activities taking advantages of the sharing economy can greatly impair the healthy development of this emerging industry. As the first step to regulate on-demand ride services and eliminate black market, we design a method to detect ridesourcing cars from a pool of cars based on their trajectories. Since licensed ridesourcing car traces are not openly available and may be completely missing in some cities due to legal issues, we turn to transferring knowledge from public transport open data, i.e, taxis and buses, to ridesourcing detection among ordinary vehicles. We propose a two-stage transfer learning framework. In Stage 1, we take taxi and bus data as input to learn a random forest (RF) classifier using trajectory features shared by taxis/buses and ridesourcing/other cars. Then, we use the RF to label all the candidate cars. In Stage 2, leveraging the subset of high confident labels from the previous stage as input, we further learn a convolutional neural network (CNN) classifier for ridesourcing detection, and iteratively refine RF and CNN, as well as the feature set, via a co-training process. Finally, we use the resulting ensemble of RF and CNN to identify the ridesourcing cars in the candidate pool. Experiments on real car, taxi and bus traces show that our transfer learning framework, with no need of a pre-labeled ridesourcing dataset, can achieve similar accuracy as the supervised learning methods.

cs.LG↗

arXiv2017

Low-field electron mobility of InSb nanowires: Numerical efforts to larger cross sections

Within the framework of Boltzmann equation, we present a $\mathbf{k\cdot p}$ theory based study for the low-field mobilities of InSb nanowires (InSb NWs) with relatively large cross sectional sizes (with diameters up to 51.8 nm). For such type of large size nanowires, the intersubband electron-phonon scattering is of crucial importance to affect the scattering rate and then the mobility. In our simulation, the lowest 15 electron subbands and 50 transverse modes of phonons are carefully accounted for. We find that, up to the 51.84 nm diameter, the mobility monotonously increases with the diameter, not yet showing any saturated behavior. We also find that, while the bulk InSb mobility is considerably higher than the bulk Si, the small size (e.g. $\sim 3$ nm diameter) nanowires from both materials have similar magnitude of mobilities. This implies, importantly, that the mobility of the InSb NWs would decrease faster than the SiNWs as we reduce the cross sectional size of the nanowires.

cond-mat.mes-hall↗

arXiv2013

Progress on the Construction of the 100 MeV / 100 kW Electron Linac for the NSC KIPT Neutron Source

IHEP, China is constructing a 100 MeV / 100 kW electron Linac for NSC KIPT, Ukraine. This linac will be used as the driver of a neutron source based on a subcritical assembly. In 2012, the injector part of the accelerator was pre-installed as a testing facility in the experimental hall #2 of IHEP. The injector beam and key hardware testing results were met the design goal. Recently, the injector testing facility was disassembled and all of the components for the whole accelerator have been shipped to Ukraine from China by ocean shipping. The installation of the whole machine in KIPT will be started in June, 2013. The construction progress, the design and testing results of the injector beam and key hardware are presented.

physics.acc-ph↗

arXiv2008

Cross-Layer Adaptive Feedback Scheduling of Wireless Control Systems

There is a trend towards using wireless technologies in networked control systems. However, the adverse properties of the radio channels make it difficult to design and implement control systems in wireless environments. To attack the uncertainty in available communication resources in wireless control systems closed over WLAN, a cross-layer adaptive feedback scheduling (CLAFS) scheme is developed, which takes advantage of the co-design of control and wireless communications. By exploiting cross-layer design, CLAFS adjusts the sampling periods of control systems at the application layer based on information about deadline miss ratio and transmission rate from the physical layer. Within the framework of feedback scheduling, the control performance is maximized through controlling the deadline miss ratio. Key design parameters of the feedback scheduler are adapted to dynamic changes in the channel condition. An event-driven invocation mechanism for the feedback scheduler is also developed. Simulation results show that the proposed approach is efficient in dealing with channel capacity variations and noise interference, thus providing an enabling technology for control over WLAN.

cs.NI↗