Searcharxiv⌕ Search

arXiv subjects

Chen Shen

Publications and source records attributed to Chen Shen.

At least 181 records · Page 10Linked to original sources

Chance-constrained OPF: A Distributed Method with Confidentiality Preservation

Given the increased percentage of wind power in power systems, chance-constrained optimal power flow (CC-OPF) calculation, as a means to take wind power uncertainty into account with a guaranteed security level, is being promoted. Compared to the local CC-OPF within a regional grid, the global CC-OPF of a multi-regional interconnected grid is able to coordinate across different regions and therefore improve the economic efficiency when integrating high percentage of wind power generation. In this global problem, however, multiple regional independent system operators (ISOs) participate in the decision-making process, raising the need for distributed but coordinated approaches. Most notably, due to regulation restrictions, commercial interest, and data security, regional ISOs may refuse to share confidential information with others, including generation cost, load data, system topologies, and line parameters. But this information is needed to build and solve the global CC-OPF spanning multiple areas. To tackle these issues, this paper proposes a distributed CC-OPF method with confidentiality preservation, which enables regional ISOs to determine the optimal dispatchable generations within their regions without disclosing confidential data. This method does not require parameter tunings and will not suffer from convergence challenges. Results from IEEE test cases show that this method is highly accurate.

eess.SY↗

Control-aware Probabilistic Load Flow for Transmission Systems: An Analytical Method

Probabilistic load flow (PLF) calculation, as a fundamental tool to analyze transmission system behavior, has been studied for decades. Despite a variety of available methods, existing PLF approaches rarely take system control into account. However, system control, as an automatic buffer between the fluctuations in random variables and the variations in system states, has a significant impact on the final PLF result. To consider control actions' influence, this paper proposes the first analytical PLF method for the transmission grid that takes into account primary and secondary frequency controls. This method is based on a high-precision linear power flow model, whose precision is even further improved in this paper by an original correction approach. This paper also proves that if the joint probability distribution (JPD) of random variables is expressed by a Gaussian mixture model (GMM), then the JPD of system states (e.g., nodal voltages) is an infinite GMM. By leveraging this proposition, the proposed method can generate the joint PLF of the whole system, is applicable to random variables obeying any distributions, and is capable of capturing their correlation. The high accuracy and satisfactory efficiency of this method are verified on test cases scaling from 14 to 1354 buses.

eess.SY↗

Neural network analysis of neutron and X-ray reflectivity data: automated analysis using mlreflect, experimental errors and feature engineering

This work demonstrates the Python package mlreflect which implements an optimized pipeline for the automized analysis of reflectometry data using machine learning. The package combines several training and data treatment techniques discussed in previous publications. The predictions made by the neural network are accurate and robust enough to serve as good starting parameters for an optional subsequent least mean squares (LMS) fit of the data. It is shown that for a large dataset of 242 reflectivity curves of various thin films on silicon substrates, the pipeline reliably finds an LMS minimum very close to a fit produced by a human researcher with the application of physical knowledge and carefully chosen boundary conditions. Furthermore, the differences between simulated and experimental data and their implications for the training and performance of neural networks are discussed. The experimental test set is used to determine the optimal noise level during training. Furthermore, the extremely fast prediction times of the neural network are leveraged to compensate for systematic errors by sampling slight variations of the data.

physics.data-an↗

The stable behavior of low thermal conductivity in 1T-sandwich structure with different components

Designing materials with low thermal conductivity (\k{appa}) is of demand for thermal protection, heat insulation, thermoelectricity, etc. In this paper, based on the start-of-art first-principles calculations, we propose a framework of a 1T-sandwich structure for designing materials with low \k{appa}. The 1T-sandwich structure is the same as the well-known transition metal dichalcogenide (TMD) but with light Carbon atoms in the middle plane. Using different atoms to fill the outer positions, a few novel two-dimensional materials are constructed as study cases, i.e., Mg2C, Janus MgBeC, Be2C, and Mo2C. With a systematic and comparative study, the \k{appa} are calculated to be 3.74, 8.26, 14.80, 5.13 W/mK, respectively. The consistent values indicate the stable behavior of low \k{appa} in the 1T-sandwich structure, being insensitive to the component. Our study would help design advanced functional materials with reliable heat transfer performance for practical applications, which reduces the influence of unavoidable impurities.

cond-mat.mtrl-sci↗

The Volcspeech system for the ICASSP 2022 multi-channel multi-party meeting transcription challenge

This paper describes our submission to ICASSP 2022 Multi-channel Multi-party Meeting Transcription (M2MeT) Challenge. For Track 1, we propose several approaches to empower the clustering-based speaker diarization system to handle overlapped speech. Front-end dereverberation and the direction-of-arrival (DOA) estimation are used to improve the accuracy of speaker diarization. Multi-channel combination and overlap detection are applied to reduce the missed speaker error. A modified DOVER-Lap is also proposed to fuse the results of different systems. We achieve the final DER of 5.79% on the Eval set and 7.23% on the Test set. For Track 2, we develop our system using the Conformer model in a joint CTC-attention architecture. Serialized output training is adopted to multi-speaker overlapped speech recognition. We propose a neural front-end module to model multi-channel audio and train the model end-to-end. Various data augmentation methods are utilized to mitigate over-fitting in the multi-channel multi-speaker E2E system. Transformer language model fusion is developed to achieve better performance. The final CER is 19.2% on the Eval set and 20.8% on the Test set.

cs.SD↗

Assessment of nanoparticle immersion depth at liquid interfaces from chemically equivalent macroscopic surfaces

Hypothesis: We test whether the wettability of nanoparticles (NPs) straddling at an air/water surface or oil/water interface can be extrapolated from sessile drop-derived macroscopic contact angles (mCAs) on planar substrates, assuming that both the nanoparticles and the macroscopic substrates are chemically equivalent and feature the same electrokinetic potential. Experiments: Pure silica (SiO2) and amino-terminated silica (APTES-SiO2) NPs are compared to macroscopic surfaces with extremely low roughness (root mean square [RMS] roughness <= 2 nm) or a roughness determined by a close-packed layer of NPs (RMS roughness about 35 nm). Equivalence of the surface chemistry is assessed by comparing the electrokinetic potentials of the NPs via electrophoretic light scattering and of the macroscopic substrates via streaming current analysis. The wettability of the macroscopic substrates is obtained from advancing (ACAs) and receding contact angles (RCAs) and in situ synchrotron X-ray reflectivity (XRR) provided by the NP wettability at the liquid interfaces. Findings: Generally, the RCA on smooth surfaces provides a good estimate of NP wetting properties. However, mCAs alone cannot predict adsorption barriers that prevent NP segregation to the interface, as is the case with the pure SiO2 nanoparticles. This strategy greatly facilitates assessing the wetting properties of NPs for applications such as emulsion formulation, flotation, or water remediation.

physics.chem-ph↗

The synergistic modulation of electronic and geometry structures leads to ultra-low thermal conductivity of graphene-like borides (g-B3X5, X=N, P, As)

The design of novel devices with specific technical interests through modulating structural properties and bonding characteristics promotes the vigorous development of materials informatics. Herein, we propose a synergy strategy of component reconstruction by combining geometric configuration and bonding characteristics. With the synergy strategy, we designed a novel two-dimensional (2D) graphene-like borides, e.g. g-B3N5, which possesses counter-intuitive ultra-low thermal conductivity of 21.08 W/mK despite the small atomic mass. The ultra-low thermal conductivity is attributed to the synergy effect of electronics and geometry on thermal transport due to the combining reconstruction of g-BN and nitrogene. With the synergy effect, the dominant acoustic branches are strongly softened, and the scattering absorption and Umklapp process are simultaneously suppressed. Thus, the thermal conductivity is significantly lowered. To verify the component reconstruction strategy, we further constructed g-B3P5 and g-B3As5, and uncovered the ultra-low thermal conductivity of 2.50 and 1.85 W/mK, respectively. The synergy effect and the designed ultra-low thermal conductivity materials with lightweight atomic mass cater to the demand for light development of momentum machinery and heat protection, such as aerospace vehicles, high-speed rail, automobiles.

cond-mat.mtrl-sci↗

Topological Supercavity Resonances In the Finite System

Acoustic resonant cavities play a vital role in modern acoustical systems. They have led to many essential applications for noise control, biomedical ultrasonics, and underwater communications. The ultrahigh quality-factor resonances are highly desired for some applications like high-resolution acoustic sensors and acoustic lasers. Here, we theoretically propose and experimentally demonstrate a new class of supercavity resonances in a coupled acoustic resonators system, arising from the merged bound states in the continuum (BICs) in geometry space. We demonstrate their topological origin by explicitly calculating their topological charges before and after BIC merging, accompanied by charges annihilation. Comparing with other types of BICs, they are robust to the perturbation brought by fabrication imperfection. Moreover, we found that such supercavity modes can be linked with the Friedrich-Wintgen BICs supported by an entire rectangular (cuboid) resonator sandwiched between two rectangular (or circular) waveguides, and thus more supercavity modes are constructed. Then, we fabricate these coupled resonators and experimentally confirm such a unique phenomenon: moving, merging, and vanishing of BICs by measuring their reflection spectra, which show good agreement with the numerical simulation and theoretical prediction of mode evolution. Finally, given the similar wave nature of acoustic and electromagnetic waves, such merged BICs also can be constructed in a coupled photonic resonator system. Our results may find exciting applications in acoustic and photonics, such as enhanced acoustic emission, filtering, and sensing.

physics.app-ph↗

Improving Pseudo-label Training For End-to-end Speech Recognition Using Gradient Mask

In the recent trend of semi-supervised speech recognition, both self-supervised representation learning and pseudo-labeling have shown promising results. In this paper, we propose a novel approach to combine their ideas for end-to-end speech recognition model. Without any extra loss function, we utilize the Gradient Mask to optimize the model when training on pseudo-label. This method forces the speech recognition model to predict from the masked input to learn strong acoustic representation and make training robust to label noise. In our semi-supervised experiments, the method can improve the model performance when training on pseudo-label and our method achieved competitive results comparing with other semi-supervised approaches on the Librispeech 100 hours experiments.

eess.AS↗

Multi-task Federated Learning for Heterogeneous Pancreas Segmentation

Federated learning (FL) for medical image segmentation becomes more challenging in multi-task settings where clients might have different categories of labels represented in their data. For example, one client might have patient data with "healthy'' pancreases only while datasets from other clients may contain cases with pancreatic tumors. The vanilla federated averaging algorithm makes it possible to obtain more generalizable deep learning-based segmentation models representing the training data from multiple institutions without centralizing datasets. However, it might be sub-optimal for the aforementioned multi-task scenarios. In this paper, we investigate heterogeneous optimization methods that show improvements for the automated segmentation of pancreas and pancreatic tumors in abdominal CT images with FL settings.

cs.CV↗

Novel Two-Dimensional Layered MSi$_2$N$_4$ (M = Mo, W): New Promising Thermal Management Materials

With the miniaturization and integration of nanoelectronic devices, efficient heat removal becomes a key factor affecting the reliable operation of the nanoelectronic device. With the high intrinsic thermal conductivity, good mechanical flexibility, and precisely controlled growth, two-dimensional (2D) materials are widely accepted as ideal candidates for thermal management materials. In this work, by solving the phonon Boltzmann transport equation (BTE) based on first-principles calculations, we comprehensively investigated the thermal conductivity of novel 2D layered MSi$_2$N$_4$ (M = Mo, W). Our results point to competitive thermal conductivities (162 W/mK) of monolayer MoSi$_2$N$_4$, which is around two times larger than that of WSi$_2$N$_4$ and seven times larger than that of silicene despite their similar non-planar structures. It is revealed that the high thermal conductivity arises mainly from its large group velocity and low anharmonicity. Our result suggests that MoSi$_2$N$_4$ could be a potential candidate for 2D thermal management materials.

cond-mat.mtrl-sci↗

Giant anomalous Hall and anomalous Nernst Conductivities in Antiperovskites and their Tunability via Magnetic Fields

The anomalous Hall conductivity (AHC) and anomalous Nernst conductivity (ANC) are two prominent transport phenomena in ferromagnetic materials of a topological nature. Based on first-principles calculations, we evaluated the AHC and ANC of 35 cubic ferromagnetic antiperovskites (APVs) and observed giant AHC and ANC as large as 1128 S/cm and 6.27 AK-1m-1 for Co3LiN and Co3PtN, respectively. Detailed analysis reveals that the origin of giant ANC can be attributed to the occurrence of Weyl nodes near the Fermi energy, as demonstrated for Co3PtN. Interestingly, both the magnitude and sign of AHC and ANC can be tuned by changing the magnetization (M) directions, which could be applied to realize spin-caloritronics devices.

cond-mat.mtrl-sci↗

Anomalously low thermal conductivity of two-dimensional GaP monolayers: A comparative study of the group GaX (X = N, P, As)

With the successful synthesis of the two-dimensional (2D) gallium nitride (GaN) in a planar honeycomb structure, the phonon transport properties of 2D GaN have been reported. However, it remains unclear for the thermal transport in Ga-based materials by substituting N to other elements in the same main group, which is of more broad applications. In this paper, based on first-principles calculations, we performed a comprehensive study on the phonon transport properties of 2D GaX (X = N, P, and As) with planar or buckled honeycomb structures. The thermal conductivity of GaP (1.52 Wm-1K-1) is found unexpectedly ultra-low, which is in sharp contrast to GaN and GaAs despite their similar honeycomb geometry structure. Based on PJTE theory, GaP and GaAs stabilize in buckling structure, different from the planar structure of GaN. Compared to GaN and GaAs, strong phonon-phonon scattering is found in GaP due to the strongest phonon anharmonicity. Given electronic structures, deep insight is gained into the phonon transport that the delocalization of electrons in GaP is restricted due to the buckling structure. Thus, non-bonding lone pair electrons of P atoms induce nonlinear electrostatic forces upon thermal agitation, leading to increased phonon anharmonicity in the lattice, thus reducing thermal conductivity. Our study offers a fundamental understanding of phonon transport in GaX monolayers with honeycomb structure, which will enrich future studies of nanoscale phonon transport in 2D materials

cond-mat.mtrl-sci↗

A Phylogenetic Trees Analysis of SARS-CoV-2

One regards spaces of trees as stratified spaces, to study distributions of phylogenetic trees. Stratified spaces with may have cycles, however spaces of trees with a fixed number of leafs are contractible. Spaces of trees with three leafs, in particular, are spiders with three legs. One gives an elementary proof of the stickiness of intrinsic sample means on spiders. One also represents four leafs tree data in terms of an associated Petersen graph. One applies such ideas to analyze RNA sequences of SARS-CoV-2 from multiple sources, by building samples of trees and running nonparametric statistics for intrinsic means on tree spaces with three and four leafs. SARS-CoV-2 are also used to built trees with leaves consisting in addition to other related coronaviruses.

stat.ME↗

A fault detection scheme for PV panels in large scale PV stations with complex installation conditions

Faults in photovoltaic (PV) systems can seriously affect the efficiency, energy yield as well as the security of the entire PV plant, if not detected and corrected quickly. Therefore, fault diagnosis of PV arrays is indispensable for improving the reliability, efficiency, productivity and safety of PV power stations. Instead of conventional thresholding methods and artificial intelligent (AI) machine learning approaches, an innovative Gaussian Mixture Model (GMM) based fault detection approach is proposed in this work. This approach combines the superiority of GMM in modeling stochastic power outputs of PV modules and the flexibility and simplicity of Sandia PV Array Performance Model (SPAM) to accurately detect under-performing modules. Firstly, GMM is proposed to represent the probabilistic distribution functions (PDF) of different PV modules' power outputs, and the parameter sets of which are obtained by Expectation Maximization algorithm. Secondly, a simplified explicit expression for output power of PV modules, which highlights the influences of tilt and azimuth angles, is deduced based on the SPAM. Then, an orientation independent vector C is developed to eliminate the probability distribution differences of power outputs caused by varying azimuth angles and tilt angles. Jensen-Shannon (JS) divergence, which captures the differences between probability density of C of each PV module, are generated and used as fault indicators. Simulation data acquired from the original SPAM are used to assess the performance of the proposed approach. Results show that the proposed approach successfully detects faults in PV systems. This work is especially suitable for the PV modules that have different installation parameters such as azimuth angles and tilt angles, and it does not require the use of irradiance or temperature sensors.

eess.SY↗

An Ultrahigh-Q Microresonator on 4H-silicon-carbide-on-insulator Platform for Multiple Harmonics, Cascaded Raman Lasing and Kerr Comb Generations

The realization of ultrahigh quality (Q) resonators regardless of the underpinning material platforms has been a ceaseless pursuit, because the high Q resonators provide an extreme environment of storage of light to enable observations of many unconventional nonlinear optical phenomenon with high efficiencies. Here, we demonstrate an ultra-high Q factor (7.1*10^6) microresonator on the 4H-silicon-carbide-on-insulator (4H-SiCOI) platform in which both \c{hi}^(2) and \c{hi}^(3) nonlinear processes of high efficiencies have been generated. Broadband frequency conversions, including second-, third-, fourth-harmonic generation were observed. Cascaded Raman lasing was demonstrated in the SiC microresonator for the first time to the best of our knowledge. Broadband Kerr frequency combs covering from 1300 to 1700 nm were achieved using a dispersion-engineered SiC microresonator. Our demonstration is a significant milestone in the development of SiC photonic integrated devices.

physics.optics↗

Inverse design of crystal structures for multicomponent systems

We developed an inverse design framework enabling automated generation of stable multi-component crystal structures by optimizing the formation energies in the latent space based on reversible crystal graphs with continuous representation. It is demonstrated that 9,160 crystal structures can be generated out of 50,000 crystal graphs, leading to 8,310 distinct cases using a training set of 52,615 crystal structures from Materials Project. Detailed analysis on 15 selected systems reveals that unreported crystal structures below the convex hull can be discovered in 6 material systems. Moreover, the generation efficiency can be further improved by considering extra hypothetical structures in the training. This paves the way to perform inverse design of multicomponent materials with possible multi-objective optimization.

cond-mat.mtrl-sci↗

Sound Trapping in an Open Resonator

The ability of extreme sound energy confinement with high-quality factor (Q-factor) resonance is of vital importance for acoustic devices requiring high intensity and hypersensitivity in biological ultrasonics, enhanced collimated sound emission (i.e. sound laser) and high-resolution sensing. However, structures reported so far demonstrated a limited quality factor (Q-factor) of acoustic resonances, up to several tens in an open resonator. The emergence of bound states in the continuum (BIC) makes it possible to realize high-Q factor acoustic modes. Here, we report the theoretical design and experimental demonstration of acoustic BICs supported by a single open resonator. We predicted that such an open acoustic resonator could simultaneously support three types of BICs, including symmetry protected BIC, Friedrich-Wintgen BIC induced by mode interference, as well as a new kind of BIC: mirror-symmetry induced BIC. We also experimentally demonstrated the existence of all three types of BIC with Q-factor up to one order of magnitude greater than the highest Q-factor reported in an open resonator.

physics.app-ph↗