Searcharxiv⌕ Search

arXiv subjects

Chen Yao

Publications and source records attributed to Chen Yao.

12 recordsLinked to original sources
arXiv2026

HyMem: Hybrid Memory Architecture with Dynamic Retrieval Scheduling

Large language model (LLM) agents demonstrate strong performance in short-text contexts but often underperform in extended dialogues due to inefficient memory management. Existing approaches face a fundamental trade-off between efficiency and effectiveness: memory compression risks losing critical details required for complex reasoning, while retaining raw text introduces unnecessary computational overhead for simple queries. The crux lies in the limitations of monolithic memory representations and static retrieval mechanisms, which fail to emulate the flexible and proactive memory scheduling capabilities observed in humans, thus struggling to adapt to diverse problem scenarios. Inspired by the principle of cognitive economy, we propose HyMem, a hybrid memory architecture that enables dynamic on-demand scheduling through multi-granular memory representations. HyMem adopts a dual-granular storage scheme paired with a dynamic two-tier retrieval system: a lightweight module constructs summary-level context for efficient response generation, while an LLM-based deep module is selectively activated only for complex queries, augmented by a reflection mechanism for iterative reasoning refinement. Experiments show that HyMem achieves strong performance on both the LOCOMO and LongMemEval benchmarks, outperforming full-context while reducing computational cost by 92.6\%, establishing a state-of-the-art balance between efficiency and performance in long-term memory management.

cs.AI↗
arXiv2026

Urban Neural Surface Reconstruction from Constrained Sparse Aerial Imagery with 3D SAR Fusion

Neural surface reconstruction (NSR) has recently shown strong potential for urban 3D reconstruction from multi-view aerial imagery. However, existing NSR methods often suffer from geometric ambiguity and instability, particularly under sparse-view conditions. This issue is critical in large-scale urban remote sensing, where aerial image acquisition is limited by flight paths, terrain, and cost. To address this challenge, we present the first urban NSR framework that fuses 3D synthetic aperture radar (SAR) point clouds with aerial imagery for high-fidelity reconstruction under constrained, sparse-view settings. 3D SAR can efficiently capture large-scale geometry even from a single side-looking flight path, providing robust priors that complement photometric cues from images. Our framework integrates radar-derived spatial constraints into an SDF-based NSR backbone, guiding structure-aware ray selection and adaptive sampling for stable and efficient optimization. We also construct the first benchmark dataset with co-registered 3D SAR point clouds and aerial imagery, facilitating systematic evaluation of cross-modal 3D reconstruction. Extensive experiments show that incorporating 3D SAR markedly enhances reconstruction accuracy, completeness, and robustness compared with single-modality baselines under highly sparse and oblique-view conditions, highlighting a viable route toward scalable high-fidelity urban reconstruction with advanced airborne and spaceborne optical-SAR sensing.

cs.CV↗
arXiv2025

Comparison Research of Millimeter-Wave/Infrared Co-aperture Reflector Antenna Systems Based on a Specialized Film

This paper presents a novel co-aperture reflector antenna operating in millimeter-wave (MMW) and infrared (IR) for cloud detection radar. The proposed design combines a back-fed dual-reflector antenna, an IR optical reflection system, and a specialize thin film with IR-reflective/MMW-transmissive properties. Simulations demonstrate a gain exceeding 50 dBi within 94 GHz plush or minus 500 MHz bandwidth, with 0.46{\deg} beamwidth in both azimuth (E-plane) and elevation (H-plane) and sidelobe levels below -25 dB. This co-aperture architecture addresses the limitations of standalone MMW and IR radars, enabling high-resolution cloud microphysical parameter retrieval while minimizing system footprint. The design lays a foundation for airborne/spaceborne multi-mode detection systems.

eess.SP↗
arXiv2025

A Macroscopically Consistent Reactive Langevin Dynamics Model

Particle-based stochastic reaction-diffusion (PBSRD) models are a popular approach for capturing stochasticity in reaction and transport processes across biological systems. In some contexts, the overdamped approximation inherent in such models may be inappropriate, necessitating the use of more microscopic Langevin Dynamics models for spatial transport. In this work we develop a novel particle-based Reactive Langevin Dynamics (RLD) model, with a focus on deriving reactive interaction kernels that are consistent with the physical constraint of detailed balance of reactive fluxes at equilibrium. We demonstrate that, to leading order, the overdamped limit of the resulting RLD model corresponds to the volume reactivity PBSRD model, of which the well-known Doi model is a particular instance. Our work provides a step towards systematically deriving PBSRD models from more microscopic reaction models, and suggests possible constraints on the latter to ensure consistency between the two physical scales.

physics.bio-ph↗
arXiv2024

Terahertz channel power and BER performance in rain

Terahertz (THz) communications have emerged as a promising technology for 6G networks due to their potential for achieving terabit-per-second data rates. However, the impact of rainfall on THz channel characteristics remains incompletely understood, particularly regarding power attenuation mechanisms and bit error rate (BER) performance. This article presents a systematic measurement-based and theoretical investigation of line-of-sight (LoS) THz channel behavior under rainfall conditions, methodically examining both power attenuation mechanisms and bit error rate (BER) performance. Our experimental campaign, conducted at frequencies of 220-230 GHz over a 54-meter outdoor channel, is complemented by analytical frameworks incorporating ITU-R and Mie scattering models. The study reveals that while rain induces significant power attenuation, multipath scattering effects remain minimal, with Rician K-factors maintaining high values. Notably, we observe substantial variations in power loss under constant rain rates, attributed to dynamic changes in raindrop size distribution. Comparative analysis demonstrates superior BER performance of Quadrature Amplitude Modulation (QAM) in rainfall conditions, while revealing increased environmental sensitivity at higher frequencies. These findings underscore the necessity for adaptive modulation schemes and strategic frequency planning in future THz communication systems.

physics.app-ph↗
arXiv2024

ProcessPainter: Learn Painting Process from Sequence Data

The painting process of artists is inherently stepwise and varies significantly among different painters and styles. Generating detailed, step-by-step painting processes is essential for art education and research, yet remains largely underexplored. Traditional stroke-based rendering methods break down images into sequences of brushstrokes, yet they fall short of replicating the authentic processes of artists, with limitations confined to basic brushstroke modifications. Text-to-image models utilizing diffusion processes generate images through iterative denoising, also diverge substantially from artists' painting process. To address these challenges, we introduce ProcessPainter, a text-to-video model that is initially pre-trained on synthetic data and subsequently fine-tuned with a select set of artists' painting sequences using the LoRA model. This approach successfully generates painting processes from text prompts for the first time. Furthermore, we introduce an Artwork Replication Network capable of accepting arbitrary-frame input, which facilitates the controlled generation of painting processes, decomposing images into painting sequences, and completing semi-finished artworks. This paper offers new perspectives and tools for advancing art education and image generation technology.

cs.CV↗
arXiv2024

Deep Learning-based Cross-modal Reconstruction of Vehicle Target from Sparse 3D SAR Image

Three-dimensional synthetic aperture radar (3D SAR) is an advanced active microwave imaging technology widely utilized in remote sensing area. To achieve high-resolution 3D imaging,3D SAR requires observations from multiple aspects and altitude baselines surrounding the target. However, constrained flight trajectories often lead to sparse observations, which degrade imaging quality, particularly for anisotropic man-made small targets, such as vehicles and aircraft. In the past, compressive sensing (CS) was the mainstream approach for sparse 3D SAR image reconstruction. More recently, deep learning (DL) has emerged as a powerful alternative, markedly boosting reconstruction quality and efficiency. However, existing DL-based methods typically rely solely on high-quality 3D SAR images as supervisory signals to train deep neural networks (DNNs). This unimodal learning paradigm prevents the integration of complementary information from other data modalities, which limits reconstruction performance and reduces target discriminability due to the inherent constraints of electromagnetic scattering. In this paper, we introduce cross-modal learning and propose a Cross-Modal 3D-SAR Reconstruction Network (CMAR-Net) for enhancing sparse 3D SAR images of vehicle targets by fusing optical information. Leveraging cross-modal supervision from 2D optical images and error propagation guaranteed by differentiable rendering, CMAR-Net achieves efficient training and reconstructs sparse 3D SAR images, which are derived from highly sparse-aspect observations, into visually structured 3D vehicle images. Trained exclusively on simulated data, CMAR-Net exhibits robust generalization to real-world data, outperforming state-of-the-art CS and DL methods in structural accuracy within a large-scale parking lot experiment involving numerous civilian vehicles, thereby demonstrating its strong practical applicability.

cs.CV↗
arXiv2024

Are We Ready for Planetary Exploration Robots? The TAIL-Plus Dataset for SLAM in Granular Environments

So far, planetary surface exploration depends on various mobile robot platforms. The autonomous navigation and decision-making of these mobile robots in complex terrains largely rely on their terrain-aware perception, localization and mapping capabilities. In this paper we release the TAIL-Plus dataset, a new challenging dataset in deformable granular environments for planetary exploration robots, which is an extension to our previous work, TAIL (Terrain-Aware multI-modaL) dataset. We conducted field experiments on beaches that are considered as planetary surface analog environments for diverse sandy terrains. In TAIL-Plus dataset, we provide more sequences with multiple loops and expand the scene from day to night. Benefit from our sensor suite with modular design, we use both wheeled and quadruped robots for data collection. The sensors include a 3D LiDAR, three downward RGB-D cameras, a pair of global-shutter color cameras that can be used as a forward-looking stereo camera, an RTK-GPS device and an extra IMU. Our datasets are intended to help researchers developing multi-sensor simultaneous localization and mapping (SLAM) algorithms for robots in unstructured, deformable granular terrains. Our datasets and supplementary materials will be available at \url{https://tailrobot.github.io/}.

cs.RO↗
arXiv2024

TAIL: A Terrain-Aware Multi-Modal SLAM Dataset for Robot Locomotion in Deformable Granular Environments

Terrain-aware perception holds the potential to improve the robustness and accuracy of autonomous robot navigation in the wilds, thereby facilitating effective off-road traversals. However, the lack of multi-modal perception across various motion patterns hinders the solutions of Simultaneous Localization And Mapping (SLAM), especially when confronting non-geometric hazards in demanding landscapes. In this paper, we first propose a Terrain-Aware multI-modaL (TAIL) dataset tailored to deformable and sandy terrains. It incorporates various types of robotic proprioception and distinct ground interactions for the unique challenges and benchmark of multi-sensor fusion SLAM. The versatile sensor suite comprises stereo frame cameras, multiple ground-pointing RGB-D cameras, a rotating 3D LiDAR, an IMU, and an RTK device. This ensemble is hardware-synchronized, well-calibrated, and self-contained. Utilizing both wheeled and quadrupedal locomotion, we efficiently collect comprehensive sequences to capture rich unstructured scenarios. It spans the spectrum of scope, terrain interactions, scene changes, ground-level properties, and dynamic robot characteristics. We benchmark several state-of-the-art SLAM methods against ground truth and provide performance validations. Corresponding challenges and limitations are also reported. All associated resources are accessible upon request at \url{https://tailrobot.github.io/}.

cs.RO↗
arXiv2022

Predict the Rover Mobility over Soft Terrain using Articulated Wheeled Bevameter

Robot mobility is critical for mission success, especially in soft or deformable terrains, where the complex wheel-soil interaction mechanics often leads to excessive wheel slip and sinkage, causing the eventual mission failure. To improve the success rate, online mobility prediction using vision, infrared imaging, or model-based stochastic methods have been used in the literature. This paper proposes an on-board mobility prediction approach using an articulated wheeled bevameter that consists of a force-controlled arm and an instrumented bevameter (with force and vision sensors) as its end-effector. The proposed bevameter, which emulates the traditional terramechanics tests such as pressure-sinkage and shear experiments, can measure contact parameters ahead of the rover's body in real-time, and predict the slip and sinkage of supporting wheels over the probed region. Based on the predicted mobility, the rover can select a safer path in order to avoid dangerous regions such as those covered with quicksand. Compared to the literature, our proposed method can avoid the complicated terramechanics modeling and time-consuming stochastic prediction; it can also mitigate the inaccuracy issues arising in non-contact vision-based methods. We also conduct multiple experiments to validate the proposed approach.

cs.RO↗
arXiv2021

Machine Learning Applications on Neuroimaging for Diagnosis and Prognosis of Epilepsy: A Review

Machine learning is playing an increasingly important role in medical image analysis, spawning new advances in the clinical application of neuroimaging. There have been some reviews on machine learning and epilepsy before, and they mainly focused on electrophysiological signals such as electroencephalography (EEG) and stereo electroencephalography (SEEG), while neglecting the potential of neuroimaging in epilepsy research. Neuroimaging has its important advantages in confirming the range of the epileptic region, which is essential in presurgical evaluation and assessment after surgery. However, it is difficult for EEG to locate the accurate epilepsy lesion region in the brain. In this review, we emphasize the interaction between neuroimaging and machine learning in the context of epilepsy diagnosis and prognosis. We start with an overview of epilepsy and typical neuroimaging modalities used in epilepsy clinics, MRI, DWI, fMRI, and PET. Then, we elaborate two approaches in applying machine learning methods to neuroimaging data: i) the conventional machine learning approach combining manual feature engineering and classifiers, ii) the deep learning approach, such as the convolutional neural networks and autoencoders. Subsequently, the application of machine learning on epilepsy neuroimaging, such as segmentation, localization, and lateralization tasks, as well as tasks directly related to diagnosis and prognosis are looked into in detail. Finally, we discuss the current achievements, challenges, and potential future directions in this field, hoping to pave the way for computer-aided diagnosis and prognosis of epilepsy.

cs.LG↗